Connection between two routers

Can´t ping from pc10 to pc15. It get's stuck on router4, because the communication between router4 and router2 is failling.
I would appreciate if somebody could help me!
Thanks in advance.

I dont have Packet tracer...
What is the ip address of the pc's?
Do you have route for both subnets in all routers?
Thanks,
Madhu.

Similar Messages

Wireless Connection between two routers

Ok. I own two houses seperated by a driveway going to both garages. I have cable internet access linked to a Netgear WNDR3300. That router is sending a signal to a wireless PC, 2 Laptops, and my Mini when needed. My signal in the 2nd house is REALLY weak.
I have a WRT54GS v4.0 sitting around and it to connect to the netgear and then resend a wireless signal to the wireless laptops around the 2nd house. can I do this? if so. HOW?

Is your Linksys Router is connected hardwired to the Netgear Router ?
If your both trhe router is connveted via cable...you can get the wireless signal from both the router.However your purpose will not get resolved because you want to repeat or extend the signal.In my opinion you may get a wireless Range Expander to resolve your Problem.

Wi-fi bridge between two routers TP-LINK WR841ND (WDS). HP 1536 dnf MFP connect to one of this routers (copper). My Ipad or Iphone can't find HP 1536 dnf MFP (using Eprint). Ipad and iphone connect to router across WiFi.

Hello.
I have wi-fi bridge between two routers TP-LINK WR841ND.
The name of this technology - WDS.
HP Laser JET 1536 dnf MFP connect to one of this routers (copper).
Second device (my NETBOOK) connect to second router (WiFi).
I have good communication between NETBOOK and HP Laser JET 1536 dnf MFP via WiFI-bridge.
In usual case NETBOOK can find (and can Ping) network printer and make a print some files.
But my Ipad or Iphone can't find HP Laser JET 1536 dnf MFP (using Eprint). Ipad and iphone connect
to router across WiFi.
Please, help!

Are you using the ePrint Mobile App, the ePrint Printer Control App, or just trying to send an email to the printer's ePrint email address?
Does AirPrint work?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

RFC connection between two SAP systems (with SAP router)

Hi!
I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
The network connection between the servers is VPN.
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
my server --> customer
my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
Back-way
SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
something like:
/H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
Thank you very much!
regards
Thom

Same answer as in the other forum where you cross posted....

Setting up back-to-back async connection between 2 routers

Hi,
I am trying to setup a back-to-back async connection between 2 routers via the async serial interface. The connection between the two routers are via a smart serial to RS232 male(CAB-SS-232MT) cable connecting to another RS232 female to smart serial (CAB-SS-232FC) cable. What I am trying to do is to push the async data from one router (Router A) to another router (Router B).
When I try to capture the async data from the async serial interface on the source router (Router A) while disconnecting the back-to-back connection from Router B, it is showing the correct data. The data capture is via the smart serial to RS232 male cable connecting to Router A, to a PC via hyperterminal. But however, when the back-to-back connection is connected and I try to do a reverse telnet at Router B opening up the port for the async interface on Router B, it seems to be showing incorrect data. I have confirmed that the speed and configurations on both routers are matched.
Does it require to have two physical async modems in between both routers for signalling? Any experts who are familiar with such setups can advise on why the async data at Router B appear as incorrect with unreadable characters? Any help is greatly appreciated.

Hey Sebastian,
Had the same issue, which I just managed to get it resolved.
When you insert the modem, the router will create an Async interface for it lets say Async 0/1/0
then all what you've to do is:
chat-script DialOut ABORT ERROR ABORT BUSY "" "AT" OK "ATDT \T" TIMEOUT 45 CONNECT \c
line 0/1/0
exec-timeout 0 0
script dialer DialOut
modem InOut
transport preferred none
transport input all
transport output all
stopbits 1
speed 115200
flowcontrol hardware
and to dial a the remote router all what's required is:
reverse telnet to the above line (show line to know the line number) then type atdt
Let me know in case you still get issues

How to make a connection between two wireless sensor networks of different groups through gateway?did any external device or coding is needed?

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

How to check the Network Connectivity between two systems.

Hello Everyone,
Please let me know different ways to check the network connectivity between two systems other than ping/traceroute commands.
Thank You.
Edited by: 835435 on Jan 20, 2012 11:43 AM
Edited by: 835435 on Jan 20, 2012 11:44 AM

Use snoop.
snoop -d <nic> - will give requests and replies coming/going in/out of the specified NIC.
snoop -d <nic> <MAC address of the target host> - will give requests coming from the required host.

The connection between two Tuxedo machines

We want to locate our servers(services) onto different machines, we want to know
:whether the connection,between two machines, is built up at the first time the
servers booted and kept persistently connectted, or just build up the connection
when there comes a request.

Remote machines connect to one another lazily. If you have machines A
(master), B and C, then B and C do not connect until a request is made
between B and C. All machines connect to the master at boot time.
roopesh wrote:
>
The connection is persistent and is not request based.
The machines communicate using BRIDGE.The DBBL which runs
on the primary master machines keep doing sanity checks
and health of BBL at all the machines connected and if
any BBL does not respond for the specified time(set by
DBBLWAIT) in RESOURCES section.then that machine gets partitioned by DBBL.
for more info you can read tuxedo documentation.
Thanks
Roopesh
"YANG YI" <[email protected]> wrote:
We want to locate our servers(services) onto different machines, we want
to know
:whether the connection,between two machines, is built up at the first
time the
servers booted and kept persistently connectted, or just build up the
connection
when there comes a request.

Gprs connection between two mobile phones

Hi
is it possible to make a gprs connection between two mobile phones without a server(pc...)? when the answer "yes" please give me an exapmle...

I'm not sure, I'm just connecting some facts. I'm talking about Siemens S55. It has implemented sockets (both client sockets and server sockets). The phone, when connected via GPRS has IP address (Siemens' netmonitor reports it..). But i've never tried to use server-socket on my mobile.
So it seems that it is in fact possible on some handsets. (AFAIK nokia 6610 and similar does not support sockets...)

Connection between two views

Hi Experts,
Please give me some inputs related to connection between two views ???

Hi
http://help.sap.com/saphelp_46c/helpdata/de/39/7dfeaaac6011d189c60000e829fbbd/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2cceb190-0201-0010-be88-acdbeb2ad65f
How to acces context of view B from view A without using the controller?
http://help.sap.com/saphelp_nw04s/helpdata/en/7b/67eaa71bdf2645be6e811eee980a04/frameset.htm

Connection between two clients

Hi,
I want to get some guidance on connection between two clients. Suppose I need to connect client 500 with client 900 in the same system without changing the logical names.
Thanks & Regards
Nabarun

Nabarun -
It almost sounds as if you just want an RFC to go from one client to the other. RFCs (SM59) are not client dependant so you can create one in any client. You can create one with the system name and point it to the client number using a specific user and password. I would recommend for security it be a communications user and not a dialog user depending on what you will be sending between the clients. However, the user will need the correct permissions and again, depending on what you are trying to accomplish, it may have to be a DIAG user although I would be wary. Then create a 2nd RFC pointing back to the other client. For example...
RFC 1
System Name = <System>
Client = 500
User = <userid in clnt 500>
RFC 2
System Name = <System>
Client = 900
User = <userid in clnt 900>
Then when you are in client 500, there is a path/connection to client 900 via that clients ID and password and vice versa using the appropriate RFC. Again, with out more info on what you are attempting, this may be your solution. Hope this helps. Good luck
Regards,
Zecher

SNC connection between two SAProuter

Hi Guys,
Please give me the procedure to establish the SNC connectivity between two SAProuter.
Thanks and Regards,
Atul

Hi Atul,
have tried the SDN Search Function with "snc AND saprouter"? It gave me this Links:
SNC User Guide:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/snc user guide.pdf
Configure Secure Network Communication SNC:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/configure secure network communication snc.pdf
Regards
Gregor

How to configure connectivity between two vm linux hosts

Hello All,
i have installed vm workstation with two RHEL4 linux installation.
Node 1:RHEL4
Node 2:RHEL4
i have configured 2 ethernet cards am able to ping in a host but not each other.
i have tried to ping from Node 1 to Node 2 am getting icmp_seq=0 Destination Host Unreachable .....
kindly suggest how to configure connectivity between two host permanently.please explain with example if possible. or suggest any link.
thanks,
Mike.

1003614 wrote:
thanks for quick reply ....Oracle vm workstation 4.2 am using.
... then your post is now moved to the appropriate forum space for your question (Oracle VM for x86).

Dot1q between two routers connected via 2950

Hi,
I have two 7200's connected to a 2950 (FE 22 + FE 24 - Both configured as trunks).
On the 7200's, I have the following:
7200-A
interface FastEthernet0/0.23
encapsulation dot1Q 23
ip address 192.168.1.1 255.255.255.252
no snmp trap link-status
7200-B
interface FastEthernet0/0.23
encapsulation dot1Q 23
ip address 192.168.1.2 255.255.255.252
no snmp trap link-status
2950:
interface FastEthernet0/22
switchport mode trunk
no ip address
duplex full
speed 100
interface FastEthernet0/24
switchport mode trunk
no ip address
duplex full
speed 100
But I cannot ping between the two routers?

7200-A has dot1q ints for servers connected to the 2950 (Access Ports)....these are all currently successfully trunked down FE24
I want to connect 7200-B to 7200-A, and have dot1q Ints on both routers(As /30's) that can communicate (They will be used on 7200-B as Internet gateways for VRF's (With IP Nat enabled)....I was hoping that by having 7200-B connected to 2950 FE22, and configuring that port as a trunk also, that the dot1q ints on both routers could talk.
vlan 23 does exist on 2950, and is being trunked on both FE 22 + FE 24
I dont have any spare FE ports on 7200-A, hence the reason for me connecting 7200-B to the 2950.

Load balancing between two routers

I have two routers connected through the LAN connection. The first one is using as routing protocol EIGRP, the other one is part of the managed service and I do not have access to it. I would like to make a load balancing between the two of them by redistributing the static routes in EIGRP. When I tried this, I am loosing the EIGRP entry for this route in the routing table. I would like to have both of them , so we could have traffic sharing. I appreciate if you give me any hints.

Raju,
you have two choices as far as I can see. If you want to use static routing over the WAN to your branch, you could duplicate your static routes to the branch and point them to the secondary router. You will have two identical sets of static routes in the primary router, one set pointing to the WAN interface and the other one pointing to the secondary router.
ip route x.x.x.x "WAN-interface"
ip route x.x.x.x "secondary router"
ip route y.y.y.y "WAN-interface"
ip route y.y.y.y "secondary router"
etc.
As a result the primary router will have two routes to the branch and will load-balance. If one next-hop fails (either the WAN interface or the secondary router), only the other will be used. If the next-hop comes back up, load-balancing will resume.
The other choice would be to use EIGRP over the WAN, and make sure the two routers become EIGRP neighbors. Then you can use the "variance" command to achieve unequal cost load-balancing between the two routers. Let me know if you need more information about this, but i think static routes will be sufficient in your situation.
HTH, Thomas

Connection between two routers

Similar Messages

Maybe you are looking for