Connecting wirelessly to Netgear DGN2000 - with WPA

I'm not the greatest of technical folk but can usually manage to sort stuff out. Here is the problem. I've recently had to upgrade from a Netgear DG834G to a DGN2000 router. With the old router, the TiBook could connect wirelessly (but I am pretty sure I was using WEP as could not get the WPA working).
Have just installed new router and have got my iPhone and Wii connected wirelessly using something called Mixed WPA-PSK + WPA2-PSK. However, the Tibook can see the network, when I try to connect I get a box saying The selected Airport network requires a password to join. Wireless security is WPA Personal password (and I cannot change this to anything else). When I input the password I get this message: There was an error joining the AirPort network 'xxxxxxx'
I have just read this regarding connecting to WPA and the Airport software
http://support.apple.com/kb/ht2594
from which I gather I need version 3.3 or later. Looked to find what version I have and all I found was this in About this Mac/more info/airport card/wireless card firmware version 9.52
Where do I find what software I have?
Would really like to get this working.
Thanks in advance, Kate

Are you saying that 802.11g cards were the first to support WPA?
Some disambiguation is needed. Speed is not the issue here, but WPA compatibility. I'm in the same boat. However, for about 6 months, my TiBook w/Original Airport Card did indeed connect using WPA (at 802.11b on a "b/g" network)...but no longer...others on these boards have had the same experience.
My expanded comments are in this thread: <http://discussions.apple.com/message.jspa?messageID=12466697#12466697>
Message was edited by: Scott in Boston

Similar Messages

  • Can't connect to Netgear router with WPA enabled (MBP)

    I just received a Macbook pro today, everything is wonderful except wireless networking. When it first started up, it detected my wireless network, showed me the SSID, and asked for a password. I entered the password, and it failed to connect. I decided to try later and did the rest of the install.
    I connected via cabled ethernet and downloaded all of the updates. For a machine that shipped from the Apple store (custom config) a few days ago, I was surprised at having 13 LARGE updates to download. Grabbed them all, including a Firmware update which required two reboots. One for everything else, and another for the firmware.
    I tried again from sysprefs, and asked for the diagnostics. It asks me for my WEP key, and there is no option for WPA. I tried entered the WPA key anyway, despite only three WEP options showing up, and it still fails.
    Going through the Airport 'tab' and editing the connection, I get an option for WPA Personal, Enterprise, WPA 2 Personal, and WPA2 Enterprise as well.
    I tried using WPA Personal and WPA 2 Personal and entering the key which works on other notebooks, still no joy.

    Which Netgear router do you have? I use the Netgear
    RangeMax WPN824 and works well with WPA enabled but I
    think it may have failed to work the first time.
    WGT624 v2. Works fine with other wireless devices from a number of vendors, and is detected by the Mac, but I can't connect. I don't want to disable WPA if I can help it, I have a number of other systems configured for it as is, plus guests that come to visit.
    but some how I had to delete the connection,
    let airport find it again and re-enter the password
    to get it to work. One of those things I kind of did
    in the process of troubleshooting and can't remember
    exactly how it was I did it
    I'll try that and see if it helps. Thanks for following up.
    UPDATE: Sure enough, I deleted the network and added it back in by manually specifying the SSID and password, and it works now. No idea why, but there it is... thank you very much.

  • IChat AV not working when connecting wirelessly thru Netgear router

    Ok, I have read nearly EVERY forum out there about this issue, and I have tried nearly everything. I even called Apple. Noone can seem to figure out what the deal is.
    I have a Netgear WGR614 v5, and it is connected to a modem that I got from RoadRunner (Time Warner Cable).
    My cousin, who has a Mac identical to mine, is set up in the same fashion with a Netgear router.
    Neither of us can get a video connection using iChat. When we click the Accept button, it says "Connecting to ...." and then we both get an error that basically says there was a "communication error".
    I was informed of an Apple test address that I could test it with. AIM username is appleu3test03. I added it to my iChat buddy list, and clicked on the camera icon, and voila! It connected and I get an iPhone video (which is what is supposed to happen)
    So, what EXACTLY is that supposed to tell me???? The Apple test site says that means there is no problem with my connection, but that the issue is on my end somewhere....but I don't understand how that can be.
    Anyway, I don't have ANY firewalls on, and it works when I am connected directly with an Ethernet cable.
    PLEASE!!! HELP!!
    Thanks
    Cynthia

    Hi arvideo,
    OK IS the UPnP on in this device ?
    And no Port Forwarding or Services set ?
    IS it the only device connected to the internet ? (is there another router or a modem ?)
    1:18 PM Sunday; August 12, 2007

  • Satellite A100-003 WLAN connection timeout(with WPA-PSK)

    I have a Satellite A100-003 notebook with preinstalled Windows Vista.
    When I try connect to my router with WPA-PSK (TKIP) I have error:
    Wireless authentication failed because of a timeout.
    My notebook and router configurated correctly!! I installed new intel drivers for 3945ABG chip.
    WPA2-PSK and WEP work fine.

    Hi
    The same happened on my old notebook.
    I was not able to establish the WLan connection for longer than 1min with WPA encryption.
    I have downloaded the newest Atheros driver and updated everything.
    Everything works fine with WEP but not WPA.
    Then I have disabled the Windows own configuration option and use the Atheros client utility. Now everything works fine!
    I would recommend using the Intel Proset utility and check all possible settings!

  • Slower connection with WPA-PSK

    Hi, I'm new to Apple and the whole Apple discussion board.
    I recently converted to Mac and have one of the new 20" Intel iMacs. I looked through the available discussions but none of them quite addressed my issue:
    I recently received a new 2Wire router from ATT-Yahoo DSL. I have it connected by ethernet cable directly to my old PC, and my Mac connects wirelessly via Airport.
    For security reasons, I tried to switch my encryption from WEP (which was the default) to WPA (WPA-PSK is what actually showed up as the option on the 2wire site), and when I did, the wireless connection was dramatically slower. So slow that I couldn't stream music from sites like rhapsody. When I switched back to the WEP default code, the problem seemed to correct itself.
    1) Is there something I needed to adjust as well, either on the Mac or on the 2wire site, when I changed the encryption to WPA, to avoid the slow-down?
    2) How great is the security advantage of WPA over WEP? I've configured the settings so that my wireless network doesn't appear automatically on other people's computers.
    I'm new to the wireless game as well. Thanks for anybody's help to the above.

    Hi
    The same happened on my old notebook.
    I was not able to establish the WLan connection for longer than 1min with WPA encryption.
    I have downloaded the newest Atheros driver and updated everything.
    Everything works fine with WEP but not WPA.
    Then I have disabled the Windows own configuration option and use the Atheros client utility. Now everything works fine!
    I would recommend using the Intel Proset utility and check all possible settings!

  • I have a TC which is connected wirelessly to my router.  I would like to connect a mac in another location via ethernet to the TC.  I can't seem to get it to connect.  Am I missing something?

    I have a virgin Superhub which serves my wireless needs throughout the house.  I have a Timecapsule which connects wirelessly to the router with no issues.  I can backup my MBP over wireless easily.  I have now got another machine in a different part of the house that I would like to connect to the network.  It doesn't have wireless so ethernet is the only option.  I have a number of options 1) run cabling - not really possible  2) buy a powerline network system or 3) use the timecapsule to connect to the network/internet. 
    I like option 3 because
    (a) - I don't have to spend any more money and
    (b) - my wife wont complain about cables also see (a)
    Should using mixed wifi and ethernet clients on a timecapsule work?  if so is it a feature I can use out of the box so to speak?
    Thanks

    Should using mixed wifi and ethernet clients on a timecapsule work?  if so is it a feature I can use out of the box so to speak?
    Thanks
    No a TC cannot do what you want.. it is now in dumb stupid wireless join mode.. and it turns off the ethernet ports.. in case you want to use the TC as a wireless bridge to multiple clients which is plainly wrong.. (only airport express is allowed to do this since it has only one ethernet port).
    Welcome to Apple. (The plainly wrong above is a figment of Apple imagination.. of strict network protocols.. but unhelpful for a home device. maybe also to encourage sales of expresses.)

  • Connecting wirelessly to projector and speakers.

    I have my projector connected wirelessly to my ipad with Apple TV and Airport Express. I also have a JBL wireless speaker that I would like to connect wirelessly.  On the ipad I have to select either "projector" or "JBL speakers" using bluetooth.  Is there a way to connect to both?  Thanks.

    Both the projector and speakers show up under airplay.  I have to select one - just wanted to know if I could use both.

  • Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

    Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

    Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?

  • I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

    I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

    Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

  • Impossible connecting with wireless network Netgear WNR 2000

    I can not log on to my wireless network (Netgear WNR 2000) with my macbook. My other PC:s work fine and connect always. My Macbook only connect after I have restarted the router. When I use my Macbook in other places I can connect with wireless network. What is the problem?

    I'm assuming that you're using the right network password!  After that, the most common causes of difficulty are:
    - The router not set up for DHCP and so cannot allocate an IP address to the MacBook
    - The router has "MAC" Address Authentication (a security feature - don't mistake MAC for Mac[intosh]) turned on and the AirPort MAC address isn't in the pass list.
    - The default "Automatic" location in System Preferences > Networks has been modified so that it no longer works.
    Bob

  • No Internet connection on wireless with WPA after 10.4.10 update

    After the 10.4.10 update I can't connect to my network that uses WPA encryption. I'm able to connect to the router fine and ping computers and the router in my network but I can't view any websites. DNS to outside websites works too. I can view websites fine from my windows laptop connected via the same wireless router. Internet does work on my mac when I connect via my neighbor's open wireless connection so that's why I figure that encryption is the issue.
    I have searched and read other posts on the forum and done what the recommened... I deleted the keychains related to my wireless router and deleted the router from my preferred networks then re-added the router. I have also run the permissions repair and reinstalled the 10.4.10 update. Nothing has helped.
    I'm a mac newbie so if I'm missing any information that could help diagnose, please let me know.
    Thanks!

    I have a wifi-related problem with 10.4.10 as well. Everything works fine when I'm plugged in, but when I switch to battery power, I can use the network just fine for a while, and then I'm cut off. I'm still connected to my wireless network, but no data comes in. Data input is restored once for a brief period, but then it dies completely and the only solution is to reboot. I'm having this behavior on my C2D MacBook (2GHz, 2GB), and a workmate has been complaining about a C2D MBP and a C2D MB dropping their wireless connections after the 10.4.10 upgrade. So it seems like something's borked on the wireless side.
    I'm going on a two-week trip on Sunday and in the destination I'll depend on the wireless, so anyone with a quick solution has just earned him/herself a beer

  • My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly.  I could with my netgear but not with my airport extreme, any ideas?

    My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly.  I could with my netgear but not with my airport extreme, any ideas?
    I have restarted all units, disconnected and reconnected

    Hi ryanfromstockbridge,
    I apologize, I'm a bit unclear on exactly what you are seeing when you try to add the printer or print to the printer. If you continue to have issues printing to this wireless printer, you may find the information and troubleshooting steps outlined in the following articles helpful:
    OS X Yosemite: Printing troubleshooting
    Troubleshooting printer issues in OS X - Apple Support
    OS X Yosemite: Add or remove a printer
    Sincerely,
    - Brenden

  • Wireless with WPA Encrytion doesn't fully connect

    Hi, I have a D-Link(DI-624) router with 2 Windows XP machines and one Powerbook connected. The Powerbook and one XP Desktop are connected wirelessly using WEP 128bit encryption. Everything works fine. I discovered that WEP is not the best and want to switch to WPA encryption. Problem is when I switch to WPA I cannot get the Powerbook to connect properly.
    I get a message that it is connected but not interent and no filesharing. It seems that the DHCP server is not giving the Powerbook a proper IP address. It is not an IP address that the D-Link supplies.
    Can anyone help?
    Thanks
    Powerbook G4 15"   Mac OS X (10.4.3)  

    Robert,
    Welcome to the Apple forums.
    You're correct that WEP is not as secure as WPA (WEP can be cracked in 15 minutes). Excluding WPA for the business enterprise, there are two that we're interested in, WPA Personal and WPA2 Personal. In my network, which has mixed Windows XP and mac systems, my PB has used WPA Personal, and on the router I used WPA with TKIP (AES, instead of TKIP, didn't work for me). This works fine.
    Using WPA2 Personal, which is more secure than WPA personal, on the PB, requires changing the PB to WP2 Personal, as well as the router to WPA2 Personal and "TKIP or AES" (that's not a choice, it's one entry on my router). Again, this works fine.
    Is your router using the most current firmware?
    If you're set up similar to the above, and changed nothing else, you should be getting a proper IP address from your server, as you were before under WEP. I'd recommend you try this: With your various security settings in place, turn off your router, your PB, and your Cable/ADSL modem. Wait 4-5 minutes. Then turn on the cable/ADSL modem and let it complete it's startup, then turn on your router and let it complete it's startup, and then your PB.

  • I am on vacation and I am unable to get internet connection using my Powerbook G4 (with built-in Airport). It is only showing a WPA Personal for the wireless security option and the resport password is being rejected. How can I get connected?

    I need some help trying to get connected from a remote location with my Powerbook. I am a graphic designer on vacation and need to keep in touch with my clients. Need help ASAP!

    Looks like you are working with a vintage product and the operating system is a little outdated, which makes it harder to troubleshoot. It's possible that it doesn't support WPA (depending on the Airport card built-in). Otherwise, if you can connect via ethernet, check for software updates. It even might be as simple as restarting the computer.

  • Wireless-Card doesn't not work with WPA/WPA2 but with WEP [Solved]

    Hello I have a MacBook (late 2007) with a wireless-card from Broadcam, the card works with WEP and the classic configuration over rc.conf very well. But I can't get the card running with WPA and the net network-profiles.
    Here is the link to the driver - http://www.broadcom.com/support/802.11/linux_sta.php
    eth2 = wireless-card
    eth1 = firewireanything
    eth0 = wired-card
    rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.utf8"
    HARDWARECLOCK="UTC"
    USEDIRECTISA="no"
    TIMEZONE="Europe/Berlin"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    #MODULES=(sky2 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="macbook"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    eth0="eth0 192.168.1.220 netmask 255.255.255.0 broadcast 192.168.1.255"
    INTERFACES=(!eth0 !eth1 eth2)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.1.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    NETWORKS=(wireless)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng network net-profiles netfs alsa crond portmap fam hal)
    /etc/network.d/wireless
    CONNECTION="wireless"
    INTERFACE=eth2
    HOSTNAME=macbook
    IP="static"
    IFOPTS="192.168.1.225 netmask 255.255.255.0 broadcast 192.168.1.255"
    GATEWAY=192.168.1.1
    DNS1=192.168.1.1
    # Wireless Settings (optional)
    ESSID=3Com
    #KEY=
    IWOPTS="mode managed essid $ESSID channel 11"
    #WIFI_INTERFACE=wlan0 # use this if you have a special wireless interface
    # that is linked to the real $INTERFACE
    #WIFI_WAIT=5 # seconds to wait for the wireless card to
    # associate before bringing the interface up
    USEWPA="yes" # start wpa_supplicant with the profile
    WPAOPTS="" # use "" for normal operation or specify additional
    # options (eg, "-D ipw")
    # see /etc/wpa_supplicant.conf for configuration
    Can I set here the WPA/WPA2-Key also? Why here ESSID? Do I need still a configuration in wpa_supplicant.conf?
    Thats very confusing and not explained.
    WPAOPTS? Do I need to add something like "-D wext"?
    /etc/wpa_supplicant.conf
    # This is a network block that connects to any unsecured access point.
    # We give it a low priority so any defined blocks are preferred.
    ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
    network={
    key_mgmt=NONE
    priority=-9999999
    network={
    ssid="3Com"
    proto=WPA
    key_mgmt=WPA-PSK
    pairwise=CCMP TKIP
    group=CCMP TKIP
    psk="topsecret"
    priority=5
    # WPA2
    # proto=WPA RSN
    I need help. Please
    Last edited by hoschi (2009-01-04 20:21:58)

    fwojciec wrote:If this info is not in the wiki it might be worth it to add it -- it's all detailed in /etc/network.d/examples/complete.example though.
    Thats the reason why I was so confused.
    My new and well working configuration:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.utf8"
    HARDWARECLOCK="UTC"
    USEDIRECTISA="no"
    TIMEZONE="Europe/Berlin"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    #MODULES=(sky2 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="macbook"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    eth0="eth0 192.168.1.220 netmask 255.255.255.0 broadcast 192.168.1.255"
    INTERFACES=(!eth0 !eth1 !eth2)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.1.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    NETWORKS=(3com)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng network net-profiles netfs alsa crond portmap fam hal)
    CONNECTION="wireless"
    DESCRIPTION="Very verbose complete wireless example"
    INTERFACE=eth2
    HOSTNAME=macbook
    # Interface Settings (use IP="dhcp" for DHCP)
    IP="static"
    IFOPTS="192.168.1.225 netmask 255.255.255.0 broadcast 192.168.1.255"
    GATEWAY=192.168.1.1
    # DNS Settings (optional)
    DOMAIN=localdomain
    DNS1=192.168.1.1
    DNS2=
    SEARCH=
    # Standard Wireless Settings
    ESSID=3Com
    SECURITY=wpa-config # One of wep, wpa, wpa-config, none
    KEY=""
    # Scans to see if network is available before connecting (reccomended)
    SCAN="YES"
    # Time to wait to connect to a network. Default 15.
    TIMEOUT=10
    # Pass *custom* options to iwconfig. Usually not needed (optional)
    IWOPTS="mode managed essid $ESSID channel 6 key restricted $KEY"
    # Any extra arguments for wpa_supplicant
    WPA_OPTS=
    # For SECURITY='wpa-config' only - filename of a wpa-supplicant config
    WPA_CONF=/etc/wpa_supplicant.conf
    # This is a network block that connects to any unsecured access point.
    # We give it a low priority so any defined blocks are preferred.
    ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
    network={
    key_mgmt=NONE
    priority=-9999999
    network={
    ssid="Linksys"
    proto=WPA RSN
    key_mgmt=WPA-PSK
    pairwise=CCMP TKIP
    group=CCMP TKIP
    psk="areulookingatmybreasts"
    priority=5
    network={
    ssid="3Com"
    proto=WPA
    key_mgmt=WPA-PSK
    pairwise=CCMP TKIP
    group=CCMP TKIP
    psk="nomam"
    priority=5
    # WPA2
    # proto=WPA RSN
    There are also profiles for the Linksys-Router and for wired cable.
    Thanks for the help!
    Last edited by hoschi (2009-01-04 20:21:23)

Maybe you are looking for