Connecting ZOS DB2 from SQLDeveloper

Hi Friends,
I am trying to connect Z O/S DB2 from Oracle sql developer.
I already installed DB2 in my windows machine and i can configure the catalog of Z O/S database. I can connect Z O/S DB2 from my windows machine DB2.
Then i installed SQLDEVELPOER 3.0.04.34 registered the following jar file from windows DB2.
db2jcc.jar and db2jcc_license_cu.jar (Location :- ****\SQLLIB\java). Then i try to connect the Z 0/S DB2 database. While i try to connect, it show the below error.
An error was encountered performing the requested operation:
[jcc][t4][10509][13454][3.62.56] Connection to the data server failed. The IBM Data Server for JDBC and SQLJ license was invalid or was not activated for the DB2 for Z/OS subsystem.if you are connecting directly to the data server and using DB2 connect unlimited Edition for System z, perform the activation step by running the activation program in the license activation kit.
If you are using aother edition of DB2 Connect,obtain the license file, db2jcc_license_cisuz.jar, from the license activation kit, and follow the installation directions to include the license file in the class path
Thanks in advance.
Please help to solve this problem.
I think i need to download and register db2jcc_license_cisuz.jar. Where i can dowload?
Note:- JDBC connection was enabled in Z O/S DB2.
Edited by: user8665771 on Oct 13, 2011 12:22 AM

1008611 wrote:
I know this is an old issue, but for future reference I would like to contribute with my 2 cents...
I'm not entirely sure, but I think that Oracle SQL Developer don't support DB2 z/OS at it's current state, only DB2 LUW (Linux, Unix and Windows).
I am in the same situation and I am very sure that I'm using properly licensed files.
If this is true, the issue might very well be Oracle related.
Can anyone confirm this, please?If it is an "oracle" issue, it would only be so far as what non-oracle databases can be supported by Oracle SQL Developer. And so would best be addressed in the dedicated SQL Developer forum: SQL Developer

Similar Messages

How would I connect to DB2 thru sqldeveloper version 3.1?

Hello:
has anyone successfully connected to DB2 thru sqldeveloper version 3.1?....I have downloaded the IBM DB2client: the db2jcc.jar and db2jcc_license_cu.jar files and am able to successfully connect to DB2 via an ODBC connection (thru the windows-control-panel)....however when I try to connect thru sqldeveloper, I get the following error:
"Status : Failure -Test failed: The version of the IBM Universal JDBC driver in use is not licensed for connectivity to z/OS databases. To connect to this DB2 server, please obtain a licensed copy of the IBM DB2 Universal Driver for JDBC and SQLJ. An appropriate license file db2jcc_license_*.jar for this target platform must be installed to the application classpath. Connectivity to z/OS databases is enabled by any of the following license files: { db2jcc_license_cisuz.jar }"
what is puzzling is that ODBC connection thru the contro-panel, admin tools-data sources(ODBC),file-dsn works fine and no licensing issue with the DB2client downloaded and installed (i.e. db2jcc.jar).....any solutions will be appreciated....

From what you posted, I'm guessing you don't have the correct licence file (db2jcc_license_cu.jar v db2jcc_license_cisuz.jar ).
I don't think DB2 on z/Os is fully supported by SQL Developer.

Connecting to db2 from report builder via odbc

Hi!
Some manuals said, it is possible to connect to DB2 from Oracle SQL*Plus (we have version 8.0.6.0.0)
and from Oracle Report Builder.(6.0.8.11.3)
User must install OCA (Oracle Open Client Adapter for ODBC (6.0.5.29.0)) and make ODBC entry.
I did it.
run with: plus80 db2user/db2pass@odbc:db2test
SQL*Plus made the connection, but with errors:
SQL*Plus: Release 8.0.6.0.0 - Production on Fri Oct 17 16:12:56 2003
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ORA-00022: invalid session id; access denied
ORA-00022: invalid session id; access denied
ORA-00022: invalid session id; access denied
Error accessing PRODUCT_USER_PROFILE
Warning: Product user profile information not loaded!
You may need to run PUPBLD.SQL as SYSTEM
Server not available or version too low for this feature
ORA-00022: invalid session id; access denied
Connected to:
Oracle Open Client Adapter for ODBC 6.0.5.29.0
DB2/NT 08.01.0000
SQL>
The error refers PUPBLD.SQL, but I think it is Oracle specific, don't help.
Worse, that it can't connect from Report Builder, it just throws error.
If I set OCA_DEBUG=TRUE in registry, I have bonus messages:
oca-30053 unsupported network call (oracle code: 3115)
oca-30002 ubofssw function not supported (1010)
I tried to connect to MsAcces too, but I got same errors.
Have you any idea, how can I solve this?
Thanks

resolved
I just add the master entry in the c:\Report\NET80\ADMIN\tnsnames.ora, and it works.
but I can't connect with the system or sys accounts, it work just with scott/tiger.

Problem with connecting to DB2 from ADFBC

I have a problem with connection to DB2 data using ADF BC components. Everything looks fine till I run the page(JSF) to see the data of a db2 table. I created a read only view object. This view is registered in the AM and from AM the view is returning the rows without any problem. But when I am running the page which has the view as a table these errors are thrown. Please help me to fix this.
JBO-30003: The application pool (od.mft.views.MFTServiceLocal) failed to checkout an application module due to the following exception:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
at oracle.jbo.pool.ResourcePool.useResource(ResourcePool.java:336)
## Detail 0 ##
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
## Detail 0 ##
oracle.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:220
## Detail 0 ##
java.sql.SQLException: No suitable driver
at java.sql.DriverManager.getConnection(DriverManager.java:545)
Thanks
Gangs

Steve, the tester works good as expected and its retreiving the rows. As I said earlier the problem is with the JSF page when I ran the page on Embeded Oc4j of Jdev the page showing the above. The exception does not show on the console.
Please let me know if you need any more details.
thanks
Gangs

How to connect to DB2 from ABAP program

Hi,
In my ABAP program I need to retrieve 3 fields from one table of DB2 database. I have tried creating an RFC connection in SM59 and then using native SQL in abap code but could not succeed.
I have also maintained an entry in DBCON table but am unable to connect through program.
Pls suggest.
Thanx in advance.

Preeti-
DBCON may not work for you because your target is DB2. You SAP system should have the suitable driver files for connecting to DB2 and I don't think currently this is supported.
However, there are other ways of doing it. One ofcourse is to use a middleware tool, which I guess you don't have in your landscape.
If investing on a middleware tool is out of scope, here are other options
1) If you are a microsoft shop, use .NET connector (freely downlaodable from SAP service market place). You can develop a .NET component which will use .NET connector for connecting to SAP and OBDC to connect to your AS400 system. The OBDC drivers can be obtained from IBM.
2) If you are a java shop, you can develop a java code which can run on your AS400 system or a separte server (windows,unix..).
This java code will use JRFC/JCO (again downloadable for free from SAP service market place) to connect to SAP while it will use Client access ODBC drivers or JT400 drivers (google JT400) to connect to your DB2 database.
Though developing this is not a great deal, could be bit challenging if done for the first time. Let me know which way you wanna go and I can guide with more information/code samples.
KK

Connect to DB2 from oracle 11g on windows 2008 server

Hi Folks,
I want to conenct to DB2 from oracle 11g using DB link.
DB2 :
user : db2user
pwd : db2pwd
database : db2database (OSBLDEV)
able to connect to db2 server (installed on machine M1) using db2 client with above details from machine M2 (where oracle is installed).
Oracle :
user : orauser
pwd : orapwd
host : orahost
port : 1521
service : oraservice
able to connect to oracle server using oracle sql developer with above details on Machine M2 (windows 2008 server)
when i execute the query with database link
select row_id from siebel.s_org_ext@OSBLDEV;
I get the message : ORA-12154: TNS:could not resolve the connect identifier specified.
could you pls check and let me know whether the below enteries are correct or not.
Pls share if you have step by step connectivity from DB2 to oracle using DB link.
1. I have created the Data source for DB2 - test successful
create database link OSBLDEV
connect to "db2user"
identified by "ldb2pwd"
using 'OSBLDEV';
1. I have made the following entry in E:\oracle\product\11.1.0\db_1\hs\admin\initosbldev.ora
HS_FDS_CONNECT_INFO = OSBLDEV
HS_FDS_TRACE_LEVEL = 0
2. I have made the following entry in E:\oracle\product\11.1.0\db_1\NETWORK\ADMIN\tnsnames.ora
OSBLDEV =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orahost)(PORT=1521))
(CONNECT_DATA=(SID=OSBLDEV))
(HS=OK)
3. I have made the following entry in E:\oracle\product\11.1.0\db_1\NETWORK\ADMIN\listener.ora and releoaded the listner (lsnrctl reload)
LISTENER =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=orahost)(PORT=1521))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
SID_LIST_LISTENER=
(SID_LIST=
     (SID_DESC = # this is the entry for HSODBC
     (SID_NAME = OSBLDEV)
     (ORACLE_HOME = e:\oracle\product\11.1.0\db_1)
     (PROGRAM = hsodbc)
Thanks in advance.

1. My listener.ora is placed at the below location:
E:\oracle\product\11.1.0\db_1\NETWORK\ADMIN
2. I have modifed the listener and removed the entry - hsodbc
3. stop and start the listener.
still can't see the service entry in listener status.
C:\>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.1.0.7.0 - Production on 19-JUL-2010 02:27
:08
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.1.0.7.0 - Produ
ction
Start Date 19-JUL-2010 02:21:17
Uptime 0 days 0 hr. 5 min. 52 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File e:\oracle\diag\tnslsnr\DALDEVDBCRM1\listener\alert\log
.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=daldevdbcrm1.corp.nai.org)(PORT=1521
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm1", status READY, has 1 handler(s) for this service...
Service "+ASM_XPT" has 1 instance(s).
Instance "+asm1", status READY, has 1 handler(s) for this service...
Service "ARIBADEV" has 1 instance(s).
Instance "ariba", status READY, has 1 handler(s) for this service...
Service "ARIBADEV_XPT" has 1 instance(s).
Instance "ariba", status READY, has 1 handler(s) for this service...
Service "ARIBAXDB" has 1 instance(s).
Instance "ariba", status READY, has 1 handler(s) for this service...
Service "aiad.corp.nai.org" has 2 instance(s).
Instance "aiad1", status READY, has 2 handler(s) for this service...
Instance "aiad2", status READY, has 1 handler(s) for this service...
Service "aiadXDB.corp.nai.org" has 2 instance(s).
Instance "aiad1", status READY, has 1 handler(s) for this service...
Instance "aiad2", status READY, has 1 handler(s) for this service...
Service "aiad_XPT.corp.nai.org" has 2 instance(s).
Instance "aiad1", status READY, has 2 handler(s) for this service...
Instance "aiad2", status READY, has 1 handler(s) for this service...
Service "aianew" has 1 instance(s).
Instance "aianew", status READY, has 1 handler(s) for this service...
Service "aianewXDB" has 1 instance(s).
Instance "aianew", status READY, has 1 handler(s) for this service...
Service "aianew_XPT" has 1 instance(s).
Instance "aianew", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\>

Oracle 8i connectivity with DB2

Hi,
I want to connect to DB2 from Oracle 8i. I have read some documentation about Oracle gateways but it is not clear of how exactly we can connect to DB2.
If any one has done this before please let me know th detail steps of how we can connect to DB2.

For your kind information (more)
When I used JDBC-ODBC Bridge,
It just gave an error message : [Microsoft ODBC for Oracle]
and
when I tried the command at DOS prompt,
javap oracle.jdbc.driver.OracleDriver
it gave message ERROR: javap oracle.jdbc.driver.OracleDriver could not be found
Please Help me
Hara Gopal

Error while connecting to DB2 7.2 from a servlet

Hello!
I am trying to access DB2 from a Java servlet. This causes an error -
"The instruction at 0x0040b9f8 referenced memory at 0x00000001. The memory could not be read." and
"COM.ibm.db2.jdbc.net.DB2Exception: [IBM][JDBC Driver] CLI0617E Error closing socket. SQLSTATE=08S01"
But I am able to connect successfully from a command-line Java program.
Any ideas?
Thanks.
Deepa

I had installed DB2 under the Program Files folder (C:\Program Files\SQLLIB). The space in the name was causing the problem.
I re-installed DB2(C:\SQLLIB) and this fixed it.

Connecting db2 from oracle

hi,
i)what is the cwbcfg program to be executed you have mentioned.
ii) I executed caths.sql
iii) In tnsnames.ora how to specify the dsn that you create for db2 database.
for example if I have created a dsn for db2 naming it kishore_dsn, how do i specify that in tnsnames.ora file.
and by what sid is the iniths_sid.ora to be created. is it the dsn you create for db2 database. for ex. if dsn name is kishore_dsn, should the file be initkishore_dsn.ora, or it should be the name of local oracle database service.
DESIGN.FORESEEINDIA.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = compaq6)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = design)
KISHORE_DSN =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = compaq6)(PORT = 1521))
(CONNECT_DATA = (SERVICE_NAME = KISHORE_DSN)
(HS = OK)
I am getting ora-12154 tns could not resolve service name, while tring to access db2 after creating public links.
I would appreciate if you can send me step by step generic connectivity ,connecting db2 from oracle.
Prabhath.

Hi Tak,
Thanks for your response.
My odbc data source name is : kishore_dsn
driver : ibm db2 odbc driver
I am connecting db2 8 on windows from oracle 9i on windows.
MY iniths_sid.ora file is initdesign.ora
initdesign.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = KISHORE_DSN
HS_FDS_TRACE_LEVEL = 0
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
I created listener.ora in network/admin
# LISTENER.ORA Network Configuration File: c:\disk1\software\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC5))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = compaq6)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = c:\disk1\software)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = design)
(ORACLE_HOME = c:\disk1\software)
(SID_NAME = design)
(SID_DESC =
(SID_NAME = design)
(ORACLE_HOME = c:\disk1\software)
(PROGRAM = hsodbc) )
my tnsnames.ora is
# TNSNAMES.ORA Network Configuration File: c:\disk1\software\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.FORESEEINDIA.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = compaq6)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
EXTPROC_CONNECTION_DATA.FORESEEINDIA.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC5))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
DESIGN1.FORESEEINDIA.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = compaq6)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = design)
DESIGN.FORESEEINDIA.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = compaq6)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = design)
KISHORE.FORESEEINDIA.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = compaq6)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = design)
(HS = OK)
My sqlnet.ora file
# SQLNET.ORA Network Configuration File: c:\disk1\software\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
NAMES.DEFAULT_DOMAIN = foreseeindia.com
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)
Before creating these files I had run caths.sql from sys user.
After all the configuration
I logged into database with service name : kishore
user : scott
I created a db link
create database link custard
connect to scott identified by tiger
using 'kishore';
I issued a select * from addr@custard; where addr is in remote db2 database.
I am getting the following error
ERROR at line 1:
ORA-28546: connection initialization failed, probable Net8 admin error
ORA-28511: lost RPC connection to heterogeneous remote agent using
SID=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=compaq6)(PORT=1521))
)(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=design)))
ORA-02063: preceding 2 lines from CUSTARD
I am struck with this for the past 1 week, so kindly help.
If someone can access a tar from metalink and post it also, as currently we donot have the support.
Regards,
PrabhathG

DB2 Connect Server appear after Migrating DB2 from v8.2 to v9.5

I migrated the database software of SAP ECC 5.0 System from DB2 v8 fixpak 17 to DB2 v9.5 fix pack 4. After I installed the SAP DB2 licenses, I noticed that a new product "DB2 Connect Server" remained in 'Trail' status.
Product name:                     "DB2 Connect Server"
License type:                     "Trial"
Expiry date:                      "01/02/2010"
Product identifier:               "db2consv"
Version information:              "9.5"
I did not select this product during the installation of Enterprise Server Edition.
Do I need to remove the product "DB2 Connect Server"?
Is there any problem with let the product "DB2 Connect Server" expired?
Will the following command remove the product?
db2licm -r db2consv
Thanks in advance!

Dear Sameer,
DB2 Connect Server is independent component whose purpose is to connect applications to data.
DB2 Connect provides connectivity to mainframe and midrange databases from Linux, UNIX, and Windows based platforms. You can connect to DB2® databases on OS/390 and z/OS, iSeries, VSE, and VM. You can also connect to non-IBM databases that comply with the Distributed Relational Database Architectureu2122 (DRDA®).
If you are not having any scenarios (in you system landscape) to use DB2 server/client Connectivity to mainframe/mid-range databases, then you can remove that product by executing db2licm -r db2consv
If your DB2 connect Server license is already expired, and you are not able to remove it, then following workaround will be helpful.
Workaround may be:
1. db2stop
2. Adjust your system clock at some point in past when this license was still trial.
3. db2licm -r db2consv
You can get some useful information about DB2 connect role in SAP landscape in this document[ Streamlining DB2 Connect for SAP|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/207c5c32-51ea-2a10-c7bc-bcfca74552d5&overridelayout=true].
Regards,
Bhavik G. Shroff

DB Adapter connecting to DB2

"We are using DB Adapter to connect BPEL (10.1.2.0.2) to DB2 V7 (Z/OS) using the DataDirect JDBC Drivers. If we connect using the DBA's username/password (SYSADM role), it seems to work fine. But if using any other user's username/password, we cannot see any tables/views/etc. from JDeveloper - and no schemas are available to choose from either. The DB2 DBA has not used JDBC to connect to their DB2 instance before - but cannot see any missing permissions for the non-DBA usernames. The catalog has public read permissions - and all of these users can see everything just fine if they go in through the normal green-screen console. Does anyone have experience with connecting to DB2 on Z/OS and can help us?"

Hi Anuj,
I tried the Option 2 given in the thread which you have mentioned.
Our DataSource is targeted to the managed server so we just restarted the managed server.
I am still getting the same error of
"Cannot call Connection.commit in distributed transaction. Transaction Manager will commit the resource manager when the distributed transaction is committed."
Are there any other alternative approach to fix this issue?
Regards
Nithya

Not able to connect to DB2 using generic connectivity

Hi
We are trying to connect to DB2 using Oracle Generic connectivity and we are getting ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from ODB2
Log file is not even generated even though we set the parameter to debug. We are using Oracle 10g on Linux and Neon Shadow direct to connect to db2.
The following are the setup we had done in our oracle db side
initdb2.ora
HS_FDS_CONNECT_INFO=NEON_dev_conn
HS_FDS_TRACE_LEVEL=DEBUG
HS_FDS_SHAREABLE_NAME=/home/NEON/Shadow/lib/libscodbc_r.so
added below entry in listener.ora
(SID_DESC =
(PROGRAM = hsodbc)
(ENVS=LD_LIBRARY_PATH=/home/oracle/product/10.2.0/lib:/home/NEON/Shadow/lib)
(SID_NAME = db2)
(ORACLE_HOME = /home/oracle/product/10.2.0)
added below entry in tnsnames.ora
DB2ODBC =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = test.db.com)(PORT =1523))
(CONNECT_DATA =
(SERVICE_NAME = db2)
(HS = OK)
Please suggest on this.
Regards
S. Senthil

No gateway log information generated even with setting trave level to DEBUG indcates that the listener cannot start the gateway process.
Please check the listener.log for details on the failure. Secondly, what kind of Linux is it? 32- or 64-bit?
Regards,
Ed

Building an APEX app that connects to DB2/UDB

I have NO experience with APEX but - have been browsing the documentation in considering it's use as a web application/dashboard reporting utility.
However - I'm wondering if it allows for the ability to connect to DB2 as well as Oracle...
i.e. - building a form that allows a user to 'pull' data for analysis from a DB2 instance and - generate reporting results that would then be stored in an Oracle instance.
I apologize if this has been answered - or was answered in some obvious way that I missed in the documentation.
Any help is appreciated.
Thanks

It requires the use of an Oracle database. If you want to use heterogeneous services services to communicate with an external non-Oracle database, you may be able to do it. But if you have no need for an Oracle db, and just want a dashboard solution for DB2, this is really not the product for you.
I say it requires the use of an Oracle database because it runs off of database packages written only in pl/sql, thus can't port to other databases.
In this case you'd probably want to use php or something that can connect to multiple data sources.

I need Help for Connect To DB2 with JDBC

I'd like to know why I Have this problem.
The DB2 v 5.10 is in a IBM OS/390
I know the IP, PORt, DBNAME and I'd like to connect to DB2 with my windows XP using JDCB from IBM.
I use JDBC Universal for DB2 type 4.
Class.forName("com.ibm.db2.jcc.DB2Driver");
Url = "jdbc:db2://IP:PORT/BDNAME";
DriverManager.getConnection.... (url, user, pass)..
If I execute this, I have next problem
SQL state = null
Error code = -4499
There is no available conversion for the source code page, 1208, to the target code page, "". DB2ConnectionCorrelator: null
Why is this?
Finally, the web application will running in a AIX IBM with machine, It could be that this machine (aix) can connect with the IBM OS/390 with JDBC for iBM?
Thankss!!!

Check how you configured the IP on the laptop and computers, assigned by router with DHCP feature enabled? Or configure manually? If it's assigned by wireless router, then make sure you assign big enough IP range in DHCP setting. Take a look on using ping to troubleshoot network and wireless router configuration articles to help you more..

Crystal Report Connect to DB2 z/OS

Post Author: pabhijit
CA Forum: Data Connectivity and SQL
Hi
I am trying to make a DB2 connection from the crystal report interface using JDBC(JNDI).Using com.ibm.db2.jcc.DB2Driver as the database class name.
Database - Mainframe DB2 z/OSCrystal report version - Crystal Report 11.0Database Class name - com.ibm.db2.jcc.DB2Driver
Getting the below error.
Failed to retreive data from database.Details: SQL Exception: [SQL State] null [Error Message]Invalid argument: unknown column name TABLE_NAME [Database Vendor Code: -99999]
Can anyone guide what am I missing..?

Post Author: pabhijit
CA Forum: Data Connectivity and SQL
Hi thanks for the response
Well let me rephrase my issue.
Usually when we connect to any other DBMS e.g Oracle/Sybase it downloads the schema into the crystal report interface, that makes life simpler while designing report.In my case schema is not getting download when am connection to DB2 z/OS. However I can connect to the DB2 server and can use any SELECT from Table queries from "Add Command" option.

Connecting ZOS DB2 from SQLDeveloper

Similar Messages

Maybe you are looking for