Connection between SMD Agent and SMD server via SAProuter

In our scenario, we have to setup the connection between SMD agent and SMD server(solution manager server) via saprouter. But during the installation of SMD agent, we can only specify the hostname of the managing system, we have no place to add saprouter string(/H/..../H/). I I am not sure if we could connect the agent and server via saprouter, if so how to do it?
Hope someone can give us your precious advices on this issue.
Karl

Perfect; and thanks for your response. I found this help page for developers to implement P4 support over SAP router: http://help.sap.com/saphelp_nw73/helpdata/en/48/2992d7ad8758d7e10000000a421937/content.htm
But in the SM Diagnostics Setup options I can set up only a direct HTTP adresses and have no options to set up connections over a sap router to P4 ports directly. I can at the moment only solve my problems with NAT or firewall rules.
And also the diagnostic agent setup has no options to config a proxy or sap router. I found yesterday a blog on sdn side with screenshots of the setup with all available connection opetions to SLD... sry I can not post this link today.
This is an official statment of SAP from the current version of SMD guide; it is also possible but why not from the beginning???:
In some network conficurations, the Diagnostics agent has to connect to the Managing system though a SAP router.
This feature will be fully supported in Solution Manager 7 Ehp2 (7.02).
In order to enable this feature in Ehp1, please contact the Diagnostics Agent support team to get information on how to
setup the agent and on which patch level you can perform the installation.
This thread were a long time not answared; proxy and routing connections are mostly stepmotherly handled by SAP; this is also a problem by set up of automatic RFC generations in SMSY; why there are in the setup assitents no options to set up the router string.
I have absolutly no comprehension for this in year 2011. All this technics are good known and long time tested.
In this case the f**k has provoked an answare to this thread and this is what I expected; but sorry for my style You are right I could also writh why the heck
FAQ:
SMD root side on SDN: http://service.sap.com/diagnostics
SM FAQ: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4e49dbea-0c01-0010-91bd-f0b61388c9ae
SM Setup Home: http://wiki.sdn.sap.com/wiki/display/SMSETUP/Home
SM Diagnostic Troubleshooting Guide: https://websmp201.sap-ag.de/~sapdownload/002007974700000409092009E/DiagAgent_TroubleShooting.pdf
SMD Candidate Setup: http://wiki.sdn.sap.com/wiki/display/SMSETUP/Diagnostics+Agents

Similar Messages

  • Lost connection between ovm-manager and ovm-server (ovm 3.1)

    Hi,
    I have a manager as a VM on my laptop and a physical server as an ovm-server. Everything is fine when i boot the server but after some time, the manager stop to show the information from the server. in the ovs-agent log file the following messages are repeated regulary
    [2013-08-29 13:06:19 6160] DEBUG (notification:289) Trying to connect to manager.
    [2013-08-29 13:06:20 6160] DEBUG (notification:291) Connected to manager.
    [2013-08-29 13:06:20 6160] ERROR (notification:316) No manager Core API server object for 10:60:4b:88:bc:24:10:60:4b:88:bc:25:fe:ff:ff:ff.
    [2013-08-29 13:06:34 6171] ERROR (notification:64) Unable to send notification: (111, 'Connection refused')
    I did not reboot neither the server nor the manager. No IP change. Rebooting the manager has no effect.
    The only way to restore communication is to restart the ovs-agent on the server, but this restart disable the network card. I must be physical on the server to restart the network.
    any help will be very helpful
    best regards
    Jean-Marc

    Hi,
    The are many steps to verify:
    Verify with your firewall on the Oracle VM Manager system (service iptables stop).
    Verify with a ping between OVM Manager and OVM Server using the IP Address and using the hostname for each one (from OVM Manager : ping ovm-server ; and from OVM Server: ping ovm-manager).
    I hope this can help you
    Best Regards

  • ODBC connectivity between Oracle 11G and MSSQL Server on Solaris 10

    When we were running in 10G, I was able to successfully configure hsodbc using unixODBC and freeTDS to allow for an ODBC connection between Oracle and MSSQL Server.
    A few weeks ago we upgraded to 11G and I've been struggling to get the connectivity (dg4odbc) working.
    In our 10g environment unixODBC and freeTDS were compiled as 32-bit. I have recompiled them as 64-bit and switched over to an 11G listener and I am getting the following error:
    ERROR at line 1:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    here are my configuration files:
    /usr/local/unixODBC/etc[PPRD]> more odbc.ini
    [ODBC Data Sources]
    identipass = MS SQL Server
    [identipass]
    Driver = /usr/local/freetds/lib/libtdsodbc.so
    Setup = /usr/local/freetds/lib/libtdsodbc.so
    Description = MS SQL Server
    Trace = 1
    TraceFile = /export/home/oracle/ODBC/odbc.trace
    Server = stormwind
    QuoteID = Yes
    AnsiNPW = No
    Database = identipass
    Port = 1433
    TDS_Version = 8.0
    [Default]
    Driver = /usr/local/freetds/lib/libtdsodbc.so
    /usr/local/unixODBC/etc[PPRD]> more odbcinst.ini
    [TDS]
    Description=FreeTDS driver
    Driver=/usr/local/freetds/lib/libtdsodbc.so
    Setup=/usr/local/freetds/lib/libtdsodbc.so
    Trace=Yes
    TraceFile=/tmp/freetds.log
    FileUsage=1
    UsageCount=2
    tnsnames.ora
    identipass =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = tcp)(HOST = localhost)(PORT = 1522))
    (CONNECT_DATA =
    (SID = identipass)
    (HS = OK)
    listener.ora
    LISTENERODBC =
    (ADDRESS_LIST=
    (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
    (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
    SID_LIST_LISTENERODBC=
    (SID_LIST=
    (SID_DESC=
    (SID_NAME=identipass)
    (ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1)
    (ENV="LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/hs/lib")
    (PROGRAM=dg4odbc)
    And finally, output from the trace file:
    /u01/app/oracle/product/11.2.0/db_1/hs/log[PPRD]> more identipass_agt_1381.trc
    Oracle Corporation --- THURSDAY NOV 18 2010 16:00:16.010
    Heterogeneous Agent Release
    11.2.0.1.0
    Oracle Corporation --- THURSDAY NOV 18 2010 16:00:16.008
    Version 11.2.0.1.0
    Entered hgogprd
    HOSGIP for "HS_FDS_TRACE_LEVEL" returned "Debug"
    Entered hgosdip
    setting HS_OPEN_CURSORS to default of 50
    setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
    setting HS_FDS_RECOVERY_PWD to default value
    setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
    setting HS_IDLE_TIMEOUT to default of 0
    setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
    setting HS_NLS_NCHAR to default of "AL32UTF8"
    setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
    setting HS_FDS_DATE_MAPPING to default of "DATE"
    setting HS_RPC_FETCH_REBLOCKING to default of "ON"
    setting HS_FDS_FETCH_ROWS to default of "100"
    setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
    setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
    setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
    setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
    setting HS_FDS_MAP_NCHAR to default of "TRUE"
    setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
    setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
    setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
    setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
    setting HS_FDS_QUERY_DRIVER to default of "TRUE"
    HOSGIP returned value of "FALSE" for HS_FDS_SUPPORT_STATISTICS
    Parameter HS_FDS_QUOTE_IDENTIFIER is not set
    setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
    setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
    setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
    Default value of 64 assumed for HS_FDS_SQLLEN_INTERPRETATION
    setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLSt
    atistics;gtw$:SQLGetInfo"
    setting HS_FDS_DELAYED_OPEN to default of "TRUE"
    setting HS_FDS_WORKAROUNDS to default of "0"
    Exiting hgosdip, rc=0
    ORACLE_SID is "identipass"
    Product-Info:
    Port Rls/Upd:1/0 PrdStat:0
    Agent:Oracle Database Gateway for ODBC
    Facility:hsa
    Class:ODBC, ClassVsn:11.2.0.1.0_0008, Instance:identipass
    Exiting hgogprd, rc=0
    Entered hgoinit
    HOCXU_COMP_CSET=1
    HOCXU_DRV_CSET=873
    HOCXU_DRV_NCHAR=873
    HOCXU_DB_CSET=873
    HOCXU_SEM_VER=112000
    Entered hgolofn at 2010/11/18-16:00:16
    HOSGIP for "HS_FDS_SHAREABLE_NAME" returned "/usr/local/unixODBC/lib/libodbc.so"
    Entered hgolofns at 2010/11/18-16:00:16
    symbol_peflctx=0x7a715450
    hoaerr:0
    Exiting hgolofns at 2010/11/18-16:00:16
    Exiting hgolofn, rc=0 at 2010/11/18-16:00:16
    HOSGIP for "HS_OPEN_CURSORS" returned "50"
    HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
    HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
    HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
    HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
    HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
    HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
    HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
    HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
    Invalid value of 64 given for HS_FDS_SQLLEN_INTERPRETATION
    treat_SQLLEN_as_compiled = 1
    Exiting hgoinit, rc=0 at 2010/11/18-16:00:16
    Entered hgolgon at 2010/11/18-16:00:16
    reco:0, name:identipass, tflag:0
    Entered hgosuec at 2010/11/18-16:00:16
    Exiting hgosuec, rc=0 at 2010/11/18-16:00:16
    HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
    HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
    HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
    HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
    HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
    HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
    HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
    HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
    HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
    HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
    using identipass as default value for "HS_FDS_DEFAULT_OWNER"
    HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
    Entered hgocont at 2010/11/18-16:00:16
    HS_FDS_CONNECT_INFO = "identipass"
    RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
    Entered hgogenconstr at 2010/11/18-16:00:16
    dsn:identipass, name:identipass
    optn:
    Entered hgocip at 2010/11/18-16:00:16
    dsn:identipass
    Exiting hgocip, rc=0 at 2010/11/18-16:00:16
    Exiting hgogenconstr, rc=0 at 2010/11/18-16:00:16
    Entered hgopoer at 2010/11/18-16:00:16
    hgopoer, line 233: got native error 0 and sqlstate ; message follows...
    Exiting hgopoer, rc=0 at 2010/11/18-16:00:16
    hgocont, line 2753: calling SqlDriverConnect got sqlstate
    Exiting hgocont, rc=28500 at 2010/11/18-16:00:16 with error ptr FILE:hgocont.c LINE:2772 ID:Something other than invalid authoriza
    tion
    Exiting hgolgon, rc=28500 at 2010/11/18-16:00:16 with error ptr FILE:hgolgon.c LINE:781 ID:Calling hgocont
    Entered hgoexit at 2010/11/18-16:00:16
    Exiting hgoexit, rc=0
    Can anyone help me see what I'm missing?

    Thank you for your response.
    I modified the envs LD_LIBRARY_PATH parameter in my SID_LIST_LISTENERODBC to be:
    (ENV="LD_LIBRARY_PATH=/usr/local/freetds/lib:/usr/local/unixODBC/lib:/u01/app/oracle/product/11.2.0/db_1/lib:/
    u01/app/oracle/product/11.2.0/db_1/hs/lib")
    and bounced the listener, but I'm still getting the same error.
    I do not have a lib64 directory in my Freetds installation, but all the files in the lib directory are 64-bit.
    Here is a listing of my DG4ODBC init file:
    /u01/app/oracle/product/11.2.0/db_1/hs/admin[PPRD]> more initidentipass.ora
    # This is a sample agent init file that contains the HS parameters that are
    # needed for an ODBC Agent.
    # HS init parameters
    HS_FDS_CONNECT_INFO = identipass
    #HS_FDS_TRACE_LEVEL = 0
    HS_FDS_TRACE_LEVEL = Debug
    HS_FDS_SHAREABLE_NAME = /usr/local/unixODBC/lib/libodbc.so
    HS_FDS_SUPPORT_STATISTICS=FALSE
    HS_LANGUAGE=AMERICAN.AMERICA.WE8ISO8859P15
    # ODBC specific environment variables
    set ODBCINI=/usr/local/unixODBC/etc/odbc.ini
    # Environment variables required for the non-Oracle system
    #set <envvar>=<value>
    Thanks for your help with this!
    Catina

  • HSODBC connectivity between ORACLE 10g and SQL Server 2008 R2

    Hi,
    I'm getting below error when using the DB link between Oracle (10.2.0.2 which is on Sun Sparc) and MS Sql server 2008 R2.
    ERROR at line 1:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [Generic Connectivity Using ODBC][Microsoft][ODBC Driver Manager] Data source
    name not found and no default driver specified (SQL State: IM002; SQL Code: 0)
    ORA-02063: preceding 2 lines from SCOPEX.WORLD
    My Config files:
    On Sun Sparc 5.9 where Oracle server is running.
    TelemetryDB1 =
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
    (CONNECT_DATA=(SID=TelemetryDB1))
    (HS=OK)
    Listener.ora file on Windows machine:
    TelemetryDB1 =
    (ADDRESS_LIST=
    (ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
    (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
    SID_LIST_TelemetryDB1 =
    (SID_LIST=
    (SID_DESC=
    (SID_NAME=TelemetryDB1)
    (ORACLE_HOME=C:\oracle\product\10.2.0\db_1)
    (PROGRAM=hsodbc)
    Tnsnames.ora file:
    TelemetryDB1 =
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
    (CONNECT_DATA=(SID=TelemetryDB1))
    (HS=OK)
    initTelemetryDB1.ora file under ORACLE_HOME\hs\admin\
    HS_FDS_CONNECT_INFO = TelemetryDB1
    HS_FDS_TRACE_LEVEL = OFF
    We have created DNS with TelemetryDB1.
    I'm getting the above error for DB links between Oracle 10.2 and SQL Server 2008 R2. But the same, when configured for MS SQL server 2000 works fine without any issues.
    Please advise me to rectify the error. We've been working for the last couple of weeks.
    Regards,
    Sunil

    Sunil,
    You don't need an Oracle ODBC driver.
    The way it works is that in the gateway init<sid>.ora file, in your case initTelemetryDB1.ora, the parameter HS_FDS_CONNECT_INFO points to a system DSN. This DSN should then be configured to use an ODBC driver to connect to the non-Oracle database. So, in your setup when you want to access the SQL*Server 2008 database then the DSN should use an ODBC driver that can connect to a SQL*Server 2008 database. If you still use the initTelemetryDB1.ora file for the connection then the TelemetryDB1 DSN should be configured to access the SQL*Server 2008 database.
    However, there are a couple of problems with your actual setup -
    - the configuration you have - 10.2 RDBMS on a Sun machine and HSODBC on Windows - is not supported. HSODBC should only be used from a RDBMS that is in the same ORACLE_HOME as HSODBC.
    - 10.2 HSODBC is now desupported and has been replaced by the 11g Database Gateway for ODBC (DG4ODBC) and the configuration you want is supported. That is because unlike HSODBC the DG4ODBC gateway can be installed standalone with a RDBMS being installed.
    I recommend that you download and install 11.20.2 DG4ODBC on your Windows machine in a new Oracle_home and access that from the 10.2 RDBMS on Sun - which is a supported configuration. But to do this, you will need to apply either the 10.2.0.4 or 10.2.0.5 patchset to your RDBMS.
    There is more information in the following note available on My Oracle Support (MOS) -
    Note.1083703.1 Master Note for Oracle Gateway Products
    The 11.2.0.2 DG4ODBC can be downloaded from MOS as patch and for the gateways on Windows 32-bit you just need to download -
    p10098816_112020_platform_4of6.zip
    However, to check the HSODBC ou need to confirm that the DSN used by HSODBC points to a System DSN configured to access SQL*Server 2008.
    Have a look at -
    Note 109730.1 How to setup generic connectivity (HSODBC) for Windows NT
    But remember this is not a supported version or configuration and you should be using Dg4ODBC.
    Regards,
    Mike

  • Hi,the connection between i-phonerk and boom box via bluetooth doesn´t wo

    Hi,
    my I-phone 4 doesn´t find a bluetooth boombox.And it can´t be connected either

    This is an odd one! Same problem with my LogiTech 8 speaker BoomBox!
    I wonder what is going on? My blue light on the BoomBox simply refuses to flash, thus pairing to my iPodTouch or iPhone 4 and iPad 2, won't work!

  • How to create more than one connections between my host and server

    Hi,
    I want to create multiple connections(at least, two connections) between my host and the server.
    And use them to transfer data at the same time.
    Could you help me, and could you give me a sample code example?
    ^-^
    Thank you very much

    import java.awt.*;
    import java.awt.event.*;
    import java.util.*;
    import java.net.*;
    import java.io.*;
    import java.nio.channels.*;
    import javax.swing.*;
       This program shows how to interrupt a socket channel.
    public class InterruptibleSocketTest
       public static void main(String[] args)
          JFrame frame = new InterruptibleSocketFrame();
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.setVisible(true);
    class InterruptibleSocketFrame extends JFrame
       public InterruptibleSocketFrame()
          setSize(WIDTH, HEIGHT);
          setTitle("InterruptibleSocketTest");
          JPanel northPanel = new JPanel();
          add(northPanel, BorderLayout.NORTH);
          messages = new JTextArea();
          add(new JScrollPane(messages));
          busyBox = new JCheckBox("Busy");
          northPanel.add(busyBox);
          startButton = new JButton("Start");
          northPanel.add(startButton);
          startButton.addActionListener(new
             ActionListener()
                public void actionPerformed(ActionEvent event)
    //               startButton.setEnabled(false);
                   cancelButton.setEnabled(true);
                   connectThread = new Thread(new
                      Runnable()
                         public void run()
                            connect();
                   connectThread.start();
          cancelButton = new JButton("Cancel");    
          cancelButton.setEnabled(false);
          northPanel.add(cancelButton);
          cancelButton.addActionListener(new
             ActionListener()
                public void actionPerformed(ActionEvent event)
                   connectThread.interrupt();
                   startButton.setEnabled(true);
                   cancelButton.setEnabled(false);
              new Thread(new TestServer(Port)).start();
          Connects to the test server.
       public void connect()
           new Thread(new Client(Port)).start();
    //       Port++;
       class Client implements Runnable{
               Client(int port){
                   this.port = port;
               private Scanner in;
           private int port;
            public void run() {
                    try
                       SocketChannel channel = SocketChannel.open(new InetSocketAddress("localhost", port));
                       try
                          in = new Scanner(channel);
                          while (true)
                               try{
                                  if (in.hasNextLine())
                                     String line = in.nextLine();
                                     System.out.println(line + "  " + channel);
         //                            messages.append(line);
         //                            messages.append("\n");                       
                                  else Thread.sleep(100);
                               }catch(Exception e){
                                    e.printStackTrace();
                       }finally
                            messages.append("Socket closed\n" + channel);
                          channel.close();
                    catch (IOException e)
                       messages.append("\nInterruptibleSocketTest.connect: " + e);
          A multithreaded server that listens to port 8189 and sends random numbers to the client.
       class TestServer implements Runnable
              ServerSocket s;
              private int port;
              TestServer(int port){
                  this.port = port;
                  try {
                   s = new ServerSocket(port);
              } catch (IOException e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
          public void run()
             try
                int i = 1;
                while (true)
                   Socket incoming = s.accept();
                   Runnable r = new RandomNumberHandler(incoming);
                   Thread t = new Thread(r);
                   t.start();
             catch (IOException e)
                messages.append("\nTestServer.run: " + e);
          This class handles the client input for one server socket connection.
       class RandomNumberHandler implements Runnable
             Constructs a handler.
             @param i the incoming socket
          public RandomNumberHandler(Socket i)
             incoming = i;
          public void run()
             try          
                  int i = 0;
                OutputStream outStream = incoming.getOutputStream();
                PrintWriter out = new PrintWriter(outStream, true /* autoFlush */);
                while (true)
                   out.println(i);  
                   i++;
                   Thread.sleep(100);
             catch (IOException e)
                messages.append("\nRandomNumberHandler.run: " + e);
             catch (InterruptedException e)
                messages.append("\nRandomNumberHandler.run: " + e);
          private Socket incoming;
       private JButton startButton;
       private JButton cancelButton;
       private JCheckBox busyBox;
       private JTextArea messages;
       private TestServer server;
       private Thread connectThread;
       public static final int WIDTH = 300;
       public static final int HEIGHT = 300;
       public static int Port = 8848;

  • Connection between SDM client and server is broken

    Dear All,
    First of all this is what I have
    -NW04 SPS 17
    -NWDS Version: 7.0.09 Build id: 200608262203
    -using VPN connection
    -telnet on port 57018 is succesfull
    I can login to SDM server (from NWDS and from SDM GUI) I can see the state of SDM(green light), restart it, can navigate through tabs in GUI, but every time I am trying to deploy an ear i have this error:
    Deployment exception : Filetransfer failed: Error received from server: Connection between SDM client and server is broken
    Inner exception was :
    Filetransfer failed: Error received from server: Connection between SDM client and server is broken
    I have already read a lot of topics,blogs,notes but didn't find the solution.
    Can anybody help me?
    Best Regards

    Having same issue. Nothing helped so far... Using NWDS 7.0 SP18.
    I have turned SDM tracing on and this is what I see on client side after sending first data package:
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/17 Client: finished sending string part"
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/0 Client: receive String part from Server"
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl.receiveFromServer(NetComm ..): Entering method
    com.sap.bc.cts.tp.net.NetComm.receive(): Entering method
    com.sap.bc.cts.tp.net.NetComm: debug "Method "receive(char[])" could not read all requested bytes. There are still 12 bytes to read"
    com.sap.bc.cts.tp.net.NetComm: debug "Caught IOException during read of header bytes (-1,          43):Connection reset"
    com.sap.bc.cts.tp.net.NetComm: debug "  throwing IOException(net.id_000001)"
    com.sap.bc.cts.tp.net.NetComm.receive(): Exiting method
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/1 Client: connection was broken"
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/0 Client: finshed sendAndReceive"
    com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
    My connection on server is still active so I have to restart SDM server to reset and try it again.
    Anyone have idea whats happening?
    Edited by: skyrma on Feb 24, 2012 2:46 PM
    Edited by: skyrma on Feb 24, 2012 2:47 PM
    Edited by: skyrma on Feb 24, 2012 2:47 PM

  • I have a 27" iMac connected to several others pc and to Server via router. Very frequently Lan or internet drops in my iMac

    I have a 27" iMac connected to several others pc and to Server via router. Very frequently Lan or internet drops in my iMac. I Have OS 10.6.7 with all updates.

    Issues like this are going to be related to the network. Intermittant problems are typically due to network interference, have you checked istumbler.net to get a report of your network?

  • Can't establish wireless connection between the printer and computer.

    I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window  in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit  altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

    Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you. 
    I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
    When you say; 'I reset the printer to factory settings', how where you trying to do this? 
    I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
    To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
    "I've checked to make sure both computer and printer are on the same network."  Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads 
    To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
    ... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
    ... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
    ... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues.  HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer.  I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer  Please let me know if any of these steps resolved your issue, or the details of what happened.  I look forward to hearing from you, hopefully with good news!   Thanks, 

  • How to set up internet connection between MacBook Pro and an old eMac?

    I got an old eMac without wifi and a MacBook Pro. I'd like to share the network connection via ethernet cable to my eMac, but I can't get it work.
    I'd like to use it with screenrecycler and it needs a network connection.
    How to do it? How to set up the connection between the client and the host? Could somebedy give me a step by step guide?
    Thank you very much

    Hello,
    First, are you using Wifi for Internet on the MBP?
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list, Wifi on the MBP.
    In Shating on both, enable File Sharing, Screen Sharing, & Web Sharing on both.
    Then with the Ethernet cable between the two, find the IPs of both, or use Finder>Go>Connect to Server>Browse... see what shows up.

  • (Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

    Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
    I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
    Let me know if you know why this is happening.

    With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
    Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
    While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
    I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
    You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
    Something you can try:
    System Preferences -> Network
    Gear icon on the bottom left, next to the [+] [-] icons.
    Select *Set Service Order...*
    Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
    NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

  • Connectivity between Oracle database and client...

    Hi guys,
    I was asked to make a connection between oracle client and database via internet so that our clients can access the database from different parts of the country, and the data that is transmitted in the internet does not require security consideration. And I have successfully implemented this.
    But later onwards they asked me to structure it in such a way so that clients must be able to select, insert, update and delete data offline, in case there is online connectivity problem.
    So my question is, are there any possibilities in oracle to temporarily store data that are available in the oracle database to the client side and then later onwards transfer those datas once the clients are available online. Or are there any other alternative ways...
    Additional Information - Client access the database through an application created by VB.
    Please do help me on this project.
    Thanks in advance for your help.
    Asif.

    user11000521 wrote:
    Hi guys,
    I was asked to make a connection between oracle client and database via internet so that our clients can access the database from different parts of the country, and the data that is transmitted in the internet does not require security consideration. And I have successfully implemented this.
    But later onwards they asked me to structure it in such a way so that clients must be able to select, insert, update and delete data offline, in case there is online connectivity problem.
    So my question is, are there any possibilities in oracle to temporarily store data that are available in the oracle database to the client side and then later onwards transfer those datas once the clients are available online. Or are there any other alternative ways...
    Additional Information - Client access the database through an application created by VB.
    Please do help me on this project.
    Thanks in advance for your help.
    Asif.You probably should do a cost/risk analysis. Where you are headed might be able to be done (but it will require that the "clients" also have their own copy of the database) but it won't be easy and it certainly won't be cheap, either in initial implementation or in on-going maintenance. The alternative is to take a hard look at your network connections and see if it wouldn't be cheaper/easier to be able to ensure that it is reliable. Remember "the internet" won't break, it is highly redundant. If you have connectivity issues, they will almost certainly be in your own equipment and configurations, so your (your organization) will have the ability to address and fix any issues there.

  • Connectivity between r/3 and bw

    Hi
    how do i check if the connectivity between r/3 and bw is established or not.
    plz provide me steps, i m unable to find out if r/3 to bw connection is working fine or not
    because though i am replicating the datasources from r/3 to bw, i cannot view the datasource in bw
    for the first time
    Regards

    hello,
    right click on the source system and select check.
    If it is connected..it will say connection is ok.
    or
    in teh R/3 system,run T-Code sm59.
    In ABAP connections, select your BI server and check for connection.
    Reagrds,
    dhanya

  • How can i make a connection between an application and a database over net

    dear sir
    how can i make connection between an appliction and a database over internet while the client side appliction is behind proxy and firewall
    for example how the live update of norton antivirus makes connection to the data server to make comparetions and get new virus definitions
    does that depend on sockets technology ?
    what references can guide me to the solution please?

    The ability to do so depends entirely on the JDBC driver implementation having some proxy method. It needs to recognize the HTTP or SOCKS proxy and use them to connect, and the firewall and proxy need to allow those specific port connections.
    To the best of my knowledge, all of these update utilities, e.g. live update for Netscape, Norton, etc., do not connect directly to the database. As it is, no sane security person would allow a database to be exposed to the Net. Rather, they connect using HTTP or HTTPS, which normally traverses firewalls just fine, to connect to a Web or application server on the far end. That application server then parses the request and retrieves whatever it needs to from the database.
    In other words, you cannot have a 2-tier client/server application. You need a 3-tier application:
    your client -> Web/app server -> database
    where the connection from your client to the Web/app server is over http or https through the firewall and proxies.
    Hope this helps.
    Avi
    dear sir
    how can i make connection between an appliction and a
    database over internet while the client side
    appliction is behind proxy and firewall
    for example how the live update of norton antivirus
    makes connection to the data server to make
    comparetions and get new virus definitions
    does that depend on sockets technology ?
    what references can guide me to the solution please?

  • Need help in establishing the connection between BO federator and Oracle DB

    Hi Experts,
    I am working on BO federator and now I need to establish the connection between BO federator and the oracle db to use this as the source for the federator,
    I know we need to download the respective oracle DB connect .jar file from the oracle web site and place it under the drivers section(folder) of the BO Federator.
    Now I need to understand what is/are the next steps I need to follow and what are the values for the following parameters which are required during establishing the connectivity while creation of data sources from federator end.
    Host Name:
    Port:
    SID:
    Schema:
    Please share the details, any help will be highly appreciated.
    Thanks with regards,
    Vinay

    Hi,
    Please find below details.
    Host Name: Server Name or IP Address (Oracle)
    Port: (oracle Server Port)
    SID:SID is a unique name for an Oracle database instance. -> To switch between Oracle databases, users must specify the desired SID <-. The SID is included in the CONNECT DATA parts of the connect descriptors in a TNSNAMES.ORA file
    Schema: no need to enter(Blank)
    Thanks,
    Amit

Maybe you are looking for