Connection between multiple domains of AD and OIM

I am trying to integrate OIM and AD (target resource) and I have 13 domains in AD. For one domain, connection between AD and OIM is established using OOTB connector.
Can someone provide me approach for connection between multiple domains of AD and OIM.
Do I need to install different connector server for different domains or OIM provides with some Connector Server cloning feature.

Hi,
this forum is for asking and answering JDeveloper and ADF related question. Your question should be asked to the FMW security forum here on OTN
Frank

Similar Messages

  • Wireless connection between D-Link WiFi router and Time capsule stopped working

    We have an ISP provided D-Link wireless router (DIR-615) to which we wirelessly connected our 2Tb Time Capsule for back up and to connect a USB printer to out network. This worked perfectly for 3 1/2 years, until about a month ago, when the time capsule suddenly decided to go "off line". ie we could no longer access it or the printer via our wireless network. We had changed nothing - just one day it stopped working.
    We tried to get it back online with no success. As the 2Tb Time Capsule was almost 7 years old and had had some HDD issues in the passed, we figured it had got old and died and that it was time to replace it; so we bought a new 3Tb Time Capsule, thinking this would get everything back to normal.
    However much as we tried, we were also unable to get the new 3Tb Time Capsule to connect wirelessly to the D-Link wireless router. The Airport Utility did not show the D-Link wireless router or its wireless network, although we were (and are) able to see it in Systems Preferences>Networks from all our multiple devises. This in itself seemed odd. No matter what we tried, the Airport Utility would not find the D-Link wireless router and hence we could not add the 3Tb Time Capsule to the existing wireless network.
    At the end of the day we got fed up with trying to add the 3Tb Time Capsule to the D-Link wireless network, and connected it via a LAN cable to the D-Link router instead. We then set it up as its own network. Worked gerat. Having done that we thought maybe the old 2Tb Time Capsule might not have been the problem after all, so we tried extending our new 3Tb Time Capsule wireless network using the 2Tb Time Capsule wirelessly. This worked perfectly! And we are now almost back to what we wanted.
    So although we have a work around, this means now have 2 separate wireless networks as opposed to the original single wireless network where everything talked to everything else.
    Can anyone shed any light on any of the following:-
    1. Why the original wireless network connection between the D-Link router and the 2Tb Time Capsule just stopped working? Was there some software change from Apple that "decided" D-Link wireless routers were no longer secure; and therefore the TCs could no longer connect to them?
    2. Why it was not possible to extend the existing D-Link wireless network using the the new 3Tb Time Capsule?
    3. Is there is anyway that we can get back to a single wireless network based around the D-Link wireless router as the primary router connecting to the modem, where the 2 Time Capsules connect as "wireless satellite base stations"?

    1. Why the original wireless network connection between the D-Link router and the 2Tb Time Capsule just stopped working? Was there some software change from Apple that "decided" D-Link wireless routers were no longer secure; and therefore the TCs could no longer connect to them?
    A firmware update to the TC came along and you agreed to it without perhaps even noticing.. it then smashed your setup because Apple do not recommend the setup you were using and it is very poor.
    2. Why it was not possible to extend the existing D-Link wireless network using the the new 3Tb Time Capsule?
    Because it is such a poor setup that Apple have taken away your ability to choose it unless you know exactly what you are doing.
    3. Is there is anyway that we can get back to a single wireless network based around the D-Link wireless router as the primary router connecting to the modem, where the 2 Time Capsules connect as "wireless satellite base stations"?
    Yes, this I can help you with.
    I have several ways around the problem.. but the first one is.. why use the DIR-615 at all.. it is not a modem.. it is a very ordinary bottom end, poor single band slow wireless router.
    Why don't you simply remove the DIR-615 from the network completely.. plug whatever it is the ISP supplies you.. an ethernet connection from whatever that modem is you mentioned into the WAN port of the Time Capsule. And use the TC in some router mode.. same as the DIR-615 was setup.. dhcp or pppoe or whatever.. I doubt the TC cannot match it.
    If you have issues please post a few screenshots from the DIR-615 to show how it is setup from the WAN side.. and as long as you are given the username and password or whatever the ISP uses to authenticate then chuck out the DIR-615.
    Tell me if that is a goer.. if not we can work out a few other methods..
    eg. Simply turn off the wireless in the DIR-615. It is poor cf the TC and there is no need for it.. with the TC in bridge only use the TC for wireless as well as wireless extend with your old TC.
    Or setup roaming network where everything uses the same SSID.
    Then you will have one wireless network. And it won't matter what as long as it connects.. although IMHO this is not right as the TC is such a superior router now you are wasting your new TC.

  • SSO Connection Between Netweaver CE 7.2 and MDM 7.1

    Hi ,
    I am trying to set up SSO connection between Netweaver CE 7.2 and MDM 7.1 systems in our landscape.
    But Iam not finding the MDM template in Netweaver CE to create the MDM system in System configuration tab of CE.
    Please help me on how to go about to create the SSO connection between CE and MDM system.
    Regards,
    Anand V

    Hi Shiv,
    The MDM content business package  MDM JAVA WD FRAMEWORK 7.1 7.11 and  MDM WEB SERVICES_RT 7.1 7.11 based on Note 1471326 have been Installed on CE but the restart was not taken.
    Is the frestart necessary to get the MDM template?
    Regards,
    Anand V

  • The connection between my iMac (8.1) and Airport express keeps dropping out all the time., The connection between my iMac (8.1) and Airport express keeps dropping out all the time.

    The connection between my iMac (8.1) and Airport express keeps dropping out all the time., The connection between my iMac (8.1) and Airport express keeps dropping out all the time.

    Hi BillCilla,
    If you are having intermittent but persistent drops in AirTunes via your AirPort Express, you may find the following article helpful:
    Apple Support: AirTunes audio stream drops or cuts out
    http://support.apple.com/kb/ta21538
    Regards,
    - Brenden

  • Log Shipping between multiple domains

    Lets talk about a scenario and would appreciate any inputs in this regard. 
    Scenario - Lets say I have 3 domains
    x.contoso.com
    y.contoso.com
    z.contoso.com
    I'm allowed to do Log Shipping from x.contoso.com to y.contoso.com, however there is a requirement to have the same data made available to servers residing on z.contoso.com.
    Connectivity between x.contoso.com and z.contoso.com is not permitted, so configuring log shipping with multiple targets is not possible.
    y.contoso.com and z.contoso.com can talk to each other, so what is the most efficient way to move data from y to z.
    Any suggestions on this particular scenario is greatly appreciated.
    Thank you,
    Anup

    Y will be the secondary server. I can probably think of pushing the log backups from Y to Z and do a restore there. There will be lot of moving parts, however the whole thing can be scripted out(I hope).
    Yes you can script out and can create your own job. But if it is just a data you want to move and your table has timestamp column you can move data from Y to Z using SSIS packages by filtering on time.
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • How can i connect between WS−G5484 1000BASE−SX and GLC-LH-SMD ?

    Dear experts,
    My customer has 6509 A-side and B-side core switches and need to migrate only 6509 B-side to Nexus.
    I have some question below.
    1. Customer's 6509A-side has multiple WS−G5484 1000BASE−SX and WS−G5486 1000BASE−LX links and it is connected to 6509B-side.
    But customer bought only GLC-LH-SMD for Nexus migration of 6509B-side.
    I understood BLC-LH-SMD doesn't support SX type, so I am worndering how i can connect between 2 different module ?
    Or should i have GLC-SX-MMD for WS−G5484 1000BASE−SX links ?
    2. Current Rack has LC type patch pannel from B-side to Rack A side.
    But new Nexus A-side rack is located at different row and between these rack, there is only sc-type patch pannel.
    So If i want to connect from LC-type to Sc-type patch pannel, how can i connect ? do i have to use SC-LC converter ?
    3. Old 6509 links use many MMF cable, and new Nexus use SMF.
    Between same LX/LH links, if a side use MMF and another side use SMF, how can i connect each other ?
    Again new Nexus A-side rack is located at different row and between these rack, there is only sc-type patch pannel.
    Please let me know in detail, Thanks in advance, I really appreciate for your help.
    Jason.

    Hi Leo,
    Thanks of your reply.
    Dear Experts,
    I seek your expert's advice for another question urgently.
    Please make you time and share your experiecce.
    Thanks.
    Jason

  • Trying to modify a script to use test-connections in multiple domains?

    Hey Scripting Guy!
    I've created the script (below) to use test-connection against a list of hosts and write the results of the machines that respond to a .txt file. The only issue is that one of my sites utilizes two separate domains, does anyone have any advice as far as
    when a test connection fails, retrying the command using another domain name? (server.domain.com)
    I'll take any advice at this point... Thanks!
    New-PSDrive -Name S -PSProvider FileSystem -Root \\server\share -ErrorAction SilentlyContinue
    Get-ChildItem "S:\Folder1\Folder2\backup\backup Audits\Host Audits" -Filter *.txt | `
    Foreach-Object{
        $content = Get-Content $_.FullName
        #$SiteName = Get-ChildItem "S:\Folder1\Folder2\backup\backup Audits\Host Audits"
        #Find alive machines, and write their hostnames to output file for auditing
        Test-Connection -count 5 -ErrorAction SilentlyContinue $Content | Select-object -unique | Out-File      "S:\Folder1\Folder2\backup\backup Audits\Audit results by Site\$_"

    what i would like to do is when my test-connection fails with an error, append another domain suffix to the hostname so that if:
    test-connection computerxyz fails
    then test-connection computerxyz.domain.corp.com
    $server="$computer.domain1.com"
    if(Test-Connection $server -count 1 -quiet){
        $server="$computer.domain2.com"
        ... other code
    ¯\_(ツ)_/¯

  • Connect between Cisco ME 3600X-24FS and SF300

    Hi all.
    I want to connect some building, while distance between them about 200-300m.
    I use 3600X-24FS as core switch, and SF300 as access switch (because of low budget).
    What transceiver used to connect between them?
    Does anyone has other idea for this case?
    Thank in advance

    Hi all.
    I want to connect some building, while distance between them about 200-300m.
    I use 3600X-24FS as core switch, and SF300 as access switch (because of low budget).
    What transceiver used to connect between them?
    Does anyone has other idea for this case?
    Thank in advance

  • Navigate Between Multiple Account Log-in and Log-out

    I have an iMac running 10.5.8. I have it set up with five user accounts. Each user has to log-in and log-out to navigate between uses. Is there a way to navigate between multiple users without the constant logging in and logging out by the users?

    Top right hand corner of the menu bar, right beside the Spotlight icon, is the Fast User Switching menu.

  • Exchange 2013: how to set up multiple domain for OWA and ECP

    Exchange 2013 on Windows 2012R2
    Currently we have set this up using the guide below:
    http://mouzzamh.wordpress.com/2013/02/04/accessing-owa-from-multiple-domain-url/
    We can access OWA and ECP using the internal IP address/owa or ECP but when we use the URL it fails.
    We gave it an external IP address as well just to check if it will externally since the external DNS are pointing to the correct records: same issue it only works on IP address/owa or /ecp
    We were able to follow the guide from start to finish including the certs..
    The only difference on the guide and our exchange IIS environment for the new website is when he mentioned "Under IIS Settings / ISAPI and CGI Restrictions" we only have "ISAPI filters"...." ISAPI and CGI Restrictions" is only
    applicable to the default and backend website..
    Also, when the guide points to the path, should it be the new website path?
    Or maybe to avoid confusion, can anyone guide me on how to do it or any other guide that helped you if ever you had the same issue as mine?
    Thanks.

    Hi,
    Please run the following to check your OWA virtual directories for all web sites:
    Get-OWAVirtualDirectory | FL Identity,*URL*,path
    Personal suggestion, please consider to deploy another new CAS server. Then we can configure different OWA URLs in different servers. And pointed mail.domain.com and webmail.domain.com to two CAS servers respectively.
    Regards,
    Winnie Liang
    TechNet Community Support

  • CPM - Cut the connection between two views - the original and the copied

    Hi,
    I can copy one logical view to another one.
    But since then - every change in one view (the original or the other), takes place in both of the views.
    How can I cut the connection between the two logical views?
    Thanks,
    Carmit

    Hi,
    Please go through the below link this may helpful to you.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c04b1b26-e7fa-2a10-298c-c8c736f6ca9e
    Regards
    Sudheer

  • Sharing display and internet connection between a 13inch Mac Book and G4

    Does anyone know whether it is possible to connect a Mac Book and a G4 Powermac with an ethernet cable and then hook them both up to the same display and ethernet internet connection?

    Usually you use a router to share an internet connection and to make a local network between the computers over Ethernet or WiFi. I think it is possible to directly connect the computers without a router, but you might have to use a cross-over cable, I'm not sure how to set up a direct connection. Using a wireless router with wired ports would allow you the flexibility of using the MacBook wirelessly and the PowerMac with a wired connection. I have an Apple Airport Extreme Base Station, and it was pretty easy to set up, it plugs into my cable modem to share the internet connection.
    They make hardware devices that allow you to share a docking station between more than one computer, called a KVM switch, so you can have one keyboard, video display, and mouse and switch between two active computers.
    Alternately, using the network connection, you can use Chicken of the VNC, which is a virtual network computer, this opens a window, or full-screen mode, of a computer so you can operate it from another computer.
    http://sourceforge.net/projects/cotvnc/
    You can also control a PC from the Mac using Microsoft Remote Desktop Connection.
    http://www.microsoft.com/mac/otherproducts/otherproducts.aspx?pid=remotedesktopc lient
    Some monitors have multiple inputs, so you wouldn't need to use a KVM switch, if for example your monitor has both DVI and VGA inputs, the front panel can select the source, so you could use a DVI adapter for the MacBook and a VGA for the PowerMac. You could still use the KM portion of a KVM switch if you wanted to use a single full-size keyboard and mouse with both computers.
    http://iogear.com/main.php?loc=product&Item=GCS632U

  • What is the best way to switch between multiple image buffers? AND How to synchronize saves?

    Hello,
    I'm trying to flip-flop between two buffers and wondering the best possible solution for this.  I'd like to acquire an image in one buffer, send that off to be processed, and then while that's being processed acquire a second image.  Right now I have a "Create IMAQ vi" in a for loop and have it creating 10 image locations.  I'm using a non-NI framegrabber (shame I know) which makes things a bit more difficult to replicate.  I have two while loops.  One while loop currently grabs images from the framegrabber and places in the 10 different locations.  The other while loop currently holds a case structure that does the processing.  I have created a local variable that holds all of the image locations and reads those to be processed.  I don't know if this is actually making things faster or if it's better to just make one image location.
    I have two images attached.  One image is the Grab While loop.  Since I have an array of locations, I have to use a for loop and index each one out to my display. I then have a shift register to carry the image location info over to the next iteration of the while loop.
    The second attachment is the bulk of the main while loop.  It shows what happens to the image while it's being fully processed in the left case structure.  I know it does not look like much but one of the cases (which is called by Boolean Image FFT) is a subVI that does most of the processing.  I believe that is what really slows it down because of how that program is written. 
    The right case structure shows my saving mechanism.  I have two file paths. One to save the image and the other to save the processed image.  I have a sequence to make sure they save at the same time once it gets to that point. 
    The problem though is the following:
    In the grabwhileloop.png, you can see that I have a timing to see how fast the images are being acquired.  This value is approximately 60 fps (which is the rate of the Basler camera).  There is a similar set up in the main loop case structure. This processes very slowly and is approximately 1.04 fps.  Which would mean that the image I turn into an array in the left case structure in the main while loop image is more than likely different than the image I'm trying to save off in the right case structure since the grab is occurring at the same time.  I'd like to have the processed image to save alongside the image I am processing.
    Sorry for the big bulk of text.  This code has come a long way as it is.  If you have any suggestions on making it faster or more efficient please feel free to chime in.
    Thanks,
    Rob
    Attachments:
    GrabWhileLoop.png ‏34 KB
    MainWhileLoop.png ‏68 KB

    Thanks for the comment.  I have looked into the producer/consumer architecture, but to be honest, I'm not quite sure how everything will work while doing that. I have seen the example codes, and I have thought about implementing (or at least attempting to) but I'm still unconvinced that it will run that much more efficiently.  There is other setup outside of the images that had to be done outside of either while loop. Also, I don't know where I would put both loops.
    Last time, I attempted to put the grab while loop inside of the state machine.  Things got chopped because it took so long to go through the main while loop's "acquisition" state (which is really the processing state).  I needed both to simultaneously run.  The grab reset every time it went to the "grab" state which is not what I wanted.  The only way I can thing to have combatted this was to combine the grab and acquisition in the same state.  If that were to happen, I'd take out the for loop and grab one image at a time.  However, that would still probably make things even slower than they already are.
    In terms of the doing something before an image is assigned in for loop, I don't need that pixel sum value to refresh too quickly.  As it is already, the main while loop is slow enough as it is, so I am more afraid that everything will run too slowly the more I do.  I know where the bottleneck is in my code, but I can't really see a way to "even out the flow".  Even if I moved to the other architecture, I feel it'd take the same amount of time that it does already.
    From my debugging, the Image local variable in the main while loop seems to refresh as quickly as the grab while loop spits it out.  Granted once the main while loop finally completes, main images have gone by.  This is what has to be though because it just take up so much processing power to run through the main while loop state.
    As a side note, does labview have an issue with acquiring images in real-time that you have heard of?  I ask because when I run the code, there is a solid white line that I'm supposed to see in my display.  Every time things either time out or something, the line moves which is not supposed to happen.  The line also moves every time I place my mouse cursor in the display or if I spin the mouse wheel to scroll.  If I don't do either of those things, it'll eventually move on its own.

  • How to manage connectivity between Oracle 11g &9i Database and Visual Studio 2010 professional in window 7

    Hi,
     I am not able to resolve the error of
    “ORA-12514: TNS:listener does not currently know of service requested in connect descriptor”
    Below Link is the indication,  related to that error.

    Hi Surbhi.Gupta,
    Thank you for posting in MSND forum.
    According to your descriptiom, I suggest you could try the following blog to connect to Oracle from Visual Studio check your issue again.
    Reference:
    http://blogs.msdn.com/b/kaevans/archive/2009/07/18/connecting-to-oracle-from-visual-studio.aspx
    In addition, as you said the error message, I did some research about this error message. So I suggest you could refer then following thread to check your error, maybe you will get some useful message.
    http://dba.stackexchange.com/questions/36370/oracle-11g-listener-fails-with-ora-12514-and-ora-12505-errors
    However, since this issue is related to the third-party database oracle, so if possible, I suggest you could try to post your issue directly to this Oracle official website:http://www.oracle.com/us/corporate/contact/about-your-account-070507.html
    , you will get better support.
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Connection between oracle forms10g on XP and oracle db 11g on WINDOWS 7

    Hello,
    I am trying to connect forms 10g R2 to oracle 11g.
    My forms is on windows XP inside VMware while my db is on windows 7 64 bit host.
    i have tried all ways known to me and the ones i saw on the internet but none works.
    I will be glad if you can refer me to a link that talks on this type of connection in details or any solution you can provide.
    Thanks in anticipation
    AbdurRahman

    Thank you for your response,
    1) I copied the tnsnames.ora,sqlnet.ora and listener.ora files from the database 11g on the windows 7 host to the DevSuiteHome_1\NETWORK\ADMIN path for the developer
    suite 10g on XP Vmware.
    2) I also entered the host address in the C:\WINDOWS\system32\drivers\etc\host file i.e 192.168.202.54     AAJANI-pc.
    below are the details of my db and forms
    DB
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE 11.2.0.1.0 Production
    TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    FORMS
    Forms [32 Bit] Version 10.1.2.0.2 (Production)
    Oracle Toolkit Version 10.1.2.0.2 (Production)
    PL/SQL Version 10.1.0.4.2 (Production)
    Oracle Procedure Builder V10.1.2.0.2 - Production
    PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
    Oracle Query Builder 10.1.2.0.2 - Production
    Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
    Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
    Oracle Multimedia Version 10.1.2.0.2 (Production)
    Oracle Tools Integration Version 10.1.2.0.2 (Production)
    Oracle Tools Common Area Version 10.1.2.0.2
    Oracle CORE     10.1.0.4.0     Production
    the error i got whenever i try to connect to the db from forms is
    ORA-12170:TNS:Connect timeout occurred.
    once again
    Thanks in advance

Maybe you are looking for