Connecting wireless device-Mac Book to wireless router!!

Good evening!
I am trying to hook up my Mac Book to the Linksys Wireless router but I'm totally stuck!! Any suggestions???
Thanks!

i'm having the same issue. hope some1 has a fix for us.

Similar Messages

I have my HP OfficeJet Pro 8500 A connected to my Mac Book Pro on a Wireless network. It works and

I have my Hp Officejet Pro 8500 A connected to my MAc Book Pro which is running Lion OS on a wireless network. It works just fine and prints and everything. The problem is a "HP Utility" window that pops up on my screen and says it is "connecting to device" and lists my printer. It just runs and runs and the entire thing is gray - meaning I can't close it, cancel it, or anything. When you try to click on it, the arrow becomes the color wheel of death. It is driving me crazy. I have gone through settings, I have downloaded the latest drivers, I have looked in utilities, I have opened the printer folder and can't find where this thing is coming from or how to turn it off. Please help. And yes I have turned offf the computer and rebooted.

If you are using Snow Leopard or Lion and have HP software for pre-Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the HP software on your Mac before you upgraded - even if you did a standard uninstall of the old software or installed new software over the top of it) you must uninstall the software using the 'scrubber' option:
Go to Applications/Hewlett Packard/ click on HP Uninstaller
Click on Continue
Highlight your device on the left pane
Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall <<<< This IS the Scrubber Option, there is no button labeled "Scrubber"
There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
Click Continue and let it finish
Restart your Mac
Download and install this: http://support.apple.com/kb/DL907
Now reset the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
If you want more features, you can download and install the Full Featured software from the "Support & Drivers" button at the top of this page, otherwise, basic printing and scanning will work without it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?

I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?
The firewire port reads the dj software and I can hear music playing through the sound card when I plug my headphones into it but there is no signal to the hardware (my dj mixer).
I have reset the firewire by turning off my mac book pro for a few hours and can see the sound card device in the fire wire section after clicking on the apple icon on the top left corner of my mac.
My dj mixer works on another mac computer with the same soundcard and different firewire cable.
Hope someone can help
Thanks
Wayne

kmiddlet88,
yes, it could be due to nearly anything listed in your kernel extensions, startup items, launch daemons, launch agents, or user items above. Please check all of your installed third-party software to make sure that the versions which are installed on your MacBook Pro are compatible with Mavericks; uninstall every software package which isn’t Mavericks-compatible. After you’ve done that, boot into Safe mode, and see if you still get the beach ball of doom there. If it doesn’t appear there, restart normally and see if it appears then.

How can i connect my 2008 mac book pro to a tv?

how can i connect my 2008 mac book pro to a tv?

The Mini-DVI to DVI adapter is designed for the iMac (Intel Core Duo), MacBook, and 12-inch PowerBook G4 — allowing you to connect to an external DVI monitor. It can also be used in combination with the Apple DVI to ADC adapter to support older Apple flat panel Studio or Cinema Displays.

HT201177 Why won't my TV connect to my Mac Book Pro via HDMI thunderbolt after an upgrade to OS X Yosemite version 10.10.1?

Why won't my TV connect to my Mac Book Pro via HDMI thunderbolt after an upgrade to OS X Yosemite version 10.10.1?

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

The magic mouse still can't connect to my mac book

i change the new batteries with my magic mouse
it cannot connect to my mac book with lion
i can see the green light but only for few seconds
reboot no work
i have the pad& keyborad also, they all work, only the mouse

Sorry for not explaining myself better, I can easily connect to the windows machine from the Mac using the IP address. I can't connect to the Mac from the PC and I have tried using the IP address.

Do I need airport to connect my new Mac Book Pro to a wireless printer?

Do I need Airport to connect a wireless printer to my new Mac Book Pro?

No and you don't have to use the wireless card in your MBP either.
A wireless printer connects to your wireless router. Any other device (computer) that is connected to the router either by wire or wireless will be able to use the printer.

Having trouble connecting Wireless Router to Network

Hey everyone, I ordered two Encore ENHWI-2AN3 wireless routers and am having trouble configuring the one I want to use as the wireless access point (other one will be used as a repeater.)
I followed the advice here
http://forums.verizon.com/t5/FiOS-Internet/Wireless-Router-Doesn-t-Work-After-35ft/m-p/206716/highli...
I disabled DHCP, and set a new IP on the local network. I disabled WiFi on the verizon router as well. When I run an ethernet cable between the two using LAN ports, and try to use WiFi I get a signal, but it doesn't go load.
I'm assuming I need to tweak something in the "internet" section of the Encore router, the main options are Dynamic or Static IP, PPPoE, PPTP and L2TP.
To clarify, I am not looking to replace the Verizon router, only use the Encore router for Wifi

kimdpb wrote:
Wireless is working for all the other devices
Using a Cisco router with Network Magic Interface....it doesn't see the Mac Book but the Mac sees the network.
Can you see the network in the Mac's wireless network list?

Need help connecting wireless router to wired router

Our computers (1 desktop, 1 laptop,and our Xbox) are presently connected to a Dynex DX-E401 4-Port/Cable/DSL Router. We would like to keep this arrangement for the XBox & desktop for gaming purposes (general consensus seems to be a wired connection is faster than wireless). However, I would like to add a Linksys WRT54GL Ver 1.1 wireless router for another laptop to roam around the house. Can I just connect the Linksys wireless router into the Dynex wired router, or does everything now have to go through the wireless router first? To connect the wireless router, do I run the setup CD in the laptop that I want to primarily use the wireless router? I'm not the most savvy when it comes to this stuff, but can follow detailed directions. If there are any links/videos, etc. you can refer to me to that already addresses this issue, that would be great. I greatly appreciate any assistance you can provide.

You don't run the setup disk at all. Actually, you don't want a router you only want a wireless access point.
Wire a computer to the WRT. Open the web interface at http://192.168.1.1/ (default password is "admin").
On the main setup page, change the LAN IP address from 192.168.1.1 to a free IP address in your DSL router LAN. If the DSL router uses 192.168.1.1 as well, you may be able to set it to 192.168.1.2 unless the DHCP server on the DSL router uses 192.168.1.2.
On the same configuration page of the WRT disable the DHCP server.
Save settings.
Unplug the computer.
Wire one of the numbered LAN ports of the WRT to your DSL router.
That's it. Now you are able to do any further configuration through the web interface of the WRT at http://192.168.1.2/ (or whatever IP address you have set).
Don't forget to enable wireless security WPA2 Personal with AES and a strong passphrase and change the router password "admin" on the Administration/Management page.

Connecting iPhone to Mac Book

I was wondering if anyone knew how to connect my iPhone to my Mac Book without the use of a router, through WiFi. I want to be able to connect through WiFi but don't want to get a router and was just wondering if anyone knew what I was doing wrong or if I even can create a network on my MacBook and try connect to it through my iPhone as it always says "Unable to join network".
Any help is appreciated, thanks in advance!

it may works!!!!!!!
First update your itunes. exit itunes if open before it connects.
restart your Iphone,connect carefully..

Cannot connect synology via Mac book

Hi I am lost,
Since I had an IP conflict within my network, I cannot connect my synology DS212 NAS anymore to my mac book pro. The strange thing is that I have no issue with connecting with eacht other device to the nas like windows laptop Iphone Ipad. I think there is still something wrong with IP addresses but when I run the synology assistant to find the NAS, the ip address is located but get's the message the connection failed
Would be great if somebody has some tips or tricks.
Thanks Jack

Hi, both protocols are supported, get still an error with the following message " there is a problem with connecting to serve 192.168.0.193" the server does not excist or is not accessable. Check the servername or the ip address fromthe server, check network connection and try again. In my opinion network is ok because otherwise i could not connect also via another device. thks

Why won't my iPhone 4 connect with my Mac Book Pro?

My Mac Book can see my iPhone, but cannot connect to it. Also, my bluebud x Jaybirds work fine with my iPhone 4, but are not seen by my Mac Book.

Well snozdop as you can see, I am new around here. In most online forums you can "bump" an old thread and get new responses, rather than making a whole new thread about the same question.
So I was hoping by pointing out the fact that Panicazi (who seems to have to deleted his profile, maybe because of people like you) said that "This solved my question" when in fact it didn't, because you asked...
"For what purpose are you trying to connect the iPhone to the Mac via Bluetooth?"
and then said
"Apple have never said "why" their implementation of Bluetooth is the way it is.
However, there are over 20 different Bluetooth profiles - not every device supports, or needs to support every profile. Some Bluetooth profiles would be useless on some Bluetooth devices.
File transfers over Bluetooth are slow. For the multi-gigabytes media files an iPhone it would be impractical for file transfers. USB 2 is many times faster."
didn't answer why his "...Mac Book can see my iPhone, but cannot connect to it..." or the rest of his question; someone might respond with an answer, rather than a rude comment.
-TH
<Edited By Host>

Connection Iphone 4s Mac book Air

Hello!
Le wifii est cassé (grisé) sur mon iphone 4s
Savez vous comment je pourrai me connecter au wifii via mac book air? (cable/bluetooth/airport?)
Merci!!
alex

Pairing those devices is not supported except for tethering.
Barry

My iphone dosent support the connection with my mac book pro

I tryed to sync my iphone 4 with my mac book pro and it connects for a second and then my phone says it dosent support that device? Help?

Are you trying to connect with Bluetooth for syncing? That is not supported.

I need to connect my old Mac book pro to the new one to transfer files. The old one doesn't have Thunderbolt 2 and the new one doesn't have Firewire 800. Will the Thunderbolt to Firewire adapter or Firewire to Thunderbolt adapter work?

I want to transfer data from my old Mac book pro to my new one using migrate. The old computer doesn't have Thunderbolt 2 and the new one doesn't have Firewire 800. Does the Thunderbolt to Firewire or the Firewire to Thunderbolt adapter work to connect them and transfer data?
Thank you!

Yes, use a Firewire cable and the FW to Tbolt adaptor.

Connecting wireless device-Mac Book to wireless router!!

Similar Messages

Maybe you are looking for