Connecting Wii to C2D iMac?

hi there,
hey can this be done because I read elgato have a product tha can do this but only on some games.
help would be appreciated.

If it can output to a standard def TV through the standard red/white audio and yellow video cables (RCA), products that are designed to capture such analog video should work.
I have this one (XLR8 XtraView USB).
http://www.daystartechnology.com/videocapture/index.html
I don't use it with a Wii, but I use it to connect a VCR to an Intel iMac.

Similar Messages

Possible solution for white C2D iMacs with screen artifacts or lines

I have a white 20" Core 2 Duo iMac with the famous screen artifacts issues. Screen tearing, horizontal lines, goofy pixels, you name it. From my research it seems there are countless others with these problems.
I tried running the SMC fan control app to boost fan speeds. This helped a little, but did not completely solve the issue. A lot of people think these issues are related to heat, and I agree, but only partially. When a graphics chip overheats it is eventually damaged. I have damaged my share of graphics chips while overclocking them in my PCs. In the case of my iMac and maybe plenty of others, I still have issues if the GPU is hot or cold.
I installed WinXP using bootcamp. I finally found an application which will change the clock speed of the GPU on the fly. The X1600 GPU in my iMac has a 475Mhz core speed and 500Mhz memory speed. I cut these down to 400Mhz on the core and 400Mhz on the memory. At these lower speeds I no longer have any issues with screen tearing, horizontal lines, or random crashing. I do still have a few wierd pixels here and there, but they are not all that noticeable and I can live with them.
Now for the fun part. I wanted to permanently fix these speeds into my GPU so when I boot back to Mac OS X, I don't have any issues, and I no longer have to boost fan speeds or run any additional apps. I spent most of today taking apart my iMac, putting DOS on a spare SATA hard drive, and running an external monitor while booting my iMac with the spare drive hanging out the side. All this so I can run ATIflash, and use it to dump an image of the GPU BIOS ROM file.
Well, I ended up finding out the ATI GPU has no ROM to flash. My best guess is open firmware or something like that passes this data on to the GPU when the system boots.
So, in my case slowing the GPU down significantly reduced my problems while running within windows. I am 100% confident slowing the GPU down will also improve issues within Mac OS X, but I have no way to pull this off.
If Apple reads this, or if anyone has any connections at Apple, can we please get an optional firmware update to reduce the speeds of the X1600 GPU? It won't fix all the iMacs with these issues, but it will fix quite a few, and for those out there who don't have any issues at all with their white C2D iMacs, lowering the GPU speeds will most likely prevent damage from inevitably occurring, keeping them a happy customer.
Now, some of you may not like the idea of a slower GPU, but if I have to pick between a slower GPU and an $800 logic board, I will take the slower GPU any day.

There is a little easier Way to Navigate in Doing an F.D.R. than that Method: I listed it here if you prefer going this Route..
2. Re: FACTORY RESET FOR RAZR AN RAZR MAXX

TS2756 How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )

How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
but not the usb iPhone i used to have.
And when i try to add a new one i dont get a USB option.
can some one help me please??
this is how it looks (after the bluetooth PAN i used to have USB iPhone option)

The question would be more appropriate in the Mac forums as it is not really related to the iPhone.

How to connect my iphone to imac on wifi

Hi
I want to connect my iphone to imac on wifi. Actually i want to use internet on my iphone. So how can i do this ?

If you have a wifi router you can set up/turn on the wifi... set the user name and password wifi in your router... open wifi in general settings on the iPhone... log into your router, user name and password. (If your don't know how to turn on the router wifi. Google the router make and model and you will find instructions on how to do this.)
If you don't have a wifi router and your Mac has wifi capabilities you can hookup to the internet over wifi from your Mac to your iPhone.
System Preferences on the Mac... Network... Wifi... Advanced tab... Hit the '+' to add a user name and password...
Make sure you use WPA2 Personal for Security... Hit ok... Turn on the wifi... Same as above with the iPhone, log into your wifi settings on the iPhone.
*Important point... Use WPA2 for the encryption/Security setting. If you use anything else for this setting, your wifi can be hacked.

What cable do I need to connect my 27 inch iMac to my Cinema Display

What cable do I need to connect my 27 inch iMac to my Cinema Display to have two displays?

It depends on what type(s) of video input you have on your TV. If you've an open HDMI port on your TV, you can use a Thunderbolt (Mini DisplayPort) to HDMI adapter and it will carry the sound also. See -> here.
Good luck,
Clinton

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme with updates thru Snow Leopard but now seems to only allow WEP encryption instead of WPA.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme network, run from a intel iMac with updates thru Mavericks but now seems to only allow WEP encryption instead of WPA and can't connect to Time Capsule. Airport Extreme Base was controllable from either computer up through Snow Leopard (I didn't do any of the Lion upgrades). Then when I upgraded to Mavericks I lost the ability to use Airport Utility with this hardware on the Sunflower but could still connect wirelessly to network without any problems. But now with the Time Capsule upgrade the Sunflower is blocked from network by a dialogue that requests ony WEP password, not WPA pwd used by Time Capsule. Neither can I use the old airport extreme base to extend the time capsule network since I can't input the correct password/encryption approach to join it. Is there a work around? Would a newer but old Airport Express be able to extend network to Sunflower? Or maybe a third party wireless (such as Netgear, Dlink, etc) that has browser type control rather than special utility?
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this--so is it true now that the only access control is via WPA2 pwd now (which appears to be the encryption pwd and not the time capsule pwd)?

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule?
I can’t claim to completely grasp the issue(s) you’re describing, but the underlying problem is presumably your iMac’s obsolete AirPort card. Whatever the case, an obvious (if not particularly helpful) answer to your stated question would be to connect your iMac with an ethernet cable, using powerline adapters as an alternative if you don’t want to have wire running all over the place.
My still fully functional clamshell iBook, with an original AirPort card, connects wirelessly to my 4th Generation TC network by means of a cheap 802.11b/g/n USB Wi-Fi adapter. This might be an option for you too.
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this
When you edit your TC's settings the access controls appear under the Network tab, don't they?

Old ipod nano - when i connect it to my imac - error message

I have an old iPod Nano - when i connect it to my iMac, I get an error message that says I can't have more than 5 computers authorized with my account - My account only shows 4, but that's really beside the point since this iMac is already authorized and I sync other devices from it. Any suggestions? It won't let me add any new content to this iPod.

See Recover your iTunes library from your iPod or iOS device.
tt2

Connecting Macbook to new iMac

I recently bought the 24 inch iMac because my Macbook (purchased April 2006) is slow, unresponsive and has a broken optical drive. I have all of my recent photographs on my Macbook and would like to transfer them to my new iMac using a brand new Firewire 800 9-6 pin cable. My macbook is in working condition and this should work.. however my Macbook in FW mode isn't showing up on my iMac! Help!

That should be working. Try restarting the iMac with the MacBook connected in target mode. Also, if you run Disk Utility, does the MacBook's drive appear in the sidebar?
If you have never used that new cable for anything else, it is possible the cable is bad. It is also possible one of the FireWire ports is faulty. Do you have any FireWire 400 device? If so, use that cable to connect it to the iMac's FireWire 800 port, as a test. That will test the iMac's port and the cable. Also try connecting it to the MacBook with a normal cable, to make sure that port is working.
You can also connect the two Macs using +File Sharing+ over the network. Using an Ethernet cable to directly connect the two Macs will be faster than using wireless (as long as you use a Cat-5e or better cable). Just turn on +File Sharing+ in System Preferences Sharing pane on the MacBook. On the iMac, the MacBook should appear in the sidebar of any Finder window. Select it and click on the +Connect As+ button over to the right. Provide a username and password for an user account (on the MacBook).

Problem with IPad , did an update as requested now it does nothing, but display a graphic that shows I should connect to ITunes . So I connect it to my IMac run ITunes nothing happens. Try restore pop up says not eligible for restore.

Wow what a pile of crap you must wade through to ask a question .
Ok so the problem is I did an update on my IPad and now it does nothing but show a graphic showing the power cable connecting to ITunes
So I connect iPad to my IMac and prompt iTunes nothing happens. So I try sinc nothing happens.
So I try restore and the popup says I am not eligible for restore.
What is going on with this stupid machine

Machines are incapable of being stupid. Not so of their operators.
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Frustration! I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen???

I live in Japan,
I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen??

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Iwant to connect my iphone to imac and to see the pictures, i want to connect my iphone to imac and to see the pictures

iwant to connect my iphone to imac and to see the pictures, i want to connect my iphone to imac and to see the pictures

it require iphoto and iphoto should auto start when the iphone is connected if it don't you should be able to manually start the app in programs

Connect mac mini to imac

Hi,
I was wondering if I can connect an old mac mini to an imac so I can use the mac mini as an aditional hard drive to store all my music and pictures.
If so, how do I do it?
Thanks in advance.
Oscar

Welcome to Apple Support Communities
If the Mac mini and iMac have got FireWire or Thunderbolt (probably, FireWire 800), just buy a FireWire cable and start the Mac mini holding the T key while your Mac is starting. Doing this, your Mac mini's hard drive will show up as an external drive in the iMac, so you can store data in it. You may want to format the hard drive first.
This isn't the best way. If you aren't going to use the Mac mini, you can take the hard disk out of it, buy an enclosure, install the hard drive in it and connect it to your iMac. Then, format the hard drive > http://pondini.org/OSX/DU1.html Finally, open Finder and you will see the hard drive in the Finder sidebar, under "Devices"

How connect External monitor to iMac?

How connect External monitor to iMac?

How to do that depends on the iMac variant you have. iMacs have been in continuous production since 1998 in four broad families that are not 100 percent alike in behavior.
Please look at the iMac images and descriptions in the links on this site:
http://www.everymac.com/systems/apple/imac/index-imac.html
and tell us what variant you believe you have.
iMacs from the first through third-generations (G3, G4, and G5 processors) that support an external monitor were not set up to do anything other than "mirroring"--you see on the external exactly what is on the built-in display.
Your description sounds like you have a newer iMac than this forum covers because, starting with the Intel iMacs in 2006, external monitors were allowed to do both mirroring and "extended desktop." The latter is what I believe you are seeing.
Try this first: press the F7 key. On many Macs capable fo using external monitors, this was a shortcut to toggle between mirrored and extended display. If your keyboard has an "fn" modifier key, you may need to press that to get the F7 key to work.
If you have an intel-powered iMac I can ask the Hosts to move you to that forum, which is much more active than this one which is for pre-2006 iMacs.

Can you connect Wii to Mac?

Can you connect Wii to Mac?

Welcome to Apple Support Communities
No. Nintendo does not support that option.

Connecting Wii to C2D iMac?

Similar Messages

Maybe you are looking for