Connecting via WIFI using SKY Broadband (UK) - Netgear router

Hi all, I've tried suggestions on this forum, so apologies if its been answered before, but I'm still having problems.
The IPod touch is recognised by my router, however, when I load my router password onto the IPod, it doesn't recongise it. Any advice would be really appreciated.
Thanks in anticipation.

I was having the same problem connecting to my dads SKY wireless router.
It took me while to figure out that I was not turning on the 'caps lock' button on the ipod touch keyboard. The Sky password (on the sticker under the router) had to entered in upper case.
hope that helps
Phil

Similar Messages

Connecting via airport to Sky broadband

Has anybody had any problems connecting to Sky broadband via their built in airport?
When I try to connect my iMac I am unable to do so unless I use a cable direct into the router. The message that I recieve is cannot find PPPoE host.
I have tried contacting Sky and they can only tell me that there is a problem with my mac which I know their isn't.
I would be very grateful if anybody can help

yes - i have the exact same problem - have been plugged in directly for 2 years now - cannot do wireless. I am moving soon - hope I can get router next to Mac lol

Airport Extreme connected via wifi -- will remote MobileMe still work?

I have two Macs: a desktop and a laptop. I have the latest software and I have MobileMe. My internet is physically connected to the desktop computer. The laptop is connected via wifi using a non-Apple router.
According to Apple's website concerning the AirPort Extreme, "Say you’re traveling and you need a file on the hard drive connected to your AirPort Extreme back at home. If you’re a MobileMe member using Mac OS X Leopard or Snow Leopard, no problem. You can access all the files on your shared drive over the Internet."
My question is this: if I attach an Airport Extreme to the laptop -- which is connected via wifi to the network -- will I still be able to access the attached hard drive via MobileMe while traveling, or does this work only if the Airport Extreme is directly wired to the internet?
Thanks.

Thanks, very helpful.
Say it loud, this is one of the best things of Airport, you control the volume even with the optical output:
¿However, why I can´t do the same with the optical output of my 2008 Mac Mini?
Each one (Mac mini 2008 and Airport Express 2008) have optical link to both receivers (Denon AVR3805 and Denon AVR1905).
But I must control the volume of the mac mini with the remote of the AVR3805.
It seems Airplay makes some magic, but straight driver of OSX over audio device don´t.
What a PIA (Pain in the ***). They can put Gigabits of audio information in the optical link but they can´t add a layer adding a header of some bytes to the packets, adressed to a smart DAC than can control the analog output with two bytes of information.
IEEE, ¿Will you make a layer specification for smart DACs? Life and devices use would be much simpler.
Apple in the meantime makes the magic he is able with Airplay.
Some day.

Can I share my internet connection via wifi AND use my wireless printer at the same time?

Not completely familiar with wifi capabilities. I have this new setup in my office. I want to share my iMac internet connection via wifi so I can text and check emails using my iPhone (no cell service inside the building). Which works fine. However, I now cannot print wirelessly to my HP printer (LaserJet Pro 400 color). Once Internet sharing is off, I can print just fine. Any other wireless options, or just go get a long USB cable?

Hi,
It is not a multitasking printer, other devices may keep it therefore the best option in this case: connect it to your wireless router and all devices which are conntected to this router can sahre the printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

TS4209 When i wake up my iMac from sleep my wifi is disconnected. It also disconnects my iPad, my wives iPad, my iPhone & Sky On Demand which is connected via wifi. To reconnect all devices i have to switch off & then on again wifi on the iMac. Can anyon

When i wake up my iMac from sleep my wifi is disconnected. It also disconnects my iPad, my wives iPad, my iPhone & Sky On Demand which is connected via wifi. To reconnect all devices i have to switch off & then on again wifi on the iMac. Can anyone help?

Had the same issue and finally solved it. After the upgrade to Mavericks our 2 new Macbook Airs stopped connecting automatically to Wifi while the older machines the kids had still worked fine.
Bought a new airport extreme and problem solved. Our Airport Extreme was about 5 years old and was probably not compatible with the new OSX.
BTW this was after trying everything people suggested on this forum and a 4 hour marathon tech support call with Apple where we reinstalled the OSX.
***** to need to spend $200 but glad the problem got solved.
New extreme is also mega fast so its all good.

Can not find air printer - using epson wf 3520 connected via wifi

Hardware: macbook air
Software: Osx 10.9.5
Epson printer wf3520 connected via wifi is working - latest printer software installed
-when trying to add an air printer sometimes its showing up under bonjour - usually its not showing as available printer
-when it is installed and I try to print I get the message "printer not connected"
Any help how to install it correctly?

Hi wolfgangfromhildesheim,
If you've gone through the article that Allen provided, have gotten through to the step where you reset your printing system, and the issue persists, then the next step in the article is for you to contact the printer manufacturer for further assistance.
If you're unable to print
Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
Make sure your printer has paper, and enough ink or toner installed.
Make sure your printer is connected to the same Wi-Fi network as your iOS device.
Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
About AirPrint - Apple Support
Take care,
Alex H.

Email application on N810 wontg connect via wifi

i have a nokia N810 internet tablet and since changing my broadband to talktalk, my email application wont connect.
my N810 will connect via wifi to my router but when i click the send\receive button on the email application, nothing happens. it does work if i connect via bluetooth and use the internet connection on my phone. it also worked fine on wifi before i switched to talktalk. this leads me to believe there is a seting somewhere on my router config that is blocking my N810's email appliction.
does anyone know what the problem could be?
thanks in advane.

Hello,
Im having this issue aswell. All the applications are working fine when connected to packetdata but not the wifi network. I tried hard reseting the phone twice allready but nothing helps. Please fix this asap.

I'm able to connect via wifi but not via ethernet

I have a iMac, Mac OS X v10.7.5, and recently had a problem connecting to internet. I can connect via wifi, but when I try connecting via ethernet it's not working. When I go to the preferences > network, it shows "green" / connected for ethernet but when I open up Safari or Firefox, it doesn't show a connection to the internet.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Hi, this has worked for a few...
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
10.5/10.6 instructions, System Preferences>choose interface>Advanced>Proxies Tab, make sure none are set, like for HTTP & HTTPS.

I have an Apple AirPort Extreme Base Station (Simultanious Dual_Band) (MC340LL/A), and updated the software. After updating no devices can connect via wifi. Any suggestions.

I have an Appl,e AirPort Extreme Base Station (Simultaneous Dual_Band( MC340LL/A. After updating the software, no devices can connect via wifi.

As suggested in another discussion area, (AirPort), I reset the AEBS to factory defaults. On the TV, I went to >Settings>General>Network>Configure Wireless>Wireless Networks. I could then see the generic "Apple Network xxxxx" on the TV. From my MacBookPro, I verified that I could connect to the TV by launching iTunes and noting that the TV was now visible in the "Devices" menu. Went back to the AEBS and ran through the "Setup" routine. I did NOT use the "Previous Settings" but instead, saved the old settings profile, created a new wireless network and new settings profile and enabled WPA2 Personal encryption. I then went back to the TV and went through the "Settings" routine again (as noted above). This time, after entering my WPA2 password, the TV connected to the network and problem was solved. Thanks.

Anone connecting via wifi?

Greetings!
I've been having troubles downloading HD movie files with iTunes 9.0.2. An other content downloads fine after purchase. Problems come when trying to download any file larger than 2 gig or so.
An Apple expert tells me that the problem is that the PC running iTunes is connected via wifi. Unfortunately, moving the machine or router is not a simple option.
So wondering if anyone out there is downloading HD content via wifi and having any issues, or doing fine?
BTW, I use AppleTV to watch the content from the PC, a connection made via the wifi router without issue.
Thanks!

Works fine for me. I'm using an 8-yr-old Linksys router on 802.11b, set to a channel that doesn't interfere so much with the neighbors.
If this is a new router, check to see if the manufacturer has any firmware updates.

I cannot connect on WiFi using my Airport Express even though the light is green

Why can't I connect via WiFi even though my Airport Express shows a green light?

Hi Jose,
Thanks for visiting Apple Support Communities.
If you can't connect to your wireless network, trying these steps first can help to isolate the issue:
Check your range to the Wi-Fi router and reduce the effect of interference.If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router...
See the full article for more troubleshooting steps:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
If you're using an iOS device, see this article as well:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Best,
Jeremy

Blackberry 9300 not connecting via wifi

I have a blackberry curve 9300 and when I turn off the data and connect via wifi, there is no data access at all. However when I was traveling and I had data roaming off, in had internet access. But then I had the data turned on, but data roaming off. The problem is when I turn data off. It doesn't work on wifi alone. Is this normal? Is there a setting I need to change?

Hello Mira_ishak
As I told to Turn Off your Mobile Network , but on a BlackBerry 6 and 7 if on Manage Connection we Turn On our Mobile Network as well as WiFi then by default our Browser will always choose wifi as prefered connection , User just turn it off to be sure that they are not using there Carrier Data, To use BBM we need an SIM card which has an active BIS connection even to use it over an wifi Network .
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Wake Sleeping iMac connected via Wifi

I just got an Airport Express for use on my home network with my iMac.
My main motivations for purchasing this is to use the Apple Remote function on my iPhone to stream music from my iMac via Airplay.
This is working great except I cannot connect when when my iMac goes to sleep.
Under the Energy System Preferences I have "Wake for network access" checked.
However If my iMac goes to sleep for an extended period it will not wake - If I go and jiggle the mouse i notice that it does needs to reconnect to the Airport.
Is there a setting on the iMac or Airpot that I'm missing?
I thought I saw somewhere that you cannot wake a Mac when connected via Wifi - only via Ethernet.
If this is the case i can just run a wire, but I would prefer to use a wireless connection.
I realize i can just use Airplay directly from my iPhone however there are items on my iMac not on my IPhone
Also I need to wake my iMac for remote access.
Thanks
Jeff
Message was edited by: OrboJeff

Under the Energy System Preferences I have "Wake for network access" checked.
This setting only applies to Ethernet connections, and requires a network device to send it a magic packet.
(57041)

I have a 2007 iMac connected via WiFi. It has been working fine until I turned it on after a recent vacation. Network preferences indicates that it is correctly connected to my WiFI system but the data input and output rate is virtually zero. I know that

I have a 2007 iMac connected via WiFi. It has been working fine until I turned it on after a recent vacation. Network Preferences indicates that it is correctly connected to my WiFI system but the data input and output rate is virtually zero. I know that the WiFI signal is reaching the iMac since both my iPhone and iPad are working perfectly at that location. I have rebooted the router and the iMac to no avail. Any suggestions would be greatly appreciated. Thank you very much. Geoff

Hi Geoff,
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

TS1368 Just changed modems, can connect via wifi with my phone to surf net, but can no longer connect to apple ap store?

Just changed modems, can connect via wifi to surf the net, but can't connect via wifi to update aps in iTunes store

OK thanks, I thought that maybe some of the iphone 3s were not able to connect to Wifi,

Connecting via WIFI using SKY Broadband (UK) - Netgear router

Similar Messages

Maybe you are looking for