Connection between 2 mappings

Hi
I have 2 seperate mappings.
A_MM
B_MM
There is a value in A_MM which needs to be used in B_MM. I am using PI 7.1
Thanks
SG

Can u pass it in an element that's available in target structure of MM1?
Kai

Similar Messages

Setting up a https connection between SAP CRM and genesys gplus adapter

Hello All-
We are integrating SAP CRM with genesys mysap gplus adapter. We are struck in setting up a https connection between sap and gplus adapter.
Can anyone here help me out in this like how to get the SSL Protocol, keystore, keystore password,truststore and truststore password.
Information abt Adapters server certificate. Do we need to configure the adapter for the proxy also?
Any additional comment will help. Thanks in advance!

Hello Vinod,
Please refer the following OSS notes 564085.
Please reward if helpful.
regards,
Muralidhar Prasad.C

Connection between SDM client and server is broken

Dear All,
First of all this is what I have
-NW04 SPS 17
-NWDS Version: 7.0.09 Build id: 200608262203
-using VPN connection
-telnet on port 57018 is succesfull
I can login to SDM server (from NWDS and from SDM GUI) I can see the state of SDM(green light), restart it, can navigate through tabs in GUI, but every time I am trying to deploy an ear i have this error:
Deployment exception : Filetransfer failed: Error received from server: Connection between SDM client and server is broken
Inner exception was :
Filetransfer failed: Error received from server: Connection between SDM client and server is broken
I have already read a lot of topics,blogs,notes but didn't find the solution.
Can anybody help me?
Best Regards

Having same issue. Nothing helped so far... Using NWDS 7.0 SP18.
I have turned SDM tracing on and this is what I see on client side after sending first data package:
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/17 Client: finished sending string part"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/0 Client: receive String part from Server"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl.receiveFromServer(NetComm ..): Entering method
com.sap.bc.cts.tp.net.NetComm.receive(): Entering method
com.sap.bc.cts.tp.net.NetComm: debug "Method "receive(char[])" could not read all requested bytes. There are still 12 bytes to read"
com.sap.bc.cts.tp.net.NetComm: debug "Caught IOException during read of header bytes (-1, 43):Connection reset"
com.sap.bc.cts.tp.net.NetComm: debug " throwing IOException(net.id_000001)"
com.sap.bc.cts.tp.net.NetComm.receive(): Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/1 Client: connection was broken"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/0 Client: finshed sendAndReceive"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
My connection on server is still active so I have to restart SDM server to reset and try it again.
Anyone have idea whats happening?
Edited by: skyrma on Feb 24, 2012 2:46 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM

Connection between O and BP is missing

Hi,
When i check inconsistency for a user, i am getting " Connection between "O" and "BP" is missing. When i check the Org.unit in PPOSA_BBP, i could see no BP exists for that Org.unit where user is assigned. I have replicated the org.unit from HR system but yet the BP hasnt been generated. Can you please share your idea on this.
Regards,
Prasath J

Hi Prasath,
This might be because you need to assign the user to a Purchasing Organisation or a Purchasing Group. If the user do not have BP created then you can do this by using tcode USERS_GEN.
Go to USERS_GEN and follow below steps :
1. Select Create User From Existing SU01 user
2. Enter the org id of the POrg or Pgroup under which you want to assign the user
3. Select country and execute
4. In next window one popup will occur, select Area Of User
5. In next popup enter the user id
6. Next select the user and click Ok.
7. This will create a BP and CP for the user and assigns the BP to the Org id of the POrg or Pgroup.
8. Now check the consistency of the user it will show all green.
It might give you error like eMail id for BP XXXXX is missing if the SU01 profile of the user does not contain any user id but it is not critical.
You can open the BP in BP tcode and enter the email id of the user.
Let us know if it solves your issue.
Regards,
Mayur

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

Connection between CRM back end and ASP front end website for Ecommerce

Hi All,
I want to establish the connection between a ASP website and CRM back end server(we are replacing th existing ERP back end system with SAP CRM ).
I want to know whether I have to go with XI or any other connectors provided by SAP to establsih the communication between the existing ASP website and CRM back end server..
Can anyone please help me out.
Thank you,

Okay here is the general concept for your scenario:
-You will call standard/custom RFC's(could be BAPI's) in the CRM system from the existing application.
-You will need to write a new model layer in your ASP application that calls the RFC layer in CRM
-You decide what data you want to use from CRM in your application
Let's assume at minimum you will want to use the product master, business partner master, and business transactions. You will need RFC's/BAPI's for every interaction point where you will consume/publish data to CRM.
So when an user creates an order from your e-commerce site, you will need to support saving an order in CRM. This is example of how you need to map out each function in your existing site to a part of the CRM system. Since we don't know what your site currently does, this is something you would have to do.
Once you have mapped out the business level data to the CRM system, then you can evaluate where you will need a BAPI and/or RFC call. Once that is done, then you can look at the CRM system and see what standard pieces can be called. Then everything else is custom development. Your ASP application will call CRM via RFC.
It is possible to do what you want to do, but it is going to require a lot mapping work and a fair amount of development effort to integrate the two pieces. I don't know if you might be better off looking at the SAP Internet Sales Solution instead so you could focus only customizing that application, instead of worrying about an integration problem. It just depends on how much special functionality your existing e-commerce site has today.
My general recommendation would be for you to hire a consultant that has done an SAP e-commerce project using SAP CRM in the past and let them guide you on the implementation issues. An on-site resource could better answer your "high-level" questions.
However if you have more questions please ask and I will try to answer to the best of my knowledge.
Good luck,
Stephen

Regarding connection between front end HTML and back end SQL 7.0

Hi!!
I am working on the project 'ERM'. I have designed 12 forms using HTML. Can u please give me brief idea how to establish the connection between a back end and front end i.e. between HTML and SQL 7.0. If possible can u provide me the source code for the same.
I will be very thankful to you.
Thanks,
Jigar.

Read up about multi-tier applications.
You need servlet and JSPs for the server-side presentation layer, some classes for the business logic, and some mor for the persistence layer either using JDBC or some framework like Hibernate.

How can I get connection between VC and back end ABAP system

Hi, I'm developing the kits in the VC platform, and I need to access the back end system designed by ABAP. For example, the system provides some public functions(not web services), and I hope when I click the "search" button, the VC front can call the remote functions and get the data from the back end system. In addition to that, the most important is I must keep the connection real-time. How can I do it?

Thanks for your help. At present, my VC version is 7.1.4 which isn't installed in the portal server but in local machine, and I'm new in the VC. What I want is when I click the "search" button(in the properties pannel), I can get the data from the remote server. I know the VC 6 provides similar functions, but the current version doesn't. Could you explain the details of how to get and keep the connection between them? Thanks so much.

Open connections between AS Java and AS ABAP when using JRA

Hi, we have a problem with open connections and hope that someone here could give me hint where to find a solution.
The situation is that we open a connection from a Java application to an AS ABAP. In detail, the application first connects to a statefull session bean on the AS Java by RMI. The bean communicates with the associated AS ABAP by the Java Resource Adapter (JRA).
All interactions between all components work correctly. But even after we close the application, manually close of the connections (on side of the AS Java) , remove all created and used session beans there are still open connections between the AS ABAP and the AS Java.
The transaction smgw (Gateway Monitor) shows open connections from jlaunch to our local SAP gateway using the internal communication protocol. Obviously, the established connections are not closed, even when they are open for a week or longer.
After opening 100 connections, the AS ABAP denies additional connection attempts.
We have been able to close all open connections by restarting the AS Java or by restarting the Connector over the Visual Administrator (path: Cluster Server Services Connector Container select the right connector stop / start).
We have developed our application similar to the tutorial from [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad09cd07-0a01-0010-93a9-933e247d3ba4]
Can someone explain to us why the connections stay open for so long? Is there no timeout mechanism? Or is there some way to close the connections from our Java application?

Hello,
maybe someone can help us with our problem.
We have developed our application similar to the tutorial from https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad09cd07-0a01-0010-93a9-933e247d3ba4 and it was running without problem with the SP12, now we change our system to SP16 and we are having the problem described in note 1083348, but as you can see, for us it was working with SP12 and now it doesn't work with SP16....
Here is part of our code....
    public List getAll() {
        String functionName = "bla";
        try {
            openConnection();
            MappedRecord response = (MappedRecord) interaction.execute(null, request);
            MappedRecord record = (MappedRecord) response.get("E_S_RETURN_CODE");
            if (((String) record.get("RETURN_CODE")).equalsIgnoreCase("E")) {
                throw new SQLException((String) record.get("RETURN_TXT"));
        catch (ResourceException exc) {
            throw new EJBException(".");
        catch (SQLException exc) {
            throw new EJBException(".");
        finally {
            closeConnection();
    protected void openConnection() {
        try {
            connection = connectionFactory.getConnection();
            interaction = connection.createInteraction();
        catch (ResourceException exc) {
            interaction = null;
            connection = null;
            throw new EJBException(getExceptionText(exc));
protected void closeConnection() {
       try {
            if (interaction != null) {
                interaction.close();
            if (connection != null) {
                connection.close();
        catch (ResourceException exc) {
            throw new EJBException(".");
With that code we are getting this error: "Connection handle is already closed and no longer associated with a managed connection" everytime we try to close the connection in the method closeConnection().
We were thinking that maybe we should not close the connections, because the were already close, and tried not to close the connection (connection.close()), but then after a few time we are getting the following error, because we are not closing the connections:
Connection to ABAP System could not be opened, because the Connection Factory returns "Cannot get connection for 120 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "eis/..." is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.". Please check the connection defined for the Connection Factory of the Java Resource Adapter with JNDI name...
Any help?

Connection between Structure Field and Table Field

Hello everybody,
I'm trying to find a connection between a field in the structure and the actual filed in the table of the database. For example in the structure CAUFVD you have the field PLNNR. This information is stored in the table AFFL in the field PLNNR.
In the transaction SE84 you can display a structure with all it's fields but I don't see anywhere from which table and field the information is gathered.
Can you please help me in finding the connection between the structure field and the table field in the database in which the displayed information is stored?
Thanks and best regards,
CALIN Marius-Bogdan
SAP - PP-KeyUser

Double-click on the structure field and you can do a where-used to find the codepoints, interface usage, etc. You might find it that way. You could also look at the flow logic of your screen and try to trace it back. Otherwise, you'd have to use watchpoints, the debugger, runtime analysis or various other developer tools to find the data population. If you are a user and not a developer as your signature indicates, you might need to find a developer for this. Sometimes, it can be incredibly frustrating with SAP because the data field will be handed off 4 or 5 times before it actually reaches its destination field. Unfortunately, I haven't worked with PP in at least 10 years so I can't give you a better answer; maybe someone else can.

How can i connect between WS−G5484 1000BASE−SX and GLC-LH-SMD ?

Dear experts,
My customer has 6509 A-side and B-side core switches and need to migrate only 6509 B-side to Nexus.
I have some question below.
1. Customer's 6509A-side has multiple WS−G5484 1000BASE−SX and WS−G5486 1000BASE−LX links and it is connected to 6509B-side.
But customer bought only GLC-LH-SMD for Nexus migration of 6509B-side.
I understood BLC-LH-SMD doesn't support SX type, so I am worndering how i can connect between 2 different module ?
Or should i have GLC-SX-MMD for WS−G5484 1000BASE−SX links ?
2. Current Rack has LC type patch pannel from B-side to Rack A side.
But new Nexus A-side rack is located at different row and between these rack, there is only sc-type patch pannel.
So If i want to connect from LC-type to Sc-type patch pannel, how can i connect ? do i have to use SC-LC converter ?
3. Old 6509 links use many MMF cable, and new Nexus use SMF.
Between same LX/LH links, if a side use MMF and another side use SMF, how can i connect each other ?
Again new Nexus A-side rack is located at different row and between these rack, there is only sc-type patch pannel.
Please let me know in detail, Thanks in advance, I really appreciate for your help.
Jason.

Hi Leo,
Thanks of your reply.
Dear Experts,
I seek your expert's advice for another question urgently.
Please make you time and share your experiecce.
Thanks.
Jason

I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

The password used to log in to a user account remotely is the same as you would use to log into it locally. You can also use your Apple ID, so try that.
To change your login password read OS X Mavericks: Reset a login password
also OS X Mavericks: If you forget your login password

I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is Bluetooth OK to use GPS positioning on the IPad?

Hi
I have an IPad mini WiFi (not cellular) and an IPhone 5. I use the bluetooth connection between both devices when on the road. I downloaded a navigation system on my IPad using GPS positioning. Is the Bluetooth connection working to use GPS positioning on the IPad using IPhone 5 as the hotspot?
Thanks for your input
Felix013

try a RESET ALL SETTINGS

How do i connect my macbook pro to ipad 3 to share a connection between the two devices

Hello i'm trying to establish a connection between my macbook pro and ipad 3 via wifi by creating a network but i can't seem to get it to work.
I'm trying to run a dj software called Touch OSC that enables the ipad3 to work as an MIDI controller for serato live. Please help.
thanks

Hi,I'm just wondering if you got this problem sorted as I have a similiar problem and can't find an answer anywhere.
Thanks

How to make a connection between two wireless sensor networks of different groups through gateway?did any external device or coding is needed?

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

Connection between 2 mappings

Similar Messages

Maybe you are looking for