Connection difficulties with 5300 AGN and AccessConnection

Hello,
I'm having some network difficulties on the new X301.
The laptop has Intel 5300 AGN and AccessConnection v5.
1. When I come back to office, it doesn't connect to the AP (DIR-635) automatically, even it has been connected, and saved for profile.
2. After I connect it manually, and after a certain period, the connection seems to be stopped, all network connections got frozen, and a new icon in the notification are shows the 5300 had been disconnected. The driver is 12.12.0.0.75.
Do you have any idea?

Hi
Yeah, the detailed information about the notebook could be very useful.
But the driver update is a good idea for the first.
You can also check the settings in the properties of this card in the device manger.
There should be some interesting options which could be changed.

Similar Messages

Connection difficulties with Lumia 800 and CK 100

I have a Nokia Lumia 800 and an installed CK-100 car kit, the kit has been professionally installed and works as it should do ie it is switched on with the car ignition and can be paired with both my Lumia and my partners Samsung via bluetooth.
The problem I am having is the car kit keeps connecting with the phone resulting in two beeps through the speakers as it confirms it has connected both the phone and player function. This repeats every 1 minute and is very frustrating. It does this almost non stop although some times after about 10 -15 connects it suddenly disconnects.
I have found a way to stop this happening, but it is not ideal and certainly not how a hands free kit should be, as follows;
Set the Lock function to its max setting (5 minutes) and tile to the Bluetooth screen, then by constantly touching the screen every 5 mins to keep the Bluetooth settings screen open it works.
I have sent two emails to the Nokia help centre (both times it is clear that they do not understand the questions) and have phoned the help desk twice, on one of the occasions the help desk person told me to reset the phone (which clears all your setting, Apps etc) and it worked fine for 4 days then started as above.
Anybody got any ideas? to me it looks like the bluetooth setting is doing something when it is in sleep mode.
Regards
martyn

Check whether you may have use your Lumia 800 on another PC initially so it has it's primary sync relationship with that PC.
When you connect your Lumia with your PC and Zune starts select 'phone' and verify the sync relationship which is shown below the phone image. If this says 'guest' you will have to click 'Change Sync Relationship' to move it to the PC you are using.
On any other PC you can remove the phone from the list of know devices through Settings>phone>sync options and click 'forget this phone for each phone you wish to remove. If multiple phone are known to this install of Zune you will see left and right arrows besides the phone image with which you can select the phone to change settings for.
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?

Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
All worked OK with ISO 6.

Hello CraigNicholson
You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
Regards,
-Norm G.

I am Unable to connect iphone with Wi Fi and iTunes

I am Unable to connect iphone with Wi Fi and iTunes is ther any alternative for the same.

Dr.sudin wrote:
I wish to restore the earlier version of the iOS
You cannot.
If you are having issues with yoru SIM, contact your data carrier or the Apple store.

I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

It needs the user password for the wireless router, that would have been set by whomever installed the router, if that was you then try to find the password. If you can not find the password reset the router to factory default and set it up again.

Connect problem with db link and scheduler_jobs on 10.2.0.4.0

hello guys
i have got this problem, i hope someone can help me to understand and solve it.
I have a pl/sql procedure where is referenced a table on a db_link. I own all the grants needed, and if i recall it in an anonymous block, it seems to work.
i.e
create or replace procedure routine_1 is
v_app varchar2(1);
begin
select 'x'
into v_app
from other_user.some_table@my_db_link
where rownum<2;
end routine_1;
Instead, while recalling it from a job scheduled with dba_scheduler package, with the same user, while opening the cursor where the db link table is referenced, i got a connect error:
ORA-01017: invalid username/password; logon denied
ORA-02063: preceding line from xxxxxx (where xxxxxx is the db link)
i would like to understand where i am mistaking. I already checked the user for the connection in the scheduled job and is the same of the anonymous block call.
thanks in advance
Claudio

hello dracis
thanks for the new answer.
i have not access to metalink. Anyway, oracle version is 10g not 11.
Anyway, about dbms_job package (Scheduler is the newer version of dbms_job), i found a phrase on a site saying this:
"Jobs that reference database links will fail if the database link is not fully qualified with the username and password. This is another subtle consequence of the execution environment of jobs."
Probably the cause is that the db link, to work, must be owned by the same user that owns the procedure where is referenced. In this way we hope ownername and password are in some way accessible.
We are trying to check this solution, but we have to wait for some grants.
Claudio

Wireless connectivity issues with Macbook Pro and At&t service HELP!!!!!

I have three Computers two PC's and one Macbook Pro( the latest model).My desktop PC is used by ethernet, my girls laptop is used wirelessly and finally my MBP was being used wirelessly.
I started off with only the two PCs and my internet connection never had a problem and I was doing everything from: on the internet to downloading.
Before I bought my MBP I had also switched from internet and phone bundle to just internet from At&t service. So when I got my first MBP I notice that I was loosing wireless connection with both my girls pc laptop and my MBP so i thought it was because I had just switched service, though they send out a service technician and we came to a conclusion that it was the MBP. (I was loosing signal via wireless and ethernet). So we tried to see if both my girls laptop(wireless) and my PC desktop (ethernet) would run into the same issue which it did not.(MBP was turned off)
So I decided to go my nearest Apple store and let them know what was going on. So I told them what was going on and they said It must be the airport card, and they ended up changing it. When I get home I discover that not only I am having the same issue but other issues too. I went back they ran some diagnostic and they said it was defective and they gave me a new one few days later.
So in the mean time that I waited for my new one to arrive I used my PC desktop and my girl kept using her laptop and guess what no issue what so ever for one whole week. Now I receive my new MBP(they bumped the specs a little), went home set it up and still the same issue though I dont have the issue when Im using via ethernet. Just a view minutes ago I tried removing the ethernet and using the airport/wireless and within a few minutes I lost the signal.
I have the gateway 2WIRE model(2701HG-B) modem/router.
Is there something wrong? what do I have to do to make this work?

Hi Guys, I bough my Mac almost two years ago. All this time I have experienced the same issue. There are tons of discussions re this issue in the internet. Unfortunately, Apple has done nothing to fix it. I have tried a lot of different options, but they work no longer then 1-2 days. The official fix - does not exist so far. It is quit strange, isn't? I can share my experience: if you go to AirPort Utility - Manual Setup - Wireless and then change Channel, it could help you till the moment you restart your computer; next time you need to repeat it again. It takes 2 minutes. Not sure that it would work for you but you could give it a try. Well, not the best option. Anyway Apple must fix it asap! Hello Apple, do you hear us? Good luck.

Anyone noted Bluetooth connection issues with iPhone 4s and Ford sync?

My wifes iPhone 4 with IOS 5.0.1 auto connects to Ford Sync at least 75% of the time on first attempt. My new iPhone 4S with IOS 5.0.1 takes 4-5 attempts and rarely if ever connects without multiple attempts. Any one else seeing issues with failed Bluetooth connections with iPhone 4S phones?

Look at the right panel for links to other threads concerning problems with Fords. And it's not just Fords, cars in general. No solutions seem to be given.

Connectivity issue with iPhone 3GS and Time capsule 7.6.1

I've upgraded the firmware of my Time Capsule. Now i have WiFi connectivity problems with my iPhone 3GS. My iMac and two iPads (version 1 & 2) are doing fine.
Very strange in this situation is when I at a rare moments are able to connect my iphone to the wifi my iPad2 connection falls out. But after a minute or 2 the system disconnects my iphone and reconnect my ipad.
For info: I'm using an iMac 27" 3.4 Intel Core i7 with Mac OS 10.7.3 - all software is updated.
Thanks for reaction
Stephan

The iphone is very sensitive to channel selection..
Open the airport utility manual settings.. Go to the wireless.. change its name to something simple without spaces.. TC24 would do nicely.
Set the wireless to b/g a/n so it works with everything .. not auto.
And set the channels manually.. 2.4ghz (which iphone uses) set channel to either 1, 6, 11.. these are the only channels that do not overlap..
Try and see if the iphone connects..
Set security.. WPA2 personal and put in a suitable key.. pure alphanumeric no spaces.

Error when enabling the connection group with office 2013 and a plugIn

Hi,
I've created the office 2013 proplusVolume with ODT, published it globaly, Sequenced the plugin, with only the office 2013 as a published app-v package on the system, made the connection group with correct xml, but when I enable the connection group, I got
the error:
The connection group {xxx} version {xxx} could not be published because the
virtual COM settings of the individual packages conflict.
Verify that the virtual COM settings are the same for all member packages and try again.
The COM settings are made the same as the office package on the plugin package, but I still have the same error.
The Deployment-, and user-XML have this values (as it was for the office originally):
<COM Mode=”Integrated”>
<IntegratedCOMAttributes
OutOfProcessEnabled=”true” InProcessEnabled=”true” />
<Objects Enabled=”false” />
Why do I get this error?
Why is it merly impossible to track down the realy error?
What can i do to make this connection group work?

Right now the catalog is pulling from the AppXManifests inside the AppV Packages. You can see these settings by renaming the AppV file to .ZIP and browsing those files (READ ONLY) to see the default COM settings. Simply changing the Deployment Config files
is not enough. You will need to make sure the information is dynamically applied at publishing by specifying the -DynamicDeploymentConfiguration option when adding the package using the Add-AppvClientPackage cmdlet. You do not need to worry about the UserConfig
file.
If you are doing this in band with the management system, you would import this configuration in under Advanced Configuration for the package.
Steve Thomas, Senior Consultant, Microsoft
App-V/MED-V/SCVMM/Server App-V/MDOP/AppCompat
http://blogs.technet.com/gladiatormsft/
The App-V Team blog: http://blogs.technet.com/appv/
The MED-V Team Blog: http://blogs.technet.com/medv
The SCVMM Team blog: http://blogs.technet.com/scvmm/
“This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.”

Connecting iMac with 10.5 and mac-mini in ethernet network

Just bought an older Mac Mini for in the house stuff (our office is next to the house). Had to forego wireless because of distance and walls.
So, we are connected with ethernet cable, and a Linksys router in the house that connects to the modem/router in the office.
I have configured and configured and I cannot get the two macs to let me do anything except see each other. They do see each other, but that is all. When I try to connect I get nothing or I get "The server may not exist or it is not operational at this time. Check the server name or IP address and try again."
The IP on both units when I look at the network IP address is 192.168.x.xx - but after they differ.
The mac mini uses 10.4 - while the iMac is on 10.5.

If I set the router - as you said, what do I do to do that?
What exact Brand/Model is it?
Will setting it differently effect that?
It shouldn't, though you'd likely have to power cycle things to have them pick up the new settings.
If I go the second route, am I only changing the subnet mask? I wrote earlier that when I try to configure that, I don't see an option for changing the subnet mask. So, how do I do that?
Yes, just the Subnet Mask, but copy down the IP & Router numbers of each first, because when you click on Using DHCP & choose Manual instead, you have to fill in all 3, put the old IP & Router numbers back in but the new Subnet Mask.
If anything goes wrong, just change back to Using DHCP & renew the lease.

Difficulties with movie clips and frames

This is really irking me.
I am extremely new to Flash so please bear with me. I am assuming that this is a simple, easy to fix problem that I am having. I have Adobe Flash Professional CS5.5.
What I am trying to do is display a sequence of images after other movie clips stop playing.
The image sequence itself does what it is supposed to and works properly, and the other movie clips also are successful. However, whenever I try to put the movie clips for the images in frames or keyframes, the beginning movie clips only play part of the way before the images show up. This happens even though the images' movie clips are on frames/keyframes (I've tried both) after the other movie clips.
The movie clips that are supposed to play first are each on a separate layer and there are two of them.
The first layer is called "tree" and the second is called "text"
The tree layer has a 45-frame gif animation that I have turned into a movie clip. I have created a motion tween and changed its alpha so that the gif has a fading in and out effect. I also have it so that it stops replaying once it reaches the last frame. I am using stop(); for this.
The text layer has a 40-frame gif animation that I have also turned into a gif. This gif is also a movie clip and also has motion tween. Its alpha has also been changed.
Both tree and text play together successfully and how I want them to.
The sequence of images is three separate images, each a different layer, that fade into eachother. These images are pngs, therefore they aren't gifs nor do they have their own frames.
The bottom layer is called floor1 and has frames 1 through 50 of motion tween and alpha adjustments fading the png image. The image is a movie clip.
The layer on top is called floor2 and has frames 51-100 of a different png image fading.
The very top layer is called floor3 and has frames 101-150 of yet another png fading.
The images are successful in doing what they are supposed to.
Layers tree and text are one fla file, and layers floor1, floor2, and floor3 are a separate fla file.
When I copy the frames from layers floor1, floor2, and floor3 into a keyframe after layers text and tree, they transfer properly, but when I test the animation, the image sequence shows up a lot sooner than it is supposed to, interrupting the movie clips on the layers text and tree. I have tried moving the floor# layers' keyframes farther down the timeline, but then the other movie clips just stop.
In the fla file with layers text and tree, I've imported the gifs into the library and then put them onto the stage.
In the fla file with the floor# layers, I've imported the pngs into the stage.
Here's what the text and tree layers look like:
Here's what the floor# layers look like:
The rest of the frames for the floor#s...
So, I thought that the problem was that I needed to delay the image squence. I looked around and found no code or anything for that..
Afterwards, I thought that it was because I had imported the tree and text gifs to the library before putting them on the stage.
I opened a new fla and imported the "tree" gif straight to the stage.
I figured that this should work because then it would show each of the individual frames in the movie clips, which it doesn't do in the above pictures. By importing the gif like this, it does show the individual frames. I've tested this with the image sequence and it works fine. But I have a problem with this method too..
I select all of the frames for the gif to convert into a symbol, so I can add a motion tween and mess with the alpha. However, only the last frame is converted into a movie clip. Well actually no... Only the circled frames below are turned into the movie clip. Even when all of the frames are selected. This isn't very helpful because then I can't change the alpha for the entire gif nor can I create a motion tween without getting a message saying that the motion tween could not be applied to all of the frames.
Here's what this version of "tree" looks like.
And the frames continue like so until 135.
The frames that are turned into the movie clip are circled below.
If I can solve the issue that I'm having with the tree shown in the two pictures above this sentence, then I can display the movie clips and image sequence without a problem. It wouldn't be quite how I had intended it to be, but it would be successful and would still work.
If I can fix the problem with the image sequence showing up to early, and of the tree and text movie clips being cut off, then this project would also be successful and it would be how I had wanted it to be.
If you need clarification, let me know and I'll explain something better.
I am not willing to provide a download link in this forum for my fla files, but I can email them to you if you would like a look. I just don't want someone to be able to find them and take them by doing a google search.
I have uploaded two swfs though.
The first is of the tree and text layers/movie clips working as they are supposed to. The second is of the image sequence (floor1, floor2, floor3) doing what it is supposed to.
Text and tree: http://glassoliverdesigns.weebly.com/uploads/1/0/6/5/10653451/tfg1.swf
Floor1, floor2, floor3: http://glassoliverdesigns.weebly.com/uploads/1/0/6/5/10653451/tfg2.swf
Notice how at the end of the text and tree swf, when the text stops the thing in the background keeps flashing. If that can keep flashing WHILE the images appear, then that would be great.
TL;DR: I want the floor# flash to show up after the text and tree flash but I keep having problems and nothing I try is working properly.

Very concise question, appreciate the screenshots. One thing that motion tweens don't always show very well is keyframes. Let me clear a few things up and see if it helps.
Go back to what you wanted to do originally, which is copying the frames from one document to another. This is perfectly fine and to clear it up, it will also copy any library elements (images, clips, etc) that are required to copy those frames for you, so you do not need to import them yourself.
To successfully copy frames (not symbols), select the first frame of the frames you want to copy, hold shift and select the last frame (alternatively double clicking anywhere in the blue motion tween should select it all as well). Now right-click and "Copy Frames". Now go into your new document, select a frame, right-click and select Paste Frames. You will see the same frames copied over, the blue representing the tween and keyframes came with it and you finally will notice all your images/etc were copied into your library.
Now is a good time to manage the library clutter that was just copied in, if you're a clean freak like me.
This process is the same, as you tried, for the other documents you want to copy in. If any resources match in name then Flash will ask you if you want to "overwrite" that library item. If you do that, you will break one of your previous animations. Make sure that's not the case.
The common gotcha here is not knowing how to slide frames over properly. If overwriting isn't the issue, this is what I suspect your problem is and as you expand/contract the timeline the keyframes aren't going with you.
For example if I import 2 clips with fade in/out and move keyframes as you did I'll get something like this:
Now moving them over I would be very careful to select all of the frames I want to move via the methods above. Click the first frame, hold shift and select the last frame, or double-click anywhere in the middle of the blue. The selection of frames:
Now I simply drag my selected frames to the right, notice the keyframes stay as they should (the black dots):
The animation plays as expected.
Lastly I'm not sure if you've ever used the panel but you should really get used to the Motion Editor. This gives you control over easing as well as shows you an in-depth view of the keyframes that exist in a selected motion tween.
At first this panel may look complex but it simply represents the basic properties you can animate. Any more properties you animate can be added in here. I moved the X, Y and Alpha properties of my object. So you can see over the frames 30-60 what I did. You can also adjust basic easing here.
If your animations don't look correct you can select a motion tween, open the motion editor and verify the keyframes look correct. Scrub the timeline and look at the values you're interested in. Alpha for example, for you.
If you don't see any keyframes when you scrub the timeline, you moved your frames over incorrectly and the keyframes probably exist in a different place and therefore it appears incorrect.

Time Capsule Connectivity Problem with Airport Utility and Mavericks

I have a Time Capsule from 2011 which worked perfectly with my IMac and Airport Utility 5.6.1 but since the upgrade to Mavericks, I cannot get it to work with Airport Utility. Any help much appreciated. Thanks.

When you say.....
I cannot get it to work with AirPort Utility....
What does not work? Can you open up AirPort Utility and take us through the steps? What happens after each step?

Unity Connection Integration with CS 1000 and Meridian 81 - PIMG

I have a customer who have (2) Nortel Meridian 81 and (1) CS1000 for their 3 locations along with Octal 350 servicing 2500 voicemail users today. Customer also has a Cisco UCM in their network today which is servicing their wireless phone users.
UCM and CS1000 are networked together using Q.Sig trunks today. Customer is looking at replacing their Octal solution with a new Voice mail solution.
I was looking at integration documents for Unity Connection using PIMG.
In this scenario, would I need 3 separate PIMG 's at the three remote sites and integrate it with Unity connection or Can I achieve this using just one PIMG at one of the sites, considering the three sites are trunked together using tie-trunks.
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/7x/integration/pimg/guide/cucintpimg090.html#wp1051831
Appreciate any pointers/ help.

Hi there,
Just to add a note to the great tips from Hailey (+5 Hailey!)
We are in the final stages of replacing our "old" Octel with Unity Connection, part of
which is integrated to our CS1000 and CUCM in a "Hybrid" deployment like yours
Centralized Voice Messaging
Cisco Unity Connection supports centralized voice messaging through the phone system, which supports
various inter-phone system networking protocols including proprietary protocols such as Avaya DCS,
Nortel MCDN, or Siemens CorNet, and standards-based protocols such as QSIG or DPNSS. Note that
centralized voice messaging is a function of the phone system and its inter-phone system networking,
not voice mail. Connection will support centralized voice messaging as long as the phone system and its
inter-phone system networking are properly configured.
Setting Up a Nortel Meridian 1 Digital PIMG
Integration with Cisco Unity Connection
Attachments:
cucwithnortel.pdf (308.1 K)
Centralized voice messaging provides voice messaging services to all users in a networked phone system environment. Connection can be hosted on a message center PINX and provide voice messaging services to all users in an enterprise assuming the message center PINX and all user PINX phone systems are properly networked.For a centralized voice messaging configuration to exist, a suitable inter-phone system networking protocol must exist to deliver a minimum level of feature support, such as:•Message waiting indication (MWI).•Transfer, which ensures that the correct calling/called party ID is delivered to the voice messaging system.•Divert, which ensures that the correct calling/called party ID is delivered to the voice messaging system.Other features may be required depending on how the voice messaging system is to be used. For example, if it is also serving as an automated attendant, path-replacement is needed as this feature prevents calls from hair-pinning.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/design/guide/7xcucdg050.html#wp1053538
Cheers!
Rob

Connection issues with MacBook Pro and DVI to component video

How do I connect a 2007 macbook pro to a regular tv (non-hd) via the DVI port with component cables? The image is always scrambled. The connections are fine, what do I need to do?

Concerning this comment:
I know that neither the adapter nor the VGA cable have a problem since I connected the computer to my 1080p TV and it worked just fine...
I would like to point out that 1080p has a lower pixel clock than will 1920 x 1200. So it could be the stability problem is only present when the pixel clock is at the high end of the range.
You could return the adapter and try another. A new one might have better margins. Another thing you could try is to use a utility like SwitchResX to lower the pixel clock and see if stability improves.

Connection difficulties with 5300 AGN and AccessConnection

Similar Messages

Maybe you are looking for