CONNECTING WITH HOME PLUGS

Can anyone help? I have either got it all wrong and you cant do it or I'm missing something very simple.
I have terrible Wi-Fi throughout the house but a good BB speed so I thought I would connect via Home plug's I got 3 connected one to my HH3 and another to my main computer upstairs after I had disabled the Wireless adapter it connected to the network and works great.When I came to my laptop in the Kitchen It wont connect to the network it shows UNIDENTIFIED NETWORK No Internet connection and never mid what I try it wont change to the home network. I have disabled the Wireless on the HH,reset the HH and tested the Home plug which appears to be working.
Anyone got any ideas?
Thanks 
Solved!
Go to Solution.

You may find info here if you do not have the manual
http://www.devolo.com/consumer/downloads.html?l=en
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me

Similar Messages

  • Cant use iphone4 wifi connect with home network

    Updated iphone4 version 4.3.2 the phone still cant connect with home network via wifi! When before updated was everything normal!
    Could anyone help?
    I switched the rounter on and off and the securty ps from the rounter is correct! But it keeps sayin cannot connect with xxx network, and i have to keep "dismiss" it!
    Please help, is the iphones problem or my rounter?

    ive tried that also, completely disconnecting the modem and router but still same problem, updated iphone software, reset factory and network settings.. still nada thanks for your input tho

  • WRT120N problem with home-plug "TL PA101"

    I have bought a WRT120N few days ago.
    I have one PC is connected to the router though home-plug "TL PA101".
    But I find that the router cannot detect the home-plug in the GUI ->status->DHCP client.
    And also the "network magic" ->add device or network map.
    But the LED on the router port (home-plug) is twinkle. 
    The PC cannot access to Internet.
    By the way, the connection is OK if I directly plug the cable into the router port.
    Can anyone help me about this question?

    Did you connect your computer directly to the ethernet slot on the router.. and then check if you were able to go online or not.. then you can also check the DHCP client table (For a valid ipaddress).

  • Bought new iphone 6 with Verizon plan 2/11/15. Tried to connect with home wifi  3 or 4 times with I thought the correct password. Now it says Forget This Network Can't its the only one I have and this laptop is connected just fine. How do I clear this and

      Bought a new iphone 6 with Verizon plan 2/11/15. Tried to connect with my home wifi  3 or 4 times with I thought the correct password but now it says Forget This Network and wont let me try again. Can't its the only network available. How do I clear this and start over. Thanks, this laptop connects fine but this is my first smartphone and  I don't see why it gives a crap if I  mess up 50 times! Help!

    Help is right here for you Omichael! Let's get you conneted
    to your home wifi. May I ask are you able to connect to other wifi networks? If
    so then please forget your home network again, turn wifi off, reboot, and
    retest. If this doesn't work then you will want to reset network settings.
    Settings > General > Reset > Reset Network Settings. Keep in mind that
    this will delete ALL wifi passwords that you have saved.
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • TS1398 how do i configure so i phone connects with home wireless automatically? currently, it connects to prior owners wireless since disconnected.

    how do i configure wifi so my Iphone connects w home wireless automatically?

    Hi Tesserax
    You could, but its benefits may depend on how you have it configured with the D-Link router. That is, do you have the TC directly connected to the D-Link by Ethernet or is it just wirelessly joining the D-Links' wireless network?
    I have the TC connected via Ethernet cable.
    I am assuming that you have the 802.11n AirPort Express Base Station (AXn) configured as a wireless client so that it can join the D-Link's wireless network for iTunes streaming ... correct? If so, then it would be performing like any other wireless client (desktop, laptop, printer, etc.) and will not interfere with the D-Link's wireless network.
    I rechecked the AE and you are correct that the AE is set to join a wireless network.
    With having so many devices running on the wireless network, would it make sense to have a few device on each wireless system?(D-Link, TC, and AE)
    I know it sounds like overkill, but there is the possibility that all the devices could be running at once. I'm not sure if that would cause any conflicts.
    Is there any advantage to turning on the wireless on TC just for the iPhones for example or is it better to keep things as they are?(It works but is it efficient?)
    Please be aware I'm not fully knowledgeable with wireless routers and their capabilities.

  • Apple TV Dropping WiFi Connection with Home Sharing

    I am currently having trouble with my Apple TV and Home Sharing. My Apple TV will connect to my WiFI network (which is only 802.11g) and stream from either the iTunes store for movies, and from YouTube using that connection fine. My trouble starts when I try to connect to another computer with Home Sharing. When I try to connect to another computer (my MacBook Pro, for example, which is also on the same WiFi network) to stream content across the network, the Apple TV looses it's connection, and then the router kicks everything else on WiFi off the network. I am using WPA for WiFi security on the router. I turned off WPA, and everything streamed across the network fine, no drop outs on the Apple TV. I can stream from a desktop connected to the router via ethernet fine (with or without the WiFi security enabled). I think it is probably the router (it is just a little DLINK I picked up a little while back), but I wanted another opinion or some troubleshooting ideas before I do.

    I am having this problem too, I also have a dlink router. Everything works fine until I try using homeshare, after a minute or so I lose all wifi router connections on everything connected via wifi, iPad,iPhone and aptv2. I have to wait for the router to reset/restart to use again. It's very odd, it even happens if I connect the atv2 via Ethernet so it's not a wifi glitch.
    Any suggestions?

  • Apple TV 6.2 not connecting with home sharing to iTunes 11.3

    I have looked for any solutions to help reconnect the two for home sharing. When I click on "Computers" on the ATV, it says its loading my library. After "loading" it gives me the "Could not connect" error. My MBP and ATV are both connected to the same Airport Extreme but it wont connect to my library. I didn't have this problem with the previous ATV software.
    Any help is greatly welcome.

    Me too I have the same problem as MicheleP57!!!! What can I do???

  • Ipod touch shows connection with home computer but can't access internet

    Just got ipod touch...and can't connect to internet on home computer.  Wifi is on and it shows connection to my home computer but I can access the internet.

    What iP address is shown on the iPod for network connection?  If it starts with 169 you are not connected to the network, the 169 IP is assigned by the iPod and not obtained form the router.
    I would try:
    - powering off and then back on yur router.
    - Reseting network settings on the iPod: Settings>General>Reset>Reset Network Settings.
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • 770-c45 connect with Home Cinema via coaxial

    Hi there, I just bought a new computer with the 770-c45 motherboard in. I'm trying to connect it with my Home Cinema amplifier, via coaxial cable just like I already have my old computer. In the rear panel I put the mini jack in the black pin but I can't get any sound. My Home Cinema is Sony dav dz260 and it supports Dolby Digital 5+1.
    I installed the latest drivers for the motherboard but nothing seems to happen. When I connect the cable in the black pin, it recognizes it as an analogue connection. The cable is mini jack at the one end of the cable and at the other one RCA. Could you please help me

    Quote from: satyros on 04-September-09, 05:31:26
    c mon guys.
    THE MONEY IN THE ENVELOPE?
    And..? What wrong you see in this? Also as explained you will have to pay much less by that way.
    Also as they said they can make it by other ways if you prefer , but you have to pay more.
    They are not asking from you to put the money in a bottle and to drop it to a sea to travel to MSI by wave power.. :D
    Quote from: satyros on 04-September-09, 15:15:39
    The point is tha after that answer I don't trust them .
    Nice joke :D MSI is not gonna lie you or trying to steal your money

  • Ipad has lost connection with home wifi

    I have U-verse at home and now my ipad II has lost its wifi connection. I've tried "forgetting the network - no good. I've tried the reset and no luck there. Any ideas or suggestions - thanks.

    Lenchmob-
    Try unplugging the WiFi router for a few seconds.
    Fred

  • TS2972 Apple tv loses connection with home share

    Recently received an apple tv as a gift. I connect it to iTunes through home sharing but the connection is lost after only a few minutes.

    Well I firured it out, but dont know why it did this.  When I restarted my computer and then opened itunes back up.  Itunes changed the location of my media to the default location.  (I changed the location of my library to my external time machine since it was becomeing to large).  Again not sure why it decided to do this all of a sudden but that was the problem

  • IPhone 4 suddenly stopped connecting with home wireless network

    Upon getting a new wifi router, initially my iPhone 4 connected. Last night I lost wifi conneciton on it and cannot get it back. Updated to IOS 7.1 to see if it would help. Nothing. Have reset network setings, gone into airplane mode and attempted hard restart. Have also reset modem. The phone worked on another wireless network and all other devices in our house are working fine. Does anyone have any insights/ had this problem before? House network is Bell Fibe.
    The phone can see the wirless network but when we go to connect it infinetly spins.
    Thanks!!

    Hi garth_w,
    If you are having issues connecting to your home network from your iPhone after a change in routers, you may find the following article helpful:
    iOS: Troubleshooting Wi-Fi networks and connections
    https://support.apple.com/kb/TS1398
    Regards,
    - Brenden

  • Having trouble connecting with home wifi on my phone.  It's always connected very easily.

    Password is correct.  Phone "sees" the wifi, but not connecting.  I've disconnected, reconnected.  Turned phone off.  It says that the wifi is disabled.  All my other wifi devices are working ok.

    This is odd, katpolz! When did this start? Have you done any changes on your device or updates that might of caused this to happen? What make/model phone do you have? Are you able to connect this device to other WiFi's ?
    JorgeO_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Double IP-adr. and loosing connection with Home Share.

    I'm getting two IP-addresses for my Apple TV3, Why? (both WiFi & Cable ??) And I also loose connection to Homeshare/iTunes, have to restart iTunes every now and then. Also have a Apple TV2 in the network. When I only had Apple TV2 in the network I experienced none of these problems.

    I see them in the list in my router (list of connected device and their IP-adr). I have also named my device "Apple TV Upstairs" but when it getting more than one IP-adr the name in the router, wich also is displayed in Airplay from for example in iPhone, change to "Apple TV Upstairs (2)".

  • Home plug question

    Hello Guys
    I'm not very experienced with home plugs and have a pair set up and running that came with my vision box.
    My question is if i want to connect my PS3 via home plug/s do i need another pair or just the 1 plug?
    Best BT india advice i have seen yet on these forums:
    Q: Someone has hacked my wireless network
    A: Try plugging router into your test socket.

    iPHAILZ wrote:
    Great stuff, thanks for that.
    Just one final question, will i need to match it to the exisiting model i have or will any one do?
    As stated you just need 1 more plug.
    For ease of use/setup you would be better off getting a homeplug to match the ones you have.
    toekneem
    http://www.no2nuisancecalls.net
    (EASBF)

Maybe you are looking for