Connection DTT3500 Digital with DDTS-100. Pls Help me.
I want to connect my speakers (DTT3500) with the decorder DDTS-00. How to connect them and how to setup my system to play DTS. Please analyze. The soundcard is Audigy 2 ZS.
Thank you in advance,
Ilias
Unless I am terribly misinformed those speakers uses a digital connection. So there is no way to connect them to the DDTS unless they also accept analogue connections.
Though, please don't take my word for it since there might be some magical converter but I have never heard of such a thing.
Similar Messages
-
Hi,
I recently just got HDTV and connected it to my DDTS-100 (which is connected to the Gigaworks S750). However, all channels which have 5.1 surround sound (confirmed with cable company - doesn't mean they aren't lieing/don't know what they're talking about) make the the DDTS-100 illuminate the Dolby Digital light (as expected), but also the "Stereo" light (making me think I'm only getting a 2.1 signal). The end result is that I only get sound out of the sub, FL and FR. If I use any of the matrix modes I "lose" all the voices (i.e. apparently no centre channel decoded).
I've tried hooking up the Gigaworks S750 directly to my 7.1 soundcard and all speakers work fine. I've also tried every combination of upmixing available on both the DDTS-100 and the Gigaworks S750. I've also tried using Optical and Coaxial sources from the HDTV box. I also have a GameCube which appears to work perfectly fine on the Pro-Logic mode.
Is there something special I need to do with the DDTS-100? Any way of confirming that the signal is in fact 5.1plz reply
-
Anyone using Logitech Z-5500 Digital with DDTS-100?
Topic pretty much says it all.
What are your experiences?It is now on "6 Ch Direct", but there`s still no good sound from the center and rear speakers. Do I need to change the sound blaster, because when I play with its software the sound is always different?
-
Hi i m using 4s and its updated but i cant configure with microsoft exchange for my gmail account. Anytime i tried to configure it the message comes connection to the server failed. Pls help me out.
<Email Edited by Host>Discontinued by Google. Read here:
http://googlesystem.blogspot.com/2012/12/google-sync-discontinued-for-gmail.html -
I am getting an 1015 error while updating Iphone 3G with latest iTunes pls help me to restore iPhone 3G
Try this and see if this helps http://support.apple.com/kb/TS3694#error1015
-
Help connect X-fi Elite Pro with DDTS-100 and Gigaworks s750
Hi,
I purchased a brand new Gigaworks s750 speakers system, DDTS-100 decoder and X-fi Elite Pro. I connected the DDTS-100 and Elite Pro using Optical Fibre output from the audio console of X-fi Elite Pro to the optical digital input of DDTS-100. With the cables supplied with s750, I connected it to the Decoder DDTS-100. The problem is I am not getting any sound from the rear speakers and the front speakers. Only the centre speakers and the side speakers are producing sound. I could hear loud hissing sound and very very low volume of the music from the front speakers and no sound from the rear speakers. I can hear good quality sound from the centre speakers and average quality sound from the side speakers. What could possibly have gone wrong with my setup ? Somebody please help me. Thanx in advance.Hi Richie,
Thanq for your response. But unlike what you have mentioned, ("what may be happining is the soundcard is decoding the signal and then the ddts is trying to decode it with disatrous results"), In my setup the signal is not getting decoded two times, once by Soundcard and once by the DDTS-100. As I have mentioned that I am taking out an Optical Signal from the sound card to the DDTS-100, the signal comming out from the sound card to the DDTS is Encoded signal only. So there doesnt arise a chance that the signal is getting decoded twice. Can you think of any other reason why my setup is not working? Please let me know.
regards,
Rahul M -
Hi. I would really appreciate if someone could help me find a way to solve my problem. I bought a second hand iphone4 from my friend's friend. I fully trust my friend coz she said this iphone is working but it was handed to her lowbat so i get home i recharge it immediately and after charging it, i open and it shows to select language and country and i did select. After this it shows on the screen "Connect to itunes". Then i plug it in to my laptop and connect to itunes. It shows in my itunes " There is a problem with your iphone". Please visit the Service Answer Center to find answers to all your questions etc. To find your nearest Apple Store pls click here. I know i was so stupid to fully trust and paid before i check the phone. Can anybody pls help me with my problem.
It's probably broken. Is there an error number displayed by iTunes?
-
Hi, I have a power Mac G5 with an airport card, MAc OS X 10.5.8, Wireless card is Airport Extreme ( 0x14E4,0x4E ) and I am having a hard time connecting to my regular NETGEAR router. PLS Help,
Thanks,
MishcadolaI spent 2750 $ for my 24" iMac (price for my region)...
And the perfect world of Steve Jobs still close, but never we've been in there! -
Help.. What sound card to go with ddts 100??
HI everyone,?I just bought my samsung lcd tv and i am very anxious to get the ddts-100. But the problem now is: What sound card should i get? Get a Xi-Fi Extreme Music or just a cheaper soundcard will do since the decoding will be done by the decoder. Can anyone advise on this? I hope to spend lesser on the sound card but if it is really needed then i will get good one. Thanks.
Regards,KekinBear in mind the DDTS-100 will only decode Dolby and DTS (and their varieties). That is, it will happily decode the surround from a dvd (assuming your soundcard and software passes it over the digital) but it will only get stereo when gaming or using CMSS for music.
So, the DDTS-100 is a great partner to a standalone dvd player, games console, and whatever else you have hooked up to the tv. It will also play nice when watching dvds on the pc. It has a good upmixer for music and stereo tv too. If thats roughly what you had planned then it will fit that role nicely. Its also more convenient than switching manually over to the pc (with the switcher box) when you want to use it instead of the decoder.
If you were planning to do everything on the pc then it may be a bit pointless as your soundcard and software could do it all instead. Also, i suspect the quality will be better from a decent X-Fi than the DDTS-100 but havent got around to doing a comparison yet. -
Can ne one help me? I got the decoder since last 20 days. Not getting the sound effects the way i wanted it. I m haivng philips 5.1 sonic edge sound card (psc605), and 5.1 inspire 5200 creative speakers and got new ddts-100. When i connect ddts-100 through my sound card i cant see LED of DOLBY and DTS fucntions on. I cant use or go the selection of DTS or DOLBY on decoder, even by pressing the appropriate switch on ddts-100. My motto for decoder is to play mp3 songs and music on PC. i dont want to run DVD or ne external sources with the decoder.. Well i can say.. with or without decoder sound effects stays normal. No change in sound effect. Well i m not sure, but i did analog connection and Coaxial connection with the pc. but still DTS and DOLBY function inactive on decoder. I can access movies , music, cinema modes from decoder selection.. but tat's no meaning to hear with that. I want DTS and DOLBY. Please advice me if there's ne extra cable needed or nething else must needed.. please specify exact thing to get these kind of setting on my decoder.
Ok, I will start from the beginning with the basics:
The DDTS-100 is a decoder. This means, it can only decode a signal and put it through to a speaker system. It is NOT an effect box, a soundcard, anything else than a decoder.
What do you get with the DDTS-100? The main unit, switchbox, cables.
How should you connect everything? You connect the switchbox to the main unit. Then, connect the soundcard's analog outputs to the switchbox. Then the speakers to the switchbox. Then any peripheral components such as DVD player, X-Box or the soundcard's digital out to the main unit.
Now what?
You have two settings on the switchbox. Why? Because as we have said before, most digital out soundcards can only produce 2 types of signals digitally. That is a PCM Stereo signal or an encoded data stream (either DD or DTS). If you play a stereo source such as an mp3 file and send it out as a pcm stereo signal you will only hear it from the left and right front speakers. So if you want to send discrete multi channel audio from your soundcard you have to use the analog output and set the switchbox to PC-mode. This effectively bypasses the DDTS-100 and plays the sounds directly from your soundcard to your speakers. However, if you have a dolby digital signal or a DTS signal coming from the computer, you can set the switchbox to Decoder-mode, the soundcard to SPDIF passthrough and digital out and the DDTS-100 will take the DD or DTS signal and send them to the corresponding speakers + light the DD or DTS on the main unit. Make sure to connect the soundcard with a coaxial cable, an analog output cannot send out encoded data streams. The DDTS-100 will decode the data information and send the sounds out to the correct channels. It will not do anything else. It is not made to do anything else. The best thing when listening to music and games is to do it in PC-mode using the analog outputs of the soundcard. You can, if you really really have to, play it in decoder mode and use either neo:6 or dolby prologic II on the main unit to upmix the stereo source.
AC-3 is not a music format. I doubt you will find any ac-3 encoded music files since mp3 or wma are the most common formats. Your best way of finding AC-3 material is on a DVD.
I think the best thing for you is to find out what the DDTS-100 is meant to do, and what it is not meant to do. -
Creative inspire 6700 with DDTS-100 ??
Hi there,?I have the creative inspire 6700 speaker system connected to my PC (audigy2 audiocard) andit works fine. Then i saw the DDTS-100 decoder on the website and it looks like the thing i need.So, it's possible to connect my 6700 system to the DDTS 100 ?and then i can use a digital in/out to the DDTS system and then it will work ?(i have a dvd player that i want to connect)?Greetz,...
I am sorry but i am new to these forums and i am actually looking for help myself. I have the creative 6. 6700 speaker system and just today dropped and damaged the casing to one of the sattelite speakers. I have searched the internet to see if i can get another speaker or another set. Can you help me. Im in Scotland in the uk but if there is a place i could contact to buy from that you know i would appreciate it. i will see if i can help you soon.
Thanks.
mark. -
Unknown problem with JSP, JavaScript - Pls help
Hi Friends,
I am facing a strange problem. Explained it below. Kindly help me as it is really affecting my work. Thanks in advance.
I am working on building a web application using jsp, servlet, ejb. the IDE used is WSAD 5.1.2.
I have the below :
1 JSP - Input page - for user input entry
2. Java script1 - For all client side validations
Java script2 - For handling the data submission to servlet (as selected by user)
Javascript3 - Header & Menu Bar
3 Servlet - This actually retrieves the values from the hidden parameters, sets them in session and redirects the control back to the jsp.
Logic for one small iteration : Two drop downs are there. On selecting the first drop down the second drop down should be populated and the first drop down should display the user selected value.
1. When the user selects the first drop down onchange() event gets fired which calls a method in the javascript.
2. In the javascript I set the value of a hidden form field to the selected combo index and submit the form to the servlet
3. In the servlet, I retrieve the hidden request parameter (Index),
set the index in session. Do my business logic based on the value of the index. Set the collection (to be displayed) in second drop down in session.
4. Send the response back to the JSP.
5. In the JSP, we have a method which is called during the onload() event of the body
6. This method sets the user selected values in appropriate controls(by taking from session)
Problem faced: I have a javascript which creates the menu bar for my application and this i've included it in my jsp. I dont know whats wrong with this javascript, when it is commented out the page works perfectly fine. Both the user selected value and the collection are loaded exactly as expected. But when it is included the collection is loaded in the second drop down but the selected index of the first drop down is not set - the drop down gets reset to the default value.
Also on body load of my jsp, I call a javascript method which sets the current date in one text field of my form. Even this is not working fine when I include this javascript. I don't see any script error in this javascript in my browser though. Strange but guess something basic :(
I'm sure there is nothing to do with session. I've tried printing the entire flow. The Servlet sets the values correctly in session and they are also correctly available in the JSP page. The JSP also gets loaded with the user selected values but something happens on page load which clears the values to default.
Am also confused in what way javascript is related to this, coz when I remove it things are working fine.
Am really helpless here pls do the needful. any help is appreciated.
Header.js [which includes the menu bar code]
document.write("<!-- COMMON HEADER CODE -->")
document.write(" <table id='mplPageHeader' cellspacing='0' cellpadding='2' border='0'>")
document.write(" <tr> ")
document.write(" <td rowspan='2' bgcolor='#FFFFFF' width='1%'>")
document.write(" <a href='http://www.web.com' target='_top'>")
document.write(" <img src='./images/ford.gif' alt='BLogistics' border='0'>")
document.write(" </a> ")
document.write(" </td>")
document.write(" <td rowspan='2' class='appTitle' title='Mp' width='1%'>MP&L</td>")
document.write(" <td class='appTitle' title='M R'>M R</td>")
document.write(" <td class='pageIdentifier'>"+' '+"</td>");
document.write(" </tr>")
document.write(" <tr>")
document.write(" <td class='pageTitle' nowrap></td>");
document.write(" <td class='dateInfo' nowrap>Thu Jan 22 2004 12:24 PM</td>")
document.write(" </tr>")
document.write(" </table>")
document.write("<!-- Display Menu Items -->")
document.write("<div id='navigationMenu'>")
document.write(" <script type='text/javascript' src='./javascript/MRmenuItem.js'></script>")
document.write(" <script type='text/javascript' src='./javascript/menuScript.js'></script>")
document.write("</div>")-------------------------------------------------------
Menu Bar Code
var AgntUsr=navigator.userAgent.toLowerCase();
var AppVer=navigator.appVersion.toLowerCase();
var DomYes=document.getElementById?1:0,NavYes=AgntUsr.indexOf("mozilla")!=-1&&AgntUsr.indexOf("compatible")==-1?1:0,ExpYes=AgntUsr.indexOf("msie")!=-1?1:0,Opr=AgntUsr.indexOf("opera")!=-1?1:0;
var DomNav=DomYes&&NavYes?1:0,DomExp=DomYes&&ExpYes?1:0;
var Nav4=NavYes&&!DomYes&&document.layers?1:0,Exp4=ExpYes&&!DomYes&&document.all?1:0;
var MacCom=(AppVer.indexOf("mac")!= -1)?1:0,MacExp4=(MacCom&&AppVer.indexOf("msie 4")!= -1)?1:0,Mac4=(MacCom&&(Nav4||Exp4))?1:0;
var Exp5=AppVer.indexOf("msie 5")!= -1?1:0,Fltr=(AppVer.indexOf("msie 6")!= -1||AppVer.indexOf("msie 7")!= -1)?1:0,MacExp5=(MacCom&&Exp5)?1:0,PosStrt=(NavYes||ExpYes)&&!Opr?1:0;
var RmbrNow=null,FLoc,ScLoc,DcLoc,SWinW,SWinH,FWinW,FWinH,SLdAgnWin,FColW,SColW,DColW,RLvl=0,FrstCreat=1,Ldd=0,Crtd=0,IniFlg,AcrssFrms=1,FrstCntnr=null,CurOvr=null,CloseTmr=null,CntrTxt,TxtClose,ImgStr,ShwFlg=0,M_StrtTp=StartTop,M_StrtLft=StartLeft,StaticPos=0,LftXtra=DomNav?LeftPaddng:0,TpXtra=DomNav?TopPaddng:0,FStr="",M_Hide=Nav4?"hide":"hidden",M_Show=Nav4?"show":"visible",Par=MenuUsesFrames?parent:window,Doc=Par.document,Bod=Doc.body,Trigger=NavYes?Par:Bod;
var Ztop=100,InitLdd=0,P_X=DomYes?"px":"";
var OpnTmr=null;
if(PosStrt){if(MacExp4||MacExp5)LdTmr=setInterval("ChckInitLd()",100);
else{if(Trigger.onload)Dummy=Trigger.onload;
if(DomNav)Trigger.addEventListener("load",Go,false);
else Trigger.onload=Go}}
function ChckInitLd(){
InitLdd=(MenuUsesFrames)?(Par.document.readyState=="complete"&&Par.frames[FirstLineFrame].document.readyState=="complete"&&Par.frames[SecLineFrame].document.readyState=="complete")?1:0:(Par.document.readyState=="complete")?1:0;
if(InitLdd){clearInterval(LdTmr);Go()}}
function Dummy(){return}
function CnclSlct(){return false}
function RePos(){
FWinW=ExpYes?FLoc.document.body.clientWidth:FLoc.innerWidth;
FWinH=ExpYes?FLoc.document.body.clientHeight:FLoc.innerHeight;
SWinW=ExpYes?ScLoc.document.body.clientWidth:ScLoc.innerWidth;
SWinH=ExpYes?ScLoc.document.body.clientHeight:ScLoc.innerHeight;
if(MenuCentered.indexOf("justify")!=-1&&FirstLineHorizontal){
ClcJus();
var P=FrstCntnr.FrstMbr,W=Menu1[5],a=BorderBtwnMain?NoOffFirstLineMenus+1:2,i;
FrstCntnr.style.width=NoOffFirstLineMenus*W+a*BorderWidthMain+P_X;
for(i=0;i<NoOffFirstLineMenus;i++){
P.style.width=W-(P.value.indexOf("<")==-1?LftXtra:0)+P_X;
if(P.ai&&!RightToLeft)
P.ai.style.left=BottomUp?W-BorderColor-2+P_X:W-Arrws[4]-2+P_X;
P=P.PrvMbr
StaticPos=-1;
ClcRl();
if(TargetLoc)ClcTrgt();ClcLft();ClcTp();
PosMenu(FrstCntnr,StartTop,StartLeft);
if(RememberStatus)StMnu()}
function NavUnLdd(){Ldd=0;Crtd=0;SetMenu="0"}
function UnLdd(){
NavUnLdd();
if(ExpYes){var M=FrstCntnr?FrstCntnr.FrstMbr:null;
while(M!=null){if(M.CCn){MakeNull(M.CCn);M.CCn=null}
M=M.PrvMbr}}
if(!Nav4){LdTmr=setInterval("ChckLdd()",100)}}
function UnLddTotal(){MakeNull(FrstCntnr);FrstCntnr=RmbrNow=FLoc=ScLoc=DcLoc=SLdAgnWin=CurOvr=CloseTmr=Doc=Bod=Trigger=null}
function MakeNull(P){
var M=P.FrstMbr,Mi;
while(M!=null){Mi=M;
if(M.CCn){MakeNull(M.CCn);M.CCn=null}
M.Cntnr=null;M=M.PrvMbr;Mi.PrvMbr=null;Mi=null}
P.FrstMbr=null}
function ChckLdd(){
if(!ExpYes){if(ScLoc.document.body){clearInterval(LdTmr);Go()}}
else if(ScLoc.document.readyState=="complete"){if(LdTmr)clearInterval(LdTmr);Go()}}
function NavLdd(e){if(e.target!=self)routeEvent(e);if(e.target==ScLoc)Go()}
function ReDoWhole(){if(AppVer.indexOf("4.0")==-1)Doc.location.reload();else if(SWinW!=ScLoc.innerWidth||SWinH!=ScLoc.innerHeight||FWinW!=FLoc.innerWidth||FWinH!=FLoc.innerHeight)Doc.location.reload()}
function Go(){
if(!Ldd&&PosStrt){
BeforeStart();
Crtd=0;Ldd=1;
FLoc=MenuUsesFrames?parent.frames[FirstLineFrame]:window;
ScLoc=MenuUsesFrames?parent.frames[SecLineFrame]:window;
DcLoc=MenuUsesFrames?parent.frames[DocTargetFrame]:window;
if(MenuUsesFrames){
if(!FLoc){FLoc=ScLoc;if(!FLoc){FLoc=ScLoc=DcLoc;if(!FLoc)FLoc=ScLoc=DcLoc=window}}
if(!ScLoc){ScLoc=DcLoc;if(!ScLoc)ScLoc=DcLoc=FLoc}
if(!DcLoc)DcLoc=ScLoc}
if(FLoc==ScLoc)AcrssFrms=0;
if(AcrssFrms)FirstLineHorizontal=MenuFramesVertical?0:1;
FWinW=ExpYes?FLoc.document.body.clientWidth:FLoc.innerWidth;
FWinH=ExpYes?FLoc.document.body.clientHeight:FLoc.innerHeight;
SWinW=ExpYes?ScLoc.document.body.clientWidth:ScLoc.innerWidth;
SWinH=ExpYes?ScLoc.document.body.clientHeight:ScLoc.innerHeight;
FColW=Nav4?FLoc.document:FLoc.document.body;
SColW=Nav4?ScLoc.document:ScLoc.document.body;
DColW=Nav4?DcLoc.document:ScLoc.document.body;
if(TakeOverBgColor){
if(ExpYes&&MacCom)FColW.style.backgroundColor=AcrssFrms?SColW.bgColor:DColW.bgColor;
else FColW.bgColor=AcrssFrms?SColW.bgColor:DColW.bgColor}
if(MenuCentered.indexOf("justify")!=-1&&FirstLineHorizontal)ClcJus();
if(FrstCreat||FLoc==ScLoc)FrstCntnr=CreateMenuStructure("Menu",NoOffFirstLineMenus,null);
else CreateMenuStructureAgain("Menu",NoOffFirstLineMenus);
ClcRl();
if(TargetLoc)ClcTrgt();ClcLft();ClcTp();
PosMenu(FrstCntnr,StartTop,StartLeft);
IniFlg=1;Initiate();Crtd=1;
SLdAgnWin=ExpYes?ScLoc.document.body:ScLoc;SLdAgnWin.onunload=Nav4?NavUnLdd:UnLdd;
if(ExpYes)Trigger.onunload=UnLddTotal;
Trigger.onresize=Nav4?ReDoWhole:RePos;
AfterBuild();
if(RememberStatus)StMnu();
if(Nav4&&FrstCreat){Trigger.captureEvents(Event.LOAD);Trigger.onload=NavLdd}
if(FrstCreat)Dummy();FrstCreat=0;
if(MenuVerticalCentered=="static"&&!AcrssFrms)setInterval("KeepPos()",250) }}
function KeepPos(){
var TS=ExpYes?FLoc.document.body.scrollTop:FLoc.pageYOffset;
if(TS!=StaticPos){var FCSt=Nav4?FrstCntnr:FrstCntnr.style;
FrstCntnr.OrgTop=StartTop+TS;FCSt.top=FrstCntnr.OrgTop+P_X;StaticPos=TS}}
function ClcRl(){
StartTop=M_StrtTp<1&&M_StrtTp>0?M_StrtTp*FWinH:M_StrtTp;
StartLeft=M_StrtLft<1&&M_StrtLft>0?M_StrtLft*FWinW:M_StrtLft}
function ClcJus(){
var a=BorderBtwnMain?NoOffFirstLineMenus+1:2,Sz=Math.round((PartOfWindow*FWinW-a*BorderWidthMain)/NoOffFirstLineMenus),i,j;
for(i=1;i<NoOffFirstLineMenus+1;i++){j=eval("Menu"+i);j[5]=Sz}
StartLeft=0}
function ClcTrgt(){
var TLoc=Nav4?FLoc.document.layers[TargetLoc]:DomYes?FLoc.document.getElementById(TargetLoc):FLoc.document.all[TargetLoc];
if(DomYes){while(TLoc){StartTop+=TLoc.offsetTop;StartLeft+=TLoc.offsetLeft;TLoc=TLoc.offsetParent}}
else{StartTop+=Nav4?TLoc.pageY:TLoc.offsetTop;StartLeft+=Nav4?TLoc.pageX:TLoc.offsetLeft}}
function ClcLft(){
if(MenuCentered.indexOf("left")==-1){
var Sz=FWinW-(!Nav4?parseInt(FrstCntnr.style.width):FrstCntnr.clip.width);
StartLeft+=MenuCentered.indexOf("right")!=-1?Sz:Sz/2;
if(StartLeft<0)StartLeft=0}}
function ClcTp(){
if(MenuVerticalCentered!="top"&&MenuVerticalCentered!="static"){
var Sz=FWinH-(!Nav4?parseInt(FrstCntnr.style.height):FrstCntnr.clip.height);
StartTop+=MenuVerticalCentered=="bottom"?Sz:Sz/2;
if(StartTop<0)StartTop=0}}
function PosMenu(Ct,Tp,Lt){
RLvl++;
var Ti,Li,Hi,Mb=Ct.FrstMbr,CStl=!Nav4?Ct.style:Ct,MStl=!Nav4?Mb.style:Mb,PadL=Mb.value.indexOf("<")==-1?LftXtra:0,PadT=Mb.value.indexOf("<")==-1?TpXtra:0,MWt=!Nav4?parseInt(MStl.width)+PadL:MStl.clip.width,MHt=!Nav4?parseInt(MStl.height)+PadT:MStl.clip.height,CWt=!Nav4?parseInt(CStl.width):CStl.clip.width,CHt=!Nav4?parseInt(CStl.height):CStl.clip.height,CCw,CCh,STp,SLt;
var BRW=RLvl==1?BorderWidthMain:BorderWidthSub,BTWn=RLvl==1?BorderBtwnMain:BorderBtwnSub;
if(RLvl==1&&AcrssFrms)!MenuFramesVertical?Tp=BottomUp?0:FWinH-CHt+(Nav4?MacCom?-2:4:0):Lt=RightToLeft?0:FWinW-CWt+(Nav4?MacCom?-2:4:0);
if(RLvl==2&&AcrssFrms)!MenuFramesVertical?Tp=BottomUp?SWinH-CHt+(Nav4?MacCom?-2:4:0):0:Lt=RightToLeft?SWinW-CWt:0;
if(RLvl==2){Tp+=VerCorrect;Lt+=HorCorrect}
CStl.top=RLvl==1?Tp+P_X:0;Ct.OrgTop=Tp;
CStl.left=RLvl==1?Lt+P_X:0;Ct.OrgLeft=Lt;
if(RLvl==1&&FirstLineHorizontal){Hi=1;Li=CWt-MWt-2*BRW;Ti=0}
else{Hi=Li=0;Ti=CHt-MHt-2*BRW}
while(Mb!=null){
MStl.left=Li+BRW+P_X;
MStl.top=Ti+BRW+P_X;
if(Nav4)Mb.CLyr.moveTo(Li+BRW,Ti+BRW);
if(Mb.CCn){if(RightToLeft)CCw=Nav4?Mb.CCn.clip.width:parseInt(Mb.CCn.style.width);
if(BottomUp)CCh=Nav4?Mb.CCn.clip.height:parseInt(Mb.CCn.style.height);
if(Hi){STp=BottomUp?Ti-CCh:Ti+MHt+2*BRW;SLt=RightToLeft?Li+MWt-CCw:Li}
else{SLt=RightToLeft?Li-CCw+ChildOverlap*MWt+BRW:Li+(1-ChildOverlap)*MWt;
STp=RLvl==1&&AcrssFrms?BottomUp?Ti-CCh+MHt:Ti:BottomUp?Ti-CCh+(1-ChildVerticalOverlap)*MHt+2*BRW:Ti+ChildVerticalOverlap*MHt+BRW}
PosMenu(Mb.CCn,STp,SLt)}
Mb=Mb.PrvMbr;
if(Mb){ MStl=!Nav4?Mb.style:Mb;PadL=Mb.value.indexOf("<")==-1?LftXtra:0;
PadT=Mb.value.indexOf("<")==-1?TpXtra:0;
MWt=!Nav4?parseInt(MStl.width)+PadL:MStl.clip.width;
MHt=!Nav4?parseInt(MStl.height)+PadT:MStl.clip.height;
Hi?Li-=BTWn?(MWt+BRW):(MWt):Ti-=BTWn?(MHt+BRW):MHt}}
status="Ready";RLvl--}
function StMnu(){
if(!Crtd)return;
var i,Pntr=FrstCntnr,Str=ScLoc.SetMenu?ScLoc.SetMenu:"0";
while(Str.indexOf("_")!=-1&&RememberStatus==1){
i=Pntr.NrItms-parseInt(Str.substring(0,Str.indexOf("_")));
Str=Str.slice(Str.indexOf("_")+1);
Pntr=Pntr.FrstMbr;
for(i;i;i--)Pntr=Pntr.PrvMbr;
if(Nav4)Pntr.CLyr.OM();
else Pntr.OM();
Pntr=Pntr.CCn}
i=Pntr.NrItms-parseInt(Str);
Pntr=Pntr.FrstMbr;
for(i;i;i--)Pntr=Pntr.PrvMbr;
if(RmbrNow!=null){SetItem(RmbrNow,0);RmbrNow.Clckd=0}
if(Pntr!=null){SetItem(Pntr,1);Pntr.Clckd=1;
if(RememberStatus==1){if(Nav4)Pntr.CLyr.OM();else Pntr.OM()}}
RmbrNow=Pntr;
ClrAllChlds(FrstCntnr.FrstMbr);
Rmbr(FrstCntnr)}
function Initiate(){
if(IniFlg&&Ldd){Init(FrstCntnr);IniFlg=0;if(RememberStatus)Rmbr(FrstCntnr);if(ShwFlg)AfterCloseAll();ShwFlg=0}}
function Rmbr(CntPtr){
var Mbr=CntPtr.FrstMbr,St;
while(Mbr!=null){
if(Mbr.DoRmbr){
HiliteItem(Mbr);
if(Mbr.CCn&&RememberStatus==1){St=Nav4?Mbr.CCn:Mbr.CCn.style;St.visibility=M_Show;Rmbr(Mbr.CCn)}
break}
else Mbr=Mbr.PrvMbr}}
function Init(CPt){
var Mb=CPt.FrstMbr,MCSt=Nav4?CPt:CPt.style;
RLvl++;MCSt.visibility=RLvl==1?M_Show:M_Hide;CPt.Shw=RLvl==1?1:0;
while(Mb!=null){if(Mb.Hilite)LowItem(Mb);if(Mb.CCn)Init(Mb.CCn);Mb=Mb.PrvMbr}
RLvl--}
function ClrAllChlds(Pt){
var PSt,Pc;
while(Pt){if(Pt.Hilite){Pc=Nav4?Pt.CLyr:Pt;if(Pc!=CurOvr){LowItem(Pt)}
if(Pt.CCn){PSt=Nav4?Pt.CCn:Pt.CCn.style;if(Pc!=CurOvr){PSt.visibility=M_Hide;Pt.CCn.Shw=0}ClrAllChlds(Pt.CCn.FrstMbr)}
break}
Pt=Pt.PrvMbr}}
function SetItem(Pntr,x){while(Pntr!=null){Pntr.DoRmbr=x;Pntr=Nav4?Pntr.CLyr.Ctnr.Cllr:Pntr.Ctnr.Cllr}}
function GoTo(){
var HP=Nav4?this.LLyr:this;
if(HP.Arr[1]){status="";LowItem(HP);IniFlg=1;Initiate();
HP.Arr[1].indexOf("javascript:")!=-1?eval(HP.Arr[1]):DcLoc.location.href=BaseHref+HP.Arr[1]}}
function HiliteItem(P){
if(Nav4){ if(P.ro)P.document.images[P.rid].src=P.ri2;
else{
P.bgColor = HighBgColor;
if(P.value.indexOf("<img")==-1){P.document.write(P.Ovalue);P.document.close()}}}
else{
if(P.ro){var Lc=P.Lvl==1?FLoc:ScLoc;Lc.document.images[P.rid].src=P.ri2}
else{
P.style.backgroundColor=HighBgColor;
P.style.color=FontHighColor;
P.Hilite=1
function LowItem(P){
P.Hilite=0;
if(P.ro){if(Nav4)P.document.images[P.rid].src=P.ri1;
else{var Lc=P.Lvl==1?FLoc:ScLoc;Lc.document.images[P.rid].src=P.ri1}}
else{
if(Nav4){
P.bgColor=LowBgColor;
if(P.value.indexOf("<img")==-1){P.document.write(P.value);P.document.close()}}
else{
P.style.backgroundColor=LowBgColor;
P.style.color=FontLowColor;
function OpenMenu(){
if(!Ldd||!Crtd)return;
if(OpnTmr)clearTimeout(OpnTmr);
var P=Nav4?this.LLyr:this;
if(P.NofChlds&&!P.CCn){
RLvl=this.Lvl;
P.CCn=CreateMenuStructure(P.MN+"_",P.NofChlds,P);
var Ti,Li,Hi;
var MStl=!Nav4?P.style:P;
var PadL=P.value.indexOf("<")==-1?LftXtra:0;
var PadT=P.value.indexOf("<")==-1?TpXtra:0;
var MWt=!Nav4?parseInt(MStl.width)+PadL:MStl.clip.width;
var MHt=!Nav4?parseInt(MStl.height)+PadT:MStl.clip.height;
var CCw,CCh,STp,SLt;
var BRW=RLvl==1?BorderWidthMain:BorderWidthSub;
if(RightToLeft)CCw=Nav4?P.CCn.clip.width:parseInt(P.CCn.style.width);
if(BottomUp)CCh=Nav4?P.CCn.clip.height:parseInt(P.CCn.style.height);
if(RLvl==1&&FirstLineHorizontal){Hi=1;Li=(Nav4?P.left:parseInt(P.style.left))-BRW;Ti=0}
else{Hi=Li=0;Ti=(Nav4?P.top:parseInt(P.style.top))-BRW}
if(Hi){STp=BottomUp?Ti-CCh:Ti+MHt+2*BRW;SLt=RightToLeft?Li+MWt-CCw:Li}
else{SLt=RightToLeft?Li-CCw+ChildOverlap*MWt+BRW:Li+(1-ChildOverlap)*MWt;
STp=RLvl==1&&AcrssFrms?BottomUp?Ti-CCh+MHt:Ti:BottomUp?Ti-CCh+(1-ChildVerticalOverlap)*MHt+2*BRW:Ti+ChildVerticalOverlap*MHt+BRW}
PosMenu(P.CCn,STp,SLt);
RLvl=0}
var CCnt=Nav4?this.LLyr.CCn:this.CCn,HP=Nav4?this.LLyr:this;
CurOvr=this;IniFlg=0;ClrAllChlds(this.Ctnr.FrstMbr);
if(!HP.Hilite)HiliteItem(HP);
if(CCnt!=null&&!CCnt.Shw)RememberStatus?Unfld():OpnTmr=setTimeout("Unfld()",UnfoldDelay);
//alert(HP.value);
status=HP.value;
function Unfld(){
var P=CurOvr;
var TS=ExpYes?ScLoc.document.body.scrollTop:ScLoc.pageYOffset,LS=ExpYes?ScLoc.document.body.scrollLeft:ScLoc.pageXOffset,CCnt=Nav4?P.LLyr.CCn:P.CCn,THt=Nav4?P.clip.height:parseInt(P.style.height),TWt=Nav4?P.clip.width:parseInt(P.style.width),TLt=AcrssFrms&&P.Lvl==1&&!FirstLineHorizontal?0:Nav4?P.Ctnr.left:parseInt(P.Ctnr.style.left),TTp=AcrssFrms&&P.Lvl==1&&FirstLineHorizontal?0:Nav4?P.Ctnr.top:parseInt(P.Ctnr.style.top);
// TS != 0 is only needed if the menu DIVs are positioned relative to the body.
// We've made them positioned relative to div#navigationMenu which causes
// a problem if TS is based on how the body is scrolled. So set TS to zero.
// Note: the code below will adjust the final top offset based on the height of
// the menu bar so the dropdown appears below (and not on top of) the nav bar.
TS = 0;
var CCW=Nav4?P.LLyr.CCn.clip.width:parseInt(P.CCn.style.width),CCH=Nav4?P.LLyr.CCn.clip.height:parseInt(P.CCn.style.height),CCSt=Nav4?P.LLyr.CCn:P.CCn.style,SLt=AcrssFrms&&P.Lvl==1?CCnt.OrgLeft+TLt+LS:CCnt.OrgLeft+TLt,STp=AcrssFrms&&P.Lvl==1?CCnt.OrgTop+TTp+TS:CCnt.OrgTop+TTp;
if(!ShwFlg){ShwFlg=1;BeforeFirstOpen()}
if(MenuWrap){
if(RightToLeft){if(SLt<LS)SLt=P.Lvl==1?LS:SLt+(CCW+(1-2*ChildOverlap)*TWt);if(SLt+CCW>SWinW+LS)SLt=SWinW+LS-CCW}
else{if(SLt+CCW>SWinW+LS)SLt=P.Lvl==1?SWinW+LS-CCW:SLt-(CCW+(1-2*ChildOverlap)*TWt);if(SLt<LS)SLt=LS}
if(BottomUp){if(STp<TS)STp=P.Lvl==1?TS:STp+(CCH-(1-2*ChildVerticalOverlap)*THt);if(STp+CCH>SWinH+TS)STp=SWinH+TS-CCH+(Nav4?4:0)}
else{if(STp+CCH>TS+SWinH)STp=P.Lvl==1?STp=TS+SWinH-CCH:STp-CCH+(1-2*ChildVerticalOverlap)*THt;if(STp<TS)STp=TS}}
CCSt.top=STp+P_X;CCSt.left=SLt+P_X;
if(Fltr&&MenuSlide){P.CCn.filters[0].Apply();P.CCn.filters[0].play()}
CCSt.visibility=M_Show}
function OpenMenuClick(){
if(!Ldd||!Crtd)return;
var HP=Nav4?this.LLyr:this;CurOvr=this;
IniFlg=0;ClrAllChlds(this.Ctnr.FrstMbr);HiliteItem(HP);
function CloseMenu(){
if(!Ldd||!Crtd)return;
status="";
if(this==CurOvr){if(OpnTmr)clearTimeout(OpnTmr);if(CloseTmr)clearTimeout(CloseTmr);IniFlg=1;CloseTmr=setTimeout("Initiate(CurOvr)",DissapearDelay)}}
function CntnrSetUp(W,H,NoOff,WMu,Mc){
var x=BorderColor;
this.FrstMbr=null;this.NrItms=NoOff;this.Cllr=Mc;this.Shw=0;
this.OrgLeft=this.OrgTop=0;
if(Nav4){if(x)this.bgColor=x;this.visibility="hide";this.resizeTo(W,H)}
else{if(x)this.style.backgroundColor=x;this.style.width=W+P_X;this.style.height=H+P_X;
if(!NavYes)this.style.zIndex=RLvl+Ztop;
if(Fltr){FStr="";if(MenuSlide&&RLvl!=1)FStr=MenuSlide;if(MenuShadow)FStr+=MenuShadow;
if(MenuOpacity)FStr+=MenuOpacity;if(FStr!="")this.style.filter=FStr}}}
function MbrSetUp(MbC,PrMmbr,WMu,Wd,Ht,Nofs){
var Lctn=RLvl==1?FLoc:ScLoc,Tfld=this.Arr[0],t,T,L,W,H,S,a;
this.PrvMbr=PrMmbr;this.Lvl=RLvl;this.Ctnr=MbC;this.CCn=null;this.ai=null;this.Hilite=0;this.DoRmbr=0;
this.Clckd=0;this.OM=OpenMenu;this.style.overflow="hidden";
this.MN=WMu;this.NofChlds=Nofs;
this.style.cursor=(this.Arr[1]||(RLvl==1&&UnfoldsOnClick))?ExpYes?"hand":"pointer":"default";this.ro=0;
if(Tfld.indexOf("rollover")!=-1){this.ro=1;this.ri1=Tfld.substring(Tfld.indexOf("?")+1,Tfld.lastIndexOf("?"));
this.ri2=Tfld.substring(Tfld.lastIndexOf("?")+1,Tfld.length);this.rid=WMu+"i";
Tfld="<img src=\""+this.ri1+"\" name=\""+this.rid+"\" width=\""+Wd+"\" height=\""+Ht+"\">"}
this.value=Tfld;
this.style.color=FontLowColor;
this.style.fontFamily=FontFamily;
this.style.fontSize = FontSize + "pt";
this.style.fontWeight="normal";
this.style.fontStyle="normal";
this.style.backgroundColor=LowBgColor;
if (WMu.length > 6)
{ MenuTextCentered = 'left';}
else
{MenuTextCentered = 'center';}
this.style.textAlign=MenuTextCentered;
if(this.Arr[2])this.style.backgroundImage="url(\""+this.Arr[2]+"\")";
if(Tfld.indexOf("<")==-1){this.style.width=Wd-LftXtra+P_X;this.style.height=Ht-TpXtra+P_X;this.style.paddingLeft=LeftPaddng+P_X;this.style.paddingTop=TopPaddng+P_X}
else{this.style.width=Wd+P_X;this.style.height=Ht+P_X}
if(Tfld.indexOf("<")==-1&&DomYes){t=Lctn.document.createTextNode(Tfld);this.appendChild(t)}
else this.innerHTML=Tfld;
if(this.Arr[3]){a=RLvl==1&&FirstLineHorizontal?BottomUp?9:3:RightToLeft?6:0;
if(Arrws[a]!=""){S=Arrws[a];W=Arrws[a+1];H=Arrws[a+2];T=RLvl==1&&FirstLineHorizontal?BottomUp?2:Ht-H-2:(Ht-H)/2;L=RightToLeft?2:Wd-W-2;
if(DomYes){t=Lctn.document.createElement("img");this.appendChild(t);
t.style.position="absolute";t.src=S;t.style.width=W+P_X;t.style.height=H+P_X;t.style.top=T+P_X;t.style.left=L+P_X}
else{Tfld+="<div id=\""+WMu+"_im\" style=\"position:absolute; top:"+T+"; left:"+L+"; width:"+W+"; height:"+H+";visibility:inherit\"><img src=\""+S+"\"></div>";
this.innerHTML=Tfld;t=Lctn.document.all[WMu+"_im"]}
this.ai=t}}
if(ExpYes){this.onselectstart=CnclSlct;this.onmouseover=RLvl==1&&UnfoldsOnClick?OpenMenuClick:OpenMenu;
this.onmouseout=CloseMenu;this.onclick=RLvl==1&&UnfoldsOnClick&&this.Arr[3]?OpenMenu:GoTo}
else{RLvl==1&&UnfoldsOnClick?this.addEventListener("mouseover",OpenMenuClick,false):this.addEventListener("mouseover",OpenMenu,false);
this.addEventListener("mouseout",CloseMenu,false);
RLvl==1&&UnfoldsOnClick&&this.Arr[3]?this.addEventListener("click",OpenMenu,false):this.addEventListener("click",GoTo,false)}}
function NavMbrSetUp(MbC,PrMmbr,WMu,Wd,Ht,Nofs){
var a;
this.value=this.Arr[0];this.ro=0;
if(this.value.indexOf("rollover")!=-1){
this.ro=1;this.ri1=this.value.substring(this.value.indexOf("?")+1,this.value.lastIndexOf("?"));
this.ri2=this.value.substring(this.value.lastIndexOf("?")+1,this.value.length);this.rid=WMu+"i";
this.value="<img src=\""+this.ri1+"\" name=\""+this.rid+"\">"}
CntrTxt="<div align=\""+MenuTextCentered+"\">";
TxtClose="</font>"+ "</div>";
if(LeftPaddng&&this.value.indexOf("<")==-1&&MenuTextCentered=="left")this.value="�\;"+this.value;
this.Ovalue=this.value;
this.value=this.value.fontcolor(FontLowColor);
this.Ovalue=this.Ovalue.fontcolor(FontHighColor);
this.value=CntrTxt+"<font face=\""+FontFamily+"\" point-size=\""+FontSize+"\">"+this.value+TxtClose;
this.Ovalue=CntrTxt+"<font face=\""+FontFamily+"\" point-size=\""+FontSize+"\">"+this.Ovalue+TxtClose;
this.CCn=null;this.PrvMbr=PrMmbr;this.Hilite=0;this.DoRmbr=0;this.Clckd=0;this.visibility="inherit";
this.MN=WMu;this.NofChlds=Nofs;
this.bgColor=LowBgColor;
this.resizeTo(Wd,Ht);
if(!AcrssFrms&&this.Arr[2])this.background.src=this.Arr[2];
this.document.write(this.value);this.document.close();
this.CLyr=new Layer(Wd,MbC);
this.CLyr.Lvl=RLvl;this.CLyr.visibility="inherit";
this.CLyr.onmouseover=RLvl==1&&UnfoldsOnClick?OpenMenuClick:OpenMenu;this.CLyr.onmouseout=CloseMenu;
this.CLyr.captureEvents(Event.MOUSEUP);this.CLyr.onmouseup=RLvl==1&&UnfoldsOnClick&&this.Arr[3]?OpenMenu:GoTo;
this.CLyr.OM=OpenMenu;
this.CLyr.LLyr=this;this.CLyr.resizeTo(Wd,Ht);this.CLyr.Ctnr=MbC;
if(this.Arr[3]){a=RLvl==1&&FirstLineHorizontal?BottomUp?9:3:RightToLeft?6:0;
if(Arrws[a]!=""){this.CLyr.ILyr=new Layer(Arrws[a+1],this.CLyr);this.CLyr.ILyr.visibility="inherit";
this.CLyr.ILyr.top=RLvl==1&&FirstLineHorizontal?BottomUp?2:Ht-Arrws[a+2]-2:(Ht-Arrws[a+2])/2;
this.CLyr.ILyr.left=RightToLeft?2:Wd-Arrws[a+1]-2;this.CLyr.ILyr.width=Arrws[a+1];this.CLyr.ILyr.height=Arrws[a+2];
ImgStr="<img src=\""+Arrws[a]+"\" width=\""+Arrws[a+1]+"\" height=\""+Arrws[a+2]+"\">";
this.CLyr.ILyr.document.write(ImgStr);this.CLyr.ILyr.document.close()}}}
function CreateMenuStructure(MNm,No,Mcllr){
status="Building menu";RLvl++;
var i,NOs,Mbr,W=0,H=0,PMb=null,WMnu=MNm+"1",MWd=eval(WMnu+"[5]"),MHt=eval(WMnu+"[4]"),Lctn=RLvl==1?FLoc:ScLoc;
var BRW=RLvl==1?BorderWidthMain:BorderWidthSub,BTWn=RLvl==1?BorderBtwnMain:BorderBtwnSub;
if(RLvl==1&&FirstLineHorizontal){
for(i=1;i<No+1;i++){WMnu=MNm+eval(i);W=eval(WMnu+"[5]")?W+eval(WMnu+"[5]"):W+MWd}
W=BTWn?W+(No+1)*BRW:W+2*BRW;H=MHt+2*BRW}
else{for(i=1;i<No+1;i++){WMnu=MNm+eval(i);H=eval(WMnu+"[4]")?H+eval(WMnu+"[4]"):H+MHt}
H=BTWn?H+(No+1)*BRW:H+2*BRW;W=MWd+2*BRW}
if(DomYes){var MbC=Lctn.document.createElement("div");MbC.style.position="absolute";MbC.style.visibility="hidden";Lctn.document.getElementById("navigationMenu").appendChild(MbC)}
else{if(Nav4)var MbC=new Layer(W,Lctn);
else{WMnu+="c";Lctn.document.body.insertAdjacentHTML("AfterBegin","<div id=\""+WMnu+"\" style=\"visibility:hidden; position:absolute;\"><\/div>");
var MbC=Lctn.document.all[WMnu]}}
MbC.SetUp=CntnrSetUp;MbC.SetUp(W,H,No,MNm+"1",Mcllr);
if(Exp4){MbC.InnerString="";
for(i=1;i<No+1;i++){WMnu=MNm+eval(i);MbC.InnerString+="<div id=\""+WMnu+"\" style=\"position:absolute;\"><\/div>"}
MbC.innerHTML=MbC.InnerString}
for(i=1;i<No+1;i++){WMnu=MNm+eval(i);NOs=eval(WMnu+"[3]");
W=RLvl==1&&FirstLineHorizontal?eval(WMnu+"[5]")?eval(WMnu+"[5]"):MWd:MWd;
H=RLvl==1&&FirstLineHorizontal?MHt:eval(WMnu+"[4]")?eval(WMnu+"[4]"):MHt;
if(DomYes){Mbr=Lctn.document.createElement("div"); Mbr.style.position="absolute";Mbr.style.visibility="inherit";MbC.appendChild(Mbr)}
else Mbr=Nav4?new Layer(W,MbC):Lctn.document.all[WMnu];
Mbr.Arr=eval(WMnu);
Mbr.SetUp=Nav4?NavMbrSetUp:MbrSetUp;Mbr.SetUp(MbC,PMb,WMnu,W,H,NOs);
if(NOs&&!BuildOnDemand){Mbr.CCn=CreateMenuStructure(WMnu+"_",NOs,Mbr)}
PMb=Mbr}
MbC.FrstMbr=Mbr;
RLvl--;
return(MbC)}
function CreateMenuStructureAgain(MNm,No){
if(!BuildOnDemand){
var i,WMnu,NOs,PMb,Mbr=FrstCntnr.FrstMbr;RLvl++;
for(i=No;i>0;i--){WMnu=MNm+eval(i);NOs=eval(WMnu+"[3]");PMb=Mbr;if(NOs)Mbr.CCn=CreateMenuStructure(WMnu+"_",NOs,Mbr);Mbr=Mbr.PrvMbr}
RLvl--}
else{ var Mbr=FrstCntnr.FrstMbr;
while(Mbr){Mbr.CCn=null;Mbr=Mbr.PrvMbr}}}Hi thanks...As you said I am performing only on onload event..only thing i am confused is if i remove the javacript MRHeader.js everything works fine...am totally confused...pls help
Here is my JSP code for my input page
<%@page import="java.util.*" %>
<%@page import="com.ford.mr.*" %>
<HTML>
<HEAD>
<link href="./css/mplstyle.css" rel="STYLESHEET" type="text/css">
<title>Input Frame</title>
<link type="text/css" rel="STYLESHEET" href="./css/classic.css">
<STYLE>
.vis1 { visibility:visible }
.vis2 { visibility:hidden }
</STYLE>
<%--
MRIFValidation.js contains the java script for the following requirement:
1. Setting the current date in date to compare
2. All input frame client validations.
E.g Plant id should not be empty.
--%>
<script type="text/javascript" src="./javascript/MRIFValidation.js"> </script>
<%--
MRR2HandleDropdown.js is the javascript for the input frame server side actions
It has many functions related to drop down populating and rendering the data
to user from server.
--%>
<script language="javascript" src="./javascript/MRR2HandleDropdown.js"> </script>
<%--
MRheader.js is the javascript which displays the header for our application
plus it has an internal call to MRMenuItem.js and menuscript.js which
builds the menu bar for our application
Issue is here - On commenting the below the previously entered user
inputs are displayed correctly. Else they are not displayed.
--%>
<script language="javascript" src="./javascript/MRheader.js"> </script>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<style type="text/css">
<!--
a:visited {
color: #0000FF;
.style1 {font-weight: bold}
.style2 {color: #FF0000}
body {
background-color: #FFFFFF;
-->
</style>
<%--
Declaring all the JSP variables used in the page
These variables are used for holding the session parameters
and are used while setting the selected values in the screen.
--%>
<%!
// HTTPSession object
HttpSession sess;
// To hold session Variables //
// Selected plant index
String plantIndex;
// Selected supplier index
String supplierIndex;
// Selected part index
String partIndex;
// List of plant codes
Vector plantCodes = new Vector();
// List of supplier codes
Vector supplierCodes = new Vector();
// List of part codes
Vector partCodes = new Vector();
// To hold the part description for the selected part
String partDescription;
// List of release numbers matching the selected plant, supplier & part
Vector releaseNumbers = new Vector();
// Type of release - Weekly / Daily
String releaseType;
// Selected release1 index
String release1Index;
// Selected release2 index
String release2Index;
// Holds the issue date 1 corresponding to release 1 selected
String issueDate1;
// Holds the issue date 2 corresponding to release 2 selected
String issueDate2;
// List of matching release numbers to the entered issue date1 (Might be one or two
// in case if amended release exist)
Vector matchingRelease1Number = new Vector();
// List of matching release numbers to the entered issue date2 (Might be one or two
// in case if amended release exist)
Vector matchingRelease2Number = new Vector();
// Size of matchingRelease1Number collection
int matchingRelease1Size = 0;
// Size of matchingRelease2Number collection
int matchingRelease2Size = 0;
// Boolean flags to hold if amended release exists in the release numbers
// matching the issue dates entered by user.
boolean amendedRelease1Exist;
boolean amendedRelease2Exist;
String pageName = "";
%>
<%--
The below code does the following:
1. Fetches the various values available in session
2. Stores the same in various JSP variables for access within the page
--%>
<%
System.out.println("In input frame page");
sess = request.getSession(true);
if(sess != null) {
System.out.println("Session id in input frame: "+ sess.getId());
plantIndex = (String) sess.getAttribute("selectedPlantIndex");
supplierIndex = (String) sess.getAttribute("selectedSupplierIndex");
partIndex = (String) sess.getAttribute("selectedPartIndex");
//plantCodes = (Vector) sess.getAttribute("plantCodes");
supplierCodes = (Vector) sess.getAttribute("supplierCodes");
partCodes = (Vector) sess.getAttribute("partCodes");
partDescription = (String) sess.getAttribute("partDescription");
releaseNumbers = (Vector) sess.getAttribute("releaseNumbers");
releaseType = (String) sess.getAttribute("releaseType");
release1Index = (String) sess.getAttribute("selectedRelease1Index");
release2Index =(String) sess.getAttribute("selectedRelease2Index");
issueDate1 = (String) sess.getAttribute("issueDate1");
issueDate2 = (String) sess.getAttribute("issueDate2");
matchingRelease1Number = (Vector) sess.getAttribute("correspondingRelease1Number");
matchingRelease2Number = (Vector) sess.getAttribute("correspondingRelease2Number");
System.out.println("Displaying values in session *******************");
Enumeration enum = sess.getAttributeNames();
while(enum.hasMoreElements()) {
String elementName = (String) enum.nextElement();
System.out.println("element:"+ elementName+": Value: "+ sess.getAttribute(elementName));
System.out.println("Plant Index JSP variable:"+ plantIndex);
%>
<%--
This code is used for getting the plant codes from
the DB. Currently it is hardcoded.
--%>
<%
MRR2GetPlantCodes obj = new MRR2GetPlantCodes();
plantCodes = obj.getPlantCodes();
%>
<%--
The below two blocks are used to iterate through matchingRelease1Number & matchingRelease2Number
and checks if it has amended release. If yes, sets a boolean flag.
matchingRelease1Number & matchingRelease2Number are two collections which
contains the release number(s) matching the inputted issue date
--%>
<%
// Code to set boolean flag amendedRelease1Exist
if(matchingRelease1Number != null) {
Iterator relIter = matchingRelease1Number.iterator();
while(relIter.hasNext()) {
if( ((String)relIter.next()).endsWith("A") ) {
amendedRelease1Exist = true;
// Code to set boolean flag amendedRelease2Exist
if(matchingRelease2Number != null) {
Iterator relIter = matchingRelease2Number.iterator();
while(relIter.hasNext()) {
if( ((String)relIter.next()).endsWith("A") ) {
amendedRelease2Exist = true;
%>
<%--
The below script has one method fillDropDown which is used for setting the
values of the various I/P controls to user selected values:
It sets the below selected values:
1. Plant Index, Supplier Index, Part Index, Part description
2. Release Type (Daily / weekly)
3. Release 1 Index, Release 2 Index
4. Issue date1 & Issue date2
--%>
<script language="javascript">
function fillDropDown(field) {
with(field) {
var partD = "<%=partDescription%>"
<% System.out.println("Loading the index values in input frame......");%>
// inputform.country.selectedIndex = inputform.hiddencountry.value
// Loading plant Index, supplier Index, part index and part description to selected values
<% if(plantIndex != null && !plantIndex.equals("")) {%>
inputframe.plant.selectedIndex = "<%=Integer.parseInt(plantIndex)%>"
<% System.out.println("Selected Plant Index after loading:"+plantIndex);} %>
<% if(supplierIndex != null && !supplierIndex.equals("")) { System.out.println("****Supplier Index not equals null..."+Integer.parseInt(supplierIndex)); %>
inputframe.supplier.selectedIndex = "<%=Integer.parseInt(supplierIndex)%>"
<% } %>
<% if(partIndex != null && !partIndex.equals("")) { %>
inputframe.part.selectedIndex = "<%=Integer.parseInt(partIndex)%>"
<% } %>
<% if(partDescription != null && !partDescription.equals("")) { %>
document.getElementById("partDescription").innerHTML = partD
<% } %>
// Making the default release type selection as done by user
<% if(releaseType != null && !"".equals(releaseType)) {
if("daily".equals(releaseType)) {%>
inputframe.release[0].checked = "checked"
<% //isDaily = true;
} else { %>
inputframe.release[1].checked = "checked"
<% //isWeekly = true;
} %>
<%--
The below code is used to fetch the session variable issueDate1
& issueDate2 (based on the release numbers selected)
and sets the same in two text fields.
--%>
<% if(issueDate1 != null && !issueDate1.equals("")) { %>
inputframe.issueDate1.value = "<%=issueDate1%>"
<% } %>
<% if(issueDate2 != null && !issueDate2.equals("")) { %>
inputframe.issueDate2.value = "<%=issueDate2%>"
<% } %>
<%--
Loading release drop down with the value matching with the entered issue date.
Scenario : User enters the issue date and the corresponding release number is
selected in drop down.
Logic 1:
1. Pass the issue date entered by user and get the matching release numbers
from EJB
2. Compare this with the combo collection and get the perfect match.
3. If more than one match is found take the one with amendment by default
4. Else get the matching one
5. Update the selected index of dropdown to this value
--%>
if(inputframe.release1.options.length > 0) {
var matchingCombo1Index = 0
var comboValue
var matchFound = "false"
var size
var amended = false;
var amendedReleaseExist = "<%=amendedRelease1Exist%>";
var firstValue = ""
var secondValue = ""
var amendedValue = ""
var j = 0
<%
if(matchingRelease1Number != null && matchingRelease1Number.size() != 0) {
Iterator iter = matchingRelease1Number.iterator();
matchingRelease1Size = matchingRelease1Number.size(); %>
size = "<%= matchingRelease1Size %>"
//alert("Size of collection to be matched:"+size)
<% while(iter.hasNext()) {
//String matchFound1 = "false";
String relValue = (String)iter.next();%>
//alert("Collection value under iteration:"+ "<%=relValue%>")
amended = "<%=relValue.endsWith("A")%>"
if(amended) {
amendedValue = "<%=relValue%>"
//alert("Collection value under iteration ends with A:"+amended)
var comb = "<%=relValue%>"
j = j + 1
for(var i = 0; i < inputframe.release1.options.length; i++) {
// breaking the for loop when matchingCombo1Index is set greater than 0
/*if(matchFound == true) {
break
comboValue = inputframe.release1.options.value
//alert("Combo value:->"+comboValue)
//alert("rel value in comparison:"+ comb);
if(comboValue == comb) {
if(size == 1) {
matchFound = "true";
if(size == 2) {
if(j == 1)
firstValue = comb
if(j == 2)
secondValue = comb
// The below if block shall be also kept as if((amended||(!amendedReleaseExist)==true)
// The below one perfectly works fine
if(amended || !amendedReleaseExist) {
matchFound = "true";
if(matchFound == "true") {
matchingCombo1Index = i
// alert("Matching combo index set to:"+ matchingCombo1Index)
inputframe.release1.selectedIndex = matchingCombo1Index
if(size == 2)
document.getElementById('errorArea').innerHTML = "There are"
+ " two release numbers for the particular Issue date."
+" Please select either one of the release numbers ("+firstValue+ " or "+secondValue+" )."
+" Default selection in the Release drop down is "+ amendedValue+ "."
matchingCombo1Index = 0;
matchFound = "false";
// Breaking the for loop
break;
<%
sess.removeAttribute("correspondingRelease1Number") ;
}%>
// Setting the selected release 1 index based on the logic done above.
if(matchingCombo1Index == 0) {
<% if(release1Index != null && !release1Index.equals("")) { matchingRelease1Number = null;%>
inputframe.release1.selectedIndex = "<%=Integer.parseInt(release1Index)%>"
<% } %>
<%--
Performing the above logic to select Release2 value
when the user enters issue date2
--%>
if(inputframe.release2.options.length > 0) {
var matchingCombo2Index = 0
var comboValue
var matchFound = "false"
var size
var amended = false;
var amendedReleaseExist = "<%=amendedRelease2Exist%>";
var firstValue = ""
var secondValue = ""
var amendedValue = ""
var j = 0
<%
if(matchingRelease2Number != null && matchingRelease2Number.size() != 0) {
Iterator iter = matchingRelease2Number.iterator();
matchingRelease2Size = matchingRelease2Number.size(); %>
size = "<%= matchingRelease2Size %>"
//alert("Size of collection to be matched:"+size)
<% while(iter.hasNext()) {
String matchFound1 = "false";
String relValue = (String)iter.next();%>
//alert("Collection value under iteration:"+ "<%=relValue%>")
amended = "<%=relValue.endsWith("A")%>"
if(amended) {
amendedValue = "<%=relValue%>"
//alert("Collection value under iteration ends with A:"+amended)
var comb = "<%=relValue%>"
j = j + 1
for(var i = 0; i < inputframe.release2.options.length; i++) {
// breaking the for loop when matchingCombo2Index is set greater than 0
/*if(matchFound == true) {
break
comboValue = inputframe.release2.options[i].value
//alert("Combo value:->"+comboValue)
//alert("rel value in comparison:"+ comb);
if(comboValue == comb) {
if(size == 1) {
matchFound = "true";
if(size == 2) {
if(j == 1)
firstValue = comb
if(j == 2)
secondValue = comb
// The below if block shall be also kept as if((amended||(!amendedReleaseExist)==true)
// The below one perfectly works fine
if(amended || !amendedRelease2Exist) {
matchFound = "true";
if(matchFound == "true") {
matchingCombo2Index = i
// alert("Matching combo index set to:"+ matchingCombo2Index)
inputframe.release2.selectedIndex = matchingCombo2Index
if(size == 2)
document.getElementById('errorArea').innerHTML = "There are"
+ " two release numbers for the particular Issue date."
+" Please select either one of the release numbers ("+firstValue+ " or "+secondValue+" )."
+" Default selection in the Release drop down is "+ amendedValue+ "."
matchingCombo2Index = 0;
matchFound = "false";
// Breaking the for loop
break;
<%
sess.removeAttribute("correspondingRelease2Number") ;
}%>
// Loading the selected release2 value in drop down
if(matchingCombo2Index == 0) {
<% if(release2Index != null && !release2Index.equals("")) { matchingRelease2Number = null;%>
inputframe.release2.selectedIndex = "<%=Integer.parseInt(release2Index)%>"
<% } %>
} // end of WITH
Logic 2: Not used
1. Pass the issue date entered by user and get the matching release numbers
2. Get the release numbers from session.
3. if release type is daily get the daily release numbers else get weekly release numbers
4. Compare the matching release numbers with daily / weekly release numbers collection
5. Find the match and update the selected index of drop down to this value
}// end of function
</script>
</HEAD>
<%-- Calling the two methods onload event of body --%>
<BODY onload="setCurrentDate(this);fillDropDown(this)"> -
Creative inspire 5300 5.1 with DDTS-100
Hello i'musing these set of speakers for 2.6 years and now decide tobuy decoder DDTS-100 but there is a problem ca't connect them and creative labs are saying this decoder is compatible with all speakers from creative !!!
Any information how to connect will be wellcome many thanks
Filipe ValenteJust connect them using your speaker audio cable from the decoder audio outputs jack to the speaker system audio inputs jack. The decoder user guide should also cover some simple guide for connection too which you can refer to.
Jason -
Can I combine DDTS-100 with speaker I-Trigue L3500?
Vvien,
The DDTS-100 speakers are meant for use with 5.1 / 6.1 / 7.1 speakers. If you're connecting from a soundcard, connecting analog speakers would offer no benefits. It is possible though, but you'll only be using one of the connections that is available to go to speakers, but it's set up to output sound for 5.1 speaker (or more).
Cat -
Centre channel problem with DDTS-100
I have a set of Gigaworks s750 speakers connected to my PC, PS3 and Xbox 360 via the DDTS-100 decoder; up until yesterday this was all working fine. Having moved some of the gear around to accomodate my new desk, I plugged everything back in and found that the sound from the front centre channel is muffled and/or quieter than the other channels.
The speakers themselves don't seem to be the problem as the PC (which is connected via the switch box included with the decoder) sounds fine but the problem persists with both the PS3 and X360.
My first thought was that I'd pulled one of the cables loose while rearranging the furniture but I've re-plugged everything in several times since with no joy. I've also tried changing the spdif cables and switching the sockets around, as well as removing the switch box and plugging the speakers directly into the decoder but nothing made any difference.
Has anyone ever encountered anything like this before and/or could offer any suggestions?
Any advice would be much appreceated.I finnaly found out my problem
The buzz came out from my coax cable from my DVD. My DVD player was probably inducing 60Hz on the coax output.
I switched to the optical output and no more buzz.
I'll need to buy a new toslink cable to plug my x-box on the optical input #2
Also I pluged my TV audio out in my st analog input, it also induced a 60 Hz on my DDTS-100. The decoder does not seem to filter out electric noises.
I'm pretty happy to have found out my problem but I'm very dispointed that the DDTS-100 does not filter any electric noises.
Mat
Maybe you are looking for
-
My laptop won't connect to my printer
Hello! My printer was working just fine for the past year, it was connected to my laptop with the wifi. Until yesterday... There seems to be something wrong with the connection, but both my laptop and the printer are on the same wifi. I have tried to
-
Viewing Layouts on Remote/Testing Server
This is a beginner question. I'm trying to view Layouts and/or Content Holders on the Remote/Testing Server out of Dreamweaver so I can edit them independently, but I just get 404 messages. When I create a new page in BC, I am prompted for a Page Tit
-
HP Pavilion dv6-6100 se recovery kit
Please I bought my Laptop from Dubai, and its warranty has expired, I can't order a recovery kit niether from US nor Middle East, The option of the recovery kit or recovery disc is not available in the middle east site, and the product itself is not
-
Hi, If the backround job is failed where can i see the status and how can i run again?
-
BEx Analyzer: How to optimize reporting over a hierarchy?
Hello there, using BEx Analyzer & Excel, we're reporting over a large hierarchy of cost centers, beginning at the top level and then looping over 166 different cost centers in that hierarchy. Looping works from within a macro, calling the SAPBEXSetFi