Connection between android tablet and a wireless printer

Good day!
Can i install HP deskjet 3050A e All-in-One J611a device software without using the cd hardware for me to be able to connect my android tablet version 4.2.2 and the said printer?

Hello @GC2,
Welcome to the HP forums.
I understand that you are interested in connecting your Deskjet 3050A to your Android device.
I would like to help.
As long as your printer is on the same network as the device, you should only need to install the HP ePrint app.
Getting Started with HP ePrint Mobile Apps
This app will take place of the printer software.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

I cant establish a connection between Mac mini and the wireless keyboard

I just bought a Mac mini but I can't link the wireless keyboard with the Mac mini

Same with my new mac mini.
Got it brand new via the online shop.
Happy to start with the new mac i really got dissapointed by the fact that it`s impossible to pair the wireless keyboard unless you first connect a USB keyboard to the mac mini and start the configuration.
THIS ***** !!!
No hint at all from apple that you first have to connect the USB keyboard.
I had to borrowed a USB keyboard from my neighbour :-((
After setting things up it was no problem at all to establish the BT connection with the keyboard.
Works fine now.

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

What's the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?

Hello!!
What’s the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?
I found two things as follows.
1. MAC support
2. USB dongle
Is there anything else?

Now I’m clear!!
But there are descriptions for each on your home page over view tab. Due to this forum restriction; I cannot put the URL here.
They say for each as follows.
HP Wireless Printing Upgrade Kit --- Retain full all-in-one wireless functionality: print, fax from your PC, scan, and access photo memory cards access and PC status
HP Wireless G Print Server --- Get the same functionality with your all-in-one: printing, scanning, photo memory card access, PC faxing, and printer statusSo I got confusion, that’s why I did not get the difference for them.
And I found wrong description on your HP support document page. I recommend that you correct it, because it put consumer into confusion and break to buy this product.
The title is “HP Wireless Printing Upgrade Kit - Setting up the HP Printer with the HP Wireless Printing Upgrade Kit in Windows .”
The wrong description is “NOTE: You must turn on the computer with the computer adapter in order to print to the wireless product” at last line of “Step two: Configure other computers to use the printer. “
You can erase this line!!

Bluetooth connection between iPhone 4 and MacBook Air

How to enable bluetooth connection between iPhone 4 and MacBook Air?

I used to be able to connect my iPhone 4 with my 3 yr old MacBook Pro using Bluetooth. I used my iPhone's personal hotspot more then once to access the Internet on my laptop when there was no wireless. I don't get why it wouldn't work with my new MacBook Air. That just seems silly. My laptop found my iPhone and was able to add the device, but then my iPhone wouldn't connect. Is there really no way around this??

Connection between SDM client and server is broken

Dear All,
First of all this is what I have
-NW04 SPS 17
-NWDS Version: 7.0.09 Build id: 200608262203
-using VPN connection
-telnet on port 57018 is succesfull
I can login to SDM server (from NWDS and from SDM GUI) I can see the state of SDM(green light), restart it, can navigate through tabs in GUI, but every time I am trying to deploy an ear i have this error:
Deployment exception : Filetransfer failed: Error received from server: Connection between SDM client and server is broken
Inner exception was :
Filetransfer failed: Error received from server: Connection between SDM client and server is broken
I have already read a lot of topics,blogs,notes but didn't find the solution.
Can anybody help me?
Best Regards

Having same issue. Nothing helped so far... Using NWDS 7.0 SP18.
I have turned SDM tracing on and this is what I see on client side after sending first data package:
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/17 Client: finished sending string part"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/0 Client: receive String part from Server"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl.receiveFromServer(NetComm ..): Entering method
com.sap.bc.cts.tp.net.NetComm.receive(): Entering method
com.sap.bc.cts.tp.net.NetComm: debug "Method "receive(char[])" could not read all requested bytes. There are still 12 bytes to read"
com.sap.bc.cts.tp.net.NetComm: debug "Caught IOException during read of header bytes (-1, 43):Connection reset"
com.sap.bc.cts.tp.net.NetComm: debug " throwing IOException(net.id_000001)"
com.sap.bc.cts.tp.net.NetComm.receive(): Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/1 Client: connection was broken"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/0 Client: finshed sendAndReceive"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
My connection on server is still active so I have to restart SDM server to reset and try it again.
Anyone have idea whats happening?
Edited by: skyrma on Feb 24, 2012 2:46 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM

Communication between HP eprint and Google Cloud Print

Hi,
the communication between HP eprint and Google Cloud Print seems to be broken. At least for me.
The documents do get printed when I print vio Chrome browser or Cloud Print dashboard -- but the status in cloud print remains as "submitted". It seems like somehow the HP eprint status doen't get reported back to cloud print. In HP eprintcenter the log says "printed".
Well, I wonder who will take care of this problem ... (Hope it will not result in fingerpointing only ...)
Thanks for your support!
Best,
George
This question was solved.
View Solution.

Are you able to log back in later and the status at Google Cloud print update to reflect the true outcome of the print job? Or does it just remain as "submitted". Otherwise, if it is printing and showing in the log at ePrint Center (EPC) as printed, the issue would not be on the ePrint side but on Google's
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

"USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2

Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM)

No connection between EIS Server and EIS Console

Hi AllWhile saving a meta model I get this error message:"There is currently no connection between the console and intgeration server. Ensure the server is running and try reconnecting"I have checked properly that EIS server is installed and also running, but don't know why throwing this errors...I am unable to save the metamodel....any suggestions ?Thanks in advance !

Any Help on this please!!!

How to set up internet connection between MacBook Pro and an old eMac?

I got an old eMac without wifi and a MacBook Pro. I'd like to share the network connection via ethernet cable to my eMac, but I can't get it work.
I'd like to use it with screenrecycler and it needs a network connection.
How to do it? How to set up the connection between the client and the host? Could somebedy give me a step by step guide?
Thank you very much

Hello,
First, are you using Wifi for Internet on the MBP?
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list, Wifi on the MBP.
In Shating on both, enable File Sharing, Screen Sharing, & Web Sharing on both.
Then with the Ethernet cable between the two, find the IPs of both, or use Finder>Go>Connect to Server>Browse... see what shows up.

How to test the connection between DSD backend and DSD connector

Dear all,
I am configuring the MDSD scenario .. and i want to insure that my customization is correct
How to test the connection between DSD Backend and DSD connector ??

Hi Viren,
The problem is:
We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
Thanks,
RPK.

Connection between MacBook Air and iphone 3gs through a hub isn't good

Several times the connection between my computer and iphone has stopped or cancelled saying that the iphone had been disconnected. But nothing had been touched! Why?

Hey,
Plug the iPhone directly into the MBA. If your going to use a hub make sure it's a powered hub, the hub itself should have it's own power cord. If it's powered by the USB port then your going to have issues.
Hope it helps
Post the results :-D

Connectivity between Oracle database and client...

Hi guys,
I was asked to make a connection between oracle client and database via internet so that our clients can access the database from different parts of the country, and the data that is transmitted in the internet does not require security consideration. And I have successfully implemented this.
But later onwards they asked me to structure it in such a way so that clients must be able to select, insert, update and delete data offline, in case there is online connectivity problem.
So my question is, are there any possibilities in oracle to temporarily store data that are available in the oracle database to the client side and then later onwards transfer those datas once the clients are available online. Or are there any other alternative ways...
Additional Information - Client access the database through an application created by VB.
Please do help me on this project.
Thanks in advance for your help.
Asif.

user11000521 wrote:
Hi guys,
I was asked to make a connection between oracle client and database via internet so that our clients can access the database from different parts of the country, and the data that is transmitted in the internet does not require security consideration. And I have successfully implemented this.
But later onwards they asked me to structure it in such a way so that clients must be able to select, insert, update and delete data offline, in case there is online connectivity problem.
So my question is, are there any possibilities in oracle to temporarily store data that are available in the oracle database to the client side and then later onwards transfer those datas once the clients are available online. Or are there any other alternative ways...
Additional Information - Client access the database through an application created by VB.
Please do help me on this project.
Thanks in advance for your help.
Asif.You probably should do a cost/risk analysis. Where you are headed might be able to be done (but it will require that the "clients" also have their own copy of the database) but it won't be easy and it certainly won't be cheap, either in initial implementation or in on-going maintenance. The alternative is to take a hard look at your network connections and see if it wouldn't be cheaper/easier to be able to ensure that it is reliable. Remember "the internet" won't break, it is highly redundant. If you have connectivity issues, they will almost certainly be in your own equipment and configurations, so your (your organization) will have the ability to address and fix any issues there.

Connection between Crystal Report and SAP ECC

Hi. can you help me please.
I'm testing the connection between Crystal Report and SAP ECC. I tried using the tables,
but by making the links between foreign keys does not bring data. The other way I tried was using an ABAP function module,
but using this way, Crystal will only works like a Presentation Layer because all the work was did it in ABAP;
besides that shows the limitation that I can not pass as input a table.
what is the best practice for reporting on SAP ECC using Crystal Report?
Thanks.

Hi,
Crystal Reports is able to leverage tables, ABAP functions, SAP query and InfoSets.
what is the issue when using the tables ?
ingo

Connectivity between r/3 and bw

Hi
how do i check if the connectivity between r/3 and bw is established or not.
plz provide me steps, i m unable to find out if r/3 to bw connection is working fine or not
because though i am replicating the datasources from r/3 to bw, i cannot view the datasource in bw
for the first time
Regards

hello,
right click on the source system and select check.
If it is connected..it will say connection is ok.
or
in teh R/3 system,run T-Code sm59.
In ABAP connections, select your BI server and check for connection.
Reagrds,
dhanya

Connection between android tablet and a wireless printer

Similar Messages

Maybe you are looking for