Connecting two routers to create a home network and have access to the net "wired"

How do i set up a network between two linksys routers that can access the internet and computers set up on both routers. I noticed I cannot browse our home network computers that are behind the other router. currently i have a net connection going to router 1 and a cable from that router going to the wan port on router two. I cannont access router 1 computers from router 2. thank you for your help!

See here.

Similar Messages

Successfully set up TC (the latest one) for MBP. I can access to TC wirelessly. Tried to access from my PC too but PC does not even detect TC (as storage), while PC is connected in the same network and can access to the internet. Anything missed?

Successfully set up TC (the latest one) for MBP. I can access to TC wirelessly. Tried to access from my PC too but PC does not even detect TC (as storage), while PC is connected in the same network and can access to the internet. Anything missed?

Load the airport utility for windows.. it has several parts.. the key one is bonjour for windows which helps windows find apple network devices.
The TC should also be setup with names that windows can use.. ie short, no spaces and pure alphanumeric.
So Fred Blog's Airport Time Capsule
Is not a valid windows name.
TCgen5 is.

The 3G symbol is not showing up on my home screen and I cannot browse the net, any suggestions?

The 3G symbol does not show up on my home page and I cannot browse the Internet or receive mail. Any advice?

reset the iphone
1. press the wake/sleep button the top until you get the red slider
2. Slide to power off
3. Wait for phone to power off (you get a spinning gear icon for a while)
4. press the wake/sleep button to turn in back on.
if that doesn't work reset network settings
1. Go to Settings->General->Reset->Reset Network Settings
2. Confirm that you want to do this and the phone will restart itself
if that doesn't work restore the phone in iTunes, but you will want to sync all of your data before you do that.

TS1398 I updated my iPhone 4S to iOS 6. Now every time I connect to my home network I have to input the routers passcode why is this happening?

Every time since I upgraded both my iPhone 4S and my iPod touch when I go to connect to my wi if home network. I am asked to input the network passcode. This never happened before I upgraded. ( this is a known network). Cn anyone help?

I noticed that my camera app crashes when panorama mode is engaged - but only if the sound is switched off.

I Pad won't connect. I choose my own home network and get "unable to join"

My new Ipad 2 won't connect to my home network. I get an "unable to connect' error message. Frustrating.

i got the same promble.at home too.. i got no promble at work.. why?? someone help..

Every 2 days i lose connection to home network and when i put the network key in (with the caps) it dismisses it

every 2 days i lose connection ,since they did software upgrade in oct. now it just dismisses me when i insert the network key for password. i am using the caps

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

N95 Wifi, home network and hidden access points

Hello-
Just picked up a N95 and having some problems. First, my home network doesn't broadcast a SSID. I stumbled across the home network option and was able to configure it. However, it's never an option when I need an internet connection; e.g., it never shows up in the wlan list.
So, how do I congigure a hidden access point so I can use it? The user guide says you should be able to do it manually, but doesn't go into any details.
Secondly, exactly what is the home network setting for and why is it separate from the other wlan settings?
Thanks,
Jay

Jay,
I too have a hidden network (SSID not broadcast), the N95 seems to have a problem with this. It may or may not show up on the active standby screen (on my Voda N95, it shows up when I take my sim out!).
To configure your accesss point :-
Tools / Settings / Connection / Access Points
then Options / New access point
Connection name
(enter a name, whatever you want to call it)
Data bearer
=wireless LAN
WLAN network name
(enter your SSID here)
Network Status
(public or hidden)
WLAN network mode
(Infrastructure or ad-hoc. If you're using a router, infracstructure should be the one you want)
WLAN security mode
(Open, WEP, 802.1x or WPA2. Check your router)
WLAN security settings
WPA/WPA2
EAP or Pre-shared key (consult your router)
EAP plug-in settings or Pre-shared key
(which one you get depends on what you set above)
WPA2 only mode
(leave alone)
Having done all this it still won't show on the active-standy screen (at least it doesn't on mine) in the WLAN section BUT if you know try and surf the web it should ask which access point you want to use - assuming you've got it set to 'always ask'. What this seems to do is only list the connections that it can find (i.e if you've got a 'Starbucks' and a 'home' connection defined, it'll only show 'home' at home and 'Starbucks' when you're getting your latte. The standby screen may show, how to decribe it, a four leaf clover near to the battery level indicator, this is the indication that it's either found or connected to your wireless lan.
I think the 'Home netw.' option is for use with the Home Media Server application supplied on the CD. I haven't tried it so can't confirm for sure.
Hope this helps,
Simon
E&OE
Sony CMD-Z1, Nokia 8110, Nokia 6210, Nokia 6610 (returned within a week), Nokia 6600 (twice), N95, 3109c & N97.

Suggestions for NAS for home network and remote access to clients

I have a photo studio in my home and will need to get the digital files to my clients roughly once a week. i am currently using dropbox, but was thinking of purchasing a NAS that I could use for this purpose,as well as for my home network needs, mainly itunes and photos of the kid...
any suggestions for a mac friendly NAS , and how it can be accesed by my client over the internet?
can a NAS be accessed like a FTP site, using fetch or another FTP client?
thank for any help.
-thomas

Hi Thomas,
I have had similar considerations and finally chose QNAP 439 Pro II over the many other ones out there (LinkSys, NetGear, Bufallo, etc.). Without going into technical details, the main reason for my choice were easy-of-use, functionalities and scalability:
http://www.qnap.com/prodetail_feature.asp?pid=148
It's not the cheapest solution out there, but works great with the Mac, even acts as storage solution for TimeMachine (with latest firm ware). And implementing client access is easy.
Hope this helps.
Kind regards,
Mark

In my preferences on my mac mini when i click it, i find the lock the open even after changing the password what would cause this?I use my home wifi network and have never given the password out,as I asked what could cause this?

What could cause the lock in my preferences to seemingly to click open on there own,I use my home wifi network which is private and have never given out that password either for my network or preferences password.....help,Thank you

You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception.

Can I create a home network withous dsl connection with airport express

can I create a home network without dsl connection with airport express?
So it means I can't connect to my HP Airprint/Wireless printer without exretnal connection through ISP?? Just need to print from my Mac and iphone. I have Vodafone Prepaid connection, which is directly connected to my Mac. Does that make an internal network possible?

You have to set up the Air Port with an internet connection to set up a network. Do you have a modem? If yes you can set up the network.

Do I need to have Airport Express to connect to other computers on our homer network?

Do I need to have Airport Express to connect to other computers on our homer network?

Not necessarily. You could use the "Create Network" feature of your MBP's built-in AirPort card to provide an Ad-hoc wireless network for local wireless-capable computers to connect to.

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

Connect as... no longer works. Cannot connect to other computers on my home network.

I have a home network and it's been unchanged for years. Never had any issue with connecting to other computers, all of which are Macs running OS X. Now, if I click Connect As, nothing happens. Double-clicking the other computer in the Finder's sidebar or using Go To Server, etc. yields nothing. Even odder; the other machines no longer see me at all. No one has any Firewall on. File sharing is on for all machines. We're all on the same subnet and the same network, yet every other machine can connect to one another but not mine. Thoughts? Restarting has not helped. Thanks.

If you are getting the error message that the server won't allow any more users to connect, and to try again later, this seems to be a problem with AFP sharing in Lion.
The workaround for this so far is to go to System Preferences > Sharing > File Sharing and click on Options... On that window, turn OFF "Share files and folders using AFP" and turn ON "Share files and folders using SMB (Windows)" Click Done to go back to the sharing window and you should see a green dot followed by "Windows Sharing: On"
Give that a try.

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?

Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

Recently I was working on my home Network and lost my Password for my Home wireless connection. After many attempts, I remembered the password and was able to get in. Now the MacBook Pro only works at home on a Hard wire connection. I have an additional 9

Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

Connecting two routers to create a home network and have access to the net "wired"

Similar Messages

Maybe you are looking for