Connection between two or more outputs of PCI-DIO96

Is it allowed to connect an output with low-Signal and an output with high-Signal of PCI-DIO96. In the manual I found only, that it is not allowed to connect +5V to GND.
Thank you for your help
Markus Pilhoefer

You shouldn't tie any two output pins together. If they have opposite polarity, the high output will attempt to drive the low output and may damage that port.

Similar Messages

How can I make a server differ between two or more clients?

How can I make a server differ between two or more clients?
The clients can connect and talk to the server fine, but how can I make the server talk to one, two or all clients? i.e. what would be a good way to implement this?
Currently, the server listens for connections like this:
while (listening) {
try {
new ServerThread(this, serverSocket.accept()).start();
I guess one way would be to add the ServerThreads to a Hashtable with the client ID as key, and then get the ServerThread with the proper client ID, but this seems unnecessary complicated. Any ideas?

Complicated was perhaps the wrong word, I should have
written something like it doesn't "feel" right. Or is
this a common and good way to solve communication
between a server and multiple clients?Thats pretty much how I do it. I normally use an array or ArrayList of Sockets instead of HashTable, with [0] being the first player etc.... Then you can communicate with exactly who you want. If you want to send bytes to all of them, just send the same thing to each socket individually (or is there a better way to do this?).

The connection between two Tuxedo machines

We want to locate our servers(services) onto different machines, we want to know
:whether the connection,between two machines, is built up at the first time the
servers booted and kept persistently connectted, or just build up the connection
when there comes a request.

Remote machines connect to one another lazily. If you have machines A
(master), B and C, then B and C do not connect until a request is made
between B and C. All machines connect to the master at boot time.
roopesh wrote:
>
The connection is persistent and is not request based.
The machines communicate using BRIDGE.The DBBL which runs
on the primary master machines keep doing sanity checks
and health of BBL at all the machines connected and if
any BBL does not respond for the specified time(set by
DBBLWAIT) in RESOURCES section.then that machine gets partitioned by DBBL.
for more info you can read tuxedo documentation.
Thanks
Roopesh
"YANG YI" <[email protected]> wrote:
We want to locate our servers(services) onto different machines, we want
to know
:whether the connection,between two machines, is built up at the first
time the
servers booted and kept persistently connectted, or just build up the
connection
when there comes a request.

Connection between two clients

Hi,
I want to get some guidance on connection between two clients. Suppose I need to connect client 500 with client 900 in the same system without changing the logical names.
Thanks & Regards
Nabarun

Nabarun -
It almost sounds as if you just want an RFC to go from one client to the other. RFCs (SM59) are not client dependant so you can create one in any client. You can create one with the system name and point it to the client number using a specific user and password. I would recommend for security it be a communications user and not a dialog user depending on what you will be sending between the clients. However, the user will need the correct permissions and again, depending on what you are trying to accomplish, it may have to be a DIAG user although I would be wary. Then create a 2nd RFC pointing back to the other client. For example...
RFC 1
System Name = <System>
Client = 500
User = <userid in clnt 500>
RFC 2
System Name = <System>
Client = 900
User = <userid in clnt 900>
Then when you are in client 500, there is a path/connection to client 900 via that clients ID and password and vice versa using the appropriate RFC. Again, with out more info on what you are attempting, this may be your solution. Hope this helps. Good luck
Regards,
Zecher

How to make a connection between two wireless sensor networks of different groups through gateway?did any external device or coding is needed?

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

Error 33172 occurred at Read & Write data transfer between two or more PF2010 controller

Hi,i need to do data transfer between two or more FP2010 controller.e.g. FP2010(A) & FP2010(B).
FP2010(A) need to transfer the measurement (from its I/O module) to FP2010(B) to do the data analysis.These data transfer should be synchronous btw two controller to prevent data lost.
From the vi used in the attachment,i encountered some problems at:
(1) Error 33172 occurred while publishing the data.Can i create and publish data under different item name?
(2) How to synchronies the read & write btw contorller?
All controller are communicating with each other directly without the need of a host computer to link them together
Is there any other method to do fast data transfer betwe
en controller?

Hi YongNei,
You were succesful in omiting enough information to make it very difficult to answer!
Please post your example.
Please tell us what version of LV-RT you are using.
Please define what you concider "fast data transfer".
Have you concidered mapping the FP tags of FP2010(A) to FP2010(B) and vise versa?
WHat exactly has to be syncronized?
If you have something that is close to working, share that.
Well, that as far as I can go with the info you have provided. Depending on the details, what you are asking could be anything from trivial to impossible with the currently available technology. I just can't say.
It would probably be a good idea to start over with a fresh question (sorry) because not many people are going to know what a a "
PF2010" is and I can not guarentee that I will be able to get back to you personally until next week-end.
Trying to help you get an answer,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How to check the Network Connectivity between two systems.

Hello Everyone,
Please let me know different ways to check the network connectivity between two systems other than ping/traceroute commands.
Thank You.
Edited by: 835435 on Jan 20, 2012 11:43 AM
Edited by: 835435 on Jan 20, 2012 11:44 AM

Use snoop.
snoop -d <nic> - will give requests and replies coming/going in/out of the specified NIC.
snoop -d <nic> <MAC address of the target host> - will give requests coming from the required host.

RFC connection between two SAP systems (with SAP router)

Hi!
I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
The network connection between the servers is VPN.
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
my server --> customer
my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
Back-way
SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
something like:
/H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
Thank you very much!
regards
Thom

Same answer as in the other forum where you cross posted....

Gprs connection between two mobile phones

Hi
is it possible to make a gprs connection between two mobile phones without a server(pc...)? when the answer "yes" please give me an exapmle...

I'm not sure, I'm just connecting some facts. I'm talking about Siemens S55. It has implemented sockets (both client sockets and server sockets). The phone, when connected via GPRS has IP address (Siemens' netmonitor reports it..). But i've never tried to use server-socket on my mobile.
So it seems that it is in fact possible on some handsets. (AFAIK nokia 6610 and similar does not support sockets...)

Connection between two views

Hi Experts,
Please give me some inputs related to connection between two views ???

Hi
http://help.sap.com/saphelp_46c/helpdata/de/39/7dfeaaac6011d189c60000e829fbbd/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2cceb190-0201-0010-be88-acdbeb2ad65f
How to acces context of view B from view A without using the controller?
http://help.sap.com/saphelp_nw04s/helpdata/en/7b/67eaa71bdf2645be6e811eee980a04/frameset.htm

SNC connection between two SAProuter

Hi Guys,
Please give me the procedure to establish the SNC connectivity between two SAProuter.
Thanks and Regards,
Atul

Hi Atul,
have tried the SDN Search Function with "snc AND saprouter"? It gave me this Links:
SNC User Guide:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/snc user guide.pdf
Configure Secure Network Communication SNC:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/configure secure network communication snc.pdf
Regards
Gregor

Set a relation between two or more images

Is it possible to create a relation between two or more images?
For example: We have an image in three versions (rgb, cmyk, gray). If I find one of these, I would like to klick on a button like "show correspondend images". So I can see all versions of this images we ever saved.
Any idea?
Best regards!
Roman

I don't think Lightroom handles cmyk images.
For rgb and gray, you can stack the images, or make the gray from a virtual copy of the rgb. In this way, simply unstacking the images results in your requested "show corresponding images".

How to share the data between two or more frames

How to share the data between two or more frames based on the database relationship in JDeveloper?

You can pass data between frames by passing it as parameters.
That is when you are invoking another frame, pass your data as arguments through the constructor to that frame .
You can also achieve this through static or public methods, but static variables as we know is not suggested which might occupy more memory space.
Regards,
Srinivasan AShwath
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
How to share the data between two or more frames based on the database relationship in JDeveloper? <HR></BLOCKQUOTE>
null

How to configure connectivity between two vm linux hosts

Hello All,
i have installed vm workstation with two RHEL4 linux installation.
Node 1:RHEL4
Node 2:RHEL4
i have configured 2 ethernet cards am able to ping in a host but not each other.
i have tried to ping from Node 1 to Node 2 am getting icmp_seq=0 Destination Host Unreachable .....
kindly suggest how to configure connectivity between two host permanently.please explain with example if possible. or suggest any link.
thanks,
Mike.

1003614 wrote:
thanks for quick reply ....Oracle vm workstation 4.2 am using.
... then your post is now moved to the appropriate forum space for your question (Oracle VM for x86).

How to add connection between two Web Part Data Views in sharepoint designer 2013

Hi I have problems with connect two data view
I have a SQL server database named Mini
In Mini database I have two tables: dbo.Table_A and dbo.Table_B
Table_A design and Table_B design
In the internet browser it look like this after I add the connections, the problem is there is no connection when I click at the Blue link id 2 and 3 ??? John's and Jes's Lastname did not show up, the links is dead. that's my problem
The must strange is that, if I do the same below, in sharepoint 2010 designer it do well ?? so what in the .....
Here is my code
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<%@ Page Language="C#" inherits="Microsoft.SharePoint.WebPartPages.WebPartPage, Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register tagprefix="SharePoint" namespace="Microsoft.SharePoint.WebControls" assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register tagprefix="WebPartPages" namespace="Microsoft.SharePoint.WebPartPages" assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<html dir="ltr" xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<meta name="ProgId" content="SharePoint.WebPartPage.Document" />
<meta name="WebPartPageExpansion" content="full" />
<meta http-equiv="X-UA-Compatible" content="IE=10" />
<SharePoint:CssRegistration Name="default" runat="server"/>
</head>
<body>
<form id="form1" runat="server">
<table width="10%"><tr><td>
<WebPartPages:SPWebPartManager runat="server" id="SPWebPartManager">
<SPWebPartConnections>
<WebPartPages:spwebpartconnection ID="g_1660BB6ADC7243088A1BB7F5C196203A" ConsumerConnectionPointID="DFWP Filter Consumer ID" ConsumerID="g_2abfc8f5_0eb3_4711_a5b0_7e7518f56881" ProviderConnectionPointID="DFWP Row Provider ID" ProviderID="g_b70a05bb_a849_423d_8e53_c7ad9ccc18ad">
<WebPartPages:sprowtoparameterstransformer ProviderFieldNames="@ID" ConsumerFieldNames="@ID" />
</WebPartPages:spwebpartconnection>
</SPWebPartConnections>
</WebPartPages:SPWebPartManager>
<asp:ScriptManager runat="server" id="ScriptManager"></asp:ScriptManager>
<WebPartPages:DataFormWebPart runat="server" IsIncluded="True" AsyncRefresh="True" FrameType="None" NoDefaultStyle="TRUE" ViewFlag="8" Title="Table_A on Mini" PageType="PAGE_NORMALVIEW" __markuptype="vsattributemarkup" __WebPartId="{B70A05BB-A849-423D-8E53-C7AD9CCC18AD}" id="g_b70a05bb_a849_423d_8e53_c7ad9ccc18ad" pagesize="10">
<DataSources>
<asp:SqlDataSource id="Table_A_x0020_on_x0020_Mini2" runat="server" __designer:commandsync="true" ProviderName="System.Data.SqlClient" ConnectionString="Data Source=TestMSSQL;User ID=SQLADMIN;Password=079130;Initial Catalog=Mini;" SelectCommand="SELECT * FROM [Table_A] ORDER BY [ID] ASC "/>
</DataSources>
<ParameterBindings>
<ParameterBinding Name="dvt_apos" Location="Postback;Connection"/>
<ParameterBinding Name="ManualRefresh" Location="WPProperty[ManualRefresh]"/>
<ParameterBinding Name="UserID" Location="CAMLVariable" DefaultValue="CurrentUserName"/>
<ParameterBinding Name="Today" Location="CAMLVariable" DefaultValue="CurrentDate"/>
<ParameterBinding Name="dvt_firstrow" Location="Postback;Connection"/>
<ParameterBinding Name="dvt_nextpagedata" Location="Postback;Connection"/>
<ParameterBinding Name="dvt_curselkey" Location="Postback;Connection" DefaultValue="##init##"/>
</ParameterBindings>
<datafields>@ID,ID;@ForeName,ForeName;</datafields>
<XSL>
<xsl:stylesheet xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" version="1.0" exclude-result-prefixes="xsl msxsl ddwrt" xmlns:ddwrt="http://schemas.microsoft.com/WebParts/v2/DataView/runtime" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:SharePoint="Microsoft.SharePoint.WebControls" xmlns:ddwrt2="urn:frontpage:internal">
<xsl:output method="html" indent="no"/>
<xsl:decimal-format NaN=""/>
<xsl:param name="dvt_curselkey">##init##</xsl:param>
<xsl:param name="dvt_apos">'</xsl:param>
<xsl:param name="ManualRefresh"></xsl:param>
<xsl:param name="dvt_firstrow">1</xsl:param>
<xsl:param name="dvt_nextpagedata" />
<xsl:variable name="dvt_1_automode">0</xsl:variable>
<xsl:template match="/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:SharePoint="Microsoft.SharePoint.WebControls">
<xsl:choose>
<xsl:when test="($ManualRefresh = 'True')">
<table width="100%" border="0" cellpadding="0" cellspacing="0">
<tr>
<td valign="top">
<xsl:call-template name="dvt_1"/>
</td>
<td width="1%" class="ms-vb" valign="top">
<img src="/_layouts/15/images/staticrefresh.gif" id="ManualRefresh" border="0" onclick="javascript: {ddwrt:GenFireServerEvent('__cancel')}" alt="Click here to refresh the dataview."/>
</td>
</tr>
</table>
</xsl:when>
<xsl:otherwise>
<xsl:call-template name="dvt_1"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="dvt_1">
<xsl:variable name="dvt_StyleName">Table</xsl:variable>
<xsl:variable name="Rows" select="/dsQueryResponse/NewDataSet/Row"/>
<xsl:variable name="dvt_RowCount" select="count($Rows)"/>
<xsl:variable name="RowLimit" select="10" />
<xsl:variable name="FirstRow" select="$dvt_firstrow" />
<xsl:variable name="LastRow">
<xsl:choose>
<xsl:when test="($FirstRow + $RowLimit - 1) > $dvt_RowCount"><xsl:value-of select="$dvt_RowCount" /></xsl:when>
<xsl:otherwise><xsl:value-of select="$FirstRow + $RowLimit - 1" /></xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="IsEmpty" select="$dvt_RowCount = 0" />
<xsl:variable name="dvt_IsEmpty" select="$dvt_RowCount = 0"/>
<xsl:choose>
<xsl:when test="$dvt_IsEmpty">
<xsl:call-template name="dvt_1.empty"/>
</xsl:when>
<xsl:otherwise>
<table border="0" width="100%" cellpadding="2" cellspacing="0">
<tr valign="top">
<xsl:if test="$dvt_1_automode = '1'" ddwrt:cf_ignore="1">
<th class="ms-vh" width="1%" nowrap="nowrap"></th>
</xsl:if>
<th class="ms-vh" nowrap="nowrap">ID</th><th class="ms-vh" nowrap="nowrap">ForeName</th></tr>
<xsl:call-template name="dvt_1.body">
<xsl:with-param name="Rows" select="$Rows[position() >= $FirstRow and position() <= $LastRow]"/>
<xsl:with-param name="FirstRow" select="1" />
<xsl:with-param name="LastRow" select="$dvt_RowCount" />
</xsl:call-template>
</table>
</xsl:otherwise>
</xsl:choose>
<xsl:call-template name="dvt_1.commandfooter">
<xsl:with-param name="FirstRow" select="$FirstRow" />
<xsl:with-param name="LastRow" select="$LastRow" />
<xsl:with-param name="RowLimit" select="$RowLimit" />
<xsl:with-param name="dvt_RowCount" select="$dvt_RowCount" />
<xsl:with-param name="RealLastRow" select="number(ddwrt:NameChanged('',-100))" />
</xsl:call-template>
</xsl:template>
<xsl:template name="dvt_1.body">
<xsl:param name="Rows"/>
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:for-each select="$Rows">
<xsl:variable name="CurrentRowKey">
<xsl:call-template name="dvt.gencurselkey">
<xsl:with-param name="RowPath" select="." />
</xsl:call-template>
</xsl:variable>
<xsl:variable name="dvt_KeepItemsTogether" select="false()" />
<xsl:variable name="dvt_HideGroupDetail" select="false()" />
<xsl:if test="(position() >= $FirstRow and position() <= $LastRow) or $dvt_KeepItemsTogether">
<xsl:if test="not($dvt_HideGroupDetail)" ddwrt:cf_ignore="1">
<xsl:call-template name="dvt_1.rowview" >
<xsl:with-param name="CurrentRowKey" select="$CurrentRowKey" />
</xsl:call-template>
</xsl:if>
</xsl:if>
</xsl:for-each>
</xsl:template>
<xsl:template name="dvt_1.rowview">
<xsl:param name="CurrentRowKey" />
<tr>
<xsl:if test="position() mod 2 = 1">
<xsl:attribute name="class">ms-alternating</xsl:attribute>
</xsl:if>
<xsl:if test="$dvt_1_automode = '1'" ddwrt:cf_ignore="1">
<td class="ms-vb" width="1%" nowrap="nowrap">
<span ddwrt:amkeyfield="" ddwrt:amkeyvalue="ddwrt:EscapeDelims(string(''))" ddwrt:ammode="view"></span>
</td>
</xsl:if>
<td class="ms-vb">
<a target="_self">
<xsl:attribute xmlns:xsl="http://www.w3.org/1999/XSL/Transform" name="href">
<xsl:variable name="cursel">dvt_curselkey={
<xsl:call-template name="dvt.gencurselkey">
<xsl:with-param name="RowPath" select="." />
</xsl:call-template>
}</xsl:variable>
<xsl:variable xmlns:xsl="http://www.w3.org/1999/XSL/Transform" name="fields">@ID=<xsl:value-of select="ddwrt:ConnEncode(string(@ID))" /></xsl:variable>
<xsl:text>javascript:</xsl:text>
<xsl:value-of select="ddwrt:GenFireConnection(concat('g_2abfc8f5_0eb3_4711_a5b0_7e7518f56881*',$fields),string($cursel))"></xsl:value-of>
</xsl:attribute>
<xsl:attribute name="style">
<xsl:if test="$CurrentRowKey = $dvt_curselkey">font-weight: bold;</xsl:if>
</xsl:attribute>
<xsl:value-of select="format-number(@ID, '#,##0.#;-#,##0.#')" />
</a></td><td class="ms-vb">
<xsl:value-of select="@ForeName" /></td></tr>
</xsl:template>
<xsl:template name="dvt_1.empty">
<xsl:variable name="dvt_ViewEmptyText">There are no items to show in this view.</xsl:variable>
<table border="0" width="100%">
<tr>
<td class="ms-vb">
<xsl:value-of select="$dvt_ViewEmptyText"/>
</td>
</tr>
</table>
</xsl:template>
<xsl:template name="dvt_1.commandfooter">
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:param name="RowLimit" />
<xsl:param name="dvt_RowCount" />
<xsl:param name="RealLastRow" />
<table cellspacing="0" cellpadding="4" border="0" width="100%">
<tr>
<xsl:if test="$FirstRow > 1 or $LastRow < $dvt_RowCount">
<xsl:call-template name="dvt_1.navigation">
<xsl:with-param name="FirstRow" select="$FirstRow" />
<xsl:with-param name="LastRow" select="$LastRow" />
<xsl:with-param name="RowLimit" select="$RowLimit" />
<xsl:with-param name="dvt_RowCount" select="$dvt_RowCount" />
<xsl:with-param name="RealLastRow" select="$RealLastRow" />
</xsl:call-template>
</xsl:if>
</tr>
</table>
</xsl:template>
<xsl:template name="dvt_1.navigation">
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:param name="RowLimit" />
<xsl:param name="dvt_RowCount" />
<xsl:param name="RealLastRow" />
<xsl:variable name="PrevRow">
<xsl:choose>
<xsl:when test="$FirstRow - $RowLimit < 1">1</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$FirstRow - $RowLimit" />
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="LastRowValue">
<xsl:choose>
<xsl:when test="$LastRow > $RealLastRow">
<xsl:value-of select="$LastRow"></xsl:value-of>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$RealLastRow"></xsl:value-of>
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="NextRow">
<xsl:value-of select="$LastRowValue + 1"></xsl:value-of>
</xsl:variable>
<td nowrap="nowrap" class="ms-paging" align="right">
<xsl:if test="$dvt_firstrow > 1" ddwrt:cf_ignore="1">
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent('dvt_firstrow={1}')" />;</xsl:attribute>
Start</a>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent(concat('dvt_firstrow={',$PrevRow,'}'))" />;</xsl:attribute>
<img src="/_layouts/15/images/prev.gif" border="0" alt="Previous" />
</a>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
</xsl:if>
<xsl:value-of select="$FirstRow" />
- <xsl:value-of select="$LastRowValue" />
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:if test="$LastRowValue < $dvt_RowCount or string-length($dvt_nextpagedata)!=0" ddwrt:cf_ignore="1">
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent(concat('dvt_firstrow={',$NextRow,'}'))" />;</xsl:attribute>
<img src="/_layouts/15/images/next.gif" border="0" alt="Next" />
</a>
</xsl:if>
</td>
</xsl:template>
<xsl:template name="dvt.gencurselkey">
<xsl:param name="RowPath" />
<xsl:choose>
<xsl:when test="$dvt_curselkey = '##init##' and position() = $dvt_firstrow">##init##</xsl:when>
<xsl:otherwise><xsl:value-of select="ddwrt:ConnEncode(string($RowPath/@ID))" /></xsl:otherwise>
</xsl:choose>
</xsl:template>
</xsl:stylesheet> </XSL>
</WebPartPages:DataFormWebPart>
</td></tr><tr><td>
<WebPartPages:DataFormWebPart runat="server" IsIncluded="True" AsyncRefresh="True" FrameType="None" NoDefaultStyle="TRUE" ViewFlag="8" Title="Table_B on Mini" PageType="PAGE_NORMALVIEW" __markuptype="vsattributemarkup" __WebPartId="{2ABFC8F5-0EB3-4711-A5B0-7E7518F56881}" id="g_2abfc8f5_0eb3_4711_a5b0_7e7518f56881" pagesize="10">
<DataSources>
<asp:SqlDataSource id="Table_B_x0020_on_x0020_Mini1" runat="server" __designer:commandsync="true" ProviderName="System.Data.SqlClient" ConnectionString="Data Source=TestMSSQL;User ID=SQLADMIN;Password=079130;Initial Catalog=Mini;" SelectCommand="SELECT * FROM [Table_B] ORDER BY [ID] ASC "/>
</DataSources>
<ParameterBindings>
<ParameterBinding Name="dvt_apos" Location="Postback;Connection"/>
<ParameterBinding Name="ManualRefresh" Location="WPProperty[ManualRefresh]"/>
<ParameterBinding Name="UserID" Location="CAMLVariable" DefaultValue="CurrentUserName"/>
<ParameterBinding Name="Today" Location="CAMLVariable" DefaultValue="CurrentDate"/>
<ParameterBinding Name="dvt_firstrow" Location="Postback;Connection"/>
<ParameterBinding Name="dvt_nextpagedata" Location="Postback;Connection"/>
</ParameterBindings>
<datafields>@ID,ID;@LastName,LastName;</datafields>
<XSL>
<xsl:stylesheet xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" version="1.0" exclude-result-prefixes="xsl msxsl ddwrt" xmlns:ddwrt="http://schemas.microsoft.com/WebParts/v2/DataView/runtime" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:SharePoint="Microsoft.SharePoint.WebControls" xmlns:ddwrt2="urn:frontpage:internal">
<xsl:output method="html" indent="no"/>
<xsl:decimal-format NaN=""/>
<xsl:param name="dvt_apos">'</xsl:param>
<xsl:param name="ManualRefresh"></xsl:param>
<xsl:param name="dvt_firstrow">1</xsl:param>
<xsl:param name="dvt_nextpagedata" />
<xsl:variable name="dvt_1_automode">0</xsl:variable>
<xsl:template match="/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:SharePoint="Microsoft.SharePoint.WebControls">
<xsl:choose>
<xsl:when test="($ManualRefresh = 'True')">
<table width="100%" border="0" cellpadding="0" cellspacing="0">
<tr>
<td valign="top">
<xsl:call-template name="dvt_1"/>
</td>
<td width="1%" class="ms-vb" valign="top">
<img src="/_layouts/15/images/staticrefresh.gif" id="ManualRefresh" border="0" onclick="javascript: {ddwrt:GenFireServerEvent('__cancel')}" alt="Click here to refresh the dataview."/>
</td>
</tr>
</table>
</xsl:when>
<xsl:otherwise>
<xsl:call-template name="dvt_1"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="dvt_1">
<xsl:variable name="dvt_StyleName">Table</xsl:variable>
<xsl:variable name="Rows" select="/dsQueryResponse/NewDataSet/Row"/>
<xsl:variable name="dvt_RowCount" select="count($Rows)"/>
<xsl:variable name="RowLimit" select="10" />
<xsl:variable name="FirstRow" select="$dvt_firstrow" />
<xsl:variable name="LastRow">
<xsl:choose>
<xsl:when test="($FirstRow + $RowLimit - 1) > $dvt_RowCount"><xsl:value-of select="$dvt_RowCount" /></xsl:when>
<xsl:otherwise><xsl:value-of select="$FirstRow + $RowLimit - 1" /></xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="IsEmpty" select="$dvt_RowCount = 0" />
<xsl:variable name="dvt_IsEmpty" select="$dvt_RowCount = 0"/>
<xsl:choose>
<xsl:when test="$dvt_IsEmpty">
<xsl:call-template name="dvt_1.empty"/>
</xsl:when>
<xsl:otherwise>
<table border="0" width="100%" cellpadding="2" cellspacing="0">
<tr valign="top">
<xsl:if test="$dvt_1_automode = '1'" ddwrt:cf_ignore="1">
<th class="ms-vh" width="1%" nowrap="nowrap"></th>
</xsl:if>
<th class="ms-vh" nowrap="nowrap">ID</th><th class="ms-vh" nowrap="nowrap">LastName</th></tr>
<xsl:call-template name="dvt_1.body">
<xsl:with-param name="Rows" select="$Rows[position() >= $FirstRow and position() <= $LastRow]"/>
<xsl:with-param name="FirstRow" select="1" />
<xsl:with-param name="LastRow" select="$dvt_RowCount" />
</xsl:call-template>
</table>
</xsl:otherwise>
</xsl:choose>
<xsl:call-template name="dvt_1.commandfooter">
<xsl:with-param name="FirstRow" select="$FirstRow" />
<xsl:with-param name="LastRow" select="$LastRow" />
<xsl:with-param name="RowLimit" select="$RowLimit" />
<xsl:with-param name="dvt_RowCount" select="$dvt_RowCount" />
<xsl:with-param name="RealLastRow" select="number(ddwrt:NameChanged('',-100))" />
</xsl:call-template>
</xsl:template>
<xsl:template name="dvt_1.body">
<xsl:param name="Rows"/>
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:for-each select="$Rows">
<xsl:variable name="dvt_KeepItemsTogether" select="false()" />
<xsl:variable name="dvt_HideGroupDetail" select="false()" />
<xsl:if test="(position() >= $FirstRow and position() <= $LastRow) or $dvt_KeepItemsTogether">
<xsl:if test="not($dvt_HideGroupDetail)" ddwrt:cf_ignore="1">
<xsl:call-template name="dvt_1.rowview" />
</xsl:if>
</xsl:if>
</xsl:for-each>
</xsl:template>
<xsl:template name="dvt_1.rowview">
<tr>
<xsl:if test="position() mod 2 = 1">
<xsl:attribute name="class">ms-alternating</xsl:attribute>
</xsl:if>
<xsl:if test="$dvt_1_automode = '1'" ddwrt:cf_ignore="1">
<td class="ms-vb" width="1%" nowrap="nowrap">
<span ddwrt:amkeyfield="" ddwrt:amkeyvalue="ddwrt:EscapeDelims(string(''))" ddwrt:ammode="view"></span>
</td>
</xsl:if>
<td class="ms-vb">
<xsl:value-of select="format-number(@ID, '#,##0.#;-#,##0.#')"/>
</td><td class="ms-vb">
<xsl:value-of select="@LastName" /></td></tr>
</xsl:template>
<xsl:template name="dvt_1.empty">
<xsl:variable name="dvt_ViewEmptyText">There are no items to show in this view.</xsl:variable>
<table border="0" width="100%">
<tr>
<td class="ms-vb">
<xsl:value-of select="$dvt_ViewEmptyText"/>
</td>
</tr>
</table>
</xsl:template>
<xsl:template name="dvt_1.commandfooter">
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:param name="RowLimit" />
<xsl:param name="dvt_RowCount" />
<xsl:param name="RealLastRow" />
<table cellspacing="0" cellpadding="4" border="0" width="100%">
<tr>
<xsl:if test="$FirstRow > 1 or $LastRow < $dvt_RowCount">
<xsl:call-template name="dvt_1.navigation">
<xsl:with-param name="FirstRow" select="$FirstRow" />
<xsl:with-param name="LastRow" select="$LastRow" />
<xsl:with-param name="RowLimit" select="$RowLimit" />
<xsl:with-param name="dvt_RowCount" select="$dvt_RowCount" />
<xsl:with-param name="RealLastRow" select="$RealLastRow" />
</xsl:call-template>
</xsl:if>
</tr>
</table>
</xsl:template>
<xsl:template name="dvt_1.navigation">
<xsl:param name="FirstRow" />
<xsl:param name="LastRow" />
<xsl:param name="RowLimit" />
<xsl:param name="dvt_RowCount" />
<xsl:param name="RealLastRow" />
<xsl:variable name="PrevRow">
<xsl:choose>
<xsl:when test="$FirstRow - $RowLimit < 1">1</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$FirstRow - $RowLimit" />
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="LastRowValue">
<xsl:choose>
<xsl:when test="$LastRow > $RealLastRow">
<xsl:value-of select="$LastRow"></xsl:value-of>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$RealLastRow"></xsl:value-of>
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="NextRow">
<xsl:value-of select="$LastRowValue + 1"></xsl:value-of>
</xsl:variable>
<td nowrap="nowrap" class="ms-paging" align="right">
<xsl:if test="$dvt_firstrow > 1" ddwrt:cf_ignore="1">
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent('dvt_firstrow={1}')" />;</xsl:attribute>
Start</a>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent(concat('dvt_firstrow={',$PrevRow,'}'))" />;</xsl:attribute>
<img src="/_layouts/15/images/prev.gif" border="0" alt="Previous" />
</a>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
</xsl:if>
<xsl:value-of select="$FirstRow" />
- <xsl:value-of select="$LastRowValue" />
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:if test="$LastRowValue < $dvt_RowCount or string-length($dvt_nextpagedata)!=0" ddwrt:cf_ignore="1">
<a>
<xsl:attribute name="href">javascript: <xsl:value-of select="ddwrt:GenFireServerEvent(concat('dvt_firstrow={',$NextRow,'}'))" />;</xsl:attribute>
<img src="/_layouts/15/images/next.gif" border="0" alt="Next" />
</a>
</xsl:if>
</td>
</xsl:template>
</xsl:stylesheet> </XSL>
</WebPartPages:DataFormWebPart>
</td></tr></table>
</form>
</body>
</html>

Hey Bale
Yes I use sharepoint designer 2013, when I do the same in sharepoint designer 2010, it do well
No to your question 2, 3 and 4
See again my picture below her, when I open the internet browser
in the database you have a table with forename and another table with last name,
the link between this two table is the id, when I open it is ok, Bens lastname is
James, Ben James.
So when I try to click on the blue id number 2 beside John, Johns Last name
should show up, but it did not, the link is dead. that's my problem the funny about this when I
do the same procedure see above in sharepoint designer 2010, it do well ?
Here is my first steps, when you have uploaded the first datasource, you need to save, place your courser
behind the <asp:ScriptManager runat="server" id="ScriptManager"></asp:ScriptManager> x PLACE COURSER HER
THEN you can upload the next datasource, the sharepoint designer automatic generate the code for the grid.
When you have the two grids inside the aspx file, place your courser behind the first
<WebPartPages:DataFormWebPart X <---
then the tab "option" show up and inside here you can add the connections between the two grids.

Connection between two or more outputs of PCI-DIO96

Similar Messages

Maybe you are looking for