Connection closed message by RFC function module.

Hi experts,
I have an RFC function module where I have no own exception defined. I use 'standard' ones.
EXCEPTIONS
  communication_failure = 1 MESSAGE ls_proto-message
  system_failure        = 2 MESSAGE ls_proto-message
Inside this FM I do update of database table using MODIFY dbtab statement.
In some cases I get exception 'Conection closed' as a message.
Does anybody know what this message means?
Could it be temporary connection failure or timeout by table update?
Thanks a lot.

HI,
then it is a temporary failure ..when u get this message ..what u can do is GOTO SM59->try to do a test connection with the destination logical system(Other Sap system)..see if u r able to login...If u r able to login then the RFC connection is fine otherwise we need to check in detail in which cases we are getting the error..
Regards,
Nagaraj

Similar Messages

  • Regarding RFC Function module in Multimapping

    Hi All
    I am trying to use RFC function module in Multimapping at target side.I want to call RFC Function based on some condition, if condition fails i dont want to call the Function Module. So i need to change the occurance of target RFC Message to 0...1 When
    i try to change occurance in messages tab, it is displaying message that RFC Function module not found. When i change 
    occurance to 1..1, then it is showing RFC structure in mapping properly. I am suspecting why it is behaving like this.
    Can we use RFC Function Module in Multimapping??. Please share ur experience on this.
    Thanks,
    Balu

    Hi,
      Can any body cofirm how below sender message will behave in Interface Determination,
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_FILE1 xmlns:ns0="http://ctrlanddataconceptsinglereceiver">
    <Structure>  
    <***>male</***>
       <ID>12</ID>
       <Desig>cons</Desig>
       <Sal>1000</Sal>
    </Structure>
    <Structure>  
    <***>female</***>
       <ID>12</ID>
       <Desig>cons</Desig>
       <Sal>1000</Sal>
    </Structure>
    </ns0:MT_FILE1>
    In my interface determination, i will add 2 inbound interfaces and two mappings.
    For first interface i will check condition like if Structure/***=male then it has to goto one receiver agreement
    For second interface i will check condition like if Structure/***=female, then it has to goto another receiver agreement.    
    But in my sender payload *** is male and female also. Will it execute 2 receiver agreements???.
    My openion is it will go through 2 interface mappings and it will execute 2 receiver agreements.
    Thanks,
    Balu.

  • RFC Function module-With Only Request message

    Hi
    i need a RFC with only Request message and Response message is not required.
    please help me, how to create a RFC function module with out Response message, and it should contain only Request message.
    i have created RFC in this way:
    RFC doesn't contain neither import nor export parameters. and i have defined one table in TABLE tab which refers to a ztable created already.
    when i imported RFC into XI i came to know that RFC has both Request and Response messages, but i don't need Response message.
    Thanks in advance..help would be appreciated
    Regards,
    Rajesh

    Thankx Michal,
    I have written ZRFC this way:
    insert ZMM_AUTO_GR from INPUT_TABLE .
      if sy-subrc = 0.
        commit work.
      else.
       rollback work.
    im not using neither import nor export parameters..but using only tables parameters. but when imported in XI im getting same table  structure in both request an response.
    please suggest what changes required in above code to invoke my ZRFC in async way.
    you will not get any response in XI- what chages required in my code to dnt get .reponse in XI.
    appreciate your help.
    Regards,
    Rajesh.

  • Message text available in java using RFC function module

    Hello,
    I wrote a function module with the ABAP statement
    MESSAGE .... RAISING PARAMETER_ERROR
    The java developer gets the PARAMETER_ERROR but no
    message text.
    Is the any way (e.g. exception class) to get the message text also.
    Thanks

    hi Michael,
    In the RFC function module use the table RETURN of type BAPIRET2 and instead of raising the error append the error in RETURN. later in your java code you can read this table RETURN and retrieve the error along with the error text.
    Hope this helps.
    Regards,
    Richa.

  • Problem while importing RFC function module in XI. Please Help!

    Hi Experts,
               When I try to import RFC function module in XI I get the following error:
                 **Ready for import**
    Import started...
    YCOP_VALIDATE_GR:
      + com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: connection closed without message (CM_NO_DATA_RECEIVED)
    Import failed with 1 error
    Any idea why is this error? How to resolve this?
    Thanks
    Gopal

    Hi
       The problem still persists.
       This is what I have done:
        1. My FM is RFC enabled. In the "Attribute" tab of the FM I have selected "Remote-enabled module" and "Start immed".
    2.Activated and tested the FM.
    3.Released the FM. In se37, Function Module -> Release ->Release. 
    4.Tried to import this FM in XI under "RFC". Get the same error.
    I have some questions:
    1. After releasing the FM do I have to activate it?
    2. In release there is "Internal Release" Do I have to use that?
    3.Do I have to do "Internal Release" first then "Release"?
    4.The FM i am trying to import makes a call to another FM. Both the FMs are in the same system. Both are remote enabled. The second FM updates data in custom table. the first FM which I am importing validates the data and then calls the second FM for update. Do I have to import both FMs?
    Please help me!
    Thanks
    Gopal

  • Unknown error calling a RFC Function Module in BODI

    Hi all,
    I am having an issue identifying the error that my batch job in BODI is giving with regards to a RFC function module call in my query. The value returned by the standard parameter 'AL_RFC_RETCODE' are square characters (              ).
    At the completion of the job, the error message 'RFC CallReceive error <Function ZCT_INDSLS_SLS_TRN_INSERT: Invalid request.. Invalid request.>.' is being output.
    Correct me if I'm wrong but the parameter 'AL_RFC_RETCODE' should return standard values as per the techical manual provided to undertand any errors that might occur during a RFC FM call.
    Can anyone help me on this?
    Best regards,
    Andrew Wong

    Hi Senthil,
    I think you answered your query in your question itself
    The user ID and password need to be maintained in RFC destination in SM59.
    Go to SM59 and then click on test connection..if it does not ask for ID and passwoed that means correct ID and password is maintained in SM59 otherwise maintain it.
    Regards,
    Atish

  • Where should i call the rfc function module? in xi or in r/3

    where should i call the rfc function module?
    for the synch scenario: file < -- >  xi <---> rfc
    i know the type of rfc is tcp/ip; but i'm not sure with the followings,
    and with some trials i can not even see any message via rwb even all the setting
    can be activated without errors.
    where should i create the rfc destination? in r/3 or xi
    where should i call the rfc via abap program? in r/3 or xi
    i guess the calling program should belong to the different server with the rfc itself....
    so confused....
    Thanks for your reply!!
    Jun

    if i create the destination in xi point to r/3, then i call the rfc use the destination in r/3 right ?
    The call doesnt use the destination in R3. XI has the RFC destination which is just used to connect to the R3 system
    but where i need to create the fm via se37? in xi or r/3 ?
    In R3
    Regards,
    Prateek

  • Problem while calling an RFC Function Module in Background

    Hello,
    I have created a RFC function module for reading data from an external DB system. The FM calls an external RFC program (coded in C++ using RFC SDK), which delivers the required data. This external program is maintainged as an TCP RFC Connection in SM59.
    Further I have created a report, that calls the RFC function module to get the data from the external RFC programm.
    My problem is, when I call the report in foreground, everything works OK, the RFC connection works and data can be read from the external program.
    However, when I schedule the report to run in background as a job, the report is stating in the protocoll that there was a problem calling the defined RFC connection (although the connection is working properly at that time).
    More funny is, this particular problem with running in background occurs only in the productive system, in test and development system the report works correctly also while running as a job in background.
    Can you suggest the solution to this problem? Could it be something with authorisations or server settings?
    I will be on holiday for the next 6 weeks, so take your time to answer .
    Regards,
    Dusan.
    Edited by: Julius Bussche on Jan 22, 2009 7:19 PM
    Please read the forum rules about u r g e n t ...

    This is an external RFC server program, not a remote enabled ABAP RFC function module as the others seem to be assuming, right?
    Is it possible that your DEV and QAS systems only have one application server, but the PROD has many and dedicated one(s) for processing low priority background jobs?
    It might be that the target server of your TCP connection is not this BTC instance, and your RFC server is returning the data "locally" - so, into nirvana...
    Just guessing, but might be worth checking.
    Cheers,
    Julius

  • Calling a RFC Function Module

    Hello Guys,
    I have a question regarding calling a RFC function module.
    In BW - BI 7.0 I call a RFC function module:
    (The ABAP program in BW-BI 7.0 is below)
      CALL FUNCTION ''ZTESTFUNCTIONMODULE'  " Function module in ECC
         DESTINATION 'DECCLNT110'  " ECC system
        TABLES
          it_gl_item   = it_gl
          it_errlog_gl = it_errlog_gl.
    The 'ZTESTFUNCTIONMODULE'   is RFC enabled in the ECC system.
    The purpose is we retarct the data from BW to ECC.
    When I run the function module it always asks for the user id and password.
    The SAP logon screen appears and it asks for the user id and password.
    The destination is maintained in the SM59 transaction and also the user is maintained there. I think it should login automatically into remote system and return the tables. is it correct. How to skip the logon screen.
    Do I have to pass the user id and password in the function module. I think it should take the user id from the SM59 destination. Is it correct.
    Please advise. As always thanks for your help guys.

    Hi Senthil,
    I think you answered your query in your question itself
    The user ID and password need to be maintained in RFC destination in SM59.
    Go to SM59 and then click on test connection..if it does not ask for ID and passwoed that means correct ID and password is maintained in SM59 otherwise maintain it.
    Regards,
    Atish

  • Error when call RFC Function module in R/3

    Dear All,
    We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
    we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
    This is the first time we are doing this configuration.
    Could you please let me know what woulbe the reason.

    read the original message
    We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
    I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter

  • Get interface of RFC function modules in a remote system

    Hi,
    my goal is to write a report which checks if DDIC structures in two systems fit together when I use RFC`s.
    I have the destination and the name of the RFC.
    Can somebody tell me if I can get a list of the Importing/Exporting Parameters of this RFC? Maybe even with a typedescribtion?
    Thanks for you help.
    Best regards
    Lars
    Edited by: Lars-Eric Biewald  on May 21, 2008 8:39 AM

    Hello ,
    Thank you for your quick help.
    Here I have 3 ECC 6 system .
    1 Central systen
    2 Slave system
    Data will be updated to 2 slave system using RFC function module .
    We've already the SAP address, Client, User name , Password.. of the remote system
    So here how we will create RFC in SM59 to be used in the RFC call ?
    We will transfer the username, password , client in the RFC function module/..
    Here I do not know how to create RFC connection in SM59 and how to use them in ABAP
    Could you please help me ????
    Thanks

  • Problem in the creation of rfc function module

    hi,
                I am creating one rfc function module comparing to standard non-rfc function module. In that one i have one export parameter with the standard strcture type. but this stcture component contains with strcture type. among all these components four fields are common. but when i am trying to activate function module it is giving message you cannot use internal tables, strings,references, or strctures as components. that function module name is BAL_FILTER_CREATE and that export parameter name is that export parameter name is E_S_LOG_FILTER that associated type is BAL_S_LFIL. how can i solve the problem. pls give me solution as soon as possible.

    hi,
    for rfc fm's u should enable the call by value check box which will appear on that of import and export parameters. tick that one for each parameter in rfc and activate.
    if helpful reward some points.
    with regards,
    Suresh Aluri.

  • RFC Function Module Configuration

    Hi Experts,
                 I have created an RFC function module which pushes data from R/3 system to XI. I need to configure this RFC in SM59. I am having XI server details and R/3 server details. Anyone can help me how to configure this and what kind of connection i have to use. so that data is pushed  to XI system. we are having a bunch of RFC's in our project. we need to create configuration for all the RFCs.
                  and what is Program ID?
                  Please give me the sequence of steps for configuration.my mail id is [email protected]
                  Points will be awarded for all the answers.
    Thanks & Regards,
    Poorna.

    hi poorna,
                  step 1- first go to the transaction sm59 and here you can
                            create a destination for R/3 to R/3 server type 3.
                  step 2- Now give the IP address for the another R/3 system (XI) here
                             and the system no will be 00 (default).
                   step 3- press save. now go to the second tab logon/ security
                               here declared the clind no, language , user name and
                             password.
                   step 4- press save and then check the test connection.
    Do reward if usefull.
    regards,
    vijay

  • Collection problem with RFC function module WSDL.

    Hi.
    I have developed an RFC function module in a SAP system version 4.7 (WAS 620). This FM has 2 table parameters. I have no problem when I see the WSDL in the SAP Web Service Browser.
    Another team is trying to consume this RFC FM as a web service from a Java application but they say they can't see the table parameters as collections.
    Here is the WSDL of the FM, the table parameters are T_MOVIM and T_ERROR:
    <?xml version="1.0" encoding="UTF-8" ?>
    <definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:s0="urn:sap-com:document:sap:rfc:functions" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="urn:sap-com:document:sap:rfc:functions">
         <types>
              <xsd:schema targetNamespace="urn:sap-com:document:sap:rfc:functions">
                   <xsd:element name="ZMMFUSAPTK_0001">
                        <xsd:complexType>
                             <xsd:all>
                                  <xsd:element name="GENIDOC" minOccurs="0">
                                       <xsd:simpleType>
                                            <xsd:restriction base="xsd:string">
                                                 <xsd:maxLength value="1" />
                                            </xsd:restriction>
                                       </xsd:simpleType>
                                  </xsd:element>
                                  <xsd:element name="T_ERROR">
                                       <xsd:complexType>
                                            <xsd:sequence>
                                                 <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0012" />
                                            </xsd:sequence>
                                       </xsd:complexType>
                                  </xsd:element>
                                  <xsd:element name="T_MOVIM">
                                       <xsd:complexType>
                                            <xsd:sequence>
                                                 <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0011" />
                                            </xsd:sequence>
                                       </xsd:complexType>
                                  </xsd:element>
                             </xsd:all>
                        </xsd:complexType>
                   </xsd:element>
                   <xsd:element name="ZMMFUSAPTK_0001.Response">
                        <xsd:complexType>
                             <xsd:all>
                                  <xsd:element name="CODRET">
                                       <xsd:simpleType>
                                            <xsd:restriction base="xsd:string">
                                                 <xsd:maxLength value="1" />
                                            </xsd:restriction>
                                       </xsd:simpleType>
                                  </xsd:element>
                                  <xsd:element name="T_ERROR">
                                       <xsd:complexType>
                                            <xsd:sequence>
                                                 <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0012" />
                                            </xsd:sequence>
                                       </xsd:complexType>
                                  </xsd:element>
                                  <xsd:element name="T_MOVIM">
                                       <xsd:complexType>
                                            <xsd:sequence>
                                                 <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0011" />
                                            </xsd:sequence>
                                       </xsd:complexType>
                                  </xsd:element>
                             </xsd:all>
                        </xsd:complexType>
                   </xsd:element>
                   <xsd:complexType name="ZMMTASAPTK_0011">
                        <xsd:sequence>
                             <xsd:element name="REFERENCIA" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="10" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="FECHACONT" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="8" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="FECHADOC" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="8" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="CODMOV" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="2" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="NROPLAN" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="12" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="NROCOMP" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="10" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="CLASEMOV" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="3" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="CENTRO" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="4" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="ALMACEN" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="4" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="MATERIAL" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="5" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="LOTE" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="10" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="CANTIDAD" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="15" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="MOTIVOMOV" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="4" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="CENTROREC" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="4" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="ALMACENREC" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="4" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="CENTROCTO" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="10" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="ORDEN" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="12" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="TIPOSTK" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="1" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="NROPEDIDO" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="10" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="CODCISTERNA" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="50" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                        </xsd:sequence>
                   </xsd:complexType>
                   <xsd:complexType name="ZMMTASAPTK_0012">
                        <xsd:sequence>
                             <xsd:element name="REFERENCIA" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="10" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="CODERR" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="3" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                             <xsd:element name="MSJERR" minOccurs="0">
                                  <xsd:simpleType>
                                       <xsd:restriction base="xsd:string">
                                            <xsd:maxLength value="100" />
                                       </xsd:restriction>
                                  </xsd:simpleType>
                             </xsd:element>
                        </xsd:sequence>
                   </xsd:complexType>
              </xsd:schema>
         </types>
         <message name="ZMMFUSAPTK_0001Input">
              <part name="parameters" element="s0:ZMMFUSAPTK_0001" />
         </message>
         <message name="ZMMFUSAPTK_0001Output">
              <part name="parameters" element="s0:ZMMFUSAPTK_0001.Response" />
         </message>
         <portType name="ZMMFUSAPTK_0001PortType">
              <operation name="ZMMFUSAPTK_0001">
                   <input message="s0:ZMMFUSAPTK_0001Input" />
                   <output message="s0:ZMMFUSAPTK_0001Output" />
              </operation>
         </portType>
         <binding name="ZMMFUSAPTK_0001Binding" type="s0:ZMMFUSAPTK_0001PortType">
              <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
              <operation name="ZMMFUSAPTK_0001">
                   <soap:operation soapAction="http://www.sap.com/ZMMFUSAPTK_0001" />
                   <input>
                        <soap:body use="literal" />
                   </input>
                   <output>
                        <soap:body use="literal" />
                   </output>
              </operation>
         </binding>
         <service name="ZMMFUSAPTK_0001Service">
              <documentation>SAP Service ZMMFUSAPTK_0001 via SOAP</documentation>
              <port name="ZMMFUSAPTK_0001PortType" binding="s0:ZMMFUSAPTK_0001Binding">
                   <soap:address location="http://dbades00.bue.bemberg.com.ar:8002/sap/bc/soap/rfc" />
              </port>
         </service>
    </definitions>
    Should I change something in the definition of the parameters of the FM? or the problem is with the parsing process on the other system?
    Thanks in advance.
    Fabian.

    Welcome to SDN.
    I am not sure about this particular issue, but i have used WSDL from WAS6.20 system in MS Office infopath to consume webservice where we have had table parameters without any issue.
    may be try with office infopath to make sure that the problem is with the WSDL or with the java application.
    Regards
    Raja

  • RFC function module exporting

    Hi..
    when I am trying to export some paramters and tables in RFC function module, i m getting error as well as a warning message stating performance will reduce.
    So please help me to solve the issue.
    Thanks
    Vimalraj

    You are getting this message because you are exporting tables 'by value'. Since this will cause the complete data in that internal table to be copied into a new memory area this might impact the performance of that function in case the table has a lot of data in it.
    However - for an RFC you can only define parameters to be called by value, hence this is not an error in your case. It just lets you know that the performance will suffer when you have lots of data in your internal table compared to a function that would pass the data by reference - but you don't have that option for an RFC anyway.
    Hope that helps,
    Michael

Maybe you are looking for

  • How can I use flex motion control VI without hardware?

    I would like to try and simulate the motion control of my system before i hook up the motion control card. But when I use the VI in flex motion contro took kit it asks for address or something and gives me an error. Can't I just simulate without hard

  • Podcasts library in version 7.0

    7.0 is crap for podcasts. You haven't a library listing all your podcasts, like for example you have for your music. I have one and a half thousand podcasts and it's **** to organise them. I've got around it by making a smart playlist but why should

  • Setting specific timeline for user login in EBS

    Hi All, Is it Possible to define specific timelines for specific users or user groups in EBS? (e.g. Mr X can only log in between 08 00 hrs and 16 00 hrs and session is automatically terminated with a grace period afterwards). Thanks, Prasad

  • Photoshop CS3 started to crash on me ?

    Hello. I'm trying to figure out why my Photoshop CS3 and sometimes Bridge CS3 started to crash on me lately. I did install a new ATI Radeon HD3870 card and new ram but it dosent look like thats the reason. I say that because we have a second Mac Pro

  • Safari missing on ipad

    safari browser and itunes icon completely missing from ipad after update