Connectio Failed

Hi. Im using flash media server and have set up a videochat.
Im using connection string: rtmp://localhost/videochat. This
connects locally from the same machine but cannot connect from my
laptop or other pc. Ive tried differrent variations including:
rtmp://myIPaddress:1935/videochat.mydomain.com
And just about every other string i can think of and have
read about in the manuals.
In config files ive included mydomain in ALLOW connection.
The script im using is AVchat but all of their connection string
sugestions fail. Can anyone give me an idea what might be happening
here? Thanks in advance for any assistance.

Doan,
Typically this error is a result of the XL Reporter getting confused because you have both .Net 1.1 and 2.0 framwork installed on the workstation.  There are a few different SAP Notes on this that will assist you with resolving the error on the SAP PartnerEdge Portal.  You will want to look at SAP Notes 927950, 918188 and 898635.
HTH,
Eddy

Similar Messages

  • Iphone 4s wont turn on

    After uninstalling appsync from cydia I did respring
    The respring circle wont stop so I force turned off the device by click 10 sec both buttons
    After that, tried to turn on device but it stuck at the apple boot logo and never turns on
    I have this options: enter DFU, force turn off, and enter recovery mode
    anybody, HELP???
    btw i own jailbroken 4s, ios 5.1.1
    Thanks
    - I've tried connect to the device by SSH with Cyberduck (I already know what is my IP, username = root, password = alpine), but i got an error:
    Connectio failed - connection refused.
    Please Help!

    *** I DON'T WANT restore it because all my data will be deleted
    (I have important pics and etc, lol)
    Sorry for my English if I had mistakes..

  • Websites failing to load, games lag, but connectio...

    Hello,
    Hoping someone here might be able to help me out with this one. For the past few days now some web pages havbe been failing to load and games are occasionally disconnecting. However the entire time our connection seems to be remaining stable and connected.
    It appears to happen for no reason, and it only affects some websites. bbc.co.uk, google search, and these Broadband forums. Other sites will load perfectly fine, including both the BT speedtest and the ookla speedtest (both of which show our internet speed & ping to be perfectly fine.
    I'm at a loss as to what could be causing this issue. I've set the DNS settings in my network adaptor to google DNS to see if that makes a difference, but the fact it affects online gaming in the form of lag makes me thing this is not the case.
    I'm hoping to try a traceroute the next time the issue happens, and hopefully have it complete. The problem is by the time we confirm a non-working site and get part way through the traceroute the problem seems to fix itself so we cannot get confirmation of where the issue is coming from.
    I'm wondering if anyone else is having similar problems, or has maybe had a similar problem in the past and can suggest any steps or tests I can take to find/remedy this problem?

    nothing has been posted here about it have you checked the service status page or the status phone line 08001690199 and see if there is any problems in your area
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • ODI-1228: Task TMP_BATCH_MST (Control) fails on the target ORACLE connectio

    Hi all,
    i received this error ...plz help me...
    i build process of data migration bt i received this error when i start exection of this process....
    ODI-1228: Task TMP_BATCH_MST (Control) fails on the target ORACLE connection odi_oracle.
    Caused By: java.sql.SQLSyntaxErrorException: ORA-00933: SQL command not properly ended
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
         at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
         at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
         at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
         at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
         at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
         at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1079)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
         at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3937)
         at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1535)
         at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
         at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
         at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
         at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
         at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
         at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
         at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
         at java.lang.Thread.run(Thread.java:662)

    Have you selected the key column in target data store ?
    Bhabani
    http://dwteam.in

  • J2EE fails to connect to the ABAP backend system

    We have J2EE 640 Sp16 Abap+Java. As we configured this node in high-availability, we applied note Oss 757692 to the J2EE.
    Anyway the J2EE does not come up.
    Into the std_server0.out we see the following:
      Service dbpool started. (1503 ms).
    May 25, 2006 3:44:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_25] Fatal: User Management Engine
    (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connectio
    n data are correct and the backend system is available. Error message: "User not authorized (session closed)". Connection data (
    obtained from properties of UME service in section "ume.r3.connection.master.": "{
      passwd=********
      receiverid=master
      sysnr=00
      client=100
      poolmaxsize=10
      user=SAPJSF
      receiverid_guest=master
      ashost=sap3
      snc_mode=0
    We double checked the set6tings of note 757692 and all of them seems to be correct.
    We changed also the psw of SAPJSF in the ABAP stack and also in Global server configuration by mean of the configtool for the ume.r3.connection.master.psswd item
    Neverthless we continue to recive this error.
    What's wrong ?
    Regards

    Could it be because you tried to do this in an AS Java + AS ABAP installation? The note 757692 says quite distinctly, "This note covers the procedure for the j2ee engine only!" The statement does not make it clear if this note refers to only a standalone AS Java.
    My saying so is not very helpful, but the note also goes on to say, "Should you wish to change the host name of a server in a test !!! !!! system, you should do so only with the assistance of an SAP!!! !!! consultant.!!!

  • Form server failing with networ error

    Hi
    I have a forms 10g application deployed over a HPUX server.
    the problem is FRM-92102 error (a network error has occured)
    whenever the server is restarted i.e. I access it for the first time I am able tologin to the forms and open few forms, after whic the server goes down with the above error.
    I have to restart the forms server because it would show the same error when try to connect agin
    Is there some limit on the number of sessions which can be opened after which the connectio is not allowed because all of my forms open in a new session .
    on other server same application runs fine without failing.
    but I am not able to figure out the configuration difference
    Thanks
    Sapan

    hye..
    try this way...
    sometimes i also get this kind of errors
    the solution that somebody said to me is, compile all your forms..
    using in menu>program..
    under program got 3 type of compile...
    do all of this..
    for compile PL/SQl use ALL to compile all...
    try 1st n let me know how it goes on..
    cu

  • Connection for Source failed because the environment is not trusted

    Good day all,
    This is the second time I come across this error on two different forms.
    This happens whenever I have a form connected to my database(SQL) and configured my ODBC.
    My form is Reader Extended, when I load it outside LC Designer I get this error : "Connection for Source failed because the environment is not trusted".
    I have searched for solution, one that I saw says one must change bindings from None to Normal, I've done that and didnt solve my problem.
    Can someone please assist me.
    Regards,
    Ace

    Check the two below links and see if they can be of any helpful to resolve your issue.
    In this thread Paul is asking to change the DSN setting.
    "If you set up your DSN as a system DSN instead of a user DSN then that message shoudl disappear."
    http://forums.adobe.com/message/2873482
    In the below blog, Steve is mentioning to clone the connection to get rid of the issue.
    You should be able to get around this by changing this line:
    var oDB = xfa.sourceSet.nodes.item(nIndex);
    to this:
    var oDB = xfa.sourceSet.nodes.item(nIndex).clone(1);
    http://forms.stefcameron.com/2006/10/12/displaying-all-records-from-an-odbc-data-connectio n/
    Thanks
    Srini

  • Bit locker drive encryption failed due to power failer and hard disk corrupted

    I ran Bitlocker drive ecryption drive D. My pc is windows 7 ultimate, while it was in progress of 1% due to power failer the encryption failed, when power resume the drive didn't showed the file format nor the size but it shows the size in disk management.
    It showed like this in My computer
    I do Have the recovery code password and back of recovery password so I ran the "manage-bde-_unlock D:-rp[my code ]
    and my pc got hang  no other option rather than to press the restart button. 
    then I used commang "repair-bde -force D:I:-rp[my rp] and following info showed but it stucked in 1% about 8 hours, and there was no increase in the pecentage
    I also connected the hardisk to mac but all othe partation showed but didn't showed the encrypted one.
    I had lots of memorable picture and other backups so any one kindly help me to get out of this problem. Thanks for help

    Hi,
    The BitLocker encryption and decryption processes can be interrupted by turning the computer off, and it will resume where it left off the next time Windows starts. This is true even if the power is suddenly unavailable.
    Bitlocker-repair (repair-bde)  tool
    can't repair a drive that failed during the encryption or decryption process.
    In addition, could you please explain a bit for what drive you are trying to deal with? external one?
    When you first restart your PC, have you seen any signs that indicate that the encryption is in process?
    Regarding your scenario, please take a look to see if the following articles could help here:
    Scenario 11: Recovering Data Protected by BitLocker Drive Encryption (Windows 7)
    Besides, when running manage-bde command, did we followed the steps mentioned in the below article?
    Scenario 14: Using a Data Recovery Agent to Recover BitLocker-Protected Drives (Windows 7)
    Best regards
    Michael Shao
    TechNet Community Support

  • Cannot send email from my Touch (connection to smtp server fails)

    Hello,
    I have a new iPod Touch with 1.1.4 and the January apps. I am having a problem setting the Mail application.
    I am trying to connect to the IMAP/SMTP servers at my university. I am using the exact same settings and passwords I use on my laptop, which works fine. I can receive email fine on my Touch, but every time I try to send one it fails tellings me "the connection to the outgoing server smtp.myuniversity.edu failed".
    If I on purpose write a wrong password for the outgoing mail, the error message I get is different ("check the account settings for the outgoing server smtp.myuniversity.edu").
    The university IT people confirmed my settings, and told me that there is nothing blocking any handheld device from using the server.
    Does anyone know why this would happen?
    Thanks,
    Marcelo

    Thank you very much for your responses
    1) the link to mail setup is (sorry, it's quite long)
    http://www.knowledgepak.com/kpaksonline/kpol.asp?PiAlias=kpolpi17&k2dockey=04096 3251575739@kpol17&ViewLink=true&SkipHeader=false&printformat=true
    2) I am indeed using SSL, as instructed by IT
    3) I do use port 587 instead of 25 (25 does not work either)
    Any ideas? Thanks again.
    MC

  • BSI ConnectToDataSet...failed

    Hi
    We have a problem with the BSI, we had been getting a dump "RFC_ERROR_SYSTEM_FAILURE", I followed the SAP Note 1068271 for the debug, and the result is:
    =Thu Jan 22 11:53:37 2009
    =SAP AG, Walldorf - Business API for BSI TaxFactory 8.0
    =RfcAccept called
    =Mapping ABAP RFC_PAYROLL_TAX_CALC_US_80 to C function srv_Payroll_Tax_Calc_US_80
    =Mapping ABAP RFC_HR_TAXLOCATOR_US_80 to C function srv_hr_taxlocator_us_80
    =Waiting for ABAP function calls
    =Running function srv_Payroll_Tax_Calc_US_80
    =Loading import parameters
    =Loading export parameters
    =Loading internal tables
    =Calling Payroll_Tax_Calc_US
    =Running Connect_DB_Payroll_Tax_Calc_US
    BSI dataset                  -> 110
    ConnectToDataSource...Succeeded 
    ConnectToDataSet...failed 
    Error String ->  7777 - [Oracle][ODBC][Ora]ORA-00933: SQL command not properly ended
    =RFC error
    operation/code Connect_DB_Payroll_Tax_Calc_US
    key RFC_ERROR_SYSTEM_FAILURE
    status
    message See RFC trace file or SAP system log for more details
    internal status
    The RFC under sm59 is working fine, the error is on the connection to the Dataset according to the Debug log "ConnectToDataSet...failed".
    I don't know what to check about the Dataset, could you please help me?
    Best Regards

    Yes, it's correct.
    I checked it's 8.0.
    I think is a problem with the parameters under tf80server.bat.
    SET
    TF80_CONNECT_STRING=DSN=;UID=;PW
    D=;
    SET TF80_SCHEMA_NAME=.TF80
    REM for SAP trace debugging, uncomment below & see file
    errors.txt in gateway working directory
    REM C:\BSI\TAXFACTORY\tf80serverdebug.exe %*
    REM else for usual operation
    C:\BSI\TAXFACTORY\tf80server.exe %*
    I don't know what is the "ODBC_DSN_NAME"
    I have the user, password, the database name...
    Best Regards

  • Installation of IPC AP 7.0 Jar is getting Failed when uploading in CRM

    Hello Experts,
    we did some changes in the previosly uploded version of IPC AP 7.0  customer user exit Jar file in eclipse.
    While uploading the new modified jar through transaction /SAPCND/UE_DEV in CRM we are getting error :" installation of module <Jar file name > has failed ".
    when we checked the logs in SM 53 we seen the below mentioned error:
    Message: Exception of type com.sap.sql.log.OpenSQLException caught: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permit ted)" is not supported
    caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permitted)" is not supported
    --> com.sap.sql.log.OpenSQLException: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is n" is not suppor ted
    caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is not permitted)" is not supported
    at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Ljava/lang/Class;Ljava/lang/String;[Ljava/lang/Object;)Lcom/sap/sql/log/OpenSQLException;(Syslog.java:85)
    at 
    if  required i can post the complete stack trace.
    any inputs/suggestions are most welcome.
    Thanks & regards,
    Siddharth

    Hi Mark,
    Yesterday after Posting the thread we found the same Note ,Issue occured because of  JAVA write access was not enabled on the table ,After enabling it as mentioned in SAP Note, Jar file get successfully uploaded.
    Thanks for your Help also.
    Regards,
    Siddharth

  • Upgrade to ERp6 phase STARTSAP_NBAS error: DDIC login fails

    Hi
    During an upgrade from 4.7  to ERP6  I get the following error
    message in phase STARTSAP_NBAS:
    SYSTEM START failed, code -2
    -2: the test rfc did not work.
    Try to log on to the system with user DDIC
    When I try to log on to the system as user DDIC, I get the following
    error message:
    DB-Error -0
    SAP* can log in .The password I submit is correct. I have not changed this password at
    any time.
    Any ideas are most welcome

    Hi,
    DB-Error -0 indicate problem with kernel, try to upgrade kernel.
    check Note 760175 - 6.20: Logon not possible (after DB export or system copy)
    regards,
    kaushal

  • Running workbook from .bat fails to start application missing CORE40 dll

    I have been running several workbook via windows task scheduler / vbscript &/or bat files.
    I now have a new box which I access thru Remote Desktop Connection, so I can run all these automated updates without having my screen blinking everytime a shedule workbook starts.
    If I click on the actual Discoverer icon, or the discoverer workbook shortuct, all works well.
    If I click on the .bat file, or try to run the workbook via the cmd , it gives me the following error:
    DIS4USR.EXE – Unable To Locate Component
    “this application has failed to start because CORE40.DLL was not found. Re-installing the application may fix this problem.”
    The dll is under c/orant/bin/core40.dll, which is where I've read it should be, and it works fine in my regular box...
    Please help! URGENT :)
    Thanks!

    Hello
    Check the PATH environment variables for the machine you are on and the one you are connecting to.
    You might not have Discoverer's objects in the PATH.
    Another possibility is that you have more than one piece of ORACLE software on the machine and you may need to also set the ORACLE_HOME within the BAT file.
    Best wishes
    Michael

  • Due to my laptop screen failing i have to return to facory settings, can i reinstall adobe reader and adobe air afterwards?

    Due to my laptop screen failing I have to return it to factory settings, can I reinstall adobe reader and air afterwards?

    I don't see why not. Do you foresee a special difficulty?

  • Downloads to documents folder fail due to parallel upload

    Hi, mobile documents is a great tool that I use to replicate all business relevant documents to mobile clients. However there is one great disadvantage for me. When you download a file that is a bit larger (>1 MB), during the download the client will already start uploading the temporary file. So the download then fails as it cannot convert the temporary file into the final one.
    This is something that does not happen for equivalent clients (for example skydrive). Do you think this is something that can be fixed?
    thanks,
    Heiko

    Hi Heiko,
    Let me explain again:
    You said "uploader locks the file so that it can no longer be changed". For the temporary file it is the downloader which have locked the file. Hence, the impression that file is getting uploaded because it is locked is hence not correct.
    The next version might be available in Q1\Q2 2014. We will keep everyone updated via community.
    Best Regards,
    Ashwani Kr Sharma

Maybe you are looking for