Connecting two WRV200's to share same wireless and wired network
I am looking at purchasing a second WRV200. I want to have both wired together on the same network along with having them include the wireless on both to the same network. i.e. having two wired locations and two wireless AP's to get on to the one network.
Is there a way to configure two WRV200's to do this?
Regards...
Yes. You can use the access point inside the WRV200 bypassing all the router functions. You configure the second WRV with a free LAN IP address inside your main LAN (e.g. 192.168.1.2 if 192.168.1.1 is your main router). You disable the DHCP server on the second WRV. Then you wire a numbered LAN port of the second WRV to your existing LAN. Do not use the internet port of the second WRV. Now you only use the wireless access point and the switch inside the WRV.
To create a single wireless roaming network you set up the wireless on both WRVs with identical wireless settings (SSID, wireless security, keys, etc.) The only difference should be in the allocation of channels. They should not use the same channel to avoid interference.
Message Edited by gv on 10-21-2009 07:40 PM
Similar Messages
-
I have attempted to update my software over 10 times but I get a network connection error. Anyone with the same problem? Got it on the wireless and wired network.
Disable all Firewalls & Anti-Virus software...try again.
-
Bridging wireless and wired network interfaces
Hi,
Is it possible to "bridge" the airport and ethernet network interfaces on a macbook pro using Leopard (10.5.7) ? I do not mean Internet connection sharing. That results in NAT.
I recently got a desktop in my room which doesn't have a WiFi interface. I wish to connect its wired interfaced to my mbp's wired interface and give it access to the wireless network my mbp is on. To do this I would need to bridge the wireless and wired interfaces on my mbp. All the results I find online to do this only talk about Internet Connection Sharing ..
thanks,
regards,
PuneetYou can turn on IP Forwarding to achieve most of what you're after:
sudo sysctl -w net.inet.ip.forwarding=1
This will have the Mac forward packets from one interface to the other without NAT.
However you still need to use separate subnets, and may need to play with routing to get everyone to talk to each other. -
AirPort Express (2nd gen), share internet wireless and wired in the same time
If I use my AirPort Express (2nd gen) and I connect the modem in WAN port, and a switch in the LAN port (this swich connect a computer and a NAS wired), can I share the internet wireless and via LAN and the same time?, the wireless devices and the wired devices would be in the same network?.
Thanks.Thanks!
-
Wireless and Wired Network/Bonjour Printer Settings.
I am setting up a network for a preschool that has six Macs (MacBook, iMac Intel, Mac Mini Intel, eMac G4, iMac G5) on a network spread out around the school. Some teachers bring in their own laptops, but no frequently and most are Macs.
The network is currently arranged like this:
Office:
Bellsouth DSL Router with one RJ-45 ethernet wire running to the WAN port on an Apple AirPort Extreme (802.11g).
One RJ-45 ethernet wire runs from the Apple AirPort Extreme (802.11g) LAN port out of the office to a network switch in the Library.
All three Macs in the Office are currently connected wirelessly with Airport cards.
Library/Lounge:
One network switch with an RJ-45 ethernet wire from the Office running into it and two RJ-45 ethernet wires running out of it to:
One eMac connected via ethernet from the switch in the library.
One iMac G5 connected via ethernet from the switch to the Teacher's Lounge.
I am currently sharing one laser printer via Bonjour that is plugged directly into the Apple AirPort Extreme (802.11g) via USB in the office.
There is currently one inkjet in the Teacher's Lounge plugged directly into the iMac G5 and is being shared from that iMac.
Here is my question:
I would like to hardwire the iMac Intel and Mac Mini (office Macs) directly to the network to improve file transfer speed between the Accountant's Mini and the Office Manager's iMac Intel. I have two options, I could run a wire to a network switch from the Lan port from the Apple AirPort Extreme (802.11g) and then connect the two Office Macs and the two Library/Lounge Macs directly from there and I assume that all thusly connected Macs would have Bonjour access to the laser printer. However, I noticed a setting in the (round topped) Airport Extreme's setup utility that said something about "do you want to connect to Bonjour with a wired (whatever" I can't remember the wording exactly, but does a setting like this one need to be checked to share that printer both across the wireless network AND the wired computers as well?
I want to be able to share the laser across the network and the inkjet that is being shared from the G5 across the network and a future Office inkjet that, I assume, I will have to plug into one of the Office Macs to share. I can't put a USB hub on the AAEX to share via Bonjour, so my options seem to be limited. Any suggestions or workarounds for doing this better?
Do the new "N" Airports allow printers to be daisy-chained on a USB hub and shared via Bonjour?
BTW, I prefer Bonjour from the AAEX because the printer's available even when all other Macs are off or sleeping.
JoeLI guess we're discussing the same here
https://supportforums.cisco.com/message/4050376#4050376
~BR
Jatin Katyal
**Do rate helpful posts** -
ACS 5.4 with DACL over wireless and wired network
Hi my name is Ivan, I have a question
I have a deployment in my network wired at this way:
Profile 1: corporate's users are working with 802.1X to authenticate computers and users with eap peap mschap v2 and Mac Filtering configuring in the Cisco WLC. My ACS 5.4 is integrate to the Active Directory.
Profile 2: Telephonies IP authenticate with MAB. All the Mac Address are registered in to the ACS locally.
Profile 3: user guest authenticate with portal web from Cisco Wireless Lan Controller over the wired network, and the account exist in to the WLC Lobby Ambassador
A my deployment in the wireless network is in this way:
Flex Connect with central authentication and local switching to connect 15 sites over the wan network.
SSID 1: users corporate working with 802.1X to authenticate users with peap mschap v2 and Mac Filtering configuring in the Cisco WLC. My ACS 5.4 is integrate to Active Directory.
SSID 2: users guest working with portal web from Cisco Wireless Lan Controller over the wireless network, and the account exist in to the WLC Lobby Ambassador.
I would like to configure in the Cisco ACS 5.4 Downloadable Access List (DACL) to use in my network wired and wireless.
How can I do it to my scenary?
Please could you help me?
Regards
Ivan.Hello. To avoid confusion, let's divide the WLC based upon the operating system.
There are WLCs who run AirOS. That includes WLC 4400, but also includes WLC 5500.
There are WLCs who run IOS-XE. That includes the new Catalyst 3850-X and WLC 5700. (also I think can run AirOS too).
IOS-XE fully support DACL. On the other hand AirOS support DACL partially.
From ACS point of view, when you configure DACL for IOS you configure not only the name of the access-list, but also the access-list entries. That way the IOS devices don't need to have the ACLs pre-configured. This is great because you only need to create and update the access-list entries from only one place (which is ACS) and deploy easily to hundreds of switches.
On the other hand, when ACS configures DACL for AirOS it can only specify the name of the access-list. The AirOS device needs to configure the access-list with a name exactly as configured on the ACS. Sadly, each AirOS device also needs to configure all acess-list entries.
It seems you want to configure DACL along with other attributes. If you explain me a little more your requirement I can show you what to configure.
Best regards -
Connecting to wireless AND wired network at the same time.
I just bought 2 lacie 500 GB Network Hard Drives with Gigabit Ethernet. One for file storage, the other for a backup of the first drive.
My iMac connects to my DSL router using a Linksys wireless G Access Point, which is in another room in my apartment, due to the genius contractor installing only one telephone jack.
So can I use my iMac's ethernet port to connect to a gigabit switch, and then connect the 2 external HDD to the switch? I don't need the other computers on my network to have access to the external HHD, just my iMac. However I do need to be on the 'net and have access to the external HDDs at the same time.
ThanksNo problem at all, the Interface that connects to the Internet, needs to be drug to the top of Network>Show:>Network Port Configurations and checked ON.
So drag Airport to the top, Ethernet second and you should be good to go. -
Can't connect to D-Link router. Both Wireless and Wired connection.
Hi guys,
So I've had this problem for a really long time. I am unable to connect to my D-Link router. My laptop used to be able to connect to this router before. I was using my laptop then all of a sudden I was disconnected from the wifi connection.
I tried to connect back to it but it said that I needed to be in range. I'm tethering off my phone atm to write this post. I'm currently right beside the router but it still gives me the same message. Sometimes it'll just say that
windows cannot connect to the hidden network. I tried using an ethernet cable to directly connect via LAN, it worked for awhile, but recently now it says that I don't have a valid IP configuration. I've looked through many forums and threads and
tried their "fixes" but I guess it still wasn't my "fix". I have gone into CMD and did the ipconfig /all command and here are my details:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\apagtalunan>ipconfig
Windows IP Configuration
Wireless LAN adapter Wireless Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::4d38:b408:8509:4c3b%11
IPv4 Address. . . . . . . . . . . : 192.168.43.142
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.43.1
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Reusable Microsoft 6To4 Adapter:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 11:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 27:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter 6TO4 Adapter:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 12:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 13:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 14:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 15:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 16:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 17:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 18:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 19:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 21:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 22:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 20:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 23:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 24:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 26:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 25:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 28:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 30:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 39:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 29:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 31:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 33:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 34:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 36:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 37:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 35:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 38:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 40:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 45:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 43:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 50:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 52:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 53:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 56:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 58:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 57:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 70:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:6ab8:103c:2f0e:3f57:d471
Link-local IPv6 Address . . . . . : fe80::103c:2f0e:3f57:d471%79
Default Gateway . . . . . . . . . : ::
Tunnel adapter isatap.{68D1DDD2-DEE1-44CF-B523-24A567A2CF67}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
C:\Users\apagtalunan>
Not sure if this "Tunnel adapter" should even be there. Anyways, my laptop is a MSI-CR600. I've had it for awhile now, past warranty and whatnot. Never called and brought it back to the manufacturer. D-Link router is
DIR-825. And to narrow it down even more, I can connect to my friend's router, aslo at my church, and my girlfriend's place. If there is any other info needed to help solve this problem, just let me know. I'll do what I can. Thanks!
(Oh, and everything is up to date! Drivers, etc.)
-AlomarAutoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 18:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #10
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 19:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #11
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 21:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #13
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 22:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #14
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 20:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #12
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 23:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #15
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 24:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #16
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 26:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #18
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 25:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #17
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 28:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #20
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 30:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #22
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 39:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #30
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 29:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #21
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 31:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #23
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 33:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #24
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 34:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #25
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 36:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #27
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 37:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #28
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 35:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #26
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 38:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #29
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 40:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #31
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 45:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #33
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 43:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #32
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 50:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #35
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 52:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #36
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 53:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #37
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 56:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #38
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 58:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #40
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 57:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter #39
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 70:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{F464A3E5-95B3-4E00-8B1C-4FAD657B1EF9}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{68D1DDD2-DEE1-44CF-B523-24A567A2CF67}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{42861E73-8E24-482C-9E93-BE2B94966E48}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\Users\apagtalunan> -
Wireless and wired network set up?
Currently I have one iMac and two PCs connecting wirelessly to my Airport Extreme. One of the PCs found it without any issues...the other PC crashed and had to be rebuilt during the 3 days of trouble shooting. When it was rebuilt it to found the Airport without an issue. Never did figure out the issue and feel pretty lucky. Now here is my question...I have an older Gateway Desktop that was hard wired into the Airport, but it is in another room now and I want to connect it to the network for one of my younger children. It is nowhere near my base station or other computers or a cable outlet for DSL access. It also has no Wireless card...yes it is that old. Is there a way to use the Airport Express to wirelessly capture my signal, but then hard wire into the Ethernet port? If not this...than any other suggestions would be helpful. Thanks!
I would suggest a USB wireless network adaptor. It will probably cost around 20$.
-
I'm not terribly computer savvy. I have a few PC's here and a brand new iMac. My current network is wired and what I want to do is put in a new network that will work with both pc and my iMac and will be wired for the PC's and wireless for the iMac.
What do I buy, whats the best, fastest and very important, the easiest?
SusanHi susan-kelly
I have been a fan of AirPort Base Stations for quite some time. They are quite easy to set up.
This link may be helpful as far as the basics go: Creating a small Ethernet network
This link is more specific to getting the PC's and Macs to actually talk to one another and is a little more technical: Networking with a Windows PC
Luck-
-DaddyPaycheck -
Connecting Two WRV200s Wirelessly?
Due to layout of the house and lack of wire access, need to connect two WRV200's wirelessly. One will be connected to my cable modem and the other will need to provide additional coverage but act as an access point to the net. Can someone tell me how I go about doing this?
Not at all. The WRV200 requires a wired internet connection. To extend wireless coverage you need a repeater. With second WRV200 you have to connect them with a cable to make some use of them. If it is not possible to get a cable connection inside the house consider going outside of the house. Maybe that works better...
-
Connect two internet lines on the same cisco router 3945 series
i have two internet lines from the same provider and i have one router i want to connect the two lines in the same router
any ideas !!!!!!!!!!!!!Hi,
No problem, similar treatment. Follow
1. Create IP SLA/Track for both internet link
2. Break your LAN subnet into 2 smaller subnet
3. Create route map, Match with 1 subnet & route the traffic towards 1st internet link
route-map General_Internet_Traffic permit 10
match ip address 115
set ip next-hop verify-availability 10.1.1.1 track 1
set ip next-hop verify-availability 11.1.1.1 track 2
4. Create route map, Match with 2 subnet & route the traffic towards 2nd internet link
5. Configure NATing/PATing over the interface, selecting by route-map
ip nat inside source route-map General_Internet_Traffic interface FastEthernet0/0 overload
- Ashok -
What happen when we connect Two PC with IP from Same subnets
Scenario 2nd : What happen when we connect Two PC with IP from Same subnets. PC1 -192.168.10.1/24 PC2 - 192.168.10.2 on a two different L2 Switch on different vlans which are connected via a LAN cable.
All ports are access ports
Interview Question : No More Info.
Pc1<SwA>------<SwB>PC2
Q.1 Will they communicate If yes what will be packet/frame flow.
Q.2 If not where will be the packet/frame drop. ? Why.
I need step by step if possible plz how the packet moves , vlan taggings n all internal works that happens behind .. plz
thnx in advnce ....Hi Abhishesk,
The PCs should communicate each othet.
Since there is no trunk port involved, there is not tagging involved.
Since both the PCs are into the same subnet. PC1 will not need default gateway for the communication with PC2. So PC1 will start with sending ARP request for PC2 MAC address.
Since all the ports in SW1 are in same VLAN, the ARP should reach all ports including the switchport where SW2 is connected to.
Sw2 has got a complete different access port on ALL the switchports. Sw2 will receive the ARP from Sw1. Remember that there is no tagging for the frame. Hence Sw2 will again send the ARP packet to all the ports which belong to same VLAN wherein the packet is received. ie, Sw2 will send the ARP packet to all the ports in Sw2. PC2 will also get the the ARP.
The ARP reply will make it way back using the same logic.
Now both the PCs can start the actual packet exchange. -
Since upgrading, both our wireless printers are still visible, but OSX will not connect with them. Both work via connecting from other sources via the same wireless router (airport). What do I need to do to get my printing/scanning working again?
First thing to try is reset Printing System:
OS X Mavericks: Reset the printing system
Next would be reset the router (power off 15 secs then back on). And, 2 minutes later, reset the printers 1 by 1. -
Can an airport express support wireless and wired connection at the same time
im wondering if i can use wireless and wired connection at the same time
The Ethernet port that the old AirPort Express has got is to connect the AirPort Express to your modem, not to connect another PC or Mac, so you can only connect wireless devices to the AirPort Express.
If you have the new AirPort Express, you can connect a wired PC or Mac and more wireless devices or computers at the same tiem
Maybe you are looking for
-
Can we show the root qualification group in tx PPPM & Matchup
We have a requirement to show the root qualification group in PPPM and once the match up is done to also show the root object and not the direct parent qualification group. Is it possible to add another column in tx PPPM or to modify the content in a
-
Unable to transfer purchased applications from Iphone 3gs to Computer
As my computer crashed some time ago, I reinstalled the operating system and hence all my applications have disappeared from my itunes. I have already authorised my computer again but when my iphone 3gs is plugged in, I will receive a prompt saying t
-
hi there - after finally managing to update my software last night - it seems now a new set of issues has cropped up on this nightmare phone. Wondering whether anyone can help. I cant seem of access the network destinations. So the phone now only se
-
SAP Transction to see the Man Hours/ Order
Hi Experts, In process Order we had a standard Value Man Hours. Is there any Standard Transaction through which i can see the man hours per Order. Or Any body having any ides about the BADI. So through BADI I can fetch the field of man hours and see
-
Calling producer/consumer subvi using main vi for image grab acquire
Hi everyone, I am not sure if I get the producer/consumer concept wrong. I tried to write a producer/consumer subvi that simulate continuously grab acquire image. When I call the subvi from the main while loop with a main vi, it seems to run into a i