Connection between IS-Oil and IS-Banking

i need some help on what to do to communicate between IS-Oil and IS-Banking. my data is in is-oil and i need it to do a transaction in is-banking if i can use rfc what set up do i need to do to make it work or there are others that i can do. i appreciate your help thanks in advance.

You can have the communication between the two systems either by using RFC's or IDOC's. For both, you will have to create a RFC destination in SM59 transaction, usually done by the BASIS consultants.
Once that is done you call a remote enabled function from the other system, while specifying the destination of the function, which is the name of the RFC dest, that you created in SM59.
For IDOC scenarios, take a look at this blog.
/people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide
Regards,
Ravi
Note : Please mark all the helpful answers

Similar Messages

Connection between SDM client and server is broken

Dear All,
First of all this is what I have
-NW04 SPS 17
-NWDS Version: 7.0.09 Build id: 200608262203
-using VPN connection
-telnet on port 57018 is succesfull
I can login to SDM server (from NWDS and from SDM GUI) I can see the state of SDM(green light), restart it, can navigate through tabs in GUI, but every time I am trying to deploy an ear i have this error:
Deployment exception : Filetransfer failed: Error received from server: Connection between SDM client and server is broken
Inner exception was :
Filetransfer failed: Error received from server: Connection between SDM client and server is broken
I have already read a lot of topics,blogs,notes but didn't find the solution.
Can anybody help me?
Best Regards

Having same issue. Nothing helped so far... Using NWDS 7.0 SP18.
I have turned SDM tracing on and this is what I see on client side after sending first data package:
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/17 Client: finished sending string part"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/0 Client: receive String part from Server"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl.receiveFromServer(NetComm ..): Entering method
com.sap.bc.cts.tp.net.NetComm.receive(): Entering method
com.sap.bc.cts.tp.net.NetComm: debug "Method "receive(char[])" could not read all requested bytes. There are still 12 bytes to read"
com.sap.bc.cts.tp.net.NetComm: debug "Caught IOException during read of header bytes (-1, 43):Connection reset"
com.sap.bc.cts.tp.net.NetComm: debug " throwing IOException(net.id_000001)"
com.sap.bc.cts.tp.net.NetComm.receive(): Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/1 Client: connection was broken"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/0 Client: finshed sendAndReceive"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
My connection on server is still active so I have to restart SDM server to reset and try it again.
Anyone have idea whats happening?
Edited by: skyrma on Feb 24, 2012 2:46 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

Can't establish wireless connection between the printer and computer.

I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you.
I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
When you say; 'I reset the printer to factory settings', how where you trying to do this?
I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
"I've checked to make sure both computer and printer are on the same network." Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads
To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues. HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer. I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer Please let me know if any of these steps resolved your issue, or the details of what happened. I look forward to hearing from you, hopefully with good news! Thanks,

"USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2

Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM)

No connection between wireless keyboard and IMac

I had to change batteries in my wireless keyboard for my Imac. After that I did not manage to reestablish the connection between the keyboard and the machine. I did not manage to get the blue tooth going again before I went to bed and the session timed out , my IMac is now locked and since my keyboard does not work I am not able to type the password. How can I solve this?

Are the batteries installed properly? Have you tried other batteries?
Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
Plan B: It's a good idea to keep a wired keyboard as a standby. Suggest that you get hold of one.

No connection between EIS Server and EIS Console

Hi AllWhile saving a meta model I get this error message:"There is currently no connection between the console and intgeration server. Ensure the server is running and try reconnecting"I have checked properly that EIS server is installed and also running, but don't know why throwing this errors...I am unable to save the metamodel....any suggestions ?Thanks in advance !

Any Help on this please!!!

How to set up internet connection between MacBook Pro and an old eMac?

I got an old eMac without wifi and a MacBook Pro. I'd like to share the network connection via ethernet cable to my eMac, but I can't get it work.
I'd like to use it with screenrecycler and it needs a network connection.
How to do it? How to set up the connection between the client and the host? Could somebedy give me a step by step guide?
Thank you very much

Hello,
First, are you using Wifi for Internet on the MBP?
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list, Wifi on the MBP.
In Shating on both, enable File Sharing, Screen Sharing, & Web Sharing on both.
Then with the Ethernet cable between the two, find the IPs of both, or use Finder>Go>Connect to Server>Browse... see what shows up.

How to test the connection between DSD backend and DSD connector

Dear all,
I am configuring the MDSD scenario .. and i want to insure that my customization is correct
How to test the connection between DSD Backend and DSD connector ??

Hi Viren,
The problem is:
We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
Thanks,
RPK.

Connection between MacBook Air and iphone 3gs through a hub isn't good

Several times the connection between my computer and iphone has stopped or cancelled saying that the iphone had been disconnected. But nothing had been touched! Why?

Hey,
Plug the iPhone directly into the MBA. If your going to use a hub make sure it's a powered hub, the hub itself should have it's own power cord. If it's powered by the USB port then your going to have issues.
Hope it helps
Post the results :-D

Connectivity between Oracle database and client...

Hi guys,
I was asked to make a connection between oracle client and database via internet so that our clients can access the database from different parts of the country, and the data that is transmitted in the internet does not require security consideration. And I have successfully implemented this.
But later onwards they asked me to structure it in such a way so that clients must be able to select, insert, update and delete data offline, in case there is online connectivity problem.
So my question is, are there any possibilities in oracle to temporarily store data that are available in the oracle database to the client side and then later onwards transfer those datas once the clients are available online. Or are there any other alternative ways...
Additional Information - Client access the database through an application created by VB.
Please do help me on this project.
Thanks in advance for your help.
Asif.

user11000521 wrote:
Hi guys,
I was asked to make a connection between oracle client and database via internet so that our clients can access the database from different parts of the country, and the data that is transmitted in the internet does not require security consideration. And I have successfully implemented this.
But later onwards they asked me to structure it in such a way so that clients must be able to select, insert, update and delete data offline, in case there is online connectivity problem.
So my question is, are there any possibilities in oracle to temporarily store data that are available in the oracle database to the client side and then later onwards transfer those datas once the clients are available online. Or are there any other alternative ways...
Additional Information - Client access the database through an application created by VB.
Please do help me on this project.
Thanks in advance for your help.
Asif.You probably should do a cost/risk analysis. Where you are headed might be able to be done (but it will require that the "clients" also have their own copy of the database) but it won't be easy and it certainly won't be cheap, either in initial implementation or in on-going maintenance. The alternative is to take a hard look at your network connections and see if it wouldn't be cheaper/easier to be able to ensure that it is reliable. Remember "the internet" won't break, it is highly redundant. If you have connectivity issues, they will almost certainly be in your own equipment and configurations, so your (your organization) will have the ability to address and fix any issues there.

Connection between Crystal Report and SAP ECC

Hi. can you help me please.
I'm testing the connection between Crystal Report and SAP ECC. I tried using the tables,
but by making the links between foreign keys does not bring data. The other way I tried was using an ABAP function module,
but using this way, Crystal will only works like a Presentation Layer because all the work was did it in ABAP;
besides that shows the limitation that I can not pass as input a table.
what is the best practice for reporting on SAP ECC using Crystal Report?
Thanks.

Hi,
Crystal Reports is able to leverage tables, ABAP functions, SAP query and InfoSets.
what is the issue when using the tables ?
ingo

Connectivity between r/3 and bw

Hi
how do i check if the connectivity between r/3 and bw is established or not.
plz provide me steps, i m unable to find out if r/3 to bw connection is working fine or not
because though i am replicating the datasources from r/3 to bw, i cannot view the datasource in bw
for the first time
Regards

hello,
right click on the source system and select check.
If it is connected..it will say connection is ok.
or
in teh R/3 system,run T-Code sm59.
In ABAP connections, select your BI server and check for connection.
Reagrds,
dhanya

Connection between data services and BWA

Hi,
I want to make a connection between Data Services 3.2 and BWA. Since we use RFC connection in between in order to have them talk with eachother but i wonder if there is any documentation that describes the RFC connection and configuration required particularly in this scenario. I have gone through the documentation that explains RFC connection between Data Services and BW and what configuration we have to do, so i wonder if there are any functions we have to export to BWA from Data Services like we do in case of BW connection to Data Services or some specific configuration we have to do. If someone help who has done connection between Data Services and BWA can help or if somebody can provide documentaton on it.

Hi,
You should ask this question over here: http://scn.sap.com/community/data-services
Regards,
H

How can i make a connection between an application and a database over net

dear sir
how can i make connection between an appliction and a database over internet while the client side appliction is behind proxy and firewall
for example how the live update of norton antivirus makes connection to the data server to make comparetions and get new virus definitions
does that depend on sockets technology ?
what references can guide me to the solution please?

The ability to do so depends entirely on the JDBC driver implementation having some proxy method. It needs to recognize the HTTP or SOCKS proxy and use them to connect, and the firewall and proxy need to allow those specific port connections.
To the best of my knowledge, all of these update utilities, e.g. live update for Netscape, Norton, etc., do not connect directly to the database. As it is, no sane security person would allow a database to be exposed to the Net. Rather, they connect using HTTP or HTTPS, which normally traverses firewalls just fine, to connect to a Web or application server on the far end. That application server then parses the request and retrieves whatever it needs to from the database.
In other words, you cannot have a 2-tier client/server application. You need a 3-tier application:
your client -> Web/app server -> database
where the connection from your client to the Web/app server is over http or https through the firewall and proxies.
Hope this helps.
Avi
dear sir
how can i make connection between an appliction and a
database over internet while the client side
appliction is behind proxy and firewall
for example how the live update of norton antivirus
makes connection to the data server to make
comparetions and get new virus definitions
does that depend on sockets technology ?
what references can guide me to the solution please?

Connection between IS-Oil and IS-Banking

Similar Messages

Maybe you are looking for