Connecting webcam hd-3310 to a smart tv

Is it possible to connect an HP Webcam HD-3310 to a Samsung Smart TV and get the camera to work off of the TV? I know this model of webcam is not supported on all TVs. Thanks,

Hi quetzalj, it depends on the TV if it support any external devices to be connected, the best way to see if it works is to try connect it to the TV
I'm an HP Employee
-Please mark Accept As Solution if it solves your problem
-Please click the Kudos Thumbs up if you would like to say thanks

Similar Messages

  • Recently I bought a mini DVI to HDMI converter  from eBay for my iMac 21.5 Mid 2011, but only later I realised that it does not have the mini DVI port in that. How can I connect my iMac to a LG smart TV through a HDMI cable?

    This is the picture of all the ports from my iMac
    This is the mini DVI to HDMI converter which I bought from ebay. And I have the HDMI cable to connect it to my TV
    Could anyone please suggest me a solution how I could connect my iMac to the LG smart TV? Also I need to know if this transmits the audio as well to the smart TV?
    Suggestions are welcomed. I really appreciate and thank you for your time

    I would suggest looking into a Thunderbolt to HDMI connector. In this case, you may be able to use the TV as an external monitor. For this option, please confirm through additional research. I have not tested it personally.
    You can also use an Apple TV, which connects with HDMI. In this case, you can use Airplay Mirroring. Not all Macs support Airplay Mirroring, so you need to check first. I have a Mid-2011 27" iMac, and it supports Airplay Mirroring. I don't use it often because my TV is in another room, but I just tried it and it worked. It had to change the screen resolution to work well, so I don't know if I would want to use it as my day to day monitor. http://support.apple.com/kb/ht5404

  • How to connect HP photosmart 3310 via wifi to mac os x 10.8

    How to connect HP Photosmart 3310 via wi fi to Mac OS X 10.8 computer
    This question was solved.
    View Solution.

    Printers do not have any routers built into them.  You buy a wireless router separately.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How can I connect my 2012 iMac to samsung smart tv

    Can someone tell me how to connect my 2012 imac to a samsung smart tv.  Do I use the thunderbolt slot and if so with what cable?  My tv has hdmi slots, usb slots, and component/av in.  Thank you for your help.  ANd please tell me the exact cable to buy.

    Hello PeeJayM,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    OS X Mountain Lion: Use a television as a display
    http://support.apple.com/kb/PH10671
    OS X Mountain Lion: Video ports
    http://support.apple.com/kb/PH10567?viewlocale=en_US
    Connect to a Thunderbolt device to a HDMI display using an adapter.
    Best of luck,
    Mario

  • Wirelessly connecting my macbook air to my smart tv (samsung)

    is it possible for me to browse the Internet using my MacBook Air/Airport Extreme and wirelessly connecting to my Samsung Smart TV?

    i use VUZE on my mac book air and my samsung smart tv connects to it to stream moives and pics. VUZE is torrent program

  • Connect Apple Time Capaule with Sony Smart TV

    Hello
    how can i connect time capsule from Sony Smart TV ? I would like to stream videos stored in Time capsule to Sony smart tv which are both connected on same wifi network. I would like to use my iPhone as controller and would like to stream video on Sony Smart TV from Apple time capsule. Please suggest me easy solution other than connecting apple tv. May be a third party iOS app.
    Thanks

    not sure how time capsule works but the Apple TV only connected to a shared itunes lib not to upnp
    if your time capsule works with upnp then an ios device with an upnp (app store are full of free such apps) with
    airplay mirror to an Apple TV would do it
    the fact that your tv is a smart tv is irrelevant in terms of Apple TV it works 100% the same way on a cheap 30" non name tv with a hdmi port as the most einstein'ish tv around
    but if the tv has build in upnp client and the time capsule support upnp it would work out of the box without any apps or appletv's

  • Connecting X230 to Philips Miracast enabled Smart TV

    I have a new X230 which came with Intel WiDi installed.  I am trying to connect it to a Philips Smart TV which the folks at Philips tell me should work with WiDi.  The TV is Miracast enabled.
    When I run the Intel WiDi software, the Philips TV appears as an available device.
    When I click to connect, the software asks for a PIN number and at the same time a PIN number appears on the TV screen.  I enter this in the box provided by the software.
    There is a pause of 15 - 45 seconds, and then there is a message on the TV : "Step 2/2.  Connected.  Starting playback."
    This is quickly replaced by a message on the TV "Failed to playback".
    The WiDi software remains at the "Connecting..." screen.
    I feel I am pretty close to getting this to work, but not sure what to do to actually succeed. 
    I have already updated the WiDi software and drivers to the latest available on the Lenovo site:
    Intel WiDi - 4.2.19.0
    Intel HD Graphics driver - 9.18.10.3359
    Intel PROSet/Wireless software 16.1.3
    Any thoughts or suggestions would be very welcome.
    Wayward
    X230 (2325-77G) running Windows 7 Pro 64 bit.
    Solved!
    Go to Solution.

    Following my last post, I went out and bought a Netgear Push2TV which provides Miracast connection to a TV via a small external unit box.  With this I was able to establish a WiDi connection from my X230, albeit after a little messing about.  When the connection was first made, the TV screen remained blank.  I had to right click on the desktop and select Graphics Options > Output To > Clone Displays > Built in display and WiDi.  The display then appeared on the TV.
    Since then, Phillips have released a firmware upgrade for the Phillips 32PFL4258M/08 TV I have, and the X230 WiDi now works directly with the TV's Miracast facility.  My Kindle Fire HDX also now works with the TV's Miracast, albeit the reproduction is not great. 
    The resolution with the Phillips TV's Miracast is, for reasons only known to Phillips, limited to 720p albeit the TV itself is full HD.  The 720p is notably less sharp than the Netgear Push2TV's 1020p, so I shall continue to use the Netgear Push2TV, which works extremely well.
    I hope this helps someone.

  • Flash Player 11.7.700.169 crashing when trying to connect Webcam in Adobe Connect 11.2 r261

    Hello,
    I hope someone can help me. I discovered this week that I cannot connect my webcam to Adobe Connect anymore. The latter will stop working. If I uninstall Adobe Connect add-in I have the same problem but this time only the flash player crashes.
    I tried Firefox 20.1 (latest release), have all the updates  on the Windows 7 Professional (x64), the latest Flash (as you see), the latest Adobe Connect Add-In and the Website runs Adobe Connect 9 as far as I know.
    The webcam is working with other software (like skype or on Silverlight). Windows claims that the drivers für the webcam are up-to-date.
    I tried to roll back changes on the computer (DELL Latitude E6410 if this is of relevance), installed an older version of Flash etc. etc. No change in the behaviour....
    I found some discussions where an xsplit(something) was the problem. I have no xsplit installted.
    There logs were asked for. Where do I find these?
    I really hope that someone can help me since I need to work with this machine and with the AConnect in several projects. Webcam would really be a treat!
    Best,
    Konwill

    Hello Chris and Sameer,
    thank you for getting back on this issue.
    To answer your questions first:
    - no, I have not posted this issue in the connect forums - I will do and point to this discussion
    - Sameer, I have tested the webcam on the website you pointed out, it is not working with Firefox but it is working in Chrome
    I also need to give you an update on the current versions I use:
    Win 7 Pro (64bit) (all updates included)
    Firefox 21.0
    IE 10.0.9200.16576
    Chrome  26.0.1410.64 m
    Flash Player 11.7.700.202
    Adobe Connect Addin 11.2 r261
    I tested the webcam via FP with Firefox, IE and Chrome in the versions mentioned above. Only in Chrome I can run the WebCam on the www.testwebcam.com website. Once I start the adobe connect meeting and want to start the webcam the Connect Addin stops working with the popup as shown in post 3 of this discussion in all three browsers.
    All components have been uninstalled and installed again (except for IE)  for testing with no change in the result. I have also rolled back the computer to the system recovery point furthest back in time to see if any other installation might be the cause. But no luck either.
    I am happy to post the logs but would need advise where to find these or how to retrieve.
    Thanks!
    Konwill

  • [solved] Connect webcam stv680

    Hello
    I want to connect a webcam with the stv680 chip (DNT DXL-Cam) to my linux with usb but it disconnects itself.
    [raunz@fuckup ~]$ dmesg|tail
    stv680 [stv_init:382]
    STV(i): QVGA is supported
    stv680 [stv_init:398]
    STV(i): Camera has 0 pictures.
    stv680 [stv_init:382]
    STV(i): QVGA is supported
    stv680 [stv_init:398]
    STV(i): Camera has 0 pictures.
    stv680 [usb_stv680_remove_disconnected:1507]
    STV(i): STV0680 disconnected
    The /dev/video0 device is not created and I can't use it with cheese. The user is in groups camera and video.
    I already looked through the Wiki for webcams (http://wiki.archlinux.org/index.php/Webcam#stv680).
    What can I do?
    Last edited by raunz (2010-08-09 16:10:49)

    Updated my kernel to 2.6.35 doesn't make a difference.
    everything.log says
    Aug 9 16:27:36 fuckup kernel: usb 7-2: new full speed USB device using uhci_hcd and address 3
    Aug 9 16:27:36 fuckup kernel: WARNING! power/level is deprecated; use power/control instead
    Aug 9 16:27:36 fuckup kernel: Linux video capture interface: v2.00
    Aug 9 16:27:36 fuckup kernel: stv680 [stv680_probe:1429]
    Aug 9 16:27:36 fuckup kernel: STV(i): STV0680 camera found.
    Aug 9 16:27:36 fuckup kernel: stv680 [stv680_probe:1470]
    Aug 9 16:27:36 fuckup kernel: STV(i): registered new video device: video0
    Aug 9 16:27:36 fuckup kernel: usbcore: registered new interface driver stv680
    Aug 9 16:27:36 fuckup kernel: stv680 [usb_stv680_init:1551]
    Aug 9 16:27:36 fuckup kernel: STV(i): usb camera driver version v0.25 registering
    Aug 9 16:27:36 fuckup kernel: stv680: v0.25:STV0680 USB Camera Driver
    Aug 9 16:27:36 fuckup kernel: gspca: main v2.9.0 registered
    Aug 9 16:27:36 fuckup kernel: usbcore: registered new interface driver stv0680
    Aug 9 16:27:36 fuckup kernel: stv0680: registered
    Aug 9 16:27:36 fuckup kernel: stv680 [stv_init:382]
    Aug 9 16:27:36 fuckup kernel: STV(i): QVGA is supported
    Aug 9 16:27:36 fuckup kernel: stv680 [stv_init:398]
    Aug 9 16:27:37 fuckup kernel: STV(i): Camera has 0 pictures.
    Aug 9 16:27:37 fuckup kernel: stv680 [stv_init:382]
    Aug 9 16:27:37 fuckup kernel: STV(i): QVGA is supported
    Aug 9 16:27:37 fuckup kernel: stv680 [stv_init:398]
    Aug 9 16:27:37 fuckup kernel: STV(i): Camera has 0 pictures.
    Aug 9 16:27:37 fuckup kernel: stv680 [usb_stv680_remove_disconnected:1507]
    Please give me some suggestions!

  • Connecting my MBP to my non smart TV

    I want to connect my MacBook Pro to my 50" Panasonic plasma TV to get Netflix content onto my big screen. The TV is older, so not WiFi, but it does have a HDMI port on the front. Can I connect a Thunderbolt to HDMI cable from the MBP to the TV and have the TV as a second monitor? If so, will the MBP automatically connect to the TV when hooked up, or are there any steps to take to make this work? I don't want to buy the cable if this isn't going to work. Thanks.

    I suggest a cable such as this which eliminates the adapter:
    http://www.monoprice.com/Product?seq=1&format=2&p_id=6008&CAWELAID=1329452153&ca targetid=320013720000011105&cadevice=c&cagpspn=pla&gclid=COHU9sff57sCFaHm7AodQ2I ADg
    It should work but DO read the instructions that came with your TV.
    Ciao.

  • How to connect webcam with forms11g

    Hi All,
    Any one can tell how i can connect my laptop webcom through forms11g and take a snapshot save to our data base.
    With Regards
    Ramit Bajpai

    You will need to create your own java bean or obtain one from a third party. There are a few available by third parties, but are not free. Some general java bean examples and a reference to a third party can be found on this page:
    http://forms.pjc.bean.over-blog.com/article-image-capture-storage-retrieval-manipulation-and-management-40653479.html

  • Connecting apple mac book air to smart tv

    currently linked via adaptor and hdmi to LG tv... but not tranferring picture to tv screen.. a kind of denim screen is appearing...
    any advice out there.... ?

    OS X: Connecting a Wi-Fi printer to your Wi-Fi network

  • Connecting IPhone 6 plus to the smart tv

    Is there an app alternative to the HDMI cable for IPhone 6 plus. I know there is the Apple 30 Pin AV adapter, which is not available in the stores I have been to in Jeddah, if there is an app which does the same job, it wou

    The iPhone 6 Plus would not be able to use the 30 Pin Av Adapter, it requires the Lightning Av Adapter.  The 30 Pin is an old adapter for older devices. You may have more luck if you look for this one that would fit your iPhone 6.
    http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
    Outside of that, any App, would be dependent on the model of Tv you have.  Some TV manufacturers make Apps specifically for their smart TVs.
    Samsung does have its Smart View App: https://itunes.apple.com/us/app/samsung-smart-view-2.0/id858283863?mt=8 for example.
    Other Tv makers may have their own.
    Your other Option is to buy an Apple Tv.

  • How do i get iMovie to recognize my USB connected webcam?

    I upgraded to imovie 10.0.1 and it will not recognize my usb web cam. It finds the iSight camera just fine and the computer recognizes the webcam in other programs. Is there any fix for this or did I upgrade in error?

    Hi Kevin,
    Welcome to Apple Discussions.
    This forum is for discussions about the new format Discussions recently introduced.
    You will probably get a better answer to your question in one of the two forums (iMovie HD and iMovie 4 and previous) here:
    http://discussions.apple.com/category.jspa?categoryID=141
    Regards,
    Colin R.

  • Adobe Connect Webcam "Zooming" issue on PC NOT on MAC  HELP??

    Hi All,
    So this is about the resolution of the webcam and it "auto" zooming when the webcam window is reduced.
    ie.. I have a 480p camera and when the video window is large (approx a quarter of screen real-estate) all is fine.  As i reduce the window or ad more cams from other presenters the image is cropped to just the centre 280p . rather than just reducing the window size it reduces the images size as well.   So a head shot turns into an extreme close up!
    This issue does not happen on a mac.
    Both are using the adobeconnectaddin  and are up to date with flash etc.
    Any ideas?

    Have you ever received any information to help in regard to this problem?  I'm looking for similar "fixes" for LiveCycle Designer forms to work on a Mac.
    Since Firefox is now a Mac browser would your idea of coding work in that?  If so I'd love to learn how!
    Thanks,
    Kara Zirkle
    IT Accessibility Coordinator
    George Mason University
    703-993-9815
    [email protected]

Maybe you are looking for