Connecting Web and the entire OTC cycle
Is it possible to connect all of the SAP OTC (order-to-cash) transactions to a website? I mean you will transact via website and that website will pass the data to SAP and SAP will pass back the data needed by the website in real-time? The company plans to use a tablet as front-end and we have a software (a sales automation software) that we want to pass data to SAP and vice versa. Our company is about to acquire SAP ECC 6.0 without CRM.
1. Is this possible using IDOC?
2. Can the website and SAP pass data (back-and-forth) to each other in real-time?
3. Can it complete the entire OTC transactions (SO, DO, DR, billing)?
4. Any suggestion?
Please help. Thank you.
Hi,
Yes this is very much possible and probably a very common scenario..
These are the following possibilities:
1) The web based application should be able to call and be built to accept calls from APIs..which are called BAPIs.
We had a MTO based industry and we used BAPIs to enable functionality on the web..also check the part on synchronous calls.
2) I've worked in a business , where orders used to be taken on PDAs/hand-held devices.. all these devices are connected to a common database and SAP interfaces all the master data and transaction data to this database and the DB connects kind of real time to the PDAs / hand held devices. However, you've to check about what all transaction data are you expecting and if IDocs are available for all of transactions you're looking for..
I hope this helps.
Regards,
Raghu.
Similar Messages
-
Connecting Web and the entire OTC cycle (Part 2)
I am a .Net programmer and at the same time SAP SD Consultant but just new to this SAP field. I will be creating a website where the customer orders will be recorded. Based on my research in this forum, connecting a website and SAP will be possible (as advised by the people here - [source|Connecting Web and the entire OTC cycle;).
Here is my question. If I will create a website that will take control of the entire Order-To-Cash cycle, will I have problem connecting my website to SAP (back and forth), or it will be the problem of the ABAP person?
I do not have the slightest idea on how to connect to SAP if the front-end is a browser/website. I only know how to program using Microsoft ASP.Net
Please help. Thanks.Hi,
The problem really depends on where the connection is failing..
pls check the following and I hope that really helps:
[http://help.sap.com/saphelp_NW04/helpdata/en/51/d5470940fd564b888f4beb9523fa6c/content.htm]
[https://media.sdn.sap.com/html/submitted_docs/dotnet/Programming%20with%20PDK%20for%20.NET/Connecting%20to%20SAP%20NetWeaver%20Systems/Using%20SAP%20.NET%20Connector.htm]
Regards
Raghu. -
Client closed connection before receiving the entire response
Hi I am using URLFilePromise to download a zip file from my server to desktop using an air app. The zip file is about 200MB, but after it reaches downloading about 7 MB , urlFilePromise is dispatching complete event. I could see the following error message in charles debugging proxy saying "Client closed connection before receiving the entire response". I have tried the same download url in the browser and it works fine. Please suggest me, What causes this issue??, how to resolve this??
I am using http protocol to download this file.Even i tried setting URLRequestDefaults.idleTimeout property, but didn't help.
-
Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!
... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that. -
I've never dropped my phone for the 7 months that I've had it but last night I was at a park and when I sat down at a table, my phone as in my pocket and I heard a pop. I took my phone out and the entire screen was cracked. what should I do?
Probably not, since user-caused damage isn't covered by the warranty. But you can take the iPhone to an Apple Store and see if there's anything they can do for you. A phone company store will not service your iPhone at all, to the best of my knowledge.
Regards. -
ipod restore failed can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this
To get iTunes to see your iPod try:
- Placing the iPod in recovery mode. See:
iPhone and iPod touch: Unable to update or restore
- Placing it in recovery DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Sometimes this program will get th iPod in recovery mode:
RecBoot iPod-1.0.2-Mac-Jaxov.zip - File Shared from Box.net - Free Online File Storage -
My issue is that I'm trying to connect a PC to my wireless network run off of a Time capsule/airport router. My macbook pro connects fine but the network password is hidden and set to autoconnect. I thought I wrote the password down but when I try to connect the PC laptop and type in the timecapsule network PW is doesn't work. Trying to verify if the passwird I wrote down is correct but there doesn't seem to be a way to recover this.
Does anyone out there in the community know how to do this? (or do I just have to do a reset on the time capsuleReset the TC.
-
I paid for this service to fix my glass on my phone and now the entire LCD display is not working and after my repair the home button stopped working and I went back and they told me it was like that before the repair which it wasn't and they are telling me I need to pay 300 plus for a replacement phone that's refurbished now I don't understand apples support is suppose to be the best in the business and I have been more then ripped of the service I got damaged my phone more than it was before I would like to know where I can go to talk to someone who will help me not tell me it's my fault this is outrageous!!!
Take the issue up with whomever replaced the device, whether that is Apple or another company.
There is nothing that we, your fellow users, in these user to user support forums can do for you. -
I have an external hard drive that I used with my mini mac. I want to use it on my MacBookPro. I plugged it in found it on my computer, it flashes seemed okay until it tipped over and came unplugged to the computer. I set it back up turned it on and the grren light sometimes flashes. I read an article that said I needed to format the drive, I followed instructions and did that. I will download tomorrow my pictures.
Question
How do I know if this is working
does it record everything on your computer?
How do I see what is there? on the drive
confused please direct me to help
thanks
kathyit may be very basic but I still don't get it, the instructions are basic too so I'm sure I'm missing some thing here.i don't know how to copy data and copy it back
I don't see any indicaters to do so. I'll try again, , it's on a laptop and I don't want it connected all the time, just to secure some images.
how do i copyu...
maybe I'll try a 'zip' drive instead?? But I don't understand them either, hard to be a dunce.
and by the way, my computer has been freezing up on me lately had to turn it off and on, what have i done to it!!
I just connected it again and it shows as a number22but nothing happens when I click on it...shouldn't something happen here? It seems to be empty as well as it should since I followed instructions on formatting. so what now?
This is trying your patience I'm sure,you may just forget about helping me I just don't have a clue
but if you can help, I am listening. -
Well I believe I described the problem above. I want only to add that the external hard drive is a Seagate FreeAgent GoFlex Drive 1TB and the wireless modem router is a Belkin N Plus (model F5D8635-4 v1). Also, in the finder window under "shared" I see a "belkinserver" and when I click it, it says "connection failed". If I click "connect as" I get the "the server "belkinserver" is available on your computer..." which I mentioned above. I tried to connect macbook via ethernet to the modem router and then when I typed "smb://belkinserver" it immediately prompted me for a username and a password and when I typed them finally I got to enter the contents of the hard drive! So what's the problem wirelessly?
If your external drive does not have an independent power supply, you may wish to consider a couple of lower-cost options before tossing the drive. Bus-powered drives have no external power source and must get all their power from the computer. They can exceed the computer's USB energy budget.
Cheapest option:
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
This gets power from two of the computers USB porst sna can provide enough power to wake up an under-performaing bus-powered drive.
If you don't have enough ports to use this, try the next cheapest option:
Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC
Such a hub has a an independent power supply to make up for wahat the comptuer fails to provide. -
I think it's a Lion problem. I had this problem with an old Dell True Mobile wireless router, and hoped it would go away with a new Airport Express router. Same problem. I checked online and saw a lot of message boards featuring questions from people that suffered the interruption of their wi-fi connection, some with Macbooks others with iMacs like me. The problem happens when I don't use the computer for a few minutes. It goes into the Idle mode, kind of like sleep. The connection is severed and the time clock upper right stops. It's weird. There was supposedly an Apple update that addressed this issue, so at the Genius bar two days ago I updated to 10.7.3, downloaded and installed the update. Didn't work. Is it Lion? Is it a wireless card issue? Very frustrating. I subitted a genius bar work authorization with another Apple Genius Bar support tech the next day. He ran some tests. Cryptically said he knew that Apple knew about this and was working on a solution but couldn't tell me what it was. Submitted my info and said I'd be contacted by an Apple tech within 48 hours and provided with a link to another download of another update that should "fix" the problem. I don't know what to do.
I FINALLY SOLVED THIS ISSUE!!!!
New routers have "mixed" modes for your network; this means that it will automatically choose the best option between wireless-B, wireless-G and wireless-N network modes. I used to experience this issue using the 2.4 GHz. mixed mode wireless network.
Thankfully, my router can create 2 networks: a 2.4 GHz. network and a 5 GHz. network.
When I randomly changed this value to "use only wireless-B and wireless-G" trying to fix an issue with a wi-fi expander, the iMac wi-fi issue dissapeared! I tried it with wireless-N only, but it didn't work.
So, finally, I have a 2.4 GHz network with only wireless-B and wireless-G modes which works PERFECT with the iMac, and a 5 GHz. network with a mixed* wireless mode for everything else mode.
*PD: by "mixed" mode it means that the router will automatically choose between B, G and N network modes as it fits better. -
running imovie on a powermac w 10.6.8. went through the tutorials. imported my clips, got the hang of basic editing, and created a project.
was pretty happy with it, but needed to shut down and come back to work on it later. when i did come back, the entire project was gone.
how do i get the program to save my work in progress, without finalizing it?
thanksSo, everything worked out just fine!
I have all my material in the ProRes Codec on a seperate drive now. The project itself was kept or rather duplicated, the bin structure etc stayed the same but is linking to the newly created files. The playback and workflow is fluent. I am happy!
Time info: For about 120 GB of material the codec change process took 25 hours.
Thanks for your help!
Best
*a -
Essentially what happens when I start up my browser is that the window pops up and while I go to click on the search bar, it fills in black. When I click on the searchbar, when the text in it is supposed to become highlighted, its a black bar over the text. When I go to hit the back button, the bar will completely strobe on and off. While of facebook, I try to click my scroll bar, but it doesn't register as being selected while I'm holding down the left mouse button. Finally, like stated in the question, when I'm on any site, any hyperlinks that I scroll over turned to blacked out blocks, as do pictures, and occassionally the entire window just blacks out.
Essentially what happens when I start up my browser is that the window pops up and while I go to click on the search bar, it fills in black. When I click on the searchbar, when the text in it is supposed to become highlighted, its a black bar over the text. When I go to hit the back button, the bar will completely strobe on and off. While of facebook, I try to click my scroll bar, but it doesn't register as being selected while I'm holding down the left mouse button. Finally, like stated in the question, when I'm on any site, any hyperlinks that I scroll over turned to blacked out blocks, as do pictures, and occassionally the entire window just blacks out.
-
i plugged in my itouch to the computer , and i said that there was a new software update ready . i let it update , the file claimed to be backing everything up . so i let it . a few minutes later my itouch shut down and it took atleast 20minutes to come back on . the entire thing was blank-- as if i'd just purchased it or something . all the while , my computer/itunes screen says that my ipod is being "restored" . i had atleast 1,000 plus songs and about twenty apps on it, as well as pictures . . . sorry if i`m rambling on , it`s just everything i had on my itouch was VERY important and i need to find a way to get them back ... soon .
can anyone help me ! ? i`m desperateYou can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
For other items you will have to get them from where you originally got them. The backup that iTunes makes does not include synced media like apps, music, synced photos.
iTunes: About iOS backups -
Have had an ipad mini for 6 months and it has been connecting perfectly to the home wifi but it has just stopped connecting this evening and all other devices seem to be OK.
Just got a new iphone today and wonder if that has had an effect but that is connecting OK as is my laptop.
Any help would be appreciatedProblem was fixed by rebooting the ipadmini using on/off switch on the side of the ipad
Got the advice from a related previous discussion
Maybe you are looking for
-
How do I update apps that we're originally downloaded w/ non-email Apple ID?
I have some apps on my iPhone thar I downloaded before an email address was required your Apple ID. Now that an email address is required I can't run updates on those apps from the app store because the apps still have my old username associated with
-
Update VBUP-FKSTA (billing relevancy) during creation of invoice
Hi, We pack items in a delivery. Due to this an extra item is added to the delivery with a ZPAC item category. This item category is set as billing relevancy. We have created a requirement in copy control that we only want these items in the intercom
-
File Adapter giving Translation error while reading & moving pdf files
Hello Gurus, I am on SOA 10.1.3.4 and using BPEL for the below procedure. The requirement I have is to move pdf files from one local directory to another as soon as the pdf files land in source directory. So I used a file adapter (FileAdapter_1) to p
-
IPhoto importing RAW, then converting to jpg--losing RAW file completely
Okay, I've read through some of the posts on similar issues, but I still have some questions. I've always used iPhoto to import my RAW files (since it supported it anyway) and never had problems. I bought a new G5 and it seems like this problem has s
-
i currently searching for a tool that can convert pdf to any format (office 08, iwork '09, pictures) anybody has any suggestion? a tool that do-it-all?