Connecting X-Fi Titanium PCIe to Inspire 5700 speakers - digital connection

I am considering purchasing an X-Fi Titanium PCIe card (or possibly, the X-Fi Titanium Fatalty Pro), and want to connect this to my existing speakers: Creative Inspire 5700 (5.).
The speakers currently connect to my Audigy 2 card via a single 3.5mm connector into the Digital Out socket on the sound card. Looking at the specifications of the X-Fi cards, I don't think they have such 3.5mm digital sockets. Can anyone confirm this, and tell me if/how I can connect my speakers?
Thanks,
Gary

OThanks, Juzam.
If I do this, will I still get true 5. surround sound? Will there be any difference between the way the speakers perform between using the optical connection and the 3.5mm digital one (via DIN)?
Thanks,
Gary

Similar Messages

X-Fi Fatal1ty & SB Inspire 5700 - no digital

I am having a big problem getting the X-Fi's digital out to work with my Creative Inspire 5. DIGITAL speakers. The speakers are OK as they respond to their own self test on their small remote which sends a sound to each of the 5 speakers & the sub-woofer in turn.
The X-Fi speaker setup will not show any more than 2. speakers in the digital mode. This is NOT CORRECT. If I proceed in digital speaker setup, I only get sound from the front 3 speakers!
This quote from Creative's known issues shows that the digital output from the X-Fi card should work in 5. using the multijack digital output!
QUOTE...........
4. KNOWN ISSUE
4. Creative Inspire 5. Digital 5700 and DeskTop Theater
DTT3500 Digital DIN Input
Only front speaker outputs may be audible when multichannel audio
signals are sent to Creative Inspire 5. Digital 5700 or DeskTop Theater
DTT3500 via Digital DIN. The speakers may be in their default 2-channel
mode. For multichannel speaker output, select the FourPoint/5. DIN
bypass mode on these speakers.
I assume the "bypass mode" means the "Fourpoint 5. DIN" position on the "Effects" switch on the Inspire's console.
I have set the X-Fi multijack to "digital output".
I have completely uninstalled all Creative drivers etc. Rebooted in "safe mode" and run Driver Cleaner Pro, to be sure! then done a clean install.
I cannot get the 5. speaker setup to work under Digital and am not at all a happy man!! The Audigy 2 that I had in before worked perfectly!
Using the analogue speaker outputs is NOT an option. The Inspire only has stereo ANALOGUE inputs and I want to use the analogue X-Fi outputs for the 3 jacks on my 5. earphones ..... without grovelling around behind the PC every time I change from speaker to phones!!
I had the analogue 5. phones and 5. digital speakers working perfectly in the Audigy 2 setup!
I seem to have spent ?45+ for a markedly inferior setup!!!

Just read through the post
X FI and No 5. DIGITAL surround out.
from this board sometime ago! 6 pages of furious people!
Why did my Audigy 2 work providing digital 5. sound out to the Inspire 5700 and the Xfi will not?
Even Creative's own known issues say 5. should be available from the multijack output!
As it stands the new card is an expensi've step backwards and is absolutely useless to me!
I am seriously thinking of demanding a refund on my Inspire digital speakers as well as the useless sound card!
Even my rotten old SB li've "5." worked with the Inspire 5700 speakers!

Connecting laptop to inspire 5700 decoder?

I've got the Creative Inspire 5700 5. product set up on my old desktop. Had that a few years. ?It's got 5 speakers, a sub and the decoder amp.
I'm wondering how I can connect my laptop up to it. The laptop is pretty basic and doesn't have an ExpressCard, but does have PCMIA slot.
Anyway looking at the current products I was wondering if th best option would be the X-fi Surround 5. - would I connect the digital outpt on that to the digital in on my Inspire decoder?
Any advice appreciated.

.....so having spent the day looking through the forums I've reached the conclusion that Creative have left everyone who invested in the 5700s high and dry and full functionality is not possible with?new products such as X-fi?and?they don't even have any?old external soundcards that would do what I want either.
There are a lot of posts on the?board with customers who have been let down in this way. If you had a product to enable continued use of the 5700s I would have purchased it, but you don't, and I'm not?splashing out on top of the line analog speakers.
so no sale...customer gone.

Logitech Z-5500 & X-Fi Titanium PCI-E Digital Connection ?

> Hi, my name is Ensar. I from Turkey.. English a little bad
I have a little problem we want help from you. Logitech Z-5500 speaker creative x-fi sound card with optical connection I want to do. Unfortunately but not sound. I want to use all the multi-channel audio as a feature in. original creative software installed ( Windiws 7 64 bit ) What should I do to make the setting of software for digital connection? I As we have seen in the picture below is the settings of..
? ( DTS & Dolby Digital & THX )
My computers feature :
Software :
Windows 7 64 bit
Power DVD 9
KM Player
Ac3 Filter
K-Lite Codec
Hardware :
X-fi titanium PCI-E sound card
Logitech Z-5500
Toslink Fiber Optic Cable
<img height="555[/img] src="http://img94.imageshack.us/img94/536/30843798.jpg" width="833">
<img height="579[/img] src="http://img262.imageshack.us/img262/5863/47543699.jpg" width="837">
<img height="529[/img] src="http://img0.imageshack.us/img0/244/78767379.jpg" width="46">
<img height="463[/img] src="http://img262.imageshack.us/img262/585/93804979.jpg" width="607">
<img height="460[/img] src="http://img87.imageshack.us/img87/8875/723875.jpg" width="605">?
<img height="460[/img] src="http://img69.imageshack.us/img69/2554/8540537.jpg" width="604">
<img height="462[/img] src="http://img704.imageshack.us/img704/9804/69755097.jpg" width="595">

B7 first of all iam using the same setup like u z5500 and xfi titanium champion? with optical cable .
so now first u have to enable the dts in encoder then u will get 5. sound from it and if that not working then use analog to test either ur optical cable is dead or speaker or maybe ur xfi ...

X-Fi Titanium PCI Express front pannel connection not working

<font face="verdana,geneva" size="3">I can not get any signal to or from the front pannel connector of my X-Fi Titanium PCI Express. (The rear jacks are working fine.)
<font face="verdana,geneva" size="3">The front header cable from my Antec P-80B worked perfectly with my onboard motherboard sound. Now that I have it connected to my X-Fi I get nothing from the jacks on the front of my case. (The onboard sound is disabled in my BIOS.)? I've double and tripple checked the connection and it is properly keyed and fitted. Is there a step or a setting that I'm missing somewhere to get this working? Can anyone confirm that the front pannel connection is acti've on the X-Fi Titanium PCI Express?

Re: X-Fi Titanium PCI Express front pannel connection not working? I was truly hoping that would help and I wanted to give you some additional hope. I have a coolermaster case, and it has the AC97 jack on the inside with all my other other front panel connectors for hard dri've activity light, reset, and power on. Three inches down from the AC97 jack, the INTEL HD *which works beautifully with the X-FI, only differs by three wires in different locations and the two pinouts configurations match those of the INTEL site identically.
Please tell me what happens as I would like to post a step by step guide for the others here in the forum. You will know when you have successfully adapted the connector because in VISTA and Windows 7, your sound applet in control panel will have a display of the connectors "lit up" when they are successfully connected. Mine shows FP microphone in the applet when its plugged in, and grayed out when its not. Its great for telling if I am connected on the rear of the soundcard of the front.
Best of luck and .......
Message Edited by jmacguire on 07-06-2009 :09 PM

Converting analog 5.1 (multiple cables) to Digital DIN (for Inspire 5700), how?

Hi,
So far I've been using my Inspire 5.1 Digital 5700 speaker system together with my Audigy Platinum in my Desktop PC to watch DVDs and play games with a 5.1 experience. To connect soundcard and Speaker system, I used the provided Digital DIN cable, and it worked fantastically, for both, DVDs and games.
Now I bought a notebook and the only choice to improve onboard sound was the X-Fi Xtreme Audio Notebook. I thought that I could simply connect it to my Inspire 5700 by connecting optical out with optical in using a TosLink-Mini -> Toslink cable. While this may work for DVDs (I don't have the cable yet), it won't work for all other applications, because as I read optical connections only provide a stereo signal unless the signal it'ss encoded via AC3 or DTS.
Of course there is the docking module which provides multichannel analog out. Trouble here: the Inspire 5700 only comes with two analog line in channels, front and rear. So that would lead to 4.0 instead of 5.1. Missing the center speaker for games is very bad.
Therefore I am looking for a way to convert the analog signal coming from the docking module into something that can be decoded as a 5.1 signal by the Inspire 5700. I have already found the DTS-610 which would turn the analog signal into a DTS signal. But that costs more than the soundcard itself.
So, my question: Is there any simpler / cheaper way how to transform multicable analog 5.1 to one-cable digital 5.1, either AC3, DTS or Digital DIN? I'd prefer a simple converter to Digital DIN, because that's what the Inspire 5700 was mainly designed for and it worked perfectly with my old Audigy.
Alternatively, one could possibly also use some fancy software to convert all the wave-out sound into AC3 or DTS and send it along the optical cable. But I don?t know any such software plus I expect this to drain a lot of processor power.
Any help is greatly appreciated it'ss kind of frustrating that two products of the same company can't be connected with each other, just because neither, the card nor the docking module provide Digital DIN.
Thank you very much and best regards
- spitfire
P.S. in another post, pjc said: You will probably require a 4-pole mini-jack > DIN converter to connect your Creative speakers to this socket.
That's exactly what I'm looking for, but I couldn't find such a converter on the creative homepage.

I believe the DIN for soundcard are mainly built and solely used by Creative. I don't think there is any 3rd-party converter in the market to do DIN. There is a software here posted by some other users that can do AC3 encoding on the fly. Not too sure where's the post now but you can do a search for it.

Titanium PCIe SB0880, analog 7.1 and upmix films 5.1- 7.1

I have:
- Creative X-Fi Titanium PCIe sb0880 (purchase march 2009),
- Drivers and software from Daniel_K last 3.0a version (08.25.2014),
- Acoustic system 7.1 with ampliefer (without audio processor, there no hardware mixing of MultiCH stereo and so on as reciever),
- Analog connection between the amplifier and soundcard (3.5" miniJack).
In theory, which works in Windows XP (or worked before, I used it until 2010) for my soundcard, upmix from 5.1 ac3-track to 7.1 (5.1 -> 7.1 with adding 2 sides virtual channels from mixing by X-Fi built-in decoder) must be as follows:
In my Windows 8.1 driver's Decoder tab is missing. I tried to install a different versions of the driver (Official and Daniel Kawakami) with complete cleaning system (with registry entries and ultimate uninstall) but in vain — desired options don't appear. I have found these support posts:
- No Decoder Option on Sound Card
- Suggested Setup to Perform Decoding with your Playstation 3
Then similar posts on this forum:
- Decoder tab missing with latest X-Fi driver
- X-Fi: Decoder tab missing?
There staits that now decoder option is not available in Titanium driver — use the Cyberlink PowerDVD soft. It really works (with software Cyberlink audio decoder in PowerDVD):
But how to use the Cyberlink decoder for other players? Or maybe there are other ways to get the same result with Dolby Pro Logic IIx software decoder or with enabling built-in Decoder tab in my driver?

Originally Posted by lagonauta
You can try installing K-Lite Codec Pack and then use LAV Audio or FFDShow to upmix your sound. I prefer FFDShow.
Thank you for your clever response. I've been using this set.
In Media Player Classic (K-Lite Codecs Pack) when playing a movie from a multichannel track there is activated ffdshow audio decoder (mixer 3/2/2 - 7 channels + LFE):
When playing a 5.1-tracks don't work 2 side speakers (Side ch.), the decoder shows the following information:
When playing a 7.1-track works all speakers, and the decoder shows, all working good:
Perhaps the only required setting Media Player Classic and ffdshow audio decoder, to achieve this. While I solved the problem by copying the sound signal from rear channels (Surround/Back) to the side speakers (Side ch.) by mixer in ffdshow. But this is only a temporary solution (russian language interface):
PS: Creative's CMSS3D and DTS Neo:PC just makes upmix 2.0->5.1/7.1 (very impressive!) but never 5.1->7.1...

Digital DIN cable !!! inspire 5700+audigy 2ZS

Hi,
i need help with my inspire 5700. i don't have a digital din cable (for digital connecting audigy + inspire). Support says that cable is not available. does anybody know where to get this cable (4pole digital jack to 9pole digital DIN) or how to make this cable?
Mic

I believe the DIN for soundcard are mainly built and solely used by Creative. I don't think there is any 3rd-party converter in the market to do DIN. There is a software here posted by some other users that can do AC3 encoding on the fly. Not too sure where's the post now but you can do a search for it.

Optimal configuration for inspire 5700

I juz bought a inspire 5700 and a audigy 2 ZS. Currently i am using the digital connection through the Digital Din input on the decoder from the Digital out of the soundcard. However, when i m playing mp3, only the centre and front speakers are working, the rear speakers are only playing some background music. When i m using the DTT 2200 speakers before this, all my 4 satellites are playing loud and clear. When i try to use analog connection (green and black) on my inspire 5700, no sound is coming out from the speaker. I wonder y. I already disable the digital out from the speaker setting. Is anyone using this speaker and can u advice me on how to configure the speakers and soundcard to achieve good quality sound? Thanx alot.

otarboy wrote:Ok i have tried setting the CMSS to stereo surround. However, i dun feel much difference from the CMSS2 or CMSS setting. The rear speakers are producing muffled sounds of the songs unlike the front speakers which are very clear in the singing. Also i tried to play mp3 songs using analog connection and the result is almost like digital output. When i was using the DTT 2200, all four speakers sounded equally clear since they are analog output but how come the analog output of Inspire 5700 is so different? I have already turn up the surround volume till 3/4 max and yet i cant feel the surround of music. So if i dun watch dvd on my pc, does that mean the Inspire 5700 is performing worse than my old DTT 2200?
Hey budd I use my CMSS3D settings too but I leave them set on stero surround and use InterVideo WinDVD6 Platinum Edition ver.B06.083 and don't use Creative Mediasource DVD-Audio Player ver..50.08 cause with that version sounds like there is static on the cd and complicating playback on the cd but thats a bug in creative software but to my knowlage anything in there previous ver. works well off but with InterVideo WinDVD6 PE software of mine they give me settings with it called audio booster pack and I can give my back speakers a Boost of +25 and I can hear well off then with that and does wanders on my DVD'S as well with DVD audio.
PowerDVD I don't like because of conflicts with creative drivers but I don't care for that cause InterVideo software is much better IMO
P.S. you don't have to worry about changing the settings in CMSS3D after you set it to stereo surround because DVD software has no affects with that CMSS3D or atleast to my ears they don't but you could have super sonic ears too hehe... but the settings do take affect in reguler Windows Media Player and Creative Mediasource and other media players out there
Also for your digital audio yes it must be recorded in 3D audio or it will not work right and with analog it would just upmix it unless you want to try on your digital to upmix it by the remote on the speaker settings of yours hardware wise and see if that don't help?
but also digital helps RIAA out in copyright protection of course there are ways around that too but I am not pramoting anything illegal so I will leave that subject alone for you all thinkers out there
after listening to the included dvd-audio disk that comes with Creative Soundblaster audigy2 zs gamer LE card through InterVideo WinDVD6 Platinum ED you can tell a kickass diffrence I mean it's the type that gives ya goosebumps cause you love hearing waht you hear coming from your speakers hehe..... at least try the demo and if ya love the demo get with me at [email protected] and I may share ya a full retail version for just being a helpfull person that I am
Good Luck both ways buddy give it a try you will love it
Message Edited by RLemmon on 12-30-2004 07:59 AM

Replacement for Inspire 5700 + Creative Audigy Platinum

Hi,
for many years I have been using a combination of a Creative Audigy Platinum soundcard with a Creative Inspire 5.1 Digital 5700 speaker system. I am very pleased with the quality, compatibility and easy-to-useness of this system. For games and music, I let the soundcard do the decoding and send the bits via digital connection to the Inspire system, which I set to 5.1 DIN. For DVDs, I send everything via SPDIF and let the Inspire do the decoding, either DTS or Dolby digital. Works just perfectly.
Only problem: if everything works according to the plan, I will move from Europe to the States in two months and stay there for - 3 years. Because desktop computers and probably also my Inspire 5700 system are quite tricky to ship, I decided to buy a laptop here and buy another speaker system by creative after I have a arrived in the states. Full of anticipation I checked this site to choose my future system and ... was struck by shock:
I couldn't find any system which offered the same features as the Digital 5700! All modern systems lack digital input, leave alone an external decoder and have primitive wire-remotes instead of real remotes! Why has this kind of great system disappeared? Of course you cannot buy the good old 5700 anymore, which leaves me with a great problem of how to organize a system which offers similar quality and features.
I originally planned to connect my laptop (ASUS A8JS) via S/PDIF to the new inspire 5.1 speaker set, which would then do the job of decoding digital audiostreams coming from DVDs. But well, since the new Inspire sets neither support S/PDIF nor offer external decoding, that idea has been flushed down the toilet
What do you recommend instead? I guess I will need a USB Sound Blaster in combo with an inspire speaker set. What will provide the same quality to what I had? What are the drawbacks of not having digital connections any more? How can I control sound levels of the subwoofer, center and rearspeakers, if there is no external decoder anymore? Only via software?
Thank you very much for any advice!
- spitfire

Thank you very much for your helpful replies! Future looks much brighter now
Where have you found the Audigy 2 NX? On their webpage, creative only list the USB Sound Blaster Audigy 2 ZS Video Editor or the Sound Blaster Live! 24-bit External as USB-solutions. Since I don't need the video editing capability, the Audigy 2 ZS would probably be quite an overkill. Still, the price difference between Audigy ($250) and Life! ($50) is ... drastic! Besides the video stuff and some connections, what else is the Life! solution missing? Does it have poor quality? Is there no real 3D sound, just some kind of upmixing? It's not very clear from the specifications.
The Logitech Z-5500 Digital looks very promising, too. A consequent improvement of the Inspire D-5700, just by the competition I may go for that one, but probably still need an external soundcard for 3D-sound in games.
I am not exactly an expert considering connections. So, my laptop will already have digital S/PDIF built into the headphone plug. Just from the look, I'd say this is the same kind of plug which is called "Analog/Digital-Out" on my old Audigy sound card. Now, the logitech system supports digital optical or digital coaxial as source input. Will this work with the S/PDIF headphone out, or would it require the DIN connection you mentionned? Could this be easily solved by buying an adaptor?
Looking at the picture showing the connections of the SB Life! I again am not clear at all what kind of connections there are (http://us.creative.com/products/prod...Specifications ). Is there anything compatible with the Logitech system? I guess it's no question the Audigy2 ZS is equipped with the required connections.
So, to summarize my question: could I digitally connect either my laptop or the SB Live! 24-bit external with the Logitech Z-5500, so that the latter would take care of decoding Dolby Digital and DTS sound, while the sound blaster would provide EAX and 3D sound for games?
I have also seen that Creative Labs still offers an external decoder with a lot of connection possibilities. It's just no longer part of a speaker system, but rather a standalone product: the Creative Decoder DDTS-100 for $30. Together with a good speaker system, this may be an alternative to the logitech solution, in terms of enabling to plug in other devices than just a computer (another thing I really loved about my old system).
Well, again thank you very much for your advice!
- spitfire

How to connect SB X-FI XTREME MUSIC with Creative Inspire 5.1 Digital 5

Hi,
I want to know what I have to do to connect my x-fi xtreme music with my creative inspire 5. digital 5700 due to listen music with all? 5 twiters. I have windows vista ultimate 32bits. Thanks!?JoanMessage Edited by joanantoni on 07-9-200703:54 AM

With your Inspire 5. Digital 5700, your best bet is?using the analog Front and Rear input connections on the decoder and connect them to the X-Fi Xtreme Music front (Line Out )?and rear (Line?Out 2)?output connections and then enable CMSS Music or CMSS Movie Mode on your Digital 5700 decoder which will then give you a 4./5. Upmix. Gi'ven that you don't have a Center connection on the the Inspire 5. Digital 5700, no connection can made to the your Front Center satelite speaker/Subwoofer (Line Out 3) on your X-Fi Xtreme Music card. I'm led to understand that Creative speaker systems do not need Bass Redirection to reproduce proper Bass frequencies on your Subwoofer and not on your satelite speakers but you may want to test this simply enabling and disabling Bass Redirection, on your X-Fi Xtreme Music sound card, to your own personal taste. Alternately, you can concurrently connect your Inspire 5. Digital 5700 via the Coxial Digital/PCM Input to the FlexiJack input/output jack on the X-Fi Xtreme Music and then enable Digital I/O mode for the FlexiJack in the Audio Console found in the Windows Control Panel or?in the Entertainment Mode or Game Mode Consoles. Unfortunately the FlexiJack only provides a 2 conductor connection therefore it only supports 2. Speaker system connections?therefore you will still have to enable the CMSS Music or CMSS Movie Modes on your Inspire 5. Digital 5700 decoder to produce a 4./5. sound upmix. Sadly, no optical connection can be made between your Inspire 5. Digital 5700 and your X-Fi Xtreme Music sound card without the installation of the X-Fi I/O Dri've or X-Fi I/O Console at, of course, additional expense. From my standpoint, the X-Fi I/O Dri've is a good value given the number of external inputs and outputs in offers. Again, it's a matter of what your personal connection requirements are and budget. Hope this hel
ps.

Creative Inspire 5700 VS Realtek. SUB NOT WORKING :(

Dear all
I recently beefed up my PC - tried to run my lovely Inspire 5700 through optical on my new Gigabyte motherboard, which didn't work (only got stereo sound) so i tried analoge (which only gave me a 5 speaker sound, no bass). I have tried messing around with the realtek dashboard but I can't get it to work!!
How can I get my bass to work and get a full 5.1 surround sound using the two analogue pins and a realtek software?
Best Regards

D'oh! Well, that explains it. I should like to point out that it is a bit confusing for buyers to introduce a cable standard (nobody else in the business uses that kind auf Digital DIN connection, AFAIK) and then using it for something else altogether. The DIN connection was one of the reasons I chose the Sound Blaster over a competing product. I must say that I'm a bit diappointed since even the Users Guide I downloaded (to make sure I got the right product) states that the DIN socket is used for "connecting digital in-/outputs of multichannel speaker systems".
All in all, it still bugs me that I won't get 5. on my 5700 except for the obvious Dolby Digital pass-through. Any way this might be done via a software update? Maybe somehow integrating a Dolby Digital encoder so I could use the Coax or Optical Out?
Regards,
JoergMessage Edited by Joerg_McFly on 08-25-2006 :52 AM

Going mad with my Audigy2zs+Inspire 5700

?Hello,
after going through all the available manuals/support websites/board topics, etc. I finally decided to create an account and post my question, as I am reaching dangerous levels of exasperation. One may assume that two digital products from one brand should be entirely compatible and should work together easily. Sadly, this is not the case with these two.
The thing is, that I have tried multiple solutions to get all my speakers to produce sound of decent quality. Currently I have connected the Inspire set with Audigy using two jack cables and one digital-coaxial cable. This is the best I've achieved yet, i.e. I get sound from all the speakers apart from the center one.
Is there any chance I can get it to work properly WITHOUT buying the mysterious 9-pin mini-din cable, which is by no means available to buy anywhere in my country (Poland)?, nor in the UK (where I study) or anywhere else I've tried.
Any help would be appreciated. Thanks.

Please try the following instructions to test your Inspire 5700, this should tell you if the speakers system is working properly.
1. Disconnect the audio cable connected to the Front analog input on the back of the decoder.
2. Connect an audio device like an mp3 player to the Front analog input, you will need a 3.5mm to 3.5mm cable for this.
3. Select CMSS movie or CMSS music on the decoder and play a music track on the mp3 player.
You should get sound from your center speakers. If you are not getting sound, you probably need to check the connections.

Clicks and Pops with X-fi Titanium PCIe

I am having trouble with my X-fi Titanium PCIe where I am getting clicks and pops every so often. The problem is during any audio, music, movies, netflix etc. I am connected thru optical spdif and I have tried with Dolby Digital Live both on and off, and the clicks are always there.
I checked IRQs and the X-fi is sharing IRQ 16 with my video card and a couple other devices. My thinking is that this is the problem, but of course in Windows 7, there is no way to force an IRQ change. My board only has one PCIe x1 slot and I'm not sure what else to do.
I would appreciate any help or input.

Hi MuzicEngineer,
Certain motherboards may allow you to reassign the IRQ of your devices. You might want to check with the motherboard vendor to see if this is possible. Also if you have not already, feel free to write to our Customer Support for assistance.

X-Fi Titanium PCI-E and the front panel from my case

The plug from my frontpanel fit onto the soundcard, but when I plug in a headset I can't hear anything. I can hear sound on the left side of my headset when I plug it in only half the way.
My Case: Tronje H-650B
What makes me thinking is the fact that I can hear sound, but only on the left side of my headset and only when the plug is only the half way in.
Hope you can help me to solve the problem.
Greetings.

Re: X-Fi Titanium PCI-E and the front panel from my casev I tried hooking up the HD Audio front connecto of my Lian-Li A05 to the X-Fi Titanium. However, the headset is not detected (neither in nor out). Looking at the pinout I noticed that my connector has the correct pins for the signal, but lacks the following wires (completely missing):
<div class="pCellBody">4 PRESENCE#? Acti've low signal that signals BIOS that an Intel HD Audio dongle is connected to the analog header. PRESENCE# = 0 when an Intel HD Audio dongle is connected<div class="pCellBody">7 SENSE_SEND? Jack detection sense line from the Intel HD Audio CODEC jack detection resistor network
I take it these are required to make the card detect the devices. Is there a way to circumvent this?
Also, the manual gives a confusing description:
"Intel HD Front Panel Audio standard only.
Not compatible with AC97 or Intel-compatible HD Front Panel Audio"
So it is compliant with Intel, but also not compatible with Intel? Or is there a difference between "Intel" and "Intel-compatible"? This makes no sense...

Connecting X-Fi Titanium PCIe to Inspire 5700 speakers - digital connection

Similar Messages

Maybe you are looking for