Connecting your video iPod to the tv.

Is there a way to connect the video iPod to the tv?

Page 37 - Watching Videos on a TV Connected to iPod
http://manuals.info.apple.com/en/iPodFeaturesGuide.pdf

Similar Messages

I've got a 7 year old 30gb video ipod and the headphone port no longer works! Please help :)

I've got a 7 year old 30gb video ipod and the headphone port no longer works.
I went to the Apple shop and they said it is now vintage and they can't fix my baby they offered me 10% to trade her in for a new model...
what else can I try to save her? I've tried cleaning and wiggling and restoring. Everything looks and feels ok.

I've just found 'iPod Dock Connector Headphone Jack' on ebay it as an adapter that will connect my earphones via the wide ipod port better than 10% of something new

WWHEN I CONNECT MY VIDEO CAMERA TO THE MAC, IMOVIE DOES NOT RECONIZE IT SO IT GOES STRAIGHT TO DVD PLAYER. I AM TRYING TO DOWNLOAD VIDEO IN IMOVIE. SOME OF THE DISC WILL GO TO IMOVIE OTHERS STRAIGHT TO DVD PLAYER

When I connect my video camera to the mini mac in order to download into imovie it goes directly to dvd player and I can't download into imovie. It does not reconize a camera being connected. This does not happen all the time. Is something wrong with the disc or the camera???

It sounds like it is mistaking the camera for a DVD disk. So my best follow-up question is to ask:
1. Who is the manufaturer of your camera
2. What is the model number of this camera.
What happens when you quit DVD player. Does iMovie still fail?

How do you get rid of this pop up message: You are currently browsing the web with and it is recommended that you update your video player to the fastest version available. Please update to continue.

I am getting this pop up message: You are currently browsing the web with and it is recommended that you update your video player to the fastest version available. Please update to continue.
How do I get rid of it? I have tried searching the web and I have only seen solutions for chrome and firefox. Thanks.

the link to the page is below
http://www.viesio9q58.com/41612C472C746D6E5047462D522B3A499CE6BD0593A068E7860909 6F792C3C69D19ECDCE71575FC8DABD23D1A0E21C93?PubID=79_3527_3100&tgu_src_lp_domain= www.newallsoft.com&ClickID=7649753723

What happens when u drop your video ipod in to the water

I would really apreciated if someone can help me with this problem i accidently drop my video ipod in to a bucket of water and now it would not work.

Welcome to Apple Discussions!
Leave it alone for a week to dry. Don't try to turn it on or charge it.
After a week, try the steps listed here...
Your iPod Does Not Turn On
If it still doesn't work, you may need to have your iPod fixed by a company like this (as you voided the warranty)...
iPodResQ
btabz

Error message when connecting 80GB Video iPod

I'm getting this error message when trying to connect my 80GB Video iPod:
"The iPod (name) cannot be synced. An unknown error occurred (-48)."
Never seen this one before.
I haven't synced this iPod for a few weeks but it always behaved fine before, taking a few seconds to appear in iTunes (v7.5) then syncing perfectly when I hit the Sync button (I have it set to manually sync only because sometimes I want to change the contents or only sync music).
Before syncing on this occasion, I did an iPod software update via iTunes - iTunes said there was a newer version (1.2.3). After the update, I disconnected the iPod for a few minutes (somehting I wanted to check content before syncing), then reconnected it. At first iPod took about a minute to show up in iTunes - way too long. I Reset the iPod and tried again but still LONG delay to appear in iTunes (again about 1 minute). I did another Reset - same result. Then I did a complete Restore, after which syncing to restore the contents gave problems - it refused to finish the sync. I had to disconnect and start again, syncing the data one section per sync session - Contacts, music, videos, iCal - which seemed to work fine. Then I disconnected, waited a few minutes then reconnected the iPod to check. It wouldn't connect at all. Did a Reset, tried o connect again and it did connect but then proceeded to resync all my contacts taking almost 30 minutes (way too long) to do so (I had made NO changes in Address Book since that data was put in there). I tried to reconnect again but then got the error message (above). Did another total Restore and the same shenannigans happened. Now, I have an iPod with data on it and works fine, but iTunes won't recognise it - just gives this error message every time.
By the way, my 8GB Nano (software 1.1.3) seems to sync fine on the same system, same computer.
Could this be the 1.2.3 iPod software giving issues? I appreciate any help because I also use this iPod for recording for my work, which getting a little urgent now.
Many thanks.

Thanks Zevoneer, but no real success. I did all that but when I tried to sync after it, it got partially through the sync (about 10% I'd guess) and presented an error message saying that the disk couldn't be read form or written to (sorry but I forgot the error number). I disconnected the iPod, waited a few minutes then reconnected and again got the message but then the ipod continued to finish the sync, even though almost all of the music and 2 of my 4 videos didn't go over to the iPod. I'm now thinking that this just isn't satisfactory reliability from the device since I use it a lot in my work and rely on it. But this new iPod is only a few months old, had very little use and only made about 12 recordings - In comparison, I've used the Nano heaps but now want to move over to the bigger one, basically for more capacity and bigger screen for video. I wonder if it's a hard drive failure in this iPod?
null

When I connect my new Ipod to the computer it freezes and I must wait a long time. What should I do?

My Ipod freezes when I connect it to the laptop. Then I cannot do anything with it for a long time. Can you help me with this?

Check your iPod with Diagnostics Mode
It's possible that your iPod's hard drive has started to fail. Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for Manual Test, then select IO > HardDrive > HDSMARTData to reveal your stats. For comparison here are mine taken when my 6th Generation Classic was about 2 years old:
Retracts: 889
Reallocs: 12
Pending Sectors: 0
PowerOn Hours: 2202
Start/Stops: 894
Temp: Current 24c
Temp: Min 10c
Temp: Max 50c
Take a note of your results. When finished press SELECT & MENU for 6 seconds to reset the iPod again.
With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
Reallocated Sectors Count
Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
Pending sector count
Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
tt2

Using the video iPod with the Bose SoundDock

I just purchased the new video iPod and Bose SoundDock, I noticed that I can't fast forward through MP3s when using the SoundDock remote, anyone else notice this? Downloaded the latest updates from Apple's website, didn't help...
drakemallard

Hey,
I had exactly the same problem and updated both my iTunes software and my iPod Software (downloaded the latest iPod updater) and the problem has been fixed. My iPod video is now running software version 1.1 and I can fasst forward and rewind using the Bose remote with no problems now!
I loved the SoundDock before, but now it just feels all that more complete. Hope it helps.

Connecting 80G video IPOD to Pioneer Elite receiver

When I connect my IPOD to Pioneer Elite receiver using the Pioneer supplied cable, I get a message on the IPOD display showing the Pioneer logo and OK TO DISCONECT! I tried setting the video out to ON but still no luck. Anybody got any clues?
Thanks,
T
SuperFly Windows XP
SuperFly Windows XP

You need to read your Pioneer manual carefully. Check for HDMI passthrough settings, assuming your receiver functions as a HDMi switch. This is definitely a configuration issue with your receiver, not the Apple TV. A receiver typically works by having multiple HDMI inputs for various components like cable or satellite boxes, Blu-ray player, AppleTV, etc., and a single output port to the HDTV that will be the display. There is also some little amount of signal loss as it passes through the receiver and the length of the cables may come into play.

My sister wants to connect her new ipod to the computer that my nano is on.

K my sister just got a new ipod shuffle and wants to connect it to the computer. my nano is already connected to the same computer she wants to use.
How do i put it on the computer without messing up my itunes?
Please help if you can

iTunes will recognize that it is a different device. However, if you're worried that your sister is going to rate songs differently than you would like, well that's different. See if this article offers any guidance:
http://docs.info.apple.com/article.html?artnum=300432

HT1695 Is there a cable that can connect 5th gen Ipod to the internet?

Wifi dlink just quit. Is there any other way to connect Ipod touch to the internet? Thanks.

Yes it is. And I also agree with you regarding Netgear, which I've used extensively outside of work and prefer them over dLink. I'd rate Linksys under both.
If the OP has a pretty simple network I'd still go with the Apple Express as it also gives them AirPlay capabilities.
So I guess my view is as good as yours.

Anyone having trouble connecting your iPhone 5 to the Big Blue Live Speaker?

I have an old iPod touch. I've been using the Big Blue Live speaker a bluetooth connected device. Never a problem.
I am now trying to connect it to my iPhone5, which I upgraded to ios8. It does not want to pair. It is not recognizing the Big Blue Live.
Anyone know what the problem could be?
Thank you

I was finally able to pair my big blue with an iphone 6.
I used this to help me.
http://video.brookstone.com/v/1780247279/auto-dim1-734327p-mp4-stereos-electroni cs-radios-speakers/

How to connect your hdmi tv to the Thunderbolt display?

Hello,
I've just got my Thunderbotl display which is really nice, but i have question and i hope this would be possible.
How to connect an external display, in my case the HDMI tv to the thunderbolt display?
The connection would looks something like this:
Macbookpro (late 2011 15') -> Thunderbolt cable -> Thunderbolt display -> Thunderbolt to hdmi adapter -> HDMI Display
But currently i cannot get any screen on my hdmi display (it remeans black).
p.s. runing latest version of OS X
Thanks

<http://support.apple.com/kb/HT5219>
See secrions 14 and 16.
If your MacBook Pro does support two external displays you may be able to use your TV with a Thunderbolt display. While a Mini DisplayPort adapter won't work plugged directly into a Thunderbolt display, it will work if a Thunderbolt drive is connected between the displays. This reportedly works with Seagate GoFlex drives. LaCie drives don't work plugged into Thunderbolt displays.

Can you print from a printer by connecting your USB cable to the printer

Can you print from your iPad to a network printer using the USB cable?

No.
The only way to print from an iOS device is to have an AirPrint-compatible printer on the same network that your iOS device connects to for WiFi.

How do you connect your remote Application to the Apple TV?

can someone teach me how to do it I am confused

Hello Maxie15
All you should have to do is be connected to the same Network as your ATV. When you launch the Remote App, it should ask if you want to approve it to another library or set up family sharing. If you set up family sharing you enter you same iCloud information. And Voila. That is the easiest.
Check out this link. It will give you all you need.
http://support.apple.com/kb/HT1947?viewlocale=en_US&locale=en_US

Connecting your video iPod to the tv.

Similar Messages

Maybe you are looking for