Connecting zr65mc camcorder to vcr using ilink cable

Ihave a Canon ZR65MC Camcorderand a Sony RDRVX500 VCR and want to dub tapes from the camcorder to DVD using an i-Link cable/IEEE 1394 cable 4 pin to 4 pin. My question is; is the ZR65MC DV output a 4 pin jack?Any help will be highly appreciated. Thanks. Natlom.

Hi Natlom,
The ZR65MC was not designed to work with a firewire to iLink and is not supported. That said, since you're trying to record to a VCR, I recommend using the STV-250N Stereo Video Cable.
This cable, which was included with your camcorder, can transfer video to your VCR's audio video terminals. Check out page 42 in the ZR65MC Manual for the information. To see the manual, click here.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

I have an ipod classic 160gb and i also have the dock to connect it to my TV using composite cables. I would rather use component then the composite cables. Does Apple sell a component connection to hook up my ipod to hook up to my TV?

I have an ipod classic 160 GB and I also have the dock to connect it to my TV with composite cables. I would like to hook it up but using component av cables. Does Apple sell a component connection to hook up my Ipod to my TV?

Yep, part number MB128LL. Got it from this KB page: http://support.apple.com/kb/ht1454

How to connect nokia 6610 to pc using data cable

i hav dku-5 connectivity adapter cable and i have installed both driver and pc suite but still i cant connect my nokia 6610 phone to my pc how can i connect it?..

I believe the DKU-5 cable is no longer supported by the current versions of PCsuite and Ovi Suite. It was replaced by the CA-42. If won;t work if you are trying to use it with the latest version of pcsuite.
Options are to get hold of a old version of PCsuite or to get the newer cable. There should be an old version of PCsuite on the disc that came ith the phone.

Connecting N95 to ovi suite using usb cable

I have just upgraded to windows 7. I installed pc suite and ovi suite just like i had before on windows XP. However when i try connecting using ovi suite and choosing the option of pc suite on the phone when connecting the usb cable i keep, ovi gives me the message "Please wait while USB drivers are installed on your computer" and stays in this state like for ever. I didn't have this problem before when using windows XP. Please help me
Attachments:
ovi_n95.jpg ‏302 KB

I've had similar problems, but wait for the drivers to install, also sometimes my phone won't connect straight away, pulling the usb cable out of the phone and pushing it back in again quite quickly usually gets the connection to work ok !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Can connect over wlan, but not using ethernet cable between mac and extreme

Hi, I have a brand new Airport Extreme base station. Wireless LAN works well and both my wife's and my Mac can connect to the internet. When I connect the ethernet cable to my macbook, it does not connect to Extreme. Is this a feature or a required change in the setups?
br
Vesa

vesaw, Welcome to the discussion area!
On your MacBook, open System Preferences-> Network preference pane and ensure that Ethernet is enabled.

Cannot Connect Pavilion dv6 2020sa laptop to HDTV using HDMI cable

Hi
I have tried to connect my laptop to HDTV using HDMI cable but it just comes up with a 'No Signal' message on TV, any ideas? I have done a search on internet with no joy.
Operating system is Windows 7
TV is 32" LG LCD HDTV

I have been having the same issues trying to connect my Laptop to my TV to use as a DVD player. A normal HDTV cable would not work. I went to Best buy, and found a HDMI cable that said "Laptop to HDMI cable" It was the only HDMI cable out of all of the HDMI that said "Laptop to HDMI". It was also twice the cost, $50.00 for a 10 foot cable. It seems a little to high in price so I am looking for a cheaper one on the web. If I find one, I will post to let you know.

Not able to connect N70 to pc(xp) using ca-53 cabl...

Not able to connect N70 to pc(xp) using ca-53 cable
hi i am having this trouble from a year... i am unable to connect my phone n70 using cable to my pc,.,. even after installing all drivers n pc suite n havin it reinstalled also n again doin d same process.. its not getting detected at all.. please help me out... pleaseeee..been tryin 4m a year..nevr checkd des forumss.. hopin som bdy ll help ,me out.. !!!. !!!!

The DKU-2 cable is no longer supported and so cannot be guaranteed to be compatible with current PC Suites, you should be using either your current CA-53 or the CA-70.
Have you had the chance to connect any other phone with the PC using this cable? This would test if thr cable itself might be faulty.
Otherwise remove PC Suite, PC Connectivitiy Solution and Connectivity Cable Drivers from control panel, run the PC Suite Cleaner program that you can get from the PC Suite support pages on the web site, then reinstall everything.

TS3274 How can I connect tv to ipad? Want it to use netflex but will not connect using USB cable.

How can I connect tv to ipad? Want it to use netflex but will not connect using USB cable.

http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/cables_docks
You should find a solution here

As a Verizon FIOS client, can we just use Ethernet cable to connect to time capsule, or do we need their router to connect to the time capsule?

As a Verizon FIOS client, can we just use Ethernet cable to connect to time capsule or do we need the Verizon router to connect to time capsule?

The Time Capsule is indeed a wireless router with simultaneous dual band capability...and a hard drive for backup purposes. You can use that to your advantage if you configure the Time Capsule as I suggested in Bridge Mode.
The Time Capsule will provide a 802.11n 5 GHz band and a 802.11n/g/b compatible 2.4 GHz band to allow virtually any device to connect to the network.
I suppose that you could also use the "g" wireless network provided by the Verizon router as a "guest" network or something similar if you really do need another wireless network.
It might be possible to configure the Time Capsule as the main router on the network....that's a question for Verizon. But even if you might be able to do this, I'm sure it is not supported by Verizon, so you would be on your own in the event of any Internet connection difficulties on your service.
And, since the Time Capsule does not have a built in modem....you would still need to add a separate modem to the installation anyway.
That's why my suggestion is to use the Verizon device as the "modem" and let the Time Capsule provide the dual band wireless network and of course, handle the Time Machine backups.

Why can I no longer use hdmi cable to connect to the tv

WWhy can I no longer use hdmi cable to connect to the tv

Anyway, with the introduction of ios 8.x, apple stopped supporting older a/v cables. You need to get the latest a/v cable with the correct firmware. There is a little chip in the a/v cable. go to the apple store. Buy a new cable. Verify the cable works in the store.
some people report success with a full factory restore.
Re-boot ipad.
Press and hold the Sleep/Wake button until a red slider appears, then drag the slider. Then press and hold the Sleep/Wake button until the Apple logo appears. page 128 iPad user manual.
force power down if the above give you trouble.
Hold down both the Sleep/Wake button and the Home button. Ten seconds or more. Hold until the Apple logo appears.
more details on re-booting:
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Reboot-Your-iPad-Power-Off.htm
Restore to factory settings by loading the latest version of ios that your machine will support:
   Do a full backup of your device. Twice is best -- cloud and computer.
   "You can use iTunes to restore your iPhone, iPad, or iPod touch to factory settings and the latest version of iOS."
   http://support.apple.com/kb/HT1414?viewlocale=en_US&locale=en_US
   "You can put your iOS device into recovery mode, then restore it using iTunes.:
   http://support.apple.com/en-us/HT201263

Macbook does not recognize iphone 5s when connected using usb cable that came with charger

I have a mac book pro Retina, 15-inch, Late 2013 and iPhone 5s. When I connect iphone to the macbook using the usb cable that came with iphone charger, macbook pro is not recognizing the iphone 5s.
Does any one have any solution for the problem

iOS: Device not recognized in iTunes for Mac OS X
BTW, this is the Mac Pro desktop forum

HT4235 my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection? i just want it to connect to my itunes again!!!

my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection?
i just want it to connect to my itunes again!!!
Thank you to anyone and everyone that manages to help!

Hello webster995,
Thank you for the details of the issue you are experiencing with your iPhone not appearing in iTunes. I recommend following the steps in the article below to troubleshoot the issue you described:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

My camera Canon G3 (i know it's old) no longer connects to iPhoto (8.1.2) on my iMac, I have checked with my friends iMac same model iPhoto version and it works fine using my cable, I would appreciate any help getting this sorted

My camera Canon G3 (i know it's old) no longer connects to iPhoto (8.1.2) on my iMac, I have checked with my friends iMac same model iPhoto version and it works fine using my cable, I would appreciate any help getting this sorted

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Apple TV won't connect properly to Sony home theatre system using hdmi cable.

Using an HDMI cable to the port on the home theatre system I can get sound, but the picture is intermittent. It Comes on for 1second, goes of for 10 seconds.
If I connect directly to the TV using the HDMI to DVI-D cable it works, but because I am using a Fujitsu plasmavision it is a monitor only with no speakers.
Would really like to get this to work and don't understand why the video signal is intermittent from the blueray player. Other inputs into the player through the HDMI port work OK (such as a set top box).

Just installed my Vizio SoundBar with my new LG TV & Apple TV 2... The trick to get the Apple TV 2 to send audio to the Soundbar is on the Apple TV Menu under audio change it to 16 bit. Boom it works.

HOW CAN I CONNECT IPHONE 4 INTERNET TO MY PC USING USB CABLE

HOW CAN I CONNECT MY IPHONE 4 INTERNET CONNECTION TO MY PC USING USB CABLE AND I HAVE DONE TETHERING IN MY PHONE AND ALSO DOWNLOADED ITUNES USING FLASH DRIVE AS I HAVE NO INTERNET CONNECTION IN MY PC AND IN MY PC THERE IS NO DETECTION OF ANY APPLE DEVICE. PLZ HELP ME

First, knock off the all caps typing. It is considered shouting, rude, and is just plain hard to read.
Since you use the term "PC," are you using an Apple computer or something that is Windows based?
Barry

Connecting zr65mc camcorder to vcr using ilink cable

Similar Messages

Maybe you are looking for