Connecting USB cable to new iPad
Is there a way of connecting a USB cable to my new iPad? I have a device that I want to connect to it but it is only supplied with a USB cable.
I don't find this question too clear, but I'll try to answer anyway.
" ... my new iPad?" I wonder if that means the latest model iPad, commonly called the iPad 4. If so, it has a lightning port on the bottom.
" ... but it is only supplied with a USB cable." What does "it" refer to ... is it the device you're trying to connect to, or is it the iPad?
Anyway, your iPad comes with a cable that goes from its bottom port (presumably the lightning port, but maybe a 30 pin port if you're really talking about an older model) to USB.
So the bottom line is you have a cable with your iPad that connects to USB. The cable came with your iPad.
Similar Messages
-
Wiped our old iPad 1 clean, now can't install iOS from iTunes using laptop PC (W Vista). iTunes does not "see" the device. Tried uninstalling and installing iTunes on laptop. Also bought new USB cable. The iPad is charging, but that's all it does. Just want to get it operating again for browsing and e-reading.
OK. You merely erased the content and settings. The IOS is still there.
If it has NEVER been jailbroke, here are some standard repair procedures. From what you've already stated, my guess is that you'll end up with Recovery Mode described in the last paragraph.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this. -
My Samsung TV has a USB port. When I connect the cable from the iPad to the TV I can only show Pictures and Music. Why does the videos not appear and how can I show videos on the TV.
This article should help you with that:
http://www.ehow.com/how_7211806_display-iphone-tv.html
Take care -
i cant connect my iphone to laptop. its nither charging nor connecting usb cable is okay .... can any one help ?? pls...
BOB we need you urgently
Perhaps Bob will see this thread, he is the professor in these cases.
You do not use a WEP password but wpa/wpa2 on router and equipment.
All equipment connects to WiFi, but for your iPad.
Even with all other equipment WiFi off, you cannot connect your iPad.
Your iPad connects to other WiFi nets correctly.
All resets etc done on iPad and Router.
Still I am not sure it is your router for sure, frustrating...
I want to test 2 other things:
1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect. -
Why am i seeing athe itunes logo and a usb cable on my ipad screen
why am i seeing the itunes logo and a usb cable on my ipad 2 screen
It means that you need to connect the iPad to your computer's iTunes (recovery mode), and you should then be able to reset the iPad and restore/resync your content to it
-
Nokia N8 - Connect USB cable to device
My new nokia N8 is constantly coming up with the message "connect usb cable to device".
I'll click ok and 2 minutes later it will reappear.
When i connect it to a usb, it disappears but will then reappear when i unplug. I've tried updating software but none is available, and there is no programs running on the phone.
When i turn off and on i still get the same problem.
Anyone know of a solution before i throw it against the wall?vvaino wrote:
Ok,
Have you tried the trick you can find from the phone's
manual; long press the on/off button (for 8-10 sec) until the
phone vibrates three times? With this, you don't lose any
of your information.
-vvaino
That's barely a trick
it just kills the power to the phone and is esentialy the same as using the on off switch
anyway as to the OP don't know
you could try resseting the device type *#7370# into the dialer,
this will restore the phone to an out of box stateand you will loose all of your settings
see if that helps -
Are the usb cables for the iPad 2 and iPhone 4s interchangeable?
Can I use my usb cable provided by my ipad 2 to connect my iPhone 4s to my iMac or vice versa. I noticed the usb cable for the iPad 2 is slightly thicker. Doesn't it mean it's better or faster in terms of transmission of data? Thank you.
Identical cables.
Stedman -
How do I get my old contacts that were last synced on my ITunes account through my laptop (USB) to my new iPad ? I no longer have a laptop just my iPad mini.
So the contacts were synced to the computer you no longer have? You could use a free app like MCBackup and email the contacts from the ipad to yourself and open the email on your phone and then import the contacts from the email to the phone
-
Kernel Panic when I connect USB cable to use Rane Serato SL3
Connect USB cable to use Rane Serato SL3 causes the following kernel panic. Used cable is an 5 meter USB-2 cable. This is 100% reproducable.
Yes yes I know Rane does not officially support Mavericks yet however if I use another (shorter) USB-2 cable with the Rane Serato SL3 it's no problem. I also have an older Rane Serato SL1 and this device works (USB-1) perfect with the same 5 meter USB-2 cable and the same short USB-2 cable.
I've taken the liberty to ask Rane what's going on and no succes there. They just don't seem to know.
So you smart people over here, what's going on?
Here is the Kernel Panic:
Anonymous UUID: 944C81E9-22DD-96FF-FD1A-553E9CAD6B34
Sat Nov 2 20:34:06 2013
panic(cpu 4 caller 0xffffff800b8dc19e): Kernel trap at 0xffffff7f8debe166, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000000e538000, CR4: 0x00000000000606e0
RAX: 0x00000000e0000200, RBX: 0xffffff8025405000, RCX: 0xffffff800bf024b0, RDX: 0xffffff802d0add08
RSP: 0xffffff80fcbc3d80, RBP: 0xffffff80fcbc3da0, RSI: 0x00000000000a0014, RDI: 0x0000000000000000
R8: 0x0000000000000051, R9: 0xffffff800be01910, R10: 0x00000000000003ff, R11: 0xffffffffffffffff
R12: 0xffffff801ecc1800, R13: 0xffffff802d0add00, R14: 0xffffff8025405000, R15: 0xffffff7f8debe200
RFL: 0x0000000000010246, RIP: 0xffffff7f8debe166, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x4
Backtrace (CPU 4), Frame : Return Address
0xffffff80fcbc3a10 : 0xffffff800b822f69
0xffffff80fcbc3a90 : 0xffffff800b8dc19e
0xffffff80fcbc3c60 : 0xffffff800b8f3606
0xffffff80fcbc3c80 : 0xffffff7f8debe166
0xffffff80fcbc3da0 : 0xffffff7f8debee0f
0xffffff80fcbc3dc0 : 0xffffff7f8c13aadc
0xffffff80fcbc3df0 : 0xffffff7f8debe2a9
0xffffff80fcbc3e00 : 0xffffff7f8c13aa20
0xffffff80fcbc3e30 : 0xffffff7f8c139634
0xffffff80fcbc3e60 : 0xffffff7f8debbaf4
0xffffff80fcbc3ea0 : 0xffffff800bcae4b3
0xffffff80fcbc3f00 : 0xffffff7f8debaa62
0xffffff80fcbc3f20 : 0xffffff800b84a15a
0xffffff80fcbc3fb0 : 0xffffff800b8d6aa7
Kernel Extensions in backtrace:
com.apple.iokit.IOAudioFamily(1.9.4f11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@0 xffffff7f8c135000->0xffffff7f8c163fff
dependency: com.apple.kext.OSvKernDSPLib(1.14)[744516ED-C05D-340F-9867-F5E89B2E8BE5]@0xffff ff7f8c124000
com.rane.driver.sl3.10.6(1.3.3f1)[46AEB5AC-AD52-3F5C-9927-59ABE444B435]@0xfffff f7f8deba000->0xffffff7f8dec5fff
dependency: com.apple.iokit.IOAudioFamily(1.9.4fc11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@ 0xffffff7f8c135000
dependency: com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f8c19a000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x000000000b600000
Kernel text base: 0xffffff800b800000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 431507508429846
last loaded kext at 426057833798866: com.sophos.kext.sav 8.0.14 (addr 0xffffff7f8dec6000, size 24576)
last unloaded kext at 426034845418472: com.sophos.kext.sav 8.0.14 (addr 0xffffff7f8dec6000, size 20480)
loaded kexts:
com.sophos.kext.sav 8.0.14
com.rane.driver.sl3.10.6 1.3.3f1
com.regularrateandrhythm.driver.RowmoteIREmu 1.0
com.eltima.ElmediaPlayer.kext 1.58
com.Cycling74.driver.Soundflower 1.6.6
com.serato.usb.kext 2.3.0
net.osculator.driver.OSCulatorIOKit 2.1
com.squirrels.airparrot.framebuffer 3
com.squirrels.driver.AirParrotSpeakers 1.7
at.obdev.nke.LittleSnitch 4050
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AGPM 100.14.11
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.kext.AMDFramebuffer 1.1.4
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleHWAccess 1
com.apple.AMDRadeonX3000 1.1.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.AppleIntelHD3000Graphics 8.1.8
com.apple.driver.AppleIntelSNBGraphicsFB 8.1.8
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.kext.AMD6000Controller 1.1.4
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleThunderboltIP 1.0.10
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleSDXC 1.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.kext.triggers 1.0
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAcceleratorFamily 98.7.1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.driver.AppleSMC 3.1.6d1
com.apple.kext.AMDSupport 1.1.4
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleThunderboltDPInAdapter 2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily 2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.0
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.driver.AppleThunderboltNHI 1.9.2
com.apple.iokit.IOThunderboltFamily 2.8.5
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1Most likely, one of these is the culprit.
com.sophos.kext.sav 8.0.14
com.rane.driver.sl3.10.6 1.3.3f1
com.regularrateandrhythm.driver.RowmoteIREmu 1.0
com.eltima.ElmediaPlayer.kext 1.58
com.Cycling74.driver.Soundflower 1.6.6
com.serato.usb.kext 2.3.0
net.osculator.driver.OSCulatorIOKit 2.1
com.squirrels.airparrot.framebuffer 3
com.squirrels.driver.AirParrotSpeakers 1.7
at.obdev.nke.LittleSnitch 4050
Boot into safe mode (restart holding down SHIFT key). If no KP, then disable these, reenable one at time to determine which. If KP, then most likely hardware related. Run the Apple Hardware Test suite, extended tests at least twice, followed by Rember. See
OS X About kernel panics,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics,
How to troubleshoot a kernel panic, and
Tutorial: Avoiding and eliminating Kernel panics for more details. -
IiPad is stuck in the iTunes connect screen. I have held the home button down while plugging the iPad in and still nothing. Hard reset isn't even doing anything. It's not even showing up under my computer. Please Help
Did you get a message that the iPad is disabled?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
HT4571 problem! connecting 3G network with new Ipad (verizon)
device: new Ipad verizon, 16gb
problem: I got the device from US and I never activate it's original Verizon sim card yet. I tried to use a 3G data sim card outside US.
the dvice get antenna and bring the carrier name on top corner also say 3G beside it.
but when I try to use safari for browsing the net, it says : " could not activate cellular data network"
how can i fix it?
my carrier says the sim card is activated and working (the 3G sim i mean not Verizon)
any suggestion?Why are you using Windows print sharing with your nice network printer? This mode only supports printing, not scannning or faxing. The better way to do this is to attach the printer to your router with Ethernet or wirelessly so that all PCs (regardless of how they connect) can use all of it's features. Disconnect the USB cable and run the Wireless Setup Wizard (if you want to connect it wirelessly, otherwise, plug the Ethernet cable in to the printer and router) from the front of the printer (Setup >Network menu), then run the HP software to "Add a Device" on each PC.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Why won't a apple usb cable charge my ipad?
So I left town for work and forgot my ipad charger. I've tried a generic once for ipods that didn't work and I also tried an offical apple usb cable direct to the computer and that didn't work. Anyone have any suggestions on why those don't work other than buying an ipad specific one?
The USB ports on most computers are too low power-out to charge the ipads with them powered up. They will slowly charge the ipad with the ipad sleeping.
It will say "not charging" when awake, but it may very slowly charge.
The ipad supplied charger is 10 watts (5 Volts at 2 amps)
The iphone/ipod chargers are typically 5 watts (5 volts at 1 amp)
The typical computer's usb port is 2.5 watts (5 volts at 0.5 amps)
Note: Some of the newer mac's have a higher powered usb port and will give a good charge indication on the ipad.
Hope this helps... -
Red light after connecting usb cable each time
My ipod shuffle (4th gen) is weird and would not start. I know it's because someday I plugged out the usb cable right after I perform the sync task and forget to press the reject button first.
Now the symtons is: It won't start / recharge, and it even doesn't show any light. Each time I connect it to the PC or AC adaptor, it will show RED light in about 5 seconds, and after few seconds there will be no light and it just dies.
How can I fixed my poor faily new shuffle?Hey exkaede,
Welcome to Apple Support Communities! I'd go ahead and try restoring your iPod shuffle to factory settings, so the software will be restored to its original factory condition with updates:
Restoring iPod shuffle to factory settings
http://support.apple.com/kb/HT1481
If your computer doesn't recognize the iPod and it isn't appearing in iTunes, take a look at this document:
iPod shuffle not appearing in iTunes
http://www.apple.com/support/ipodshuffle/assistant/itunes/#section_0
Best,
David -
So my ipod touch won't charge or sync if I use the old USB cable from previously bought iPods or chargers. Is this a problem with my iPod or are the new iPods not compatible with the older USB cables and chargers?
My first iPod was a b/w iPod 4G. I still use the Firewire cable with AC adapter for charging my new iPod Touch. The USB cable is the same I used on that old iPod, that I use on the Touch. Unless you have cut the wire or have a broken port on either end of the wire, then the USB cable should work fine.
-
Connecting ipod classic to new iPad (4th generation)?
Which adapter connects older ipod classic to new iPad (4th generation)?
The "connection" for the iPod needs to go through iTunes on a computer. You cannot connect your iPod directly to an iPad.
So (for example), if your intent is to transfer songs from iPad to iPod, you need to use the copy of the songs that are on the computer and use iTunes to sync them to the iPod. If you can't do that because you bought the songs on the iPad from the iTunes Store, you can use the Purchased screen in iTunes (on the computer) to re-download them (at no cost) into your iTunes library. The link to Purchased is on the iTunes Store Home screen, to the right, under QUICK LINKS.
You can then sync those songs to the iPod.
Maybe you are looking for
-
Adobe connect add in not showing up in Privacy Settings Mac OS X Yosemite
When I try to share a screen, I am told to click the ENABLE button. I'm taken to System Preferences where I navigate to the Privacy Settings, Accessibility, and I'm instructed to enable adobeconnectaddin. The problem is, adobeconnectaddin is not sho
-
Why does a red line is appearing when generating a pdf file from illustrator?
I create my slide using illustrator (from CS2 to CS5) and when I save the file in pdf format, a red line is being created around the rectangle border of the silde. I don't know how it was generated and what to do to remove it. I need help please.
-
How much is it to get my 3g ipod charging piece fixed?
The charging piece on my ipod broke when I used a portable charger & then proceeded to fall out. What would be the best solution having a small budget?
-
Cannot install Office 2013: Microsoft Setup Bootstrapper has stopped working
I have been trying to install Office 2013 and get this error. Microsoft Setup Bootstrapper has stopped working. Full details are below. The version of office I am installing is en office professional plus 2013 with sp1 x86 and x64 The error log shows
-
Morning, I've installed lion on my laptop with just dongle problems at the moment. I've now downloaded it onto my iMac. However, I didn't have time to reboot and let the software finish installing onto my iMac. Where do I go to get the software to co