Connection between data services and BWA

Hi,
I want to make a connection between Data Services 3.2 and BWA. Since we use RFC connection in between in order to have them talk with eachother but i wonder if there is any documentation that describes the RFC connection and configuration required particularly in this scenario. I have gone through the documentation that explains RFC connection between Data Services and BW and what configuration we have to do, so i wonder if there are any functions we have to export to BWA from Data Services like we do in case of BW connection to Data Services or some specific configuration we have to do. If someone help who has done connection between Data Services and BWA can help or if somebody can provide documentaton on it.

Hi,
You should ask this question over here: http://scn.sap.com/community/data-services
Regards,
H

Similar Messages

  • Rule sharing between Data services and Information steward

    Hi, I would like to know if there is any way we can share/import Data services validation rules or functions into Information Steward. I know that we can import informaton steward rules/functions in Data services but not sure of vice versa.
    Thanks,

    Pandeyji,
    You can only import rules into Information Steward that were exported from another instance of Information Steward.  You cannot export a validation rule from Data Services to a zip format as is required by Information Steward.  The format that the rules are exported from Data Services are not compatible with import to Information Steward.
    Please refer to the Information Steward User's Guide in the section titled Importing and Exporting rules.  This states "You can also import rules which were exported from other instances of SAP BusinessObjects Information Steward."
    You can of course export rules from Information Steward directly to Data Services where they will be available for use in the Validation transform and in dataflows.
    Thanks,
    Denise

  • Connection between data entered DSWP and SOLAR01

    Hi,
    we are currently slightly confused:
    What is the connection between data entered in DSWP and SOLAR01?
    I found out the data you are maintaining in SOLAR01 transaction do not show in DSWP but the data maintained in DSWP do show in SOLAR01.
    Which transaction are we supposed to use and what makes it nescessary that the other transaction exists?
    Probably a newby question and an answer would help a lot.
    Marvin

    Hi Marvin,
    DSWP is one of the main t-codes for configurations whereas SOLAR01 is used to do blueprinting for "Implementation and Upgrade" scenarios.
    DSWP includes Solution Monitoring, viewing of all service desk tickets, Change Request Management, maintenance optimizer (used for download of Support Packages from SAP OSS).
    No configurations are done in SOLAR01. As mentioned above, SOLAR01 is used only to perform blueprinting.
    I hope I have answered your doubts.
    Regards,
    Rinkal

  • What's the connection between data connections (3G/4G/WiFi) and phone signal strength (calls)?

    At home I'm almost always on my wifi with the 3G/4G turned off.  I've turned it on to experiment, and I get 3G in my house, but the reception (to make and receive phone calls) stays at 0 to 1 bars.  There is a Target store about a 10 minute walk from my house and I get 4G LTE when I'm shopping there, but the reception (calls) is still weak, maybe better but I can't tell you offhand.
    There is a Verizon tower about 6 miles southwest of my home; they actually had me drive out and sit under it last winter to fix a Droid Pro problem once.
    I absolutely do not understand how 3G and 4G relate to call signal strength, as it's been eluded to in other discussions.  I'm getting the impression that it affects the signal strength for phone calls, but then how can I (on my old phone) toggle it off and still have signal for calls?  When I drive into the heart of 4G LTE country I can turn off the data and still have 4 or 5 bars.  What's the connection between data and phone signal strength?

    "Service isn't guaranteed inside buildings."
    Nor outside,
    Nor under a tower,
    Nor in a car,
    Nor while eating green eggs and ham,
    Sam I am.
    Sorry Dr Seuss. 

  • Connection issue between Data service(DQ) to PI through SOAP adapter.

    Hi Guys,
    We are trying to connect the data services(DQ) with SAP PI through SOAP adapter. I provided the wsdl file to data services team and they are trying to send messages to PI. Looks like the messages are showing successful in there system, but not showing up in PI system.
    I tried the same file using xmlspy and PI receiving the messages from XMLSPY. We are wondering whats going wrong?
    Any idea about this data services system? Is there any other better way to receive messages to PI apart from webservices?
    PS: Connection is working fine from PI to DQ thorugh SOAP adapter.
    Thanks
    Deepthi.

    >>>> We are trying to connect the data services(DQ) with SAP PI through SOAP adapter. I provided the wsdl file to data services team and they are trying to send messages to PI. Looks like the messages are showing successful in there system, but not showing up in PI system.
    You are using soap sender  adapter ... Hosting webservices and DQ team is able to access your webservice.  Also using XMLSPY you are able to see pi messages.
    If you are using advance adapter engine, Please check only in the RWB -> adapter engine.
    If you are not using AAE, check in both SXMB_MONI and RWB for the wide range... Something problem with filter query in your checking...
    Note  since XMLSPY testing goes through Pi and able to monitor means you dont need another webservice client tool. 
    Solution:
    use tcp monitor to monitor the soap message ... It is better option
    /people/stefan.grube/blog/2007/03/29/troubleshooting-soap-http-and-mail-adapter-scenarios-with-tcpgateway

  • Difference Between Data Services Designer and Data Services Workbench

    Hello All,
    I am new to Data Services .
    What is the difference between Data Services Designer and Data Services Workbench .
    Am bit confused in the above two .
    Please help me to understand the same.
    Thanks in advance.
    Aisurya

    Workbench is used to create, display and modify the objects. It will display the source table data and we can see the logs of the job which we have executed and also we can see the status of a job. In bods 4.2 you can design the dataflow in workbench in previous release we don’t have that option but designer contains debugging option, you can write scripts,  it will support all databases; these option are not available in workbench. for more information refer this document:
    https://decisionfirst.files.wordpress.com/2014/07/data-services-workbench-intro.pdf
    http://scn.sap.com/community/data-services/blog/2014/03/01/data-services-42-workbench
    http://scn.sap.com/community/data-services/blog/2013/01/24/data-services-workbench-part-1

  • No connect between my iphone and itunes .. version is up to date and windows 7 and change between ports .....?

    no connect between my iphone and itunes .. version is up to date and windows 7 and change between ports .....?

    sorry but i need support from apple .................................

  • Running "Flex test drive" - Got error while attempting to connect to data service

    Hi,
    I'm a Flex / Flash builder beginner. I downloaded the 60 days evaluation, and started to run the "Flex test drive" :
    http://www.adobe.com/devnet/flex/testdrive.html
    My configuration :
    XP SP3 PRO french edition
    Tomcat 6.0
    My local Eclipse :eclipse-jee-helios-SR2-win32 (but also got the issue on the Flash Builder Eclipse, which version is 3.4.0 (Generation ID M20090211-1700)
    Flash Builder 4 with Eclipse plug-in
    All on same PC
    The Test Drive proposes examples in three technologies : Cold Fusion, PHP and Java. I'm doing the Java examples.
    Installation of Flash Builder, as well as step 1 of the Test Drive (Build the user interface) went fine. I could run the project, which at the end of step 1 correctly displayed the UI in my browser.
    Only one problem, I don't know if it is relevant for the rest of this post : I first got an error, saying that ports 8080, 8005 and 8009, requested by Tomcat, where used. After a short Google search, I fixed it by changing these ports to 8081, 8006, and 8010, in the Tomcat 6.0\conf\server.xml file.
    The Test drive second step is "Connect to data". I found some discrepancies between the Test Drive doc, and what is displayed in Flash Builder. The Test Drive says :
    "Use the Data menu and the Service Wizard to create a service for your application server. For ColdFusion and Java, specify the service file you put on your application server earlier (see Figure 9 for a PHP example). For Java, select the No password required check box, select the employeeService destination, and change the service package to services.employeeservice."
    --> But there is no "No password required check box".
    Also, when running the "Connect to data/service..." wizard, it was not at first completely clear what to choose. The proposed choices were :
    BlazeDS
    ColdFusion
    HTTP
    LCDS
    PHP
    Web Service
    XML
    Since all others choices, when tried, declared to be unconsistent with my project's server type, I finally selected "Web Service".
    In the next wizard's form, according to the Test Drive indications, I specified the URI of my EmployeeService class : C:\Program Files\Apache Software Foundation\Tomcat 6.0\webapps\testdrive\WEB-INF\classes\services\EmployeeService.class
    That defined correctly the other fields.
    But when pressing the "Next >" button, Flash Builder issued the following error message :
    English translation : Unable to extract operations and entities from specified WSDL. Reason : an error occured while instrospecting the service.
    And the full error text is :
    An error occured while instrospecting the service. WSDLException: faultCode=PARSER_ERROR: Problem parsing 'file:/C:/Program%20Files/Apache%20Software%20Foundation/Tomcat%206.0/webapps/testdrive/W EB-INF/classes/services/EmployeeService.class'.: com.sun.org.apache.xerces.internal.impl.io.MalformedByteSequenceException: Invalid byte 2 of 2-byte UTF-8 sequence.
    It is usually relatively easy to find fixes through Google searches, but this time, it didn't work. So here I am, expecting a bunch of wise answers from all the nice Flex / FB gurus that I'm sure haunt this forum .
    Thanks and best regards.
    Marc.

    For those who would have the same problem, here is how I could eventually fix it.
    Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
    Entry point :
    http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
    As suggested, I used the New Project wizard to create a new project, with :
    Application server type : J2EE
    Check the radio button "Use remote object access service : BlazeDS"
    Then, as indicated in following pages (section "Accessing BlazeDS")... :
    file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
    ...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
    There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
    Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
    Very nice product anyway, so far, congratulations...
    Rgds
    Marc.

  • Connection between SDM client and server is broken

    Dear All,
    First of all this is what I have
    -NW04 SPS 17
    -NWDS Version: 7.0.09 Build id: 200608262203
    -using VPN connection
    -telnet on port 57018 is succesfull
    I can login to SDM server (from NWDS and from SDM GUI) I can see the state of SDM(green light), restart it, can navigate through tabs in GUI, but every time I am trying to deploy an ear i have this error:
    Deployment exception : Filetransfer failed: Error received from server: Connection between SDM client and server is broken
    Inner exception was :
    Filetransfer failed: Error received from server: Connection between SDM client and server is broken
    I have already read a lot of topics,blogs,notes but didn't find the solution.
    Can anybody help me?
    Best Regards

    Having same issue. Nothing helped so far... Using NWDS 7.0 SP18.
    I have turned SDM tracing on and this is what I see on client side after sending first data package:
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/17 Client: finished sending string part"
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/0 Client: receive String part from Server"
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl.receiveFromServer(NetComm ..): Entering method
    com.sap.bc.cts.tp.net.NetComm.receive(): Entering method
    com.sap.bc.cts.tp.net.NetComm: debug "Method "receive(char[])" could not read all requested bytes. There are still 12 bytes to read"
    com.sap.bc.cts.tp.net.NetComm: debug "Caught IOException during read of header bytes (-1,          43):Connection reset"
    com.sap.bc.cts.tp.net.NetComm: debug "  throwing IOException(net.id_000001)"
    com.sap.bc.cts.tp.net.NetComm.receive(): Exiting method
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/1 Client: connection was broken"
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/0 Client: finshed sendAndReceive"
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
    My connection on server is still active so I have to restart SDM server to reset and try it again.
    Anyone have idea whats happening?
    Edited by: skyrma on Feb 24, 2012 2:46 PM
    Edited by: skyrma on Feb 24, 2012 2:47 PM
    Edited by: skyrma on Feb 24, 2012 2:47 PM

  • (Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

    Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
    I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
    Let me know if you know why this is happening.

    With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
    Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
    While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
    I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
    You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
    Something you can try:
    System Preferences -> Network
    Gear icon on the bottom left, next to the [+] [-] icons.
    Select *Set Service Order...*
    Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
    NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

  • How to set up internet connection between MacBook Pro and an old eMac?

    I got an old eMac without wifi and a MacBook Pro. I'd like to share the network connection via ethernet cable to my eMac, but I can't get it work.
    I'd like to use it with screenrecycler and it needs a network connection.
    How to do it? How to set up the connection between the client and the host? Could somebedy give me a step by step guide?
    Thank you very much

    Hello,
    First, are you using Wifi for Internet on the MBP?
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list, Wifi on the MBP.
    In Shating on both, enable File Sharing, Screen Sharing, & Web Sharing on both.
    Then with the Ethernet cable between the two, find the IPs of both, or use Finder>Go>Connect to Server>Browse... see what shows up.

  • Impossible to use "Connect to Data/Service" with BlazeDS

    Hi everybody, I'm work on FB4 since 3 weeks, but I have big problem to use "Connect to Data/Service" with BlazeDS.  each time I try to use it, it's the same question " You must define a BlazeDS server" and when I define the BlazeDS server and .war, I have the question again... You must define a BlazeDS server
    I work on Mac OsX Leopard and his java 6.
    Thanks for your help

    Hi,
    Thanks for your feedback
    Can you please tell us which version of Flash Builder4 and BlazeDS you are using.?
    Also, can you try the same workflow by using the turnkey version of BlazeDS(4.0.0.11428) with Flash Builder BETA2 build.
    Please let us know the outcome.
    Thanks,
    Balaji
    http://balajisridhar.wordpress.com

  • Problem connecting to Data/Service outside web root

    I'm new to Flash Builder (4.5). I work in an environment where developers have full access to a specified folder and subfolders on a Windows box running IIS 7 and ColdFusion 9.
    So the path to the services-config.xml looks like this (server and folder names have been changed, but the structure is the same):
    \\servername\flex$
    Path to coldfusion root looks like this
    \\servername\coldfusion9$
    The developers don't have write access to those areas. What we have is
    \\servername\webteam$\webcontent\app1
    \\servername\webteam$\webcontent\app2
    And so on
    Then our server admin sets up virtual servers so that our urls look like http://app1.ourdomain.co, app2.ourdomain.com, etc. 
    I set up a project specifying ColdFusion as the server technology and using the above paths and everything works 
    I've run set up a couple Hello World tests using <mx:RemoteObject destination="ColdFusion" source="app1.flextest"></mx:RemoteObject> and everything works as expected. (No database connections, just a function that returns a string) 
    The problem is when I try to exploit the magic of Flash Builder and use the Connect to Data Service feature to write my queries for me : ) 
    I select ColdFusion 
    In the CFC location I enter 
    \\servername \webteam$\webcontent\app1\cpa\flextest.cfc 
    Which is the same working cfc I connected to manually in my Hello World test. Flash Builder automatically populates the Service Name, Service Package, and Data Type Packages and I click next. I enter my RDS password and I then get this error: 
    The CFC file is invalid. Possible causes can be found by accessing: http://app1.ourdomain.com//CFIDE/componentutils/cfcexplorer.cfc?method=getCFCMetaData&name =flextest&path=%2Fwebcontent%2Fapp1%2Fflextest.cfc 
    Copying and pasting the url into my browser I get this error: 
    The value returned from the getCFCMetaData function is not of type struct. 
    HOWEVER, if I modify the url and remove "%2Fwebcontent%2Fapp1%" I get a response: 
    E:\webteam\webcontent\app1\flextest.cfcE:\ColdFusion9\wwwroot\WEB-INF\cftags\component.cfc WEB-INF.cftags.componentWEB-INF.cftags.componentcomponentcpa.flextestcpa.flextestcomponent remoteflexteststring 
    So I just need to tell Flash Builder to shorten the path and not add "/webcontent/app1" How? 
    Sorry it took so long to explain. I've been googling for days and can't find anything. I'm sure there must be other users who develop on servers outside the root path of their web server, right? 
    P.S. I tried mapping drives but that didn't help
    Thanks,
    Ron
    "Embrace the senile genius"

    Hi ,
        Check if the database server is up and running.The console will have two root nodes .R they both in green?
    Try connecting and entering into the database externally.
    Generally if the DB instance is not running , this error would occur.
    regards,
    aravindh.

  • Flash Builder 4 connect to Data/Service

    I am attempting to connect Flash Builder projects to a custom AMF server using the connect to Data/Service tool.
    I am able to successfully connect to the server and create a service connection. Flash Builder creates a service but
    does not recognize any operations. I believe this is because the server is not responding correctly to the Flex Introspect request.
    I am sending an AMF package back to Flash that looks like this:
                \c@\c@\c@\c@\c@\cA\c@\c@\c@\cB/0ÿÿÿÿ\cJ\c@\c@\c@\cA\cB\c@\cIgetPeople or
    in HEX 00 00 00 00 00 01 00 00 00 02 FF FF FF FF 0A 00 00 00 01 02 00 09 "getPeople"
    Can someone please provide any documentation on the format required for this response?
    Thanks in advance

    I am attempting to connect Flash Builder projects to a custom AMF server using the connect to Data/Service tool.
    I am able to successfully connect to the server and create a service connection. Flash Builder creates a service but
    does not recognize any operations. I believe this is because the server is not responding correctly to the Flex Introspect request.
    I am sending an AMF package back to Flash that looks like this:
                \c@\c@\c@\c@\c@\cA\c@\c@\c@\cB/0ÿÿÿÿ\cJ\c@\c@\c@\cA\cB\c@\cIgetPeople or
    in HEX 00 00 00 00 00 01 00 00 00 02 FF FF FF FF 0A 00 00 00 01 02 00 09 "getPeople"
    Can someone please provide any documentation on the format required for this response?
    Thanks in advance

  • Connectivity between Oracle database and client...

    Hi guys,
    I was asked to make a connection between oracle client and database via internet so that our clients can access the database from different parts of the country, and the data that is transmitted in the internet does not require security consideration. And I have successfully implemented this.
    But later onwards they asked me to structure it in such a way so that clients must be able to select, insert, update and delete data offline, in case there is online connectivity problem.
    So my question is, are there any possibilities in oracle to temporarily store data that are available in the oracle database to the client side and then later onwards transfer those datas once the clients are available online. Or are there any other alternative ways...
    Additional Information - Client access the database through an application created by VB.
    Please do help me on this project.
    Thanks in advance for your help.
    Asif.

    user11000521 wrote:
    Hi guys,
    I was asked to make a connection between oracle client and database via internet so that our clients can access the database from different parts of the country, and the data that is transmitted in the internet does not require security consideration. And I have successfully implemented this.
    But later onwards they asked me to structure it in such a way so that clients must be able to select, insert, update and delete data offline, in case there is online connectivity problem.
    So my question is, are there any possibilities in oracle to temporarily store data that are available in the oracle database to the client side and then later onwards transfer those datas once the clients are available online. Or are there any other alternative ways...
    Additional Information - Client access the database through an application created by VB.
    Please do help me on this project.
    Thanks in advance for your help.
    Asif.You probably should do a cost/risk analysis. Where you are headed might be able to be done (but it will require that the "clients" also have their own copy of the database) but it won't be easy and it certainly won't be cheap, either in initial implementation or in on-going maintenance. The alternative is to take a hard look at your network connections and see if it wouldn't be cheaper/easier to be able to ensure that it is reliable. Remember "the internet" won't break, it is highly redundant. If you have connectivity issues, they will almost certainly be in your own equipment and configurations, so your (your organization) will have the ability to address and fix any issues there.

Maybe you are looking for