Connecting usb product to scsi port

hi folks. i have a Power Macintosh G3/233 Desktop. there are no usb ports and i'd like to hook up a scanner that has an older usb port (usb 1.1). is there any sort of adapter product out there that i can use?
seems as the scsi to usb adapters are more for connecting scsi external devices to a usb port, and not the other way around.
thank you

I installed this IOGEAR USB 2.0 PCI card in my beige G3s and B&W G3s several years ago. Whether the same controller chip (under the IOGEAR label) is being used, I don't know now. You didn't indicate which OS you're running. If it's OS 9.x, the USB card will function at the slower USB 1.1 speed. For USB 2.0 speed (40x faster), you must be running OS 10.2.8 or newer. I had Jaguar installed on one of my beige G3s, but can't remember if the card was recognized at the faster speed. Once the card is installed, you need to install the OS 9.x USB Support drivers (version 1.4.6 or newer) from the OS 9.x installer CD. This can be done with a custom install or with the use of TomeViewer, a downloadable utility that enables you to extract the USB drivers directly from the OS installer tome, for placement in the Extensions folder. The pre-OS X drivers are: HID Library, EnetShimLib, SerialShimLib, USB Device Extension, USB Software Locator, USB Support, and USB Mass Storage Support. As for the scanner, do you know if the manufacturer included Mac OS drivers? Also, do you have Mac-compatible scanner software to use with it?

Similar Messages

Connect USB device to Firewire port

Can I connect a keyboard, expansion CD, or other USB-cabled device to a Firewire port on the iMAC? What brand of USB-Female to Firewire-Male is recommended?

As mentioned, far to different ofvoltages & signals for it to work... thoigh I've seen suh impossible devices for sale out of China.
I think what you want is a good USB hub...
http://eshop.macsales.com/item/NewerTech/USB2HB7PRO/

What cord can I buy to hook up my SCSI port scanner to my MacBook USB port?

I have an older Microtek X6 EL scanner that I want to connect to my MacBook via a USB port. Right now all that is on the scanner is a SCSI port. I need to find a cord with a SCSI connector (it would be the male piece 25 pin) on one end and a USB 2.0 port on the other end. I tried Amazon and even ordered one that looked right. But it wasn't large enough to connect. Obviously I want one that is Mac compatible but I also run a virtual machine with Windows on my MacBook so I can live with a Windows version if I have to. Any help would be greatly appreciated.

Apple dropped the SCSI port for USB and FireWire in 1999.
did find this one on Amazon http://www.amazon.com/Cables-To-Go-22429-Adapter/dp/B000067RWK/ref=pd_sim_sbs_e_ 1 It's a 25 pin SCSI to USB, Windows only.
Here's a 25 pin female to 50 pin male SCSI adapter. http://www.amazon.com/QVS-HPCen50-MicroCen50-Female-Adapter/dp/B0044B6XJS/ref=sr _1_6?s=electronics&ie=UTF8&qid=1335833278&sr=1-6

Auto shut-down when connecting USB-units (on some units..)

Hi there.. i just bought this mainboard :
MSI K9N Platinum, nForce 570 Ultra, DDR2, Socket-AM2,2xGbLAN,Firew, ATX, PCI-Ex16
Version :
MS-7250
I have read the "shut down" issues from the sticky topics in this forum, and i want to know if this is the same issue...
Here we go :
I have approx 3-4 connected usb units which works perfectly well..
- My 3Com OfficeConnect Wireless USB Adapter
- My wireless keyboard
- A usb memory stick..
These work perfectly well..
I also have a Lacie USB 2.0 External Harddrive which works ok enough sometimes.. but it's kinda unstable..
What doesn't work at all.. is my Sony Ericsson W950i when i connect it to _any_ usb port on my computer..
What happens :
When i insert the usb-cable into the phone.. and win xp (pro sp2) detects the phone, it immidiately shuts down the pc.
Sometimes i have to unplug the power cable for about... 20 seconds to get it to boot again at all.. but most times it's enough to boot as normal.
Is there _anything_ i can do to fix this ? ... or.. do i have to get a replacement motherboard (newer version)..
PS !!!
*I also tried to flash tie bios (the windows way), but after pressing the "start" button for flashing.. nothing happens.. nothing at all.. Weird
Any ideas on this is rewarded with a digital beer
Best regards
Terje.-..-

I'll provide some more (a LOT) of information..
It's part of the report from Everest Ultimate Edition...
I have read thorugh all the posts regarding the USB-trouble (which you linked).. but it's not the same problem as i have (atleast it doesn't seem so..)
I didn't connect anything to the 10'th pin (USBOC)..
--> https://forum-en.msi.com/index.php?topic=57472.0
As you see from this log.. some usb-units are already listed there.. and a lot of other usb units works perfectly well..
It's just a external harddrive, and my phone (both USB connectors) which shuts down my pc...
USB SETUP
--> THE USB-CONTROLLER (PCI)
[ nVIDIA nForce 570 Ultra (MCP55U) - EHCI USB 2.0 Controller ]
Device Properties:
Device Description nVIDIA nForce 570 Ultra (MCP55U) - EHCI USB 2.0 Controller
Bus Type PCI
Bus / Device / Function 0 / 2 / 1
Device ID 10DE-036D
Subsystem ID 1462-7250
Device Class 0C03 (USB Controller)
Revision A2
Fast Back-to-Back Transactions Supported, Disabled
[ nVIDIA nForce 570 Ultra (MCP55U) - OHCI USB 1.1 Controller ]
Device Properties:
Device Description nVIDIA nForce 570 Ultra (MCP55U) - OHCI USB 1.1 Controller
Bus Type PCI
Bus / Device / Function 0 / 2 / 0
Device ID 10DE-036C
Subsystem ID 1462-7250
Device Class 0C03 (USB Controller)
Revision A1
Fast Back-to-Back Transactions Supported, Disabled
Device Features:
66 MHz Operation Supported
Bus Mastering Enabled
USB Devices:
A727 6893 3Com OfficeConnect Wireless 108Mbps 11g USB Adapter
0451 2036 Generic USB Hub
046D C50C USB Composite Device
046D ABD0 USB Human Interface Device
046D C50C USB Human Interface Device
046D C50C USB Human Interface Device
Universal Serial Bus controllers:
Generic USB Hub 5.1.2600.0
Standard Enhanced PCI to USB Host Controller 5.1.2600.0
Standard OpenHCD USB Host Controller 5.1.2600.2180
USB Composite Device 5.1.2600.0
USB Root Hub 5.1.2600.2180
USB Root Hub 5.1.2600.2180
[ Universal Serial Bus controllers / Generic USB Hub ]
Device Properties:
Driver Description Generic USB Hub
Driver Date 01.07.2001
Driver Version 5.1.2600.0
Driver Provider Microsoft
INF File usb.inf
Hardware ID USB\Vid_0451&Pid_2036&Rev_0101
Location Information General Purpose USB Hub
[ Universal Serial Bus controllers / Standard Enhanced PCI to USB Host Controller ]
Device Properties:
Driver Description Standard Enhanced PCI to USB Host Controller
Driver Date 01.06.2002
Driver Version 5.1.2600.0
Driver Provider Microsoft
INF File usbport.inf
Hardware ID PCI\VEN_10DE&DEV_036D&SUBSYS_72501462&REV_A2
Location Information PCI bus 0, device 2, function 1
PCI Device nVIDIA nForce 570 Ultra (MCP55U) - EHCI USB 2.0 Controller
[ Universal Serial Bus controllers / USB Root Hub ]
Device Properties:
Driver Description USB Root Hub
Driver Date 01.07.2001
Driver Version 5.1.2600.2180
Driver Provider Microsoft
INF File usbport.inf
Hardware ID USB\ROOT_HUB20&VID10DE&PID036D&REV00A2
[ Universal Serial Bus controllers / USB Root Hub ]
Device Properties:
Driver Description USB Root Hub
Driver Date 01.07.2001
Driver Version 5.1.2600.2180
Driver Provider Microsoft
INF File usbport.inf
Hardware ID USB\ROOT_HUB&VID10DE&PID036C&REV00A1
IRQ 20 Shared Standard Enhanced PCI to USB Host Controller
IRQ 22 Shared Standard OpenHCD USB Host Controller
THIS APPEARED UNDER SYSTEM DEVICES (so it have detected it..)
[ System devices / Sony Ericsson Cable Emulation Bus ]
Device Properties:
Driver Description Sony Ericsson Cable Emulation Bus
Driver Date 31.05.2006
Driver Version 4.38.6.212
Driver Provider Sony Ericsson Mobile Communications AB
INF File oem14.inf
Hardware ID {3a4687c6-2342-48fb-a5b3-632baa20734b}
CPU
CPU Properties:
CPU Type DualCore AMD Athlon 64 X2, 2400 MHz (12 x 200) 4600+
CPU Alias Windsor-512
CPU Stepping BH-F2
Instruction Set x86, x86-64, MMX, 3DNow!, SSE, SSE2, SSE3
Original Clock [ TRIAL VERSION ]
Min / Max CPU Multiplier 4x / 12x
L1 Code Cache 64 KB per core (Parity)
L1 Data Cache [ TRIAL VERSION ]
L2 Cache 512 KB per core (On-Die, ECC, Full-Speed)
Multi CPU:
Motherboard ID nVidia MCP55
CPU #0 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+, 2412 MHz
CPU #1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+, 2412 MHz
CPU Physical Info:
Package Type 940 Pin uOPGA
Package Size 4.00 cm x 4.00 cm
Transistors [ TRIAL VERSION ] million
Process Technology 90 nm, CMOS, Cu, SOI
Die Size [ TRIAL VERSION ] mm2
Core Voltage 1.100 - 1.400 V
I/O Voltage 1.2 V + 2.5 V
Motherboard
Motherboard Properties:
Motherboard ID 63-0100-000001-00101111-051806-OPTERON$1ADGH004_M2N PLATINUM A7250NMS V1.10 05/18/06
Motherboard Name MSI K9N Platinum (MS-7250)
Front Side Bus Properties:
Bus Type AMD Hammer
Real Clock 200 MHz
Effective Clock 200 MHz
HyperTransport Clock [ TRIAL VERSION ]
Memory Bus Properties:
Bus Type DDR2 SDRAM
Bus Width 64-bit
DRAM:FSB Ratio CPU/8
Real Clock 302 MHz (DDR)
Effective Clock 603 MHz
Bandwidth [ TRIAL VERSION ] MB/s
Motherboard Physical Info:
CPU Sockets/Slots 1 Socket AM2
Expansion Slots [ TRIAL VERSION ]
RAM Slots 4 DDR2 DIMM
Integrated Devices Audio, Dual Gigabit LAN, IEEE-1394
Form Factor ATX
Motherboard Size 240 mm x 300 mm
Motherboard Chipset nForce570Ultra
Extra Features [ TRIAL VERSION ]
Motherboard Manufacturer:
Company Name Micro-Star International
Product Information http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_list.php
BIOS Download http://www.msi.com.tw/program/support/bios/bos/spt_bos_list.php
Chipset
[ North Bridge: AMD Hammer DDR2 IMC ]
BIOS
BIOS Properties:
BIOS Type AMI
System BIOS Date 05/18/06
Video BIOS Date 10/24/06
BIOS Manufacturer:
Company Name American Megatrends Inc.
Product Information http://www.ami.com/amibios
BIOS Upgrades http://www.esupport.com/biosagent/index.cfm?refererid=40
OTHER
Display adapters:
NVIDIA GeForce 8800 GTS 6.14.10.9744
SCSI and RAID controllers:
HPT302 UDMA/ATA133 Controller 1.22.0.0
VAXSCSI Controller 5.1.2600.2180
Universal Serial Bus controllers:
Generic USB Hub 5.1.2600.0
Standard Enhanced PCI to USB Host Controller 5.1.2600.0
Standard OpenHCD USB Host Controller 5.1.2600.2180
USB Composite Device 5.1.2600.0
USB Root Hub 5.1.2600.2180
USB Root Hub 5.1.2600.2180

Megaplayer 515 shows as USB PRODUCT

Hi all,
Hope somebody can help me out here...
I've the Megaplayer 515 and it worked just fine for about a year. I just wanted to download some music to it and I noticed that Windows XP doesn't recognize it anymore. In Device Manager, it shows up as <USB PRODUCT> under IDE/ATA/ATAPI-controllers. The device itself indicates to be connected. I tried the following:
1. Set USB legacy support to Enabled/disabled/Auto: no change;
2. Reflashed bios to 9.20 -> I was using a beta bios from MSI to test and thought that may do the trick - bad luck ... no change.
3. In Device Manager: enabled "Show hidden devices" and uninstalled the <USB PRODUCT>. Then restarted the system and plugged the MP in again. The Hardware Wizard showed up and I choose Auto everywhere. It starting installing the following device: %USB\GenericDeviceDes% and then asked me for the following disk "%DiskName%. It seems that Windows is looking for Stums.sys. However, when I point to the file, the hardware wizard says there was a problem installing the hardware.
4. Tried reinstalling all USB-devices: I uninstalled all USB drivers through Device manager and restarted the PC. No luck, still <USB PRODUCT>
I tried all USB ports and disconnected all other USB devices. I'm getting sick and tired of this ... Does anyone have another suggestion?
TNX!

Quote
let Windows re-Plug and Pray them
i used to say that when i tried to repair pooty old PCs for friends of mine...
BTW if the MP515 works fine in another computer, then at least the device isn't at fault then!

Connecting USB Hub doesn't connect some devices (randomly)

I have quite a few USB devices (normally 5: external Apple Modem, mouse, ext. Apple keyboard, 2 printers), which I plug into a USB 2 hub (externally powered D-Link DUB-H7). When I bring my MBP back to my desk, I plug the hub into one of the ports on my MBP.
In theory, this should connect all of my devices. In practice, it connects only some of them, and which ones it connects seems to be completely random. Sometimes just two, sometimes all of them. Sometimes the keyboard and not the mouse, sometimes vice-versa, and sometimes neither (both plug directly into the hub - I'm not using the keyboard hub).
If I unplug and re-plug the main cable - I get another set of devices. If I unplug the cable to an unrecognized device and re-plug, it is then recognized.
As you might imagine, this is a PITA.
I have tried:
- running USB Prober, including logging. This confirms that the non-working devices aren't recognized by the system at all, until I re-plug. The logging doesn't tell me anything that I can make use of.
- installed the debugging USB kext (http://developer.apple.com/hardwaredrivers/download/usbdebug.html). This makes the USB Prober log give more information, but still doesn't tell me anything that helps. If this causes writing to some other log, I can't find it.
- replaced the hub with an identical, brand new hub. No difference.
- replaced the main USB cable with another USB 2 certified cable. No difference.
Looked at the console and system logs. There are some USB-related errors, but nothing unusual happens at the point of connecting the hub. There are msgs from USB Prober, but I get these even when (successfully) unplugging and re-plugging a single device. E.g.
2007-09-20 22:54:41.651 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:41.652 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:50.975 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:50.975 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:51.412 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:51.412 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:51.934 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:51.934 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:52.467 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:52.467 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:52.954 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:52.954 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:53.254 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
2007-09-20 22:54:53.254 USB Prober[510] USB Prober: USBDeviceOpen() failed 0xe00002c5
So, any ideas on what this problem is, or how to track it down? The behavior is as if there are two many device-connection events happening in too short a time, and some of them are getting dropped. If so, could be an OS problem. But, that seems pretty basic.
I'd be glad to provide more detailed logs, if someone can specify what to log.

Hi all (esp. Carolyn). I bought a new hub (BelkinUSB 2.0 7-Port Economy Hub http://www.buy.com/prod/belkin-usb-2-0-7-port-economy-hub/q/loc/101/202378584.ht ml ), and my problems are gone.
I did more searching (I had done a lot already), and found a single comment on newegg by someone having similar and worse problems - same D-Link hub, and also on a Mac, though the 2 other Mac users had no complaints.
http://www.newegg.com/Product/ProductReview.aspx?Item=N82E16817111402&SortField= 0&SummaryType=0&Pagesize=100&SelectedRating=-1&=0&=100&Page=
Some other users of this hub had problems also, on PC's as well, though most had none.
Unfortunately, now I'm stuck w/2 junk hubs (warranty has expired). At least my problems are gone!
Message was edited by: ruftytufty

Installing laserjet cp 1525nw software "connect usb cable now" but nothing happens

My laserjet CP1525nw is connected by USB to my desktop PC and now I am trying to connect it to my laptop. I get to the point in the install process where it wants me to "connect the product" but when I connect the USB cord to the laptop nothing happens. My USB ports work fine for everything else and I have tried all three.

Hey there rcbrehm,
Sorry to hear you are having this problem. Here is a link to some troubleshooting that should help resolve your issue:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02124639&tmp_task=solveCategory&cc=us&dlc=en&la...
Make sure to let me know if you need further assistance after following the steps in the link above.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Unable to install software, it stopped almost at end and even didn´t asked for connecting USB.

product name: HP Photosmart all-in-one B010a
operation system: windows 7 64-bit
I was unable to install product, it didn´t asked me connect usb, and stopped almost at the end. I tried solve the problem with HP installation error - windows 7. I installed updates and so on, but in middle of new installing it wrote fatal error.

Hi b ,
Thanks for your response.
There were no accounts in my local security settings so I added SERVICE;Ron and it recognised them both .
To update , I decided to reboot and try the install one more time and Quicktime and itunes installed successfully , ipod appeared to but when I connect my nano I get an error message that the software didn't install correctly . I uninstalled it and reinstalled , ran ipod updater but it's still the same . When I plug in my nano itunes doesn't recognise it and I keep getting a message on my taskbar telling me that this device will run better in a USB 2.0 port but that's what I'm using !!?? . Any ideas ? .
T.I.A. Ron

Connected usb driver is not detected in window 8.1

hey .....
HP 250 G3 notebook
connected usb driver is not detected in window 8.1 after update BIOS software ....my current BIOS software version F.22 .... so plsss...fix this problem......

@jeet2113
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Connecting iPod mini through Firewire port

I usually connect my iPod through my USB 2.0 ports, but I would like to try connecting it through my firewire port. When I plug in my iPod with the included firewire cable, my computer doesnt recognized the mini is plugged in (the mini is charging so I know its connected). But it works when I use my USB cable.
Any help would be greatly appreciated. Thanks

Reset the iPod when it is connected to the computer. Several attempts may be necessary.

Connect USB Bluetooth transmitter to AirPort USB

Hello,
Have anyone tried to connect USB Bluetooth transmitter to the AirPort Express USB port in order to transmit the AirPlay music to external Bluetooth speakers? Will this work?
Thanks!

Won't work......since the USB port on the AirPort Express will only support a compatible printer.

Connect USB devices to iPad

Is it possible to connect USB devices, such as an Extn Harddrive, using an adapter or such?: Thanks, Greg

You can use the iPad Camera Connection Kit to connect a camera or sdcard, but connecting a hard drive is not supported at the moment. You can take a look at the Seagate Satellite hard dirve you can connect via Wi-Fi
http://www.seagate.com/www/en-us/products/external/external-hard-drive/goflex-sa tellite/?cmpid=ppc-_-satellite-_-g-_-us-_-seagate_satellite-_-e&gclid=CNjaltnkxK 0CFRRZhwodUB5NAw

Crash WinXP on connect USB-mouse

Help me please. I have update my winxp on thruth windows update - and download A-FOUR tech mouse driver(i have this mouse). Windows notice me that this driver is not microsoft certified, but i click yes. Now i have problem - when i connect mouse to usb port system is crash. What may i do?

Hi
In my opinion if its a USB mouse its not necessary to install the mouse driver because the OS recognized automatically the USB device. I recommend to remove the mouse driver. After rebooting the OS you can try to connect the mouse again to port.
Bye

Connecting USB and Charger at the same time

Hello guys, Is there any problem connecting usb and charger at the same time? after that, the Nokia Battery Monitor 2.0 shows 93% after full charge. Any ideia?

yes, there is a male-female usb extension cable sold on computer store.
Just pick up the length you need.
But the price is almost the same with the cheapest 2.0 usb hub (4 port), so you better consider the usb hub one.
Good Luck.

How to share an airport connected USB Disk over internet

Hi all,
I'm trying to get my AEBS connected USB Disk to be accessible over the internet, so I can access it when I'm not at home.
In Airport Utility I checked both 'Share Disks over WAN' and 'Share Disks over the internet using Bonjour'.
I've also set a few accounts who can connect to it (instead of being guests).
But what's next?
I can connect to the disk in Finder by selecting the menu-option 'Connect to server' and typing in 'afp://ip-address' (where IP-address is for the AEBS) as long as I'm in my home network, but I tried the same at my work but that doesn't work.
Do I have to configure the AEBS in some other way to make this possible?
Any help, advice would be appreciated.

Using the AirPort Utility, you will need to both enable File Sharing and configure the AirPort for Port Mapping. (Note: It is assumed that your 802.11n AirPort Extreme Base Station (AEBSn) is the only Internet router in your current network configuration. That is, it is connected directly to a broadband Internet modem, and not another router upstream of it.)
The following are the basic steps to configure an AirPort Disk to be accessed from the Internet:
Start the AirPort Utility > Select the AEBSn, and then, note the IP address shown.
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Disks, and then, select File Sharing.
Verify that both the "Enable file sharing" and "Share disks over WAN" options are enabled.
Verify that Secure Shared Disks = With a disk password. (Recommended)
Verify that AirPort Disks Guest Access = Not allowed. (Recommended)
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, select the "Personal File Sharing" option. (Note: This option would only allow Mac clients to access the AirPort Disks. If you want both Macs and PCs to connect, you would need to leave this field at its default value and enter the appropriate SMB ports to the mix of ports to be opened.)
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your AEBSn that you wrote down in step 1. In the Private UDP Port(s) and Private TCP Port(s) boxes, type 548. Click Continue.
In the Description box, type a descriptive name like "AirPort Disk File Sharing," and then, click Done.
Click on Update.
To connect to the shared AirPort Disk from a remote location using a Mac:
From the Finder > Go > Connect to Server.
Enter the DynDNS-provided Domain Name or Pubic (WAN-side) IP address of the AEBSn, followed by a colon and the Public port number that you choose in step 11 of the previous procedure. For example: afp://www.mydyndnsdomain.com:8888 or afp://123.456.789.123:8888
Click Connect.
You should be prompted for your user name and password. The user name can be anything you like; the password should be the Disk password for the AEBSn that you created in step 6 previously.
Click Connect.

Connecting usb product to scsi port

Similar Messages

Maybe you are looking for