Connection between fmsedge and apache with http tunneling

I configured my FMS for listening on port 80 and redirect non-FMS requests to apache on port 8080 in the same server machine.
It works well, but I've noticed several tcp connections from fmsedge to apache in Established status (it is simple to see through "netstat -nap | grep 8080" command) that stay forever (until FMS stop or restart).
With a sniffer capture I seen that sometime the fmsedge requests to apache a tcp connection but it (fmsedge) doesn't use this connection. Then the apache server send a syn,ack tcp request and always fmsedge send a dup ack tcp response. So, the connection is active but not used, then apache doesn't close it.
The kind of requests for apache are http get to js or php files.
I don't understand why fmsedge create these connections.
Am I misteking some configuration? Or may be it is a bug of fmsedge? Anybody have the same problem? Anybody can help me?

This is causing an issue for us: after a litle time, the server is blocked because too many connection are established. Any other new request to the service is not accepted and it is necessary to restart the server to resolve, but this action of course close all the active connection...

Similar Messages

How do I fix bluetooth connection between mouse and keyboard with iMac. iPhone won't connect to bluetooth either

Bluetooth on Mac os x won't work with keyboard, mouse or iphone. Keyboard and mouse both have new batteries and go discoverable when switched on, i have gone into system setup and tried connecting. It connects briefly with mouse then drops in and out of connection, keyboard does same, asking for passcode then no connection. I'm lost... my phone can pick up keyboard, so i think it is bluetooth in mac.

Go to ~/LIbrary/Preferences
Move the com.apple.Bluetooth.plist file to the Trash.
Restart your Mac.
Try re "pairing" the keyboard.
~ (Tilde) character represents the Home folder.
For Lion: To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library

Connection between Portal and MDM

Hi all
Can anybody help me on how to establish the connection between portal and MDM with step by step procedure.
i am new to this combination .
before i worked with portal but not worked with MDM .
Regards
Suresh babu

Hello Suresh,
As of my knowledge MDM IViews have the advantage to ful fil your neeed to provide connectivity moreover,that they are not complex in structure and are therefore not restricted by any underlying schema structure. As opposed to regular iViews in other systems which are embedded into the pages on which they appear, MDM iViews are more generic and granular in nature enabling their placement on a page to be more adaptable.
The SAP Enterprise Portal (SAP EP) offers templates for creating the iViews. The following are some examples of these templates available at the link:
[http://help.sap.com/saphelp_mdm550/helpdata/en/45/c9f8cac2124ebee10000000a11466f/content.htm]
Procedure:
       1.      Create a new page using the page wizard.
       2.      To see the iViews you created on the new page, you need to link them to the page. Right-click each of the iViews that you created and from the context menu, select Add iView to Page → Delta Link
       3.      Double-click the new page you created and select:
Page Content to view a list of the iViews that have been linked to this page
Page Layout to view the layout currently assigned to this page. The iViews can be rearranged using the drag&drop function.
       4.      The visual structure of a page can be changed with the Page Layout function. Select Define Layout to reset the layout of the page.
       5.      Select Preview to view the page showing how the iViews have been arranged. The preview simulates what an end user sees at runtime.
Detailed pictorial presentation available at:
[http://help.sap.com/saphelp_mdm550/helpdata/en/45/c8e2fa5f0c2e97e10000000a155369/content.htm]
Hope you will find it helpful.
Regards,
Krutarth

Frustration! I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen???

I live in Japan,
I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen??

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

HTTP type connectivity between XI and R3 - load balancing options ?

Hi
We have a http type connectivity setup between XI and R3 in order enable XI to communicate with R3 using ABAP proxies. We did this by creating a RFC destination on the ABAP stack of XI of type 'H' ( http connection between R3 systems ). Now, while setting up this rfc destination, there is no option to specify a message server on R3 - we just see a target server field that can be filled in.
In an rfc destination of type 3 - on the XI box ( which is used for a XI --> R3 idoc adapter ) , I can see an option for specifying message server.
Does this mean that using type 'H' connectivity between XI and R3 does not give us an option of hitting the load balancing - message server on R3 and thus cannot use the load balancing setup on R3 ? Is this is a limitation of type 'H' connectivity between XI and R3 ?

for HTTP load balancing the options seems to be somewhat different....check if these threads provide you any help:
http://help.sap.com/saphelp_nw04s/helpdata/en/ae/9bfc3f9ec4e669e10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/79/a1ce9569444647956b0ec1cf443c4d/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/43/39c7b227b91bcbe10000000a1553f7/content.htm
Regards,
Abhishek.

Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

No connection between iPhone and computer

I have No connection between iPhone and computer. Please help me. My iPhone (4s) went nuts a little while ago. Nothing happend when I connected the charger. I had to take out and put it back in again and again and again, between 2-10 times before the charger finally was connected. It's been like this for a while now and a did'nt really have that mutch problem with it. Until today when I tried to sync/backup/restore the whole phone. It started to sync but stoped at the sync of the 5:th app. tried to start over but now my computer can't "find" the phone. It says that the USB-device is not reconizeble.
Please help me.
Sorry for the bad english.

See Here...
Device Not Recognised
http://support.apple.com/kb/TS1538
And Here
iPhone, iPad, or iPod touch not appearing in iTunes
iPod appears in Windows but not in iTunes
Also, Here...
Unable to Update or Restore
http://support.apple.com/kb/HT1808

Solution for connection between BODS and WCF web service ?

Hi,
we have a unique requirement of connecting BODS to WCF webservice. This web service acts as a layer for connection between proprietary databases (secured) and other external systems. Queries are to be sent to this web service in order to fetch data from proprietary databases.
In order to connect to these web services, we should also provide Address, Binding and contract whose details are already present with us.
Example of web service address: net.tcp://op12345:10101/sd
I heard Adapters are the best way of connecting to the above web service, could you please provide some guidance on connecting through adapters if it is the best solution.
Could someone suggest the best possible approach(ASAP) to bring connection between BODS and web services and to execute the above requirement.
Please let me know in case of any more information.
Regards
Surya

Hello Nir,
I tried to import the my VS2008 + .net 3.5 as Wsdl local file to the Xcelsius 2008 but there is message unable to load url.
I tried to import your Wsdl developed by .net:
http://www.webservicex.net/airport.asmx?WSDL
and it works ok.
Can you send me or print here the service class definition and the configuration file for http://www.webservicex.net/airport.asmx?WSDL?
Thanks in advance,
Sergey Osmachkin

Live/realtime connection between WebI and Xcelsius

Hi,
is it possible to have some kind of a live connection between WebI and Xcelsius for the following scenario...
I need to have my WebI report made availabe as an Xcelsius Dashboard and when I filter a value in the dashboard it should also get filtered in the WebI report. Is this possible and if so then how?
Pls help.
Thanks,
SD
Edited by: Sebastian D'Souza on Feb 22, 2011 11:39 AM

Hi Sebastian,
Yes this is very possible. Of the three connection methods (QaaWS, Live Office, BI Services) I would recommend BI Services for flexibility, speed to set up, and speed for query refresh times.
Check out this post for a step-by-step guide http://blog.davidg.com.au/2011/03/drill-down-in-xcelsius-using-bi.html
And refer to the Webi Rich Client guide in the section "Sharing Web Intelligence content with other Web applications" for the full details of how this works.
Hope this helps.

Need to establish Connection between CRM and   Virtual Directories.

Dear All,
I am working for Telecom project.
I have one requirement that we need to establish Connection between CRM and   Virtual Directories.
This is existing in Access management system.( SAP EP environment )
The basic requirement is, with SAP EP environment we are integrating 8 different application. But for all this Application we have a one more system called Access management system (like Basis in Sap). This will validate the user access and BP(Business Partner ) data for users who logon to a different respective application. For all this applications Company data (Master Data) has to provide from CRM and the changes took place for Company data in CRM will be updated in to Virtual Directories .For this service we need to establish Delta mode connection between SAP CRM and Virtual Directories.
Which is existing in Access management system .
   Do we have any standard connectors from SAP CRM to connect and who we can achieve this .
Please let us know..Certainly there will be a reward points
Thanks & regards.
BNP

Try posting this question on the BPA Suite forum - http://forums.oracle.com/forums/category.jspa?categoryID=194

Handoff: No connection between iPad and iPhone

Handoff: No connection between iPad and iPhone (IOS 8).

Hi raydela,
I understand your calls aren't being transferred between devices.
Check out the troubleshooting in this article.
Get help using Continuity with iOS 8
If a call doesn't transfer to your other devices, or you don't see the Handoff icons
Make sure that your devices are using iOS 8 or later by going to Settings > General > Software Update.
Check your settings:
Go to Settings > Wi-Fi and turn on Wi-Fi if necessary.
Go to Settings > Bluetooth and turn on Bluetooth if necessary.
Make sure your iOS devices are connected to the same Wi-Fi network by going to Settings > Wi-Fi and comparing the name of the network each is on.
Go to Settings > General > Handoff & Suggested Apps and turn on Handoff.
Go to Settings > Phone and turn off Wi-Fi Calling.
Best Regards,
Nubz

Bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?

bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?
I'm trying to use the iphone as a remote with keynote, which again worked before the upgrade

Hi russellpaton,
Thanks for visiting Apple Support Communities.
If your iOS devices are not communicating with each other after updating to iOS 8, the troubleshooting steps in this article can help resolve this sitation as well:
If you can’t use a Bluetooth accessory or car kit
Cheers,
Jeremy

ABAP Proxy connection Between PI and SRM for XMLs

Hello Experts,
We are trying to set up ABAP proxy connection between PI 7.1 and SRM so we can send XML from SRM into PI.
Our SRM developer is getting an SLD error (below) and seems like something is not set up right in the SLD. Could you help me out with any kind of blog/documention on setting up an ABAP proxy connection between PI and an ABAP system. Something that talks about what steps we need to take in PI and SRM.
error ...
*We saw the error during debugging. This error is preventing XML output
to be sent to PI.
BBP_BD 002 An SLD system has not been assigned to logical system
Thanks,
Mayur

Thanks all for a quick reply. I also had to take following step to achieve the task.
adding the XI system to the SRM config - SRM Server -->
Technical basic Settings --> Define System Landscape? (also please
associated documentation in that link for XI)
Thanks,
Mayur

Error while creating connection between Java and ABAP

Experts
I am getting the following error message when I am trying to test the connection between JAVA and ABAP systems.
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (s09f71v06.svr.bankone.net:8100)
5. The host name s09f71v06.svr.bankone.net was resolved successfully.
6. The server s09f71v06.svr.bankone.net *could not be pinged* successfully.
I have JAVA and ABAP on the same system. I am trying to establish a connection. I have checked all the settings and they looks fine. I have also pinged from other system to this server and the Ping works fine.
Please do let m eknow where do I need to check for the errros or logs for the above error message.
Appreciate your quick help.
Mahesh

Check the relevant services are test are active on the Backend system through SICF trransaction.
Also make sure that default icm services are running.See note 517484.
More important the connector test in the portal system should work properly,recheck the WAS path etc are correct.
Regards
Ajay

JCo connection between java and ABAP

Hi,
Any pointers for some good material on establishing JCo connection between ABAP and Java to execute ABAP FMs.
Thanks and Regards
Arpita Saxena

Please find following link for your reference.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/85a483cb-0d01-0010-2990-c5168f01ce8a?quicklink=index&overridelayout=true]

Connection between fmsedge and apache with http tunneling

Similar Messages

Maybe you are looking for