Connection 8.5(1)SU2 and Full Mailbox NDR turns on MWI without any message

I called a co-worker whose Connection 8.5(1)SU2 mailbox was full. I recieved an e-mail indicating that his voice mailbox is full (we use Single Inbox/EWS Exchange 2007SP1), then my voicemail light on my Cisco phone illuminated and it indicated that I had one new voice message available. No one actually left me a message.
Why did the MWI light turn on when I got the NDR?

Cisco TME told me NDR is a message (text), if you don’t have the conversation selected to list NDR’s it won’t read them out via the TUI. By default it does not. However I can't figure out if this is something you can turn on.

Similar Messages

HT4061 can I connect my iphone to my dad's imac and download my pictures to his machine without any issues?

can I connect my iphone to my dad's imac and download my pictures to his machine without any issues?

AnaMusic wrote:
By Design you can only Sync the phone to One iTunes Library at a time...
Syncing & importing pics/videos in the camera roll are two entirely different things & have nothing to do with each other.
You can import iPhone camera roll photos/videos using any computer you want...this has nothing to do with iTunes or syncing.

My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?

My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?

I leave it charging until it gets back to full, usually it turns on after a little bit of time after plugging it in, but all its doing is going to the apple logo screen and going blank again.

My lock button isn't working and I completely forgot that, I turned off my phone to restart it and now I cant turn it back on, Any suggestions?

My lock button isn't working and I completely forgot that, I turned off my phone to restart it and now I cant turn it back on, Any suggestions?

You need to get the on/off button repaired.
You can try connecting the iPhone to a power source which should power the iPhone on.

My power button has been broke for a while and now i cannot turn my phone on, any suggestions ?

my power button has been broke for a while and now i cannot turn my phone on, any suggestions ?

If the battery was completely dead it may take some time to get it going.
Leave it pluggen into a wall jack for about 15 minutes then check back.
If not, you will need to make a Genius Bar appointment or contact Apple for a repair.

Hi, yesterday I was a strange thing happened. my iphone was fully discharged and went out, when I turned there were not any messages. This has never happened to anyone?

hi, yesterday I was a strange thing happened. my iphone was fully discharged and went out, when I turned there were not any messages. This has never happened to anyone?
Thank you.!

thanks KiltedTim.....i hope its new...i brought it new so why would i want a refurbished one.
I think you might be right with them not being out long enough...well here's hoping

HT1430 i updated my ipod touch and it is not functioning. The apple logo blinks and it didin't turn off either. Any help?

i updated my ipod touch and it is not functioning. The logo is blinking and it doesn't turn off either. Any help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Z77A-GD65 ram and DR. mos problem after 2 years without any HW change or OC!

Hi guys, i have three Z77A-GD65 from 2 years with the same hardware config, no overclock or others OC settings ....simply default bios settings; in this last 2 months, not at the same time, all of my 3 mainboards have the same identical problem.
One day, from nowhere, without any reason, i start my pc and mobo don't start, hangs with code 55 ( memory error) and Dr mos alarm led goes on, i try to reset bios .. nothing.
I Switch multibios to "B" bios and works perfectly .. i've tested all of RAM modules and result works perfectly !! .... all of three mainboards have the same identical problem!!
Now i use all my 3 PCs with "B" bios and works perfectly, because "A" bios hangs always with code 55 and with Dr. mos alarm led on, i try to update and downgrade "A" bios ... nothing to do ... "A" bios don't work anymore.
Any idea?

Quote from: Nichrome on 19-July-14, 02:32:51
Don't have to be rude
If same problem is on 3 motherboards then is something wrong with RAM or BIOS not the motherboard
>>Posting Guide<< Reminding again if you want to receive any help.
Nichrome, you misunderstood! ... I just responded to your affirmation .. that's all, it was not my intention to was "rude" as you wrote! OK?
Ram modules have been tested on other Asus mainboard .. .. no read/write errors and no hangs problems ... so all Ram modules are fine
About bios ..... maybe primary bios is physically damaged.... i try to reflash bios also with old version .. no way .. maybe primary bios damage in all 3 mainboards !! very strange!!! ... you know if there's a know manufacturing defect on this MB bios maybe on a particular MB serial part number? because i bought all 3 mainboards at same time about 2 years ago.
Quote from: Sea Dog on 19-July-14, 02:40:52
Obviously, there is 'something' that has caused BIOS corruption in all 3 mainboards A chips. Whatever that 'something' is, it may happen to the backup B chips as well. Recommend to concentrate on finding this 'something', what the common denominator is, and restoring BIOS chips A before the mainboards may become expensive paperweights. A shop with an SPI flash programmer device can fix the broken BIOS chips if not comfortable with doing the recovery procedure yourself.
Hi, yes i agree, In fact, my fear is to have, in a while, these mainboard totally unusable! ..... i think that primary bios is physically damaged or i hope, software damaged, I would try to recover it, if it's only a software problem (i hope so) ... do you know a procedure to completely erase cleanly that reflash the primary bios? i try to use dos MSI flash utility with "/p /b /n" options .. no success to restore A bios ... same story ... error 55 and DR-mos alarm led on.

My volume button is stuck and I can't turn it up. Any solutions?

my volume button is stuck and I can't turn up the volume... any suggestions?

Your issue has nothing to do with Apple networking. You may get better results posting to one of iOS areas of the Communities.

I can not connect to iswifter, some times it is connected and some time it shows " UNABLE TO CONNECT TO SERVER PLEASE CHECK THE INTERNET" but my internet connection is good and other wbe site i can open without any problem. Please guide me..

I can not connect to iswifter, some times it is connected and some time it is not connected and getting message " UNABLE TO CONNECT TO SERVER , CHECK YOUR INTERNET" but my internet connection is ok and I can open other web site with out any problem. Please guide me how to solve this issue.

Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
 Cheers, Tom

HT201401 hello there . i was use my iphone and its was working and i found it stuck and after while is turn off .stop working any more .its won`t turn on or connect to computer or charge ... i don`t know what is going on ?

plz someeone help my iphone stuck then turn off and won`t turn on any more or connect to computer or charge any more????and today i found it working for 1 hour and turn off again plz help

Who repaired the phone? I suggest taking it back to this repair facility. Since Apple replaces phones instead of repair, the repair facility would be the one to take care of your problem.

I turned the Ipad off after a game and now will not turn back on. Any clues?

I just finished playing a game on my new Ipad, turned it off and now it will not turn back on! The battery was charged. Nothing comes on the screen when I plug it in to the charger either. Any clues?

Be sure to try charging it off the wall plug, not a USB cable to your computer - USB connections generally do not supply enough power for an iPad.

Application launches and immediately quits without any message

I have an old powerbook G4 which I use for only one purpose- to run Mathcad 6 in the Classic environment. (Mathsoft discontinued supporting Macs many years ago so I'm stuck.)
Today I started it up, launched Mathcad, it flashes its startup window then disappears and I'm back in OS X. Other Classic applications run OK.
I seem to remember this happening many years ago with an application, but cannot at all remember what it took to fix it. This particular application has been running flawlessly for me, but now I can't get it to do anything more than flash the startup screen for a second and then quit.
Any suggestions will be greatly appreciated!
George O.

{quote:title=Simon Teale wrote:}
Top 2 tips,
2. Increase the memory allocation in MathCad.
1. Reduce the screen colours to 256 or thousands.{quote}
God tips, Simon. However, setting monitor resolutions may have actually been a culprit in corrupting a preference file for the Classic Application.
Recently I just acquired a Dell monitor replacement for my G3, and when I went and changed monitor settings and graphics options the graphics for the App. to optimize it it got corrupted. I tried and tried resetting monitor and graphics settings to no avail of the corrupted graphics. Finally I remembered to trash the preference file for the app. and restarted and it was fine.
[Here|http://docs.info.apple.com/article.html?artnum=61528] is the article about
memory allocation for Classic. I generally set my higher demanding applications
using the Apple menu calculator to 3Xs the Suggested Size in the Preferred Size and 2Xs the Suggested in Minimum Size. You can do this really easy too by Copying
and pasting within Classic Calculator and using the keyboard instead of the mouse
for Classics small calculator.
!http://img189.imageshack.us/img189/6584/mikemsigq.png!

Since I updated to iOS 6 my iMessage and Facetime have not been sending or recieving any messages or calls. How do I fix this?

On iMessage it the bar fills up 80% but the stops and says FAILED in read under the message. On my facetime it will wait a while and then say "Disconnected" it is not my internet that is the problem. It worked fine before I updated please give me any solution. (i have tried signing out and back in)

I think I've fixed it !!
not sure if this will work for everone but I noticed when you go on settings>messages>Send & Receive it was displaying my Apple ID twice and underneath where is says "You can be reached by iMessage at:" , it was displaying my email address twice as well, so I clicked on my Apple ID and signed out, restarted my ipod and signed back into iMessage in the settings and it just displayed my apple ID and email once. Next I restarted my router and my Ipod Touch 4g IOS 6 and it was working again !!! . Not sure if this will work for everyone but I just ****** around with it and it seems to be working for now anyway

HT1430 I turned off my ipad mini and it would not turn on again. Any help for this?

I tried that, but it did not respond.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Connection 8.5(1)SU2 and Full Mailbox NDR turns on MWI without any message

Similar Messages

Maybe you are looking for