Connection dropping WRT54G on two ISP shaw cable and Telus Adsl

Hi, hope someone could help me fix this problem i have been having for over 5 months now.
Randomly my internet connection on both my wireless and wired computers will drop and i cannot access the internet OR the router setup page (192.etc...) unless i power cycle the modem. when this happens my wired computer reports that it is still connected to my network but the speed has dropped to 1mbps. when directly connected to the modem i have no problems
my router is a wrt54G v8 (just updated the firmware) currently i am using telus as my ISP
I have spent HOURS on the phone with linksys support staff. i have done everything including:
changing the standard IP adress
playing with the MTU size and reducing it to as low as 1200
adjusting the fragmentation threshold\
adjusting the RTS threshould
changing the connection type from automatic (DHCP) to a PPPoE but when trying to connect on the status page the router replies "could not get an IP adress from ISP" even after a full powercycle
the only thing i have tried cloning the mac adress but when i do this Telus's sign up page (enter username and password) appears which leads me to their setup page IE no internet connection. however i could be doing this wrong.
I have read that putting a hub between the router and the modem works
Please does anyone have suggestions or fixes??!!?? linksys is going to replace my router but i would like to try and fix it first.
Message Edited by Skippy423 on 09-02-2007 11:10 PM

hi...you should try putting a hub in between the modem and the router .. it helps sometimes....

Similar Messages

I have bought a Belkin composite cable from the apple store but the picture is black and white? The tv connection does require the red yellow white cables and that is the one I bought

I have bought a Belkin composite cable from the apple store but the picture is black and white? The tv connection does require the red yellow white cables and that is the one I bought? Can any one help

You have the iPhone in your profile, but people's profiles here are often incomplete or very outdated. It's better to be specific. And part of the problem is that I can't find any Belkin composite cables for connecting an iPhone to a TV, either on the Apple Store or the Belkin site. The closest I found is this Belkin video cable, which doesn't specify exactly what kind of connection it is.
For the most relevant assistance, you've got to post in the iPhone forum and specify the cable by providing a link to exactly which cable you're using.

My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver.

My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver. This only occurred on the rented video and on recorded shows on my cable DVR. previews and other content on Apple TV are fine. Any ideas??

Previews and trailers do not contain 5.1 audio.
If you have recently moved your setup, you may have inadvertently changed some of the settings on your receiver. It certainly sounds as though it is unable to play the 5.1 audio from the Apple TV.

Problem Connecting Linksys WRT54G to Arris TM402P/100 Cable Modem

The Problem
Cannot get an internet connection attempting to install a Linksys WRT54G router between an Arris TM402P/100 cable modem and the local network.
Prior Configuration
Previously had DSL, with the Linksys WRT54G wireless router between the DSL modem and the local network, which worked perfectly.
New Configuration
This friend recently changed his broadband from DSL to Comcast cable, and he also has phone and television service over the same connection. The installation tech connected the cable modem directly to a desktop computer and left the Linksys router out.
The direct connection between the cable modem and the computer works fine, but he and his wife each have laptops and would like to us the Linksys router to connect wirelessly.
This is the TCP/IP configuration of the FAMILY workstation connected to Comcast
directly through Arris TM402P/110 cable modem:
Windows IP Configuration
       Host Name . . . . . . . . . . . . : family
       Primary Dns Suffix . . . . . :
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . : No
       WINS Proxy Enabled. . . .. : No
       DNS Suffix Search List. . .. : hsd1.wa.comcast.net.
Ethernet adapter Local Area Connection:
       Connection-specific DNS Suffix . : hsd1.wa.comcast.net.
       Description . . . . . . . ...... . . . : Intel(R) PRO/100 VE Network Connection
       Physical Address. . . . . . . . . : 00-11-11-6F-FB-69
       Dhcp Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       IP Address. . . . . . . . . . . . : 67.185.155.0
       Subnet Mask . . . . . . . . . . . : 255.255.254.0
       Default Gateway . . . . . . . . . : 67.185.154.1
       DHCP Server . . . . . . . . . . . : 68.87.69.10
       DNS Servers . . . . . . . . . . . : 68.87.69.146
                                                    68.87.85.98
       Lease Obtained. . . . . . . . . : Tuesday, January 09, 2007 5:39:26 PM       Lease Expires . . . . . . . . . . : Friday, January 12, 2007 9:58:23 AM
I cannot find a configuration on the Linksys WRT54G that will allow me to connect to the internet through the Arris TM402P/110 modem. Have tried (1) setting the Linksys to use a dynamic WAN address, (2) setting the Linksys to static IP 67.185.155.0 with TCP/IP settings taken from the above configuration, (3) cloning the MAC address of the desktop computer's NIC and trying both (1) and (2) again.
The error message says that the network cable is not connected. Is it possible that the connection between the router and cable modem requires a cross-over cable?
Any suggestions?

on the router's ui... keep the internet type to dhcp....clone the mac address and then do a power cycle...ensure that the modem is completely powered off during the power cycle...if you have a battery back - up , remove the battery...after a minute , put back the battery and then plug in the power cable in the modem...
let me know if this helps you....

My ipad air will not charge when connected to any outlet with its own cable and plug.

I had this Ipad Air since March 2014 and always kept it updated and charged, but since three days ago it does not seems to like its own charging cable and plug that came with it. I tried different outlets and other cords and plugs. I closed and restarted it, but no result. Now it is off because of no battery power. What can it be?

Try the following:
Option 1
1. Settings>Airplane Mode>ON
2. Turn the iPad OFF
3. Leave unit off for about 20 seconds.
4. Turn the iPad back on and it should now show "charging"
5. Turn Aeroplane Mode OFF
Option 2
Reset iPad and when the apple logo shows up, plug in the charger.

MacBook Pro Airport connection drops out

I have a new and really cool MBP.
I have a 2 year old Airport Express connected to a Motorola Cable Modem creating my wireless home net.
I also have a 2 years old iBook G4 with no problem connecting to the airport.
My new MBP has no problem too when is connected to the AC. BUT when I run my MBP from the battery, the connection drops out randomly.
It's annoying and I cannot find any helpfull support or working solution at Apple.com nor at the other similar thread on this forum. I've tried some proposed solutions. But none worked more than some minutes (which mean that actually they didn't work).
I have some questions about all this:
1) Anybody knows if this is a Hardware or a Software issue?
2) Apple officially said anything about this problem?
3) Can I use my purchase warranty in order to demmand a replacement?
4) Is there any official or unofficial solution that really works?
Please, help. I think it's very stupid to have a nice and really expensive laptop without real wireless capability,
Who want a wireless connection if you aren't able to use it when you are not connected to the AC????
If I was running Vista on Dell or HP laptop I would understand. But on a Mac???
COME ON APPLE!!!!!
This is the 2nd BIG problem I am facing with my new MBP since I bought it on July. I am frustrated and tired. First I couldn't use Motion 3 for like a month because of a bad update. Now I realize the wireless capability is crap.
I have the feeling that the older Apple Computers are better... at least they work!

I had the same problem on my MacBook Pro for the last month or so after "updating" to 10.4.10. Yesterday I tried Loki's fix but couldn't connect at all after that. So I did an archive/install of 10.4.9 and it works better than ever before. I get full signal and it is a lot snappier and faster. The problem is likely in the 10.4.10 update, hopefully Apple will get that fixed in 10.4.11

Can connect via wifi but not by ethernet cable?

Hi,
I'm a bit confused here.
I have an airport express which works fine and I just bought an airport extreme.
The airport extreme is connected to the modem by an ethernet cable and the airport express is connected by ethernet cable to the airport extreme.
I am able to connect to the airport express wifi with all the computers but I'm unable to connect any computers to the airport extreme via ethernet cable.
Both airport express and extreme are lit up green and they both appear on the Airport Utility.
The airport extreme setting is set so that it is joining the airport express' network. That's the only way the light shows up green instead of flicking amber.
I've looked at the settings over and over again and am not sure/don't understand why this is? All I know is that I've got the wifi working! The ethernet connection is not workin for both PCs and Mac.
Any help is much appreciated!

The airport extreme is connected to the modem by an ethernet cable
On the WAN plug, right?
and the airport express is connected by ethernet cable to the airport extreme.
Why? You don't need AirPort Express anymore, unless you have signal weakness in your home.
If that is the case, you can use the AirPort Express to extend the range of the new AirPort Extreme WiFi network with WDS (Wireless Distribution System).
http://support.apple.com/kb/HT1515?viewlocale=en_US

My mac won't connect to the internet without a ethernet cable please HELP!!!!

My mac won't connect to the internet without a enthernet cable and when I go to Network Prefrences and go to airport and try to connect that way it dosen't connect and it says: AirPort 2 has the self-assigned IP address 169.254.201.215 and will not be able to connect to the Internet. PLEASE HELP

Try letting the router assign an IP address. In System Preferences, click the assist me button for help.
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About
Also try turning off Bluetooth

I just bought a new ipad 2, but cannot use it as it only shows the itunes logo and a cable. This means it's telling me to connect to itunes. I've done this and performed sync, still no way out. I have been told by friends to "unlock" it. Please how?

I just bought a new ipad 2, but cannot use it as it only shows the itunes logo and a cable. This means it's telling me to connect to itunes. I've done this and performed sync, still no way out. I have been told by friends to "unlock" it. Please how?

Have you already activated the iPad? That is what the screen is telling you to do - connect to the computer with the supplied cable and run iTunes while connected - and iTunes should guide you through the set up process. If you have already set up the iPad and you are still getting thos screen message - restore your iPad. You must be running iTunes 10.5 on your computer as well.
Restore iPad
If you can't restore this way, you will need recovery mode.
Unable to Restore

Airport Express won't see ethernet cable and internet

I have just connected to new ISP. Airport was working perfectly before. I try to connect new modem to airport with ethernet cable and the Airport utility says nothing is connected to the ethernet WAN port and keeps telling me to plug it in but it is...I have hard reset, and rebooted everything... I am at a loss. Do I need to change IP addresses or DNS server addresses? I connect the ethernet direct to my macbook and the internet works perfectly, but I plug the ethernet into the airport and it doesn't see it. Can someone please help me, the ISP's advice is buy a router from them... but I have used airport for many years on different ISP's and they have worked. Does anyone have a suggestion besides rebooting and the paperclip?

Sorry, I am not familar with this product, but maybe some other users who have used the same product can help.
IF you have not yet performed a full Factory Default Reset on the AirPort Express, that might be a good idea, as a Hard Reset will not return the AirPort Express back to factory fresh settings.
To do this....
Power off the AirPort Express for a few minutes
Hold in the reset button first, and keep holding it for an additional 9-10 seconds while you simultaneously plug the Express back in to power
Release the reset button after the hold period and allow a full minute for the Express to restart
It is unusual for the WAN port to fail, but if you continue to see the message about no connection at the WAN port, that is likely what has happened.
If you have an Apple Store in your area, you might want to take the Express to them to let them have a look.

Airplay signal dropping on third party apps on Yosemite and iOS 8

I play music via a streaming service (Spotify) from an iPad Retina, iPhone 5, iPhone 6, iMac and MacBook Pro. All running the latest software, Yosemite and iOS8
From both my iPad and iPhone the connection drops, then I thought I would try and connect via my MacBook. The same happened there, but I read elsewhere if you connect to Airplay via iTunes, then change your Sound Output to your chosen AirPlay device this would make it more stable. I did this, however the problem persisted.
I utilise, 1 x Airport Extreme, 3 x Airport Express', 1 x Apple TV(3rd Gen).
No trouble streaming from the iTunes Library, to Apple TV, and it seems that there is no issue streaming from iTunes, just from Spotify, YouTube etc...
Can anyone help me?

I have a similar issue since the Yosemite upgrade; to connect to an airport express with external speakers I have to first connect iTunes, play something to make sure its connected then connect to the express using sound prefs. If I try to connect directly via sound prefs I either get an unable to connect message or the track appears to play in spotify, but there is no sound though the speakers. Sometimes the two step approach doesn't work either and I have also ended up with iTunes appearing to play but there is no sound through the external speakers.
I don't experience the same problem with apple TV (though I have had stuttering with that). I can also play spotify to the airport express with not trouble from my iPhone. All was working fine pre Yosemite with exactly the same setup.

External monitor loses signal to macbook pro through DVI cable and Mini DisplayPort Adapter

Hello,
So I had my external monitor connected to my MBP with a DVI cable and a Mini DisplayPort Adapter, for a while already. But sometimes, the monitor would lose signal from the laptop and gives me a white noise screen. Now, the monitor can't receive signal at all, even after I got a new Mini Displayport Adapter. When the monitor and the MBP is connected by the cable and the adapter, the monitor would say "no signal" and the MBP screen would flicker (I think it's trying to connect to the monitor, but can't). The new Mini Display Port Adapter also makes the screen flicker, so I'm not sure if it's the problem is at the adapter or the DVI cable. I'm pretty sure it's not the monitor.
What do you think? Have you ever have a screen flickering problem when your MBP is connected to an external monitor?

I have had the same problem. By following your suggestions I got to arrangements. I could not send them off to the side. When I hit the mirro disply key everyting worked. I got it solved by clicking in arrangements and setting displays to mirror display.
I am still have a problem of no sound coming through my tv.
Rolland

Wrt54gs router to internet cable modem connection drop

With the wrt54gs router set at auto dhcp and mostly on default settings, after some time of inactivity the connection between the router and internet cable modem drops out. That is, when there is no activity (no transmission to/from internet) the connection drops and the wireless connections shows "local only." Any suggestions/comments on why this is so? Thanks!

Have you tried to connect the Modem to the computer and checked if you are facing the same problem or not?
On your Router setup page, change the MTU size from AUTO to Manual and change the Size from 1500 to 1350 and click on Save Settings..... Then click on the Wireless tab and below Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Click on the sub tab under Wireless "Advanced Wireless Settings"
Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now see if you can locate your Wireless Network and attempt to connect...

How can I use Balancing, if I connected to two ISP?

Hello,
I have NetWare6sp3 with 3 NIC's and connected to two ISP. I set two default
gateways (One to first ISP, Another to second ISP). But all of trafic goes
via first gateway. Can I use Balancing beetween ISP1 and IPS2?
Maxim Cuznetov

Maxy,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

WRT54GS Wireless Router Connection Drop!!!

Hey everyone, heres my rant. I have called technical support about a dozen or more times this past month for the connection drops from my WRT54GS Wireless Router. I only use 4 devices to go online;A computer running windows xp, my Xbox 360, my PS2 and my PSP. I always have problems with ALL the devices, of which only 2 are connected wireless, the Xbox 360 and the PSP. I have updated the firmware already but the problems persists, anyone have any suggestions? Because I am ready to throw this thing out the window! LOL Any help would really be appreciated because the tech supports can't help. BTW this is my 1st replacement, reason for this is I had the same problem with my original router. Also the connection is fine when I connect directly from the cable modem to my computer or Xbox 360. What do I do??

hi....try a few things here......first off , change the MTU on the router to 1365 as it is the recommended value for the Xbox 360.....
another thing that i would like to know is if u have forwarded the ports required for the xbox , the PSP and the PS2 ? ...
in case u have not , here are the ports that u will have to open on the router under the Port forwarding section..
The PSP and the PS2 use the same ports :-
TCP:- 10070-10080
UDP :- 6000-6999
The Xbox uses :-
TCP :- 3074 & 88 ...
let me know if u need any more information

Connection dropping WRT54G on two ISP shaw cable and Telus Adsl

Similar Messages

Maybe you are looking for