Connection broken during update

hi !
i was updating software of my N82 during that my phone connection was broken when i restarted the phone it is showing blank white screen only and not proceeding what should i do now ? plz let me know as soon as possible

Hi, what you should do is described in this guide on how to recover from a failed fw update: /t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/td-p/398147

Similar Messages

Connection Lost during update::solutions

I don't want to give you guys false hopes and tell you that this is a surely working fix. Just try these and if none worked, keep digging. If you have more "solutions" add them here.
To all who have this issue, I have tried to fix it since last year by trying to update my N86. Then last night, when Belle was rolled out, I had it again while trying to update my N8. Same issue, but I fixed it. I've been trying for 8 hours and these are some of the solutions suggested on the web (but none worked for me):
> wait for 15 minutes (I've waited for 30, nothing happens. Stop wasting your time and proceed!)
> remove sim/memory card
> connect with Mass Storage mode
> soft reset (also suggested were hard reset, but I think that is best left as a last resort)
> turn off your firewall, and possibly even your security software
> get the latest Suite (I know Nokia keeps repeating this, but I can't believe how many people just ignore this even if they have the older versions)
> delete the 20019119 (not sure) folder in Mass Storage drive under 'private' folder
> restart your computer (worked for some)
> run Nokia Suite as administrator (worked for some)
> redownload the firmware by going to C:\ProgramData\Nokia\Nokia Suite\.....\Variants\ and rename the device folder (eg. RM-596 to RM-596elop), Nokia Suite will redownload the firmware and waste more of your time. Go grab a drink. Preferably coffee, to keep you awake.
> do an online scan for malware/trojan/whatever-not-good, and clean them
Those are the "solutions" I've tried, and failed to see any results. Lastly, THIS WORKED FOR ME.
USE ANOTHER COMPUTER.
or try using another user account and guest account for those who don't have another computer.
Yes, that's it. Funny right? Turns out Windows can mess things up but puts the blame on Nokia phones. Just get another computer, don't sync with it, but just let it back up. If you have a slow connection to redownload the firmware, then just go to the said directory above to copy the file into the new computer. Nokia will detect it (make sure it's in the same folder as in the original computer) and proceed. Good luck to you all!
*Issue on security code during installation is that Nokia Suite will say do not touch your phone even if it asks for language selection or security code. It just asks to enter PIN when phone asks for it. But I've noticed after the first reboot, the second reboot won't proceed until you enter your security code! If you just leave it, it wouldn't reboot the second time. That's the only issue I have during installation. Hope you guys get it!

Finally, I got it to work!
Read the tip from designrs187, didn't read the addition at first, so I went to the hardware section on the control panel, clicked on 'Nokia USB phone parent' and told Windows to look for updates. It updated the driver after which installation of the update finally started!
Guess it does the same as the tip I intended to use.
Man, I hate this Nokia BS!

IPhone4 Stuck on ITunes connect screen during update

During the update, Itunes had an Error and therefore just closed, however, my Iphone just stopped and went to the screen showing it, the wire to connect to a USB to connect to ITunes. But whenever I connect to Itunes, it does not connect/ show up, it does not find anything. I have tried Hard Reseting it 500 times, still has not worked!!!
Help please!!!!

I bought an iPhone 4 from a friend.
But he had the iPhone jailbroken, but I thought that was no problem until 1 hour later that I heard
that you can't update the phone + I wanted to reset all his settings and media (factory settings).
So i plugged it into iTunes on PC (SONY VAIO) and pressed restore and later when de updatedata was complete
the screen stayd stuck into the iTunes connect screen (on the iphone). ( it won't go to homescreen etc. )
Can someone help me with this problem please?
I don't know what to do with this.
IPhone: 4 (NOT 4S !)
My iOS Version: 5.1.1
https://discussions.apple.com/thread/4271877

MySQL connection broken after update

ErrorCode=-2147467259
DataSource.Error: MySQL: Unable to connect to any of the specified MySQL hosts.
Details:
    Message=Unable to connect to any of the specified MySQL hosts.
Had zero issues prior to recent office update. Running 64bit everything for big data. Connecting to localhost.
I am still learning here and suspect some sort of problem with finding the database connector now. Earlier I had messages something like "unable to find invariant="MySql.Data.MySqlClient"".
This is currently in the machine.config v4.0.30319 file:
<system.data>
    <DbProviderFactories>
      <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=6.9.5.0,
Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
    </DbProviderFactories>
</system.data>
This is currently in the machine.config v2.0.50727 file:
<system.data>
    <DbProviderFactories>
      <add name="Odbc Data Provider" invariant="System.Data.Odbc" description=".Net Framework Data Provider for Odbc" type="System.Data.Odbc.OdbcFactory, System.Data, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089" />
      <add name="OleDb Data Provider" invariant="System.Data.OleDb" description=".Net Framework Data Provider for OleDb" type="System.Data.OleDb.OleDbFactory, System.Data, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089" />
      <add name="OracleClient Data Provider" invariant="System.Data.OracleClient" description=".Net Framework Data Provider for Oracle" type="System.Data.OracleClient.OracleClientFactory, System.Data.OracleClient,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
      <add name="SqlClient Data Provider" invariant="System.Data.SqlClient" description=".Net Framework Data Provider for SqlServer" type="System.Data.SqlClient.SqlClientFactory, System.Data, Version=2.0.0.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089" />
      <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=6.9.5.0,
Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
    </DbProviderFactories>
</system.data>
I have tried uninstalling and reinstalling office and MySQL connectors - ODBC which was working previously and also net. Other programs which access MySQL are still working great as well as ADO with VBA. I have the same setup (Power Query, MySQL)
on 2 other machines which have not been updated and all is well there, which leads me to believe that something in the update caused this problem. Do I need to set a path to a connector?
Wondering if I am the only one with this issue and if anyone can point me in the right direction to solve this ASAP.
Thanks

Anybody have another suggestion for b2002 to try?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Exchange connection broken after update?

Used to use exchange to connect to work e-mail from my razr maxx. Phone made a forced update today and now I cannot get my exchange e-mail to connect (Connection to Server Failed).
I've looked around the internet - only real suggestion I've found is to delete & re-add the account. I've tried to do that a number of times, but when it tries to set up, it can't connect to server.
What do I need to do?

Kosenga, Exchange email is such an important part of a smartphone and I want to make sure yours is working correctly. The next software update will include some enhancements to Exchange, but you should still be able to connect now. Which software version do you show in Settings, About, Software? The next step I recommend is completing a factory reset http://bit.ly/PfOnz8.
Please let me know if you need further assistance after this.
MarquiaF_VZW
Follow us on Twitter @VZWSupport

3.0.04.37: All connections lost during update

Hello out there,
I just updated SQL Developer from EA4 to Production and lost all my connections. Luckily I could start EA4 and export my connections. These could then be imported into 3.0.04.37, so this is not a great issue, but you should be aware of this trap.
I'm using Windows XP SP3 with the JDK shipped with SQL Developer. I renamed the SQL Developer directory before extracting the new one.

It seems that some of the preferences did not survive the upgrade too.
The NLS-Settings seem to be okay, but my switched Hotkeys (F6 for explain and F10 for autotrace) are not.
I set it up that way because it was the default in one of the early versions (I think it was 1.2 or so) and I got used to it this way. After upgrade form EA4 (which imported all preferences correctly), F6 called autotrace and I had to correct this manually.

Connection lost during update plz help

my mobile is nokia 6680 while i was updating my mobile software there was a sudden power cut in my apartment,n my mobile isn't responding. its not even switching on, not showing any thing on d display screen.can it work like before or its completely useless.can u plz tel me
waiting for ur reply..................
Moderator note: E-mail address removed.Message Edited by sphere_s on 06-Nov-2007 06:52 AM

Finally, I got it to work!
Read the tip from designrs187, didn't read the addition at first, so I went to the hardware section on the control panel, clicked on 'Nokia USB phone parent' and told Windows to look for updates. It updated the driver after which installation of the update finally started!
Guess it does the same as the tip I intended to use.
Man, I hate this Nokia BS!

During update my ATV2 displayed icon to connect to iTunes. Now I have nothing -- can't even get to menu to do restart and ATV2 doesn't show up in iTunes menu to do restart from there. Help!

During update my ATV2 displayed icon to connect to iTunes. Now I have nothing -- can't even get to menu to do restart and ATV2 doesn't show up in iTunes menu to do restart from there. Help!

The update didn't apply correctly.
Did you follow the steps exactly in order to restore? disconnect all cables, open iTunes, then connect micro usb
Apple TV (2nd and 3rd generation): Restoring your Apple TV
Make sure to connect directly to computer, not a keyboard port or USB hub. Try a different cable.

App hung on "waiting"; during update, I lost my wifi connection; now cannot delete to reinstall (no X), syc does not help; itunes store says it is installed and I cannot reinstall; deleting from itunes and synching does not remove "hung app"; HELP

App hung on "waiting"; during update, I lost my wifi connection and the app hung; now cannot delete to reinstall (no X), synching does not help; itunes app store says it is installed, therefore I cannot reinstall; deleting the app from itunes and synching does not reinstall the app on the ipod; the app developers have not helped and told me to check with Apple (which I am doing, since I am past my 90 day tech support). Hoping someone can help with this hung "waiting' app problem.

- First try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next download the app on the computer and try to sync.
- Last, restore from backup.

Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store

Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store error 306. I am using windows 7.

(Apologies for butting in, wha.)
now older version is not able to connect to itunes store error 306. I am using windows 7.
If you still get the 306 after updating to 10.6.1.7, perhaps try the following user tip:
iTunes for Windows 9.0.x: Error 306

Sessions/connections gets hang during update and select operations.

A table with 3 million records, which has customer details data.
Everyday application is executing select and update queries on that table.
Sessions/connections gets hang during update and select operations.
After checking ADDM report, following are the findings:
Please suggest the solutions
Findings and Recommendations
Finding 1: Row Lock Waits
Impact is 145.22 active sessions, 99.77% of total activity.
SQL statements were found waiting for row lock waits.
Recommendation 1: Application Analysis
Estimated benefit is 145.22 active sessions, 99.77% of total activity.
Action
Significant row contention was detected in the TABLE
"AVAYA.AIRTEL_CUSTOMER_MASTER" with object ID 82155. Trace the cause of
row contention in the application logic using the given blocked SQL.
Related Object
Database object with ID 82155.
Rationale
The SQL statement with SQL_ID "974vg65j29pmv" was blocked on row locks.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The session with ID 50 and serial number 34525 in instance number 1 was
the blocking session responsible for 100% of this recommendation's
benefit.
Symptoms That Led to the Finding:
Wait class "Application" was consuming significant database time.
Impact is 145.22 active sessions, 99.77% of total activity.
Finding 2: Top SQL Statements
Impact is 46.39 active sessions, 31.87% of total activity.
SQL statements consuming significant database time were found. These
statements offer a good opportunity for performance improvement.
Recommendation 1: SQL Tuning
Estimated benefit is 46.39 active sessions, 31.87% of total activity.
Action
Investigate the UPDATE statement with SQL_ID "974vg65j29pmv" for
possible performance improvements. You can supplement the information
given here with an ASH report for this SQL_ID.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The SQL spent only 0% of its database time on CPU, I/O and Cluster
waits. Therefore, the SQL Tuning Advisor is not applicable in this case.
Look at performance data for the SQL to find potential improvements.
Rationale
Database time for this SQL was divided as follows: 100% for SQL
execution, 0% for parsing, 0% for PL/SQL execution and 0% for Java
execution.
Rationale
SQL statement with SQL_ID "974vg65j29pmv" was executed 212 times and had
an average elapsed time of 2494 seconds.
Rationale
Waiting for event "enq: TX - row lock contention" in wait class
"Application" accounted for 100% of the database time spent in
processing the SQL statement with SQL_ID "974vg65j29pmv".

**addm report **
          ADDM Report for Task 'TASK_7526'
Analysis Period
AWR snapshot range from 5003 to 5004.
Time period starts at 08-JUL-13 11.00.27 AM
Time period ends at 08-JUL-13 12.00.45 PM
Analysis Target
Database 'AVAYADB' with DB ID 2878789264.
Database version 11.2.0.1.0.
ADDM performed an analysis of instance avayadb, numbered 1 and hosted at
NG-LA04AVAYA01.
Activity During the Analysis Period
Total database time was 563062 seconds.
The average number of active sessions was 155.63.
Summary of Findings
   Description         Active Sessions      Recommendations
                       Percent of Activity
1 Row Lock Waits      155.44 | 99.88       1
2 Top SQL Statements 26.67 | 17.14        1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          Findings and Recommendations
Finding 1: Row Lock Waits
Impact is 155.4 active sessions, 99.88% of total activity.
SQL statements were found waiting for row lock waits.
   Recommendation 1: Application Analysis
   Estimated benefit is 155.44 active sessions, 99.88% of total activity.
   Action
      Significant row contention was detected in the TABLE
      "AVAYA.AIRTEL_CUSTOMER_MASTER" with object ID 82155. Trace the cause of
      row contention in the application logic using the given blocked SQL.
      Related Object
         Database object with ID 82155.
   Rationale
      The SQL statement with SQL_ID "974vg65j29pmv" was blocked on row locks.
      Related Object
         SQL statement with SQL_ID 974vg65j29pmv.
         UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
         WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
   Rationale
      The session with ID 167 and serial number 6084 in instance number 1 was
      the blocking session responsible for 100% of this recommendation's
      benefit.
   Symptoms That Led to the Finding:
      Wait class "Application" was consuming significant database time.
      Impact is 155.45 active sessions, 99.88% of total activity.
Finding 2: Top SQL Statements
Impact is 26.66 active sessions, 17.14% of total activity.
SQL statements consuming significant database time were found. These
statements offer a good opportunity for performance improvement.
   Recommendation 1: SQL Tuning
   Estimated benefit is 26.67 active sessions, 17.14% of total activity.
   Action
      Investigate the UPDATE statement with SQL_ID "974vg65j29pmv" for
      possible performance improvements. You can supplement the information
      given here with an ASH report for this SQL_ID.
      Related Object
         SQL statement with SQL_ID 974vg65j29pmv.
         UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
         WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
   Rationale
      The SQL spent only 0% of its database time on CPU, I/O and Cluster
      waits. Therefore, the SQL Tuning Advisor is not applicable in this case.
      Look at performance data for the SQL to find potential improvements.
   Rationale
      Database time for this SQL was divided as follows: 100% for SQL
      execution, 0% for parsing, 0% for PL/SQL execution and 0% for Java
      execution.
   Rationale
      SQL statement with SQL_ID "974vg65j29pmv" was executed 707 times and had
      an average elapsed time of 794 seconds.
   Rationale
      Waiting for event "enq: TX - row lock contention" in wait class
      "Application" accounted for 100% of the database time spent in
      processing the SQL statement with SQL_ID "974vg65j29pmv".
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          Additional Information
Miscellaneous Information
Wait class "Commit" was not consuming significant database time.
Wait class "Concurrency" was not consuming significant database time.
Wait class "Configuration" was not consuming significant database time.
Wait class "Network" was not consuming significant database time.
Wait class "User I/O" was not consuming significant database time.
Session connect and disconnect calls were not consuming significant database
time.
Hard parsing of SQL statements was not consuming significant database time.

Error during RETR epilogue: FTPEx: 426 Data connection: Broken pipe

Hi Experts,
We have XI file to file transfer configured via the ftp...
while im trying to upload the file from the source folder to target folder, im getting the following error: which i have tried to resolve but not able to...
help in this regard will be greatly appreciated:
"Could not process due to error: java.lang.IllegalStateException: Error during RETR epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 426 Data connection: Broken pipe."
Regards,
nandan

if I were you I would put the lines
kkSocket.setSendBufferSize(1024);
kkSocket.setSoTimeout (10000);
kkSocket.setTcpNoDelay(true);
before connecting to the server, not after the initial message was sent.

5300 Dead after connection was lost during update

5300 Dead after connection was lost during update. Won't turn on, power up-nothing. Help?

It is now dead.
Take to a nokia care point.
Care points:
UK
http://www.nokia.co.uk/A4228006
Europe:
http://europe.nokia.com/A4388379
Elsewhere:
http://www.nokia.com and select your country.

My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

Hi HARISH INDIA,
That is not good but lets see if we can get it back to life. If you can, see if you can put your iPhone into recovery mode and then use iTunes to restore it. If you can get it to restore, it will erase everything off your iPhone. If you have a back up in iTunes or iCloud then you can put that on after the restore is complete. Take a look at the article below for more information.
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT201263
Take it easy,
-Norm G.

HT5192 I cant update my mibile always i got the same message. An error occurrd during updating and sime times cannot establish connection ?!!!!

I cant update my mibile always i got the same message. An error occurrd during updating and sime times cannot establish connection ?!!!!

Hi Martha Leal Tapia,
Yes this issue was resolved. I had to add the below two parameters in the instance profile and continue the installation.
icm/server_port_1 = PROT = P4, PORT = 5$(SAPSYSTEM)04, HOST = <full hostname as in the /etc/hosts file>
icm/host_name_full=<full hostname as in the /etc/hosts file>
Note 1158626 P4 connection to ICM on machine with multiple IPs fails.
You can refer following SAPnote # 609603 for the above concepts although this refers to old release."
Thanks and regards
Ananth

Connection broken during update

Similar Messages

Maybe you are looking for