Connecting Two SLDs in r XI Landscape

Hi Folks,
We have set up two SLDs for our XI landscape. One SLD for Development/QA and second one for Production. I have configured all the post install steps on XI Production System including SLD config steps.
I would like to know the steps for connecting both the SLDs.
I have seen number of Wlogs/forum discussions, but little bit confused on where to start. Due to shortage of time, please suggest right Wlog or any other documents which meets my requirements.
Your help in this regard would be highly appreciated.
Regards
Chandu

Hi,
just have a look at this SAP note: 720717
(it shows how to change SLD - so how to connect them too)
and this doc:
https://websmp104.sap-ag.de/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Similar Messages

Connection to central SLD through out the landscape.

Dear Basis gurus,
We have installed ERP 6.0, XI, EP, BI 7.0 systems, we decided to configure central SLD in the XI system.
EP, BI systems are configured with SLD a local configuration. we need to connect them to central SLD which is there in the XI system.
I would be greatful to you , if you can provide any guidance how to connect local SLDs which is there in BI, EP to the XI SLD.
Thanks and Regards
Purna.

From the ABAP backend systems go to RZ70 and specify the Host and Service of the PI system in the section SLD Bridge
Once done your schedule the Data collection using the execute button
For the JAVA part
Open Visual Admin from the backend systems
Go to Server0->Services->SLD Datasupplier
You supplied all the required info like "Hostname " portname etc.
After giving all this information , try to initiate a Data transfer using the icon there(above the runtime tab) its like a arrow pointing downwards.
After clicking on that icon wait for sometime and see whether you get the message "Data transfered sucessfully"
Gerard

Two NWDI systemes in one landscape

Hi all,
I was wondering if it is possible to have two NWDI systems in one landscape (sharing same SLD) and do track forwarding between these two NWDI systems?
The reason I want to do this is that I want to move the NWDI system to another platform. To avoid a big bang situation I would like for the developers to be able to "forward" the code from one server to the other as they like (over time).
Do any of you have eny experience in this area?
Thanks.
Regards
Paw Iversen

Hi,
First of all thanks for your quick reply.
Our situation is that we have a existing NWDI system connected to one SLD. We would like to install a second NWDI system connected to the same SLD. We would then like to close down the "old" NWDI system. But in order to save the development components from old SLD we need some form of transport to the "new" NWDI system. A possible solution I thought of could be to create new tracks in the "new" NWDI and forward the existing SCs from the "old" NWDI system to the "new" NWDI system.
The reason we want to do this is because we would like to move the old NWDI system to a new platform without doing a system copy.
My question is then if its possible to make this kind of forwarding between two NWDI systems (connected to the same SLD to share component information).
Best regards
Paw Iversen

SLD architecture in the landscape

Hi,
How many SLDs should be there in the landscape. Should there be only one SLD for DEV, QAS & PRD or should there be two SLDs; one for DEV-QAS & other for PRD or 3 SLDs; each for DEV, QAS & PRD. Also please support your replies with reasons.

Hi,
We use 2 SLD's, one for DEV, QAS and sandboxes, and another one for PRD.
The advantage is that we have a test SLD, and that the production SLD will stay clean. The disadvantage is for exemple when data from a test system needs to be sent to the PRD system, then you'll need to change the SLD connection of the system.
More info on SLD planning in the [SLD Planning Guide|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0a1a8fb-0527-2a10-f781-8b67eab16582]

Integration Engine does not connect with SLD

Hi all,
We have an XI 3.0 system that acts as QUA system in our track. This XI 3.0 system is connected to a central SLD installed on a PI 7.1 system that acts as our DEV system.
Everything seems to be OK in the Java part. We refresh the caches successfully and enter the SLD in DEV system.
We have a problem, though with the SXI_CACHE transaction. It shows the following message:
"Unable to refresh cache contents.Error during last attempt to refresh cache"
And the detail of the error is: "LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM"
We have checked in the SLD and the Business system is created.
In transaction SXMB_ADM when checking the Integration Engine connection with SLD we get the following error: "No access to system landscape at present"
In the Runtime Workbench of the system, when checking the Cache Connection, the Integration Engine part shows a warning. In the RWB also the Self Status Check of the Integration Engine gives errors:
"Are roles in SXMS_CONF_ITEMS and SLD consistent?"
We have already followed all the post installation guides, and the cache checks, and SLD checks guides.
Do you know which the soltion could be for our error??
Thanks!

Hi,
We have checkes
SM59: TCP/IP Destination: LCRSAPRFC y SAPLSDAPI. check the program ID is correct.--> connection test goes OK
HTTP destination: INTEGRATION_DIRECTORY_HMI: do a test connection: result=500--> connection test gives us 500 result
SLDAPICUST: Check the user and password and the server defined. the PI server should be the main server.--> checked, OK
SXMB_ADM>Integration Engine Configuration: Check if the destination is properly defined. should be dest://http://<server><port>/sap/xi/engine?type=entry> checked. OK
Check RZ70: wich configuration you have there?--> The configuration in the RZ70 for the SLD is pointing to the DEV system, so it is correct
SLDCHECK results:
"Properties of RFC destination SAPSLDAPI
RFC host:        %%RFCSERVER%%
program id:      SAPSLDAPI_XXX
gateway host:    XXXX
gateway service: XXXXX
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name:   XXXXX
port number: 50000
user       : XIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
    (...more...)
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found for system XXX      client 450
=> Check and maintain the SLD content for the current client
Summary: Connection to SLD works technically, but the SLD content may need maintenance
=> Check and maintain the SLD data content
*Unable to refresh cache contents.Error during last attempt to refresh cache" * this error is related with the RFC destination type HTTP. ( HTTP destination: INTEGRATION_DIRECTORY_HMI: do a test connection: result=500)

Test Connection in SLD fails.

Hello,
When I test connection for SLD in content administrator (web dynpro), I get
Connection to SLD could not be opened successfully.
And when I open a web dynpro that uses RFC I get an exception.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'WD_WATCH_RFC_METADATA_DEST' in the SLD. No such JCO destination is defined in the SLD.
what could be the issue.
Thanks
Tony

Hi Tony,
Configure your SLD and then create the JCO Destinations.
Check the following document which clearly explains the process of System Landscape Directory and JCo Configuration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5
Thanks & Regards,
Jhansi Miryala

Connect two Solution Manager systems.

Hello,
We are planning to couple two Solution Manager systems.
We want to get all the alerts ABAP+JAVA(Root Cause) from one Solution Manager to the other.
What are te steps to take?
Connect the SLD's?
Connect the systems thru RFC?
Point all the agents to the 2 Solution Manager systems?
Regards,
Mike Geluk

Hello,
It is possible.
For SLD, two options:
- Each Solution Manager can use its own SLD. Then you must define the other server in the SLD, and vice-versa.
- Each Solution manager can connect to a central SLD where the two are defined.
The rest is just like any other managed system configuration: follow the steps in solman_setup.
Best regards,
Guiilherme

Two SLDs with separate XI-systems behind - transport content

Hello,
we have two SLDs, one for dev. Xi and one for prod XI.
So per SLD only one XI is known.
On SLD dev we implemented all required R/3 systems and included the transport groups to the systems and the transport connection (dev. syst to prod. syst).
So here the prod R/3 has as connected XI the dev XI!
Now we want to move the content of the dev SLD to the prod SLD.
What will happen to the related XI system in the business systems.
Do we have only have to change them in the destination prod. SLD?
Best regards
Dirk

Hi Shankar,
thanks for the detailed work on my question.
Unfortunately it wasn´t me who had to organize the environment.
Customer made the installation and then was asking for external consultancy.
So the situation was fixed a little bid away from simple logic.
For a go live at end of the year we will use this construction.
Next year customer plans to implement a new central SLD (including portals issues).
Then we will do another move with our SLD content.
Until then customers Xi guys can train a little bit on moving SLD content
to ensure that both SLDs have the same systems implemented.
Only to complete that:
To use transport groups you need prod XI and dev XI both on one SLD else you cannot link the R/3 systems to dev and prod area because transport groups have to be linked to the XI systems on the SLD.
So, my question was a little bit useless!
We had no prod XI available on the dev SLD.
From this issue my question was coming up.
We will add the dev XI to the prod SLD too.
Then moving content won´t cause any problems, I think!
Regards
Dirk
Message was edited by:
Dirk Meinhard

Is there a way to connect two analog mics recording in stereo to the iPad for recording?

I currently use an M-Audio Mobile Pre to connect two microphones to my MacBook Pro via USB. If I wanted to use my iPad (or even iPhone) instead, is there a way to get the stereo input into the iPad? Would the Line 6 Sonic Port sold via Apple work? Would it take 2 separate inputs and deliver stereo to Garage Band or another recording app? Or is there another way?

Exactly that -- the procedure is described in the online Help: InDesign Help | Text variables
Now every time you insert the variable named "# of potatoes", you'll see the text "50" appear (with a minimal rectangular marker to indicate it's a variable), and when you want another number of potatoes, all you have to do is adjust the text in the Variables dialog.

Connect two external monitors to mini DP(using a mini DP to VGA adapter) and the VGA out at once

I am trying to connect two external monitors to mini DP(using a mini DP to VGA adapter) and the VGA out at once. Windows recognize both monitors as well. But it dowsn't let me use all three monitors at once(see the below image). In the dropdown, it lists all three monitors. Problem is there are two active displays I can select.

Mavec wrote:
I would like to add a third monitor.
The GPU(s) in your T400 (and most other laptop brands) will support two different displays concurrently. If you want to support more than two different displays concurrently, you will need another GPU external to the T400.
Generally, if you want to use two external displays on a T400 you will nee dto use a docking station.
I have read messages on various fora on this topic and know that there are a number of ways of doing this, but as I have never had a need to do this myself I can't tell you how to go about it.
Cheers,
Bill
I don't work for Lenovo

How do you connect two Apple ID's?

How do you connect two Apple ID's to one another?

Yes. You can sync multipl iDevices on the same computer using the same Apple ID. You can each have different configurations of apps, books, music, etc. or have identical configurations. In this way, however, your common data - contacts, mail, calendar will be the same on both iDevices.
The Apple ID doesn't distinguish one phone from another, only how the phone will sync to a computer. The Apple ID is how iTunes knows to which computer a phone syncs. And, the Apple ID determines who is the registered owner of downloaded and purchased items via iTunes.

Can I connect two apple tv on same network and same apple ID at a time ?

Can I connect two apple tv on same network and same apple ID at a time ?

Welcome to the  Discussion Forums.
Yes you can do all that without needing to keep plugging things in and out. You will still need to manually turn on the receiver and turn down the volume from the tv though.

Can I connect two monitors to a Mac Mini?

Can I connect two Monitors to a mac mini

Yes, but how depends on what model of Mini and what kind of monitors. Early models only had one monitor port. Later models had a Mini-DVI port and a Mini-Displayport. Current models have a Mini-Displayport and a HDMI port. The Mini-DVI and Mini-Displayport can attach VGA or DVI monitors, whereas the HDMI port can't use VGA monitors.
Beyond that, you can get Matrox's DualHead2Go or a USB->VGA or USB->DVI adapter. The Matrox product is a bit expensive and the USB adapters are a bit to slow for games and such. So, again, the answer is "yes", but with limitations

How to connect two external monitors to a Mac Book Pro?

How to connect two external monitors to a Mac Book Pro?

Not as is, but Matrox makes a peripheral that enables connecting more than one external monitor - matrox.com.

How do I connect two monitors to my macbook pro?

How do I connect two monitors to my macbook pro? This question applies to both DVI and VGA, as I might have to work with multiple sets of monitors.

The MacBookPro only has enough horsepower in the video card for one external monitor.
If you want two or more, you need a MacPro.
Or a MacBook Pro and a Remote Desktop controlled MacMini.
http://www.apple.com/remotedesktop/

Connecting Two SLDs in r XI Landscape

Similar Messages

Maybe you are looking for