Connecting wireless printer to my system. Want to connect my Ipad 2

Just bought a HP 3510 wireless printer for my Ipad. 2. Cannot figure out how to connect the printer to my wireless. I followed directions, but no luck. The Ipad says it's connected to the printer, but printer is not connecting to the wireless Internet. Can you help or where do I look for help ???

Your router will not support the method I was going to suggest.
Your only recourse is to find a friend with a laptop to come install your printer.  Download and install the latest software for your printer on their computer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • Wireless printer not responding, mac says no connection

    wireless printer has been working fine for months,, now mac says no connection,, wireless printer says it is all ok full signal,repeated diagnostics send me in circle
    unplugged all,, rebooted all, still  mac says printer not connected

    If you have the printers IP address open Terminal (applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
    Network Printer Troubleshooting
    Try resetting the printing system.
    Reset Printing System
    WiFi Printer to WiFi Network - Connect

  • HT4356 I am trying to connect my printer, canon MG3170, it has been connected to the same WIFI network, but I still showing "no airprint printers found". I have tried to restart the printer few times but still the same. Please help, thanks (Dhoni-Singapor

    I am trying to connect my printer, canon MG3170, it has been connected to the same WIFI network, but I still showing "no airprint printers found". I have tried to restart the printer few times but still the same. Please help, thanks (Dhoni-Singapore)

    power everything off printer & router.
    re-boot ipad.
    Press and hold the Sleep/Wake
    button until a red slider appears, then drag the slider. Then press and hold the Sleep/Wake
    button until the Apple logo appears.  page 128 iPad user manual.
    more details on re-booting:
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Reboot-Your-iPad-Power-Off.htm
    power on router then printer then ipad
    Cross your fingers.
    Robert

  • Wireless printing from windows XP on HP1025 connected to time capsule

    I have a new BUSINESS DEL laptop that I want to print from on my HOME Apple network.
    My printer, HP1025nw, is directly network connected to the time capsule. Printing from iMac and MacBook is working OK, however I can not seems to get the DELL ( running XP ) to print.
    Network setup on the DELL is OK, I'm connected wireless, can access internet, etc... no prolem there.
    Any suggestions?

    Load bonjour for windows..
    Apple network resources are hidden from the PC.. without bonjour.. once you load that it should help.
    If you still have issues.. how is the printer connected.. USB is the big issue one.
    But if the printer is simply plugged into ethernet or wireless connected then the apple network is irrelevant. Just follow the HP instructions for installation of network printers.

  • How to connect wireless printer with new router

    I have a new router and I can get onto my computer wirelessly, but my printer won't work.  How do I chang the WLAN settings?
    Thank you

    patriciafrompalmdale wrote:
    It always has been.  It is not connected with a wire, just wireless.
    Go to System Preferences>Print & Scan
    Click the plus sign, printers on the local network will appear under 'Nearby Printers', select your Canon and the install will commence.

  • How do i send to a wireless printer when I have a cable connection to the internet? I have wireless

    I want to send to my secretary's wireless printer, but I have an ethernet cable connecting my computer to the internet.  Can I have both an internet and wireless connection so I can use the wireless network to send to her printer?

    Is your computer connected to the same local network as your secretary's?  If you have a router that provides both the wireless and wired network access for your business it should be possibe to access the printer wirelessly.  In my setup here I have a combination of wired and wireless computers accessing a couple of wireless printers as well as three on the wired network.  You may need to configure your router to allow the wored and wireless segments to communicate through your router.  I will move this post to the Printer Networking and Wireless forum for better responses. 
    It would probably help to give some details of the printer model as well as the details of your router and woreless connections.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Can't connect wireless printer to wired PC in wireless/wired network

    We have HP Officejet 6500A Plus (E710n-z) printer
    Wireless router with 4 ethernet connections (SAGEMCOM 2864) - some pcs connect wirelessly and we have 3 connected via ethernet (network has several printers, 2 netbooks, IPad, 2 laptops and 4PCs currently configured - but with 5 active users it changes frequently)
    Am able to connect printer to wireless PCs, laptops, etc - but cannot connect to wired PCs (running windows XP-home version)
    I'd like to avoid forcing IP address for printer (everything else is automatic)  - Is there another workaround?
    I do have another printer connected wirelessly to both wireless and wired PCs
    Install / troubleshooting software assumes network is either all wired or all wireless
    I don't mind using fixed IP address for install, but prefer not to use for ongoing connections
    Thanks for your help
    Nancy
    PS - one computer has problem with "serscan.sys" file not found - this can, I believe, be resolved once I find download *since no longer have the windows XP install discs
    This question was solved.
    View Solution.

    Hi Nancy,
    Have you tried running the HP Netwrok Diagnostic Utility, which is available at www.hp.com/go/tools?  I no longer have a WinXP machine so I can't verify that it works on WinXP but, assuming it does, it could help you diagnose the problem.
    Regarding using a static IP address, it is a really good idea (especially since it sounds like you know how to assign one to your printer).  It even helps to have a static IP once things are up-and-running because it generally prevents your PC's from losing contact with the printer.
    Craig
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    I am an HP employee.

  • Wireless Printer keep freezing when trying to connect to network

    I have a HP Officejet Pro L7780 All In One and it keeps freezing whenever I try to connect it to the network via Wireless Setup Wizard on the printer control panel. I tried uninstalling and reinstalling the software but it asks for me to connect my network through Wireless Setup Wizard which I can't do. Please help me. This is urgent. Can you please try and use layman (simple) terms when replying as my knowledge on printers and laptops are not that great. 

    Hi @Zo_e178 , and welcome to the HP Forums!
    I see you are experiencing connectivity issues.  I would like to help!
    I would recommend performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would then recommend this document on Wireless printing center Troubleshooting Issues.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Unable to connect wireless printer

    I am unable to connect my HP photosmart 5514 to my router-D link WBR 1310
    Wireless Network Test Results show MAC filtering is on. It is not.
    Very frustrating as I have 3 other devices connected and yet cannot connect my printer!
    Help? Suggestions?

    vbriere wrote:
    1. yes the router is broadcasting it's network name
    2. WPA is in use
    3. router is on channel 11 as it has been
    still this printer will not connect to my network...!!
    any other suggestions?
    Reset the printer to it factory defaults.  Use WPA2-AES encryption in your router.  Try another fixed channel, never 'auto'.  Power off both printer and router.  Power on router, wait 2 mns.  Power on printer and connect to your SSID with your password.  Now try.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • MacBook trying to connect wireless printer via A Express

    Am trying to connect my macbook with an existing linksys network to a wireless printer via an Apple Express.
    The computer seems to reconize the Apple Express but, in following the instructions to use the Printer Setup Utility to get the computer to recognize the connection, when I designate my printer I get and error message......." An error occurred while trying to add the selected printer Error -9672"
    Does anyone know a cure or, at least, where to research "error 9672" ??

    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click on Edit in the small window
    Click the Base Station menu at the uppermost top of the computer screen up where the Help, File, Window, etc menus appear
    Click Show Passwords

  • Trying to Connect Wireless Printer

    Seems like a silly question to me...but I can't for the life of me figure out how to do this.
    I just bought a Lexmark X6570 Wireless Printer, in hopes that it would wirelessly connect to my Airport Extreme. However, the only printer configurations I see for the Airport Extreme are to actually plug the computer into the Airport Extreme.
    Is there any way to add my new printer to the network without physically connecting it to the Extreme?

    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click on Edit in the small window
    Click the Base Station menu at the uppermost top of the computer screen up where the Help, File, Window, etc menus appear
    Click Show Passwords

  • Trying to connect wireless printer, asking for password for time capsule?

    Trying to connect new wireless printer and it's asking for my password for my time capsule.  I don't remember that I had entered one initially, but maybe I did and just forgot.  Any way to retrieve a password for time capsule?

    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click on Edit in the small window
    Click the Base Station menu at the uppermost top of the computer screen up where the Help, File, Window, etc menus appear
    Click Show Passwords

  • Unable to connect wireless printing

    I cannot the wireless network for wireless printing through my phone or computer. It asks me the passcode but I didn't set up any passcode and it happens as soon as I bought from the shop. Can someone tell me how can I fix that problem. Thanks!

    This is likely caused by your ISP controlling the router and local traffic.  DSL ISP routers are notorious for this.
    There are several ways to solve it:
    - Fix it dead - get your own router and attach it "on top of" your existing thomson router and direct all network attachments and traffic to your own router.  Shut off the wireless of the ISP's router.
    - Patch it - this sometimes works:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address). If you do not know this, enter the current IP address.
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Leave the gateway and DNS blank. Click 'Apply'
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Can't connect wireless print server

    I've been pulling my hair out trying to configure a D Link DPR-1260 wireless print server to work with a D Link wireless router on my system. I know I probably should have used Airport devices but then again I've always had trouble getting those things to talk to each other, too. Must be bad wifi karma or something. I've posted at the D Link site as well but they don't have many Mac users who can help with the setup. Anyone got a tip?

    Hi Bennyk-
    What is the specific problem?
    Luck-
    -DaddyPaycheck

  • How to connect wireless printer to ipad

    How to connect a wireless printer to my ipad2

    Is it an AirPrint enabled printer? If so they talk to each other easily.
    If not look for an app your printer manufacturer might have. Many of them are writing apps now.
    You can also look for info on the site for your printers maker, they may have more info.
    Failing that, there are third party apps like print n share or print central that give you printing ability.
    For more specific help, we need more specific info, such as what model of printer are you trying to work with?

Maybe you are looking for

  • Display driver'window pops up saying display drive stopped working while playing game'.

    then it goes back to facebook with black screen where the game should be displayed. this is on my, satellite L355-S7902

  • Mac Mini Mavericks won't sleep. Why

    Processor  2.6 GHz Intel Core i7 OS X 10.9.5 (13F34) Mini will not sleep either with command from Apple Menu nor opt/com Upper right arrow combo Energy Saver Settings on 10 minute default

  • Where to find the performance counter information?

    Code: class Program static void Main(string[] args) if(CreatePerformanceCounters()) Console.WriteLine("Created performance counters"); Console.WriteLine("Please restart application"); Console.ReadKey(); return; var totalOperationsCounter = new Perfor

  • Adobe PDF forms

    Hi all, Please help me out... In Adobe PDF forms, how should we assign master pages to body pages. Kindly give me the steps... in the Adobe LifeCycle Designer. Thanks in advance. Jaffer Ali.S

  • Can I do without Bridge?

    With Lightroom2, do I still need Bridge and if so why? Can I delete Bridge without causing any problems in Photoshop? I am using Leopard. Will dumping Bridge into the trash be the best way of getting it out of the system? Advice will be appreciated.