Connection dropping. Need help please.
I have tried everything that In have seen in the forum related to this problem. The only thing not done is un-clicking the option to connect to BT Openzone if in range which seems to be in Communication Settings. Is this on my Laptop or within the hub settings. Please help if you can. Thanks, len.
Hi yes you can deselect Openzone from your pc and reset it when you go out however the problem with your hub losing connection needs resolving and I suggest you try the following link Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
once you have posted the information asked for then the community members can help you more
Thank You
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’
Similar Messages
-
IPhone 5 No Service Issue (Connected/Dropped Cellular) Help please :)
Hi Apple Forums!
I have a iPhone 5 (16gb) with Verizon Wireless.
Last week, while at the hair dresser, i was using my iPhone just fine and than boom, no service. I looked outside and noticed it was a little dark and stormy so i assumed weather was messing with my cell service. When the weather cleared up, my phone showed the 5 single bars, but all of them were empty. Not only that, but, my phone went through a cycle of "LTE" "3g" "1X". Confused, i plugged my iDevice into my computer and did a fresh restore. Set the phone up as a new iPhone (mainly because i don't have anything important on my phone). As soon i was on the welcome to my new iPhone screen, i noticed in the top corner it already said no service. At this point i concluded that my SIM card might be going bad. The next morning i drove to Verizon and they told me that it's common for SIM's to go bad after a year of use(purchased the phone in May of 2013). Replacing the SIM card did not seem to help. The phone continuously/randomly had full service than dropped to no service and had the same symptoms as i experienced earlier. After this, i took the next logical step, i set up a repair with apple. I shipped my iPhone out to apple. After testing, apple explained to me that my iPhone passed all of their tests with no problems. I'm sure after hearing this anyone would be excited to get their phone back! After getting the phone out of the box and powering it on, i was thrilled to see signal. Knowing apple said they did not replace the phone or make any modifications, i was still a little skeptical but hoping apple was right. So around 5 minutes of having the phone powered on/ re-installing my apps, the phone's filled bars were empty, about 30 seconds after they dropped empty, the dreaded "No Service" appeared on my notification bar. Before i receive reply's asking to call Verizon and check signal strength in my city, i have two other phone's in my household, one being an iPhone, with Verizon. Both of the other phone's don't have cellular problems. Although my iPhone was said to pass the tests, are i not safe to assume that there is a hardware flaw in my phone? I'm an apple care customer so my hardware issues should be covered. Although apple is not able to replicate my problem, it does not mean that my device is not working. I cannot take the phone to an apple store due to my location. Has anyone had similar problems with the iPhone? I'm currently using an android device as a temporary replacement and it's driving me insane. I don't like the phone but as most of you know, phone's are important in modern day life. Has anyone had similar problems? If so, how did you go about solving it. I really want to use my iPhone again. I belive it is an internal error, maybe the motherboard is going bad? the antenna? i just am a little confused on how the apple tech's did not find the issue. Anyways thanks for the read and future comments:) best of luck to the all of you CheersIf you have already had your phone checked and there is no hardware or software problem, then anything to do with service is a carrier issue and you need to contact your carrier.
Nobody here can help you with this because you need to contact your phone company/carrier instead. -
Failed to connect Error - Need Help, Please
I installed , created the simple "Hello" program and it ran fine on the simulator.
Then, I click the run OTA and now I'm in deep yogurt!
I get the message:
*** Error ***
Failed to connect to device 0!
Reason:
Emulator 0 terminated while waiting for it to register!
BUILD SUCCESSFUL (total time: 4 seconds)
I just want to restore things to what they were before I selected Run OTA. I've been reading for the past 3 hours and haven't found out to restore. I even deleted and re-installed but, still get the same meassge (probably some saved java pref file...). Anyway, HOW TO RESTORE to a virgin setup????
Thanks... I read somewhere I need to reboot - I did and it took care of it.
-
I can listen to my music with samsung soundbar wh 550 but i cannot do that with my mac book air.
I can connect to samsung soundbar with my mac but the connection drops immediately. Please help.
MacBook Air, iOS 10.9.4Contact Samsung for help.
Barry -
my kids enetered the wrong unlock code on my ipod touch too many times and now the screen says IPOD DISABLED connect to itunes. I have tried connecting it to itunes and I cant because the ipod is locked. need help please! any ideas? Thanks, Nick
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Bought a new macbook and want to manually manage music onto my iphone 4s (as it is already full of music from old windows laptop) but when i click 'manually manage' and then 'apply' i get the message saying it will erase everything already on there. Need help please!
Before you sync your iPhone make sure that all the music that was synced to your phonereviously has been copied to your iTunes on the new MacBook Pro. Then when you connect your phone you will be able to either sync all music or select only those playlists that you want on the phone.
-
Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.
Contact iTunes
Contact iTunes -
Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. When I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.
Hello Vaidas Vaidas,
It sounds like you are noticing someone else is accessing your Clash of Clans data by playing the game and you have tried to reset your Apple ID password. If you are following the steps outlined in this article:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
What is preventing you from changing your password? Any error messages or prompts?
Thank you for using Apple Support Communities.
All the best,
Sterling -
i dont know how i got my photos to my ipod touch from my pc and now i wanna delete them but couldn't. so need help. please let me know.
To turn off auto sync - launch iTunes and go to Edit>Preferences>Devices - check the box at the bottom that says - Prevent iPod, iPhones and iPads from syncing automatically. Click OK and then quit iTunes.
Connect your iDevice to your PC.
Launch iTunes,
Click on the device name on the left side of the iTunes Window.
Click on the Photos Tab in the iTunes window on the right.
Untick all of the photos or albums that you want to remove.
Click on Apply in the lower right corner of iTunes
If you untick or uncheck the Sync Photos heading and then click Apply it will remove all of the photos from the device when it syncs. In this screenshot - I have only certain albums and events selected to sync. -
HT4623 cant find software updates on my iphone4 model MC605J.Need help please..
cant find the sofware update on my phone model MC60J
Need help please..What happens when you connect the iPhone to the computer you
usually sync with and use iTunes on that computer to update the
iPhone?
What version of iOS is currently on your iPhone? -
Iphone keeps shutting off by itself...need help please!!!
Just got new 3GS as my previous one broke....had the new one for about 2days and now it keeps shutting off when ever it wants...and the big apple just appears on the screen!! When i reset the phone it will load up for about 1minute then shut off again then the big apple appears again...Need help please!!!!
i tried to reset it while connected with the USB stick into laptop.....now after it went through the whole restore process it says that the SIM is not valid for the phone!!! please need help!!
-
My Ipad is disabled by wrong password and I have tried to reset and restore a few times with no success. Now I-tunes won't even recognize the I-pad in recovery mode. I need help please.
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks
Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed. Your systems has not been modified." I NEED HELP, PLEASE!
I got it figured out myself... yaaaaay for me!
-
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
My iPhone 6 can't find my macbook pro on the airdrop list, although everything is in place, bluetooth, wi fi gets, need help please ?
Dear Niel, thank you but my mac is (MacBook Pro (Retina, 15-inch, Early 2013).
and i can send from it to my iPhone , but not vice versa
Maybe you are looking for
-
New iPad and husband to use old iPad
What is the best way to set up my new iPad Air 2 if my husband will be using my old iPad 2 with different emails, but wants to use some of the apps and music I have already purchased? Should I copy everything from my old iPad to the new iPad or set t
-
How can I work with big iMovie 6 file?
I am trying to make a one 70 minute movie with iMovie 6 but am having great difficulties because the file has reached 78 gig and is now unworkable because it is just too slow to even play. Even cutting it in half does not solve the problem. Each half
-
Restrict authorizations for loads from HR to BW for certain data
Hi, our customer wants protect some data in the HR productive system. This data are defined/restricted by certain personal areas. It is not enough to use reporting authorizations in BW to restrict presentation in queries or use filters in infopackets
-
Why no image thumbnail icons in CS6?
I recently upgraded from CS5 to CS6 and when I save a file, in any format, I get no image icon thumbnail for the saved file. If I save the same file in CS5, I get the thumbnail image icon, but with severe pixelation of the thumbnail image. It used
-
Problem installing Anna on c7 ..help, please
Hello, Today I receive a message from nokia with the new ANNA ... i tried to install it using the nokia ovi suite.... ...first step : backup ...ok... ..but next ...a problem....keep in the middle of the instalation...retry....and finally it returns a