Connecting wirelessly with Printer

I've had several questions about setting up a new iMac. The groups have been very helpful. I guess I can only work through one concern at a time, so here's another. I have internet cable (Mediacom) and plan to get Airport Extreme so that I can place the new iMac in another room in the house. The specs on the iMac say it has BlueTooth 2.1. I have a HP AIO Model 8500 printer, which will be moved also, but it will be across the room from the iMac. HP has a BlueTooth adapter to make this printer wireless, but the adapter is BT 2.0. Do I need to look for an adapter, not necessarily HP brand, that is 2.1?
My desktop runneth over! As we used to say in Apple IIE!
Thanks!
Martha

If you have the base model AIO 8500 it has both ethernet and USB connections. It is NOT recommended to use BlueTooth because it extremely slow for printing. However if you have the AIO 8500 wireless or 8500 Premier both have wireless built right into them. With the latter two models you can set up a true wi-fi printer meaning it will perform all of the functions (print, scan, fax and copy) wirelessly. You just wirelessly connect it to the router and as long as it's within range of the router you are set. If you have the base model your best bet is to connect it via ethernet to the router, this will still give you a true AIO experience. If you connect it via USB to the Airport Extreme (AE) it will ONLY print (no fax, copy or scan) because the AE only supports USB printing.
Regards,
Roger

Similar Messages

Hp laserjet Pro 200 M276nw won't consistently connect wirelessly with iMac

I'm on my second brand new hp laserjet Pro 200 M276nw in 3 days, it will not consistently connect wirelessly with my newly purchased (8days old) Apple refurbished 27" iMac on OSX 10.9, i7 chip & Fusion Drive. The hp laserjet will sometimes connect wirelessly immediately after clicking "print" on the iMac, but about half the time it says "printer not connected" & takes 2-4 minutes (or longer) before the devices do connect. I've called hp support many times, they're reset various things via remote takeover of my iMac, the printer will work for a few of minutes but then the same problem returns. AppleCare made sure I have the
correct Airprint driver installed & also checked my settings, but says they don't know why this is occurring. I've also verified that our newer (6 months old) AT&T router is functioning correctly.
My older hp laserjet (CM1312nfi MFP) has worked flawlessly since 2009 via USB connection with my old iMac (still on Snow Leopard), I assumed it would continue with the new one, but there is no software update for Mavericks & the scanning feature won't operate on the new iMac. Hp says it is a discontinued model. The new hp laserjet is a successor model to the older one, they are both very similar except for the new wireless feature.
I can print fast & wirelessly from the new iMac via a different new hp inkjet printer (8600 series) here in the house. This inkjet printer is less than a month old, I installed it myself for a Windows laptop here, it has never malfunctioned. Unfortunately it's upstairs & I do not like inkjet print quality, I need a good laserjet here in my office downstairs next to my iMac.

HI there
Did you manage to sort this issue out - as I have exactly the same problem.
Lots of similarities as I also have an inkjet 8600 which works via USB and wirelessly no problems at all!
I always buy HP printers as they are usually easy to set up - but this one is making me tear my hair out!
I've even upgraded to Yosemite and downloaded the new drivers from HP - no success. The printer will print one page and then become unavailable.
I can print via USB or wireless direct - but not just via my wireless network which is what I want to do!
No responses posted - so assume no one has a fix.
aaaargh!!!

HT1860 my apple tv (1st gen) has worked fine for a year/ All of a sudden it has stopped displaying any movies or tv. It only displays my movies or my tv that has been previously down loaded. however it appears connected wirelessly with good strenght. Any

my apple tv (1st gen) has worked fine for a year/ All of a sudden it has stopped displaying any movies or tv. It only displays my movies or my tv that has been previously down loaded. however it appears connected wirelessly with good signal strength. Have tired swithing off both router and apple TV. Any ideas?

This is a known, ans ongoing issue. Rest assured you're not the only one affected. There are several threads here already discussing this, I suggest searhing them out if you want more details, and possible work-arounds for locally hosted content.

Printer not connecting wirelessly with iMac

MacBook Pro working on OSX 10.4.11 wirelessly with Epson PX710W. Tried to add iMac on OS X10.5.8 but failure to connect on every attempt after numerous sessions with Epson Support. Have repaired permissions having previously run verification of HD which was reported OK. Reset printer system and reinstalled drivers without success. Still receiving message job stopped on both computers. On setting up the sample page to print, when selecting the PX 710W printer or the other printer option, there is a quick flash. Then the MacBook will not print due to 'communication error'. But if the PX710W is turned off and then on again, the MacBook will print.
Any help would be appreciated.

Switch router to channel 1. Disable and remove all security on the router. Now try to connect to your unsecured SSID. Are you successful?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Trying to Connect Wireless Epson Printer with Time Capsule

Greetings. I am a regular Mac user and using Mac for several years now. However, I am a new to network administration. I have a Linksys wireless router that syncs our 5 Macs (one iPad-1 iMac and three MacBook Pros), plus 4 Windows PC's we have in our network. I recently decided to purchase a Time Machine, and further our use of Apple technology in wireless devices. I want to back up all my computer's files to Time Machine and use the Airport Extreme functions of Time Machine while discontinuing the use of my LinkSys router. However, I can't get my Epson WorkForce 600 to wirelessly connect to Time Capsule in order to use the scanner & fax functions. Connecting the printer by USB enables the printer function, but disables all other functions of the printer (fax-scan, etc.).
I tried downloading new Epson drivers and couldn't get some of them to install. This time My iMac wouldn't install the .dmg files. I tried opening the .dmg file and installing. The pop up box requiring my administrator password, kept flashing when I tried to enter my password. Since I couldn't get the .dmg files to install, my plan to update Epson driver's didn't work. Question #1: I am looking for advice how to install these weird disk image files ?
I turned off my Time Capsule, re-connected the LinkSys to the cable modem and all my wireless functions work again, especially my printer. Sadly, no Time Capsule.
I read another discussion suggestion connecting both wireless devices together. I assume since I want to use Time Capsule that I set it up with the modem and connect the other router to it via one of the four ethernet connections. I didn't want to try this until I received further advice. I am hoping I can connect my LinkSys router to Time Capsule and use the printer through the LinkSys connection with all other computers on my network.
Question #2: How can I get my Time Capsule to find the Epson so I can use it again, or should I just use the LinkSys router connected to the printer?
Thank you in advance for help.

This sounds as if you are trying to use instructions that are more than 2 years old at this point, but you are using a new version of AirPort Utility Utility in Lion or Mountain Lion....which would not track or apply to the older instructions.
Can you confirm what operating system that you are using on the Mac that is being used to configure devices?
The new AirPort Express will connect directly to the Time Capsule using an Ethernet connection, correct?

Brand New C309g will not connect wirelessly with ANY wireless security options enabled

Printer will connect via wired ethernet. I can use the http utility.
Printer will connect via unsecured wireless connection.
Printer defaults to autoconfig (169.xxx)when connected via WEP (both open and shared), will not connect with a manual IP address. Cannot access http utility.
Printer won't even autoconfig when connected via WPA-Personal - instead says "No connection found."
Printer is in the same uncluttered room as the router.
ALL OTHER wireless network devices work fine and keep up with security changes.
I have legacy devices on the network that make me want to run with WEP.
I've run the HP Network Diagnostic. It can access my router just fine. It cannot find the printer.
Router is D-Link DIR-655.
I jump through the right hoops - refresh router, restore factory defaults on printer, etc. All other wireless network devices work fine.
I want to pull an "Office Space" on this brand-new printer - please save me from doing so!
-mooi
This question was solved.
View Solution.

Ooops, my mistake. Thanks for pointing it out.
Another idea is to make sure the firmware is updated on the router.
Also, from the control panel of the printer: Setup > Network > Wireless Network Test. It will self-test the printer radio.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Unable to Connect Wirelessly to Printer

Hi all.
Since I had my BT Infinity installed I am unable to connect to my printer Wirelessly like I had previous. I have an Epson SX600FW Inkjet All-in-One Printer. I have the BT Homehub 2.0. How do you configure this hub/router for the Wireless Printer? I cannot see any way of doing this?
Out of desperation, I have even tried to attach my old Router to the Homehub (even replace the BT Hub with it) but got nothing at all. Not even internet connection!
Can anyone help?
BT Infinity (Option 2/Unlimited) - BT Telephone (Unlimited 24/7 calls) - BT Vision (The Whole Lot! inc Sky Sports & ESPN)
Solved!
Go to Solution.

rdec1945 wrote:
Infinity installed yesterday. Works perfectly both with laptop and Wi Fi Blue Ray DVD but will not work with printer which is an Epson Stylus SX425W. I have set up printer ok to run on Wi Fi but it will not print and I keep getting error messages. Spoken to Epson who have been thro the set up, confirmed that all is ok and asked me to print a status check. This says that network is working correctly but "A router/access point channel conflict has been detected". According to Epson, the solution is for the BT Hub to be configured so that it allows any Epson product through it's firewalls, and for MAC address filtering to be turned off. This is out of my league - is there anyone out there who recognises this issue and can help?
Hi rdec1945
I dont use that printer but the epson PX710W.
Have you used the printers on screen menu.
Setup
OK
Network Settings
OK
Wireless setup wizard or even Advanced setup and then WPS Wireless LAN setup, where you use the WPS button on the side of the HH3.
Setting up mine did not involve opening any thing in the firewall or doing anything with MAC address filtering.
[edit] have a look at this post from geaves, again not the same printer but suggests setting it up with ethernet first, I think its post 6.
http://community.bt.com/t5/Other-BB-Queries/Cant-get-wireless-printer-working-with-Home-Hub-3/m-p/29...
toekneem
http://www.no2nuisancecalls.net
(EASBF)

I Can No Longer Connect Wirelessly With My iPad!

About 2 days ago my iPad suddenly stopped connecting wirelessly to my BT HomeHub.
I have deleted all of the networks available to me and reinstated them, I have carried out a full Restore of my iPad and I have switched all of my equipment off and back on again. But to no avail.
Although my HomeHub is ticked on the list of Wi-Fi networks on my iPad every time I try to connect to the internet to browse, get mail or listen to the radio I receive a message stating "Connection failed. The internet connection appears to be offline". On occasions I get a BT Wholesale error message! This happens whether I try to connect via my HomeHub or BTFon or BT Openzone etc.
This is VERY inconvenient as it makes my iPad just an expensive photoframe!
Incidentally, my BT HomeHub no longer recognises my password. This has made me forget which is the correct password for accessing my HomeHub. Is it the Wireless Key (WPA)? Or the Admin. Password? I've tried both of those and neither work.
Why oh why do electronics have to go wrong when I need them most!
Julian Brown

Hello,
All the information you need is printed on the back of the Hub. There are two passwords, one for the Wireless setting (WPA password) and one for access to the hub (Admin password).
(Taken from http://www.jarviser.co.uk/jarviser/images3/newhubpswd.jpg ).
If you have forgotten what you changed the admin password to, then I'm afraid you're lost and you should factory reset your Hub:
http://bt.custhelp.com/app/answers/detail/a_id/11386/~/how-do-i-reset-my-bt-home-hub-to-its-factory-...
Hope this helps

Can no longer connect wirelessly with other computers

I have an iMac and a Macbook Air. For some reason I can no longer connect wirelessly between the two. They don't show up in Finder. Therefore I can't use "Remote Disk" on my Macbook Air to install programs.
Recently I switched from using an Airport router to a Cisco router. Could this be the problem? I can still connect to the internet through my wireless network, but can't find my computers.

Hello,
All the information you need is printed on the back of the Hub. There are two passwords, one for the Wireless setting (WPA password) and one for access to the hub (Admin password).
(Taken from http://www.jarviser.co.uk/jarviser/images3/newhubpswd.jpg ).
If you have forgotten what you changed the admin password to, then I'm afraid you're lost and you should factory reset your Hub:
http://bt.custhelp.com/app/answers/detail/a_id/11386/~/how-do-i-reset-my-bt-home-hub-to-its-factory-...
Hope this helps

Problem connecting wirelessly to printer

Hi, I used to be able to connect wirelessly to my HP Envy 120, and then for some reason it stopped working from my Macbook - I can still print from my iPad, and my daughter can print from her PC. Any ideas?

Hello themaven. Welcome to the Apple Discussions!
Does your client's ISP require that she registers the MAC address of the device that will be connected to their Internet service? If not, then it is possible that the communication between the Internet modem & the Time Capsule (TC) has not been properly established.
I suggest trying the following:
o Power-down the modem, TC, and computer(s); wait at least 10-15 minutes. Order is not critical.
o Power-up the modem; wait at least 10-15 minutes.
o Power-up the TC; wait at least 5-10 minutes.
o Power-up the computer(s).
The computer(s) should now have Internet connectivity from the TC whether they are connected to it by Ethernet or wireless. Please post back your results.

Connecting wirelessly with a router

Hey all,
Got a question about wireless internet.
I have a Netgear router that is connected to my PC and Airport on this new Mac is picking up the signal broadcast by the router in order for me to connect to the Internet.
My question is: if I get rid of the PC, which I intend to do in the near future, will the router have to be connected to this Mac in order for me to connect to the net? Because I actually want to be able to connect wirelessly around my house without being tied down like the PC was. Furthermore, is it possible to just have the router plugged in but not connected to a computer as such and still broadcast the signal needed for me to connect to the net?
Any information on this will be greatly appreciated.
Thanks,
Joe

Joe,
No, you do not need to have any computer connected directly to your router. I assume that the router is also connected to a cable or DSL modem. This is all that is required to gain access to the internet; the modem establishes communication with your ISP's server, and the router gains a "public" IP address. The router then grants "private" IP addresses to every computer or device that connects locally within your network (regardless of whether that connection is "wired" via ethernet or wireless), and shares its single public IP address among the private addresses it manages. That's how routers work.
Scott

WRV54G - Problems connecting wirelessly with Windows 7

I'm unable to connect wirelessly to router using a HP laptop with windows 7. I have 2 xp laptops that connect without a problem. The HP laptop finds network, but once I click on network to connect, it does not ask for the security code therefore I can not connect to network.

Hi. I think you need to verify your router MAC Filtering. I would suggest to disable it first. Check this link,
http://linksys.custhelp.com/cgibin/linksys.cfg/php/enduser/std_adp.phpp_faqid=20600&p_created=125498...
Also, make sure you're using the latest firmware for the router. Don't forget to manage the Profile of the card as stated on the link provided above. Thanks.

Will my iMac connect wireless with my ISP modem?

Do I need to specifically have an airport express or airport extreme base station to connect wirelessly to the internet? I have a modem that was supplied by my ISP. When I try to connect to the internet, the serial number for the modem appears, however, when I enter my WEP password, I get an error message that "there was an error joining the airport network." I also have an ibook G4, and have no problem connecting with it.
The tech's at my ISP aren't much help, as they're not mac-friendly.
Any ideas?

Do I need to specifically have an airport express or airport extreme base station to connect wirelessly to the internet?
No. If your iMac G5 has built-in wireless, or has the AirPort Extreme card installed, it can join any 802.11b or 802.11g compatible wireless network.

Cannot connect wirelessly with wpa_supplicant or netctl

Hey, I just installed arch linux. Also, I feel like I've accomplished some rite of passage just registering for these forums, as I had to get that command for the security question figured out (it failed a few times) then manually copy it to my laptop, which I'm using now. Anyway, here's my problem:
I failed to properly configure my internet connection while chrooted, as per the beginner's guide. Now I'm trying to fix it; I believe it's a problem with my config file. Here it is:
Description='Home wireless; WPA-encrypted'
Interface=wlp7s6
Connection=wireless
Security=wpa
IP=dhcp
ESSID='HOME-3D58'
# Prepend hexadecimal keys with \"
# If your key starts with ", write it as '""<key"'
# See also: the section on special quoting rules in netctl.profile(5)
Key='#######'
# Uncomment this if your ssid is hidden
#Hidden=yes
I sure hope I copied that right, I'm manually copying it from my desktop (where I just installed arch) to my laptop, which is up and running crunchbang.
when I execute
netctl start home-wireless
I get the output
Job for netctl@home\x2dwireless.service failed. See "systemctl status netctl@home\x2dwireless.service' and 'journalctl -xn' for details.
executing the former (systemctl status....) gives
netctl@home\x2dwireless.service - Networking for netctl profile homex2dwireless
Loaded: loaded (/usr/lib/system/[email protected]; static)
Active: inactive (dead)
Docs: man:netctl.profile(5)
executing the latter (journalctl -xn) gives: (NOTE: dates and times have been left out because I'm tired of typing all this) also, replace <mac-address> with the mac address of my router (at least, I think it's my router...)
wlp7s6: deauthenticating from <mac-address> by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlp7s6: authenticate with <mac-address>
wlp7s6: send auth to <mac-address> (try 1/3)
wlp7s6: authenticated
wlp7s6: associate with <mac-address> (try 1/3)
wlp7s6: RX AssocResp from <mac-address> (capab=0xc11 status=0 aid=6)
wlp7s6: associated
wlp7s6: deauthenticating from <mac-address> by local choice (reason=3)
cfg80211: Calling CRDA for country: US
Derp.
when I try to use
iw dev wlp7s6 scan | grep SSID
I find my router (HOME-3D58). I then ran
wpa_supplicant -B -i wlp7s6 -c <(wpa_passphrase "HOME-3D58" "#######")
then, the console outputs
Successfully initialized wpa_supplicant
however, if I try to ping any website, I am told that the "network is unreachable"
halps?

Sorry because I am reading your post very fast and no deeply.
But, I think parameters like essid and key must not have quoting.
essid=myessid
key=/"####what you get from wpa_passphrase
This message:
Successfully initialized wpa_supplicant
not means you are connected.
Edit: (added)
There is an example in ArchWiki:
https://wiki.archlinux.org/index.php/Ne … bit_PSK.29
/etc/netctl/wireless-wpa
Description='A simple WPA encrypted wireless connection using 256-bit PSK'
Interface=wlp2s2
Connection=wireless
Security=wpa
IP=dhcp
ESSID=archlinux
Key=\"64cf3ced850ecef39197bb7b7b301fc39437a6aa6c6a599d0534b16af578e04a
Last edited by Alber (2013-06-28 12:32:03)

Problem connecting wirelessly with HP 6310 printer

Since our computer automatically updated from Windows 8 to 8.1 a couple of weeks ago, we have not been able to use our HP 6310 printer. It connects with the computer through a wireless internet router. Have updated the HP driver to 8.1 to no avail. Any suggestions would be appreciated. Thanks.

Hey there @Benjie18 ,
I read your post about how you cannot use your Officejet 6310 printer since upgrading to Windows 8.1. I have a few ideas that come to mind that I am going to suggest and I hope they help!
1. Run the Print and Scan Doctor, which may find the problem and correct it.
2. Make sure the printer can make copies.
3. Try Uninstalling the Printer Software, restarting the PC and reinstall - HP Photosmart and Officejet Full Feature Software and Drivers
Let me know the results. If you run into any issues or errors, let me know!
Have a great day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Connecting wirelessly with Printer

Similar Messages

Maybe you are looking for