Connection error after upgrade to 4.1

Hi -
I have upgraded to 4.1 EA2, but when I connect to 12c pluggable database, which was previously working fine with older version, I am getting the following error.
"An error was encountered performing the requested operation: IO Error: Invalid connection string format, a valid format is: "host:port:sid" Vendor code 17002"
Regards,
Omar

Everything is NOT correct, or we'd be able to connect.
>>Do you still have the older version of SQLDev installed - does the connection still work there?
Or, are you able to connect to your 12c PDB with any other client?
By the way, 12c PDB connections require you use SERVICE, not a SID.
It might help if you show us your connection properties.

Similar Messages

Connectivity Error After Upgrading to Yosemite

When trying to scan using HP Utility after upgrading to Mac OS Yosemite, I receive the following error:
An error occurred while communicating with the HP imaging device. Try the following steps. After each step, try scanning again.
- Turn off and then unplug the device, wait 60 seconds, and plug in and turn on the device.
- Make sure that the device’s power cord and cable are properly attached, plugged in, and the device is on.
- Reboot the computer. Uninstall and reinstall the device.
- Reinstall the HP Scan software that came with the device.
- If you continue to receive this error, you may need to request service for your device.
My computer seems to recognize the device on my wireless network but cannot connect to it. I have tried reinstalling the printer and cycling everything (computer, printer, wireless router) off and on, to no avail. I just upgraded the driver software through Software Update this week.
Any suggestions?

Hi MASTERNC, and thanks for getting back to me!
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would then suggest readding the printer to your system by running your Apple updates: OS X: Updating OS X and Mac App Store apps
Good luck and please let me know how it goes!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Printer connection errors after upgrade - help

After upgrading to 10.5 - any of our printers that were already established are now not accessible. They give the message - "Attempting to connect to host RNPB5FAE6.local. on port 9100" after a while - then unable to connect will retry. If I delete the printer and reestablish via appletalk it will work. If I use bonjour I end up back at the same problem. What happened? Why is this happening?
I have hundreds of computers that I would have to manually reset - there has to be a better solution. Why is bonjour not working?

Hi, i've just search for the same problem. I suddenly cannot print, following trying to print at 1.3mb (only) 20 page InDesign doc ...my printer in another country gave up on the same printing. it too giving me at '13% complete' reading. i was in a rush to get a return flight to the UK but v much think that clicking 'hold' > 'resume' that it would have also given me - 'Attempting to connect to host '...' on port 9100'.
I've been to the mac store after much googling and was advise to re-install the driver when i got back (installation time would have taken too long in the store)
I've emailed you on this thread as i really think you may have the secret to recovery but have to say that your reply baffles me as it's soooo techie :(( ..what's 'pinging'?... I've had a mac for ages though and am pretty good at sorting things generally so would you have any great advice, not uber techie to help me / others in the future? I would v much appreciate it!
Ps. I have Leopard by the way.
thanks,
M

ITunes 10.5/iPhone 3Gs Connection Errors after upgrade

I had quite a bit of trouble upgrading iTunes from 10.1x to 10.5. I had to remove ALL Apple products/files/registry entries. After I did this, I ran the installer file (64bit one) directly from the iTunes site. It looked as of everything installed EXCEPT one program installed partially then rolled back the installation of that particular program. The rest of iTunes 10.5 installed with no problems. When I tried to connect my iPhone 3Gs, I received the following error:
I looked in my control panel and noticed Apple Mobile Device Support is missing now. I assume this the the application that was 'rolled back'. I followed the instructions in the error listed above and the exact same thing happens again. Here is a bit of background on what I have:
My Hardware: (Gathered via BelArc Advisor)
Windows 7 Home Premium (x64) Service Pack 1 (build 7601)
Install Language: English (United States)
System Locale: English (United States)
DELL Inc. Studio XPS 435T/9000 00
Processor a
Main Circuit Board b
2.67 gigahertz Intel Core i7 920
32 kilobyte primary memory cache
1024 kilobyte secondary memory cache
8192 kilobyte tertiary memory cache
64-bit ready
Multi-core (4 total)
Hyper-threaded (8 total)
Board: DELL Inc. 0X501H A02
Bus Clock: 133 megahertz
BIOS: DELL INC. A15 07/28/2009
Drives
Memory Modules c,d
HL-DT-ST DVD-ROM DH20N [CD-ROM drive]
MagicISO Virtual DVD-ROM0000 [CD-ROM drive]
Optiarc DVD+-RW AD-7230S [CD-ROM drive]
ST3750528AS [Hard drive] (750.15 GB) -- drive 0, s/n 9VP2F6G3, SMART Status: Healthy
6136 Megabytes Usable Installed Memory
Slot 'DIMM0' has 1024 MB (serial number 475FE085)
Slot 'DIMM1' has 1024 MB (serial number 085FE085)
Slot 'DIMM2' has 1024 MB (serial number 005FE085)
Slot 'DIMM3' has 1024 MB (serial number 045FE085)
Slot 'DIMM4' has 1024 MB (serial number 515EE085)
Slot 'DIMM5' has 1024 MB (serial number 935EE085)
This is what I did so far:
Backup up my iPhone before all this started (2 days ago)
Imaged my drive just in case -ALWAYS have backups
Uninstalled ALL Apple products from my PC via the Windows Control Panel's Add/Remove Programs
Cleaned the Registry of all Apple products that I could regognize
Deleted ALL Apple folders from drive
Checked to see if any Apple service was running (none were left)
Rebooted my PC
Scanned my entire HDD and Registry for all traces of Apple products (none found)
Went to the official iTunes 10.5 site and 'ran' the installed directly from there.
All went well till the one program 'rolled back' once again.
Connected my iPhone and the error listed above remains.
Ran Apple Updater and found that Safari and QuickTime
Installed Safari and QuickTime on a chance that it may help fix or repair something that I may have missed
Cursed/Yelled/Screamed/Cried/Took a chill pill and wrote this plea for help
This may be a bit more info than most want to see, but on the chance the Apple Support personnel actually look at this post, I want them to see the full details. I work in the IT field, so complex answers are ok to post. I am willing to try just about anything at this point. I appreciate any replies and will give more details as requested that involve this issue.
- GT

This is an update to my original post...
I was able to install iTune 10.5 finally, but Apple Mobile Device Support will still not install (update actually). I restored my PC to an earlier state (before I first tried to install 10.5 the first time) and now my older version will not start since my iTunes library has been upgraded to the 10.5 format. I am really stuck here. I really want to get me music back since I have nearly 30 Gbs of music and movies I have burned from CDs. That does not even include my iTunes online purchases that I can easily revover/re-download.
- GT

TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion

Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
My iphoto was working with photostream and now it will not connect at all.
I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
help!

FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

Flash 9,0,124,0 security error after upgrade

I get the following error after upgrading my Flash Player
(after my system prompted me to install it while running the Flash
editor):
Internet Explorer has blocked this site from using an ActiveX
control in an unsafe manner.
I have uninstalled and reinstalled the player from the
browser, about 5 times now and it continues to be a problem for IE.
Works ok in Firefox if I manually download the FF installer. Is
there a standalone installer for Vista/IE7 or am I forced to use
the ActiveX installer which seems to have issues?

Fix: Removed both (!?more than one?!) versions of flash
player in my Programs and Features dialog, then ran
uninstall_flash_player.exe, reset IE7 to factory spec, then
reinstalled Flash from ActiveX. Seems to be working now.

Error after upgrade CRS 4.0.4SR1 to 4.0.5SR2

Hi,
I've got some errors after upgrading my CRS 4.0.4SR1 cluster to 4.0.5SR2.
First my publisher's status stay in "patch" status for near 2 days now. I'm not able to change anything in the configuration, i've got this message "Config Changes are not allowed during 'Patch' operation, which was started by '_ccbu_build' at 'Thu Apr 08 04:31:04 CEST 2010 '. Please try again after 'Patch' is complete."(ERREUR02.jpg). How can I change this status?
Then I've got errors in historical DB which is working but not on the publisher only on subscriber. How can I resynchronize this DB?
Thanks for your help.

Thanks Tammy for the reply
We already tried the suggested SAP Note couple of time without any luck.
Regards,
SJ

Error after upgrading from sap b1 pl 35 to pl 49

hello sap experts
iam getting the following error after upgrading from sap b1 pl 35 to pl 49 this error is coming if we have given round off or discount in the below cell
"Discount deviates from authorised ranges (sales oreder-discount%for document) [message 439-15] pls make it as soon as possible an i will be thankful to those guys .
regards
Jenny

Hello Jenny,
You may check by supreuser account first to see if you got the same error. If not, it probably just related to user authorization. If yes, it must be a bug.
Thanks,
Gordon

What can I do if I get an internal power error after upgrading to Windows 10?

QuestionWhat can I do if I get an internal power error after upgrading to Windows 10?
AnswerSome laptops with AMD graphics that upgraded to Windows 10 are showing blue screens with error messages regarding Internal_Power_Error. If you receive this error, try the procedure in this article.
First, you'll need to quickly set the boot options to Safe Mode:
1. Hold the Windows key and press 'R' to open the run box.
2. Type MSCONFIG, then press ENTER.
3. Select the BOOT tab.
4. Under BOOT OPTIONS, check Safe boot, then select Minimal.
5. Click Apply, then OK.
6. Click Restart. (If prompted, click Restart anyway.)
From Safe Mode disable the AMD Display Driver:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Disable, then click Yes to confirm.
7. Click Close.
8. Hold the Windows key and press the 'R' key to open the run box.
9. Type MSCONFIG, then press ENTER.
10. Select the BOOT tab.
11. Uncheck Safe boot.
12. Click Apply, then OK.
13. Click Restart. (If prompted, click Restart anyway.)
From Windows 10 started with the AMD Display Driver disabled:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Update Driver.
7. Click Search automatically for updated driver software.
8. An AMD driver should be found and installed.
The driver that originally caused this problem is AMD display driver version 15.200.1046.2 dated 7/15/2015.
The driver installed through this process might have an older date, such as 15.200.1055.0 dated 7/6/2015. That's okay.

I'm having the same problem. I got error message 21. I went to apple store. they are saying i have a hardware error. Really, my phone was working before the update. Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child.
Help please,
I will be glad to go back to the older software update

Imac error after upgrade to 10.8.4

I received an error after upgrade tp brand new imac. Error was upgrade was not installed. Upon reboot the version of SW in About thi Mac is 10.8.4. Bug?
iMac i7, 21.5" 16GB memory, fusion drive.
Thanks for input. I assume the upgrade took.

Verify Permissions gave me some errors, I deleted the repeats and the permissions fixed lines:
Repairing permissions for “Macintosh HD”
Warning: SUID file “System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig” has been modified and will not be repaired.
Warning: SUID file “usr/lib/sa/sadc” has been modified and will not be repaired.
Warning: SUID file “usr/bin/quota” has been modified and will not be repaired.
+++ (multiple repairs)
Permissions repair complete
I verfied the HD
Much text (removed)...
The volume Macintosh HD appears to be OK.
I also loaded the Apple downloads version of the upgarde and received the following (again):
The Installation failed
The insatllation encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Message was edited by: Steve51K

Database connecting error after kernel upgrade

Hi Gurus
I am tring to upgrade my system kernel from 144 to 179, the system based on AIX 6.1 and DB2 B9.5.2,
After upgrading kernel SAP is not starting and I found database connection error because which Database is not activated. The startdb command completed successfully. I found I/O error while trying to make db connection.
I am also tring make SAP up by using old kernel (backup) but getting same error for backup kernel also. Now my system is totaly down.
So please help me out if you have any idea for this error in db2 database. The start db logs are as given below.
Wed Jan 21 08:56:07 GMT+05:30 2009
LOGFILE FOR STARTING DB6 (DB2 UDB)
Wed Jan 21 08:56:07 GMT+05:30 2009
checking required environment variables
DB2INSTANCE is >db2d11<
INSTHOME     is >/db2/db2d11<
DB2DBDFT     is >D11<
Wed Jan 21 08:56:07 GMT+05:30 2009
starting database manager
01/21/2009 08:56:07     0   0   SQL1026N The database manager is already active.
SQL1026N The database manager is already active.
Database Manager started
SQL1036C An I/O error occurred while accessing the database. SQLSTATE=58030
Activate database failed
Wed Jan 21 08:56:08 GMT+05:30 2009
R3trans connect to the database
R3trans check finished with return code: 12
R3trans connect failed
Notify your SAP/database administrator
Wed Jan 21 08:56:08 GMT+05:30 2009
/usr/sap/D11/SYS/exe/run/startdb: Terminating with error code 2
Please help me out.
Regards,
Jayesh.

Hi Jayesh,
from your description I would guess that the IO error is not related to the kernel change at all.
Please have a look at db2diag.log for the real cause of the problem.
You should be able to reproduce the error with
db2 activate database <dbname>
Regards
               Frank

WiFi Internet connectivity problems after upgrade to 10.8.4

After upgrading to MacOS 10.8.4 I am facing regular interruptions to my WiFi internet connectivity. Periodically the internet connectivity is lost and the only way to fix the problem is to turn WiFi off and on again. This happens frequently when I am downloading files at using big bandwidth (more than 1.5-2 MB/s). If I use assist me on the Network preferences tab, it displays an ISP error when the connectivity is down, however I am certain that I do nota have any kind of ISP or router issue since at the same time I have WiFi internet connectivity from my iPad mini, iPhone 4S and Samsung Galaxy S3. Therefore it should be a 10.8.4 issue

Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)

SSL Error after upgrading to Windows 8.1

After upgrade my Windows 8 to Windows 8.1, I got this SSL Error when I tried to go to "https://google.com":
http://i.stack.imgur.com/2kaXO.png
...and this in IE: http://i.stack.imgur.com/7Gxbw.png
I have did some research and tried to change my system time up to date, reset my modem and use wireshark to see if anybody is tracking my network, but none of them seem to be the problem.
Anyone can help me? Thanks a lot...
EDIT: I have checked my browsers and just figure out that every connection from my computer is not able to connect to any SSL connection, for example Yahoo Messenger login. I'm thinking my computer SSL Certificate got serious problem, is
there anyway to "reset" it?

Hi,
For the issue, it can happen for a wide variety of reasons.
I suggest we try the following methods to narrow down the issue.
Method 1.
Clear the Secure Sockets Layer (SSL) state:
In Internet Explorer, click Tools, and then click Internet Options.
Click the Content tab, and then click Clear SSL state.
Method 2.
Press Win+X, and then click Command Prompt(Admin).
At the command prompt, type sfc /scannow, and then press ENTER.
Method 3.
Press Win+R, type regedit in the box, and then press ENTER.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl
On the Edit menu, point to New, and then click Key.
Type FEATURE_ERROR_PAGE_BYPASS_ZONE_CHECK_FOR_HTTPS_KB950067 to name the new registry subkey, and then press ENTER.
On the Edit menu, point to New, and then click DWORD Value.
Type iexplore.exe to name the new registry entry, and then press ENTER.
On the Edit menu, click Modify.
Type 1, and then click OK.
Exit Registry Editor.
If the issue persists, I suggest you reinstall the IE to check the result.
Hope these could be helpful.
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

There are some form errors after upgrading ebs from 12.1.1 to 12.1.3

Hello , EBS experts,
I have some upgrading issues need your great help. thanks in advance!
We have installed EBS 12.1.1 on Oracle Linux 5.7, everything is okay.
Now, we need to upgrading EBS from 12.1.1 to 12.1.3, after all the upgrading process were done. We have encountered the form error while opening the AR transaction forms as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
Lots of Receivable forms have the same issue, I have upgrading the ebs from 12.1.1 to 12.1.3 with 2 times, but every time, I have encountered the same issue.
Can anyone have me? it's very urgent for me to finish this task, thanks!
Here is my upgrading process for your reference
1. Installed the EBS 12.1.1 and everything is okay(Create a AR, AP transaction and invoice and post to gl).
2. I have referenced this document to upgrading the EBS
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
To apply Oracle E-Business Suite Release 12.1.3, follow these steps:
1） 9239089
2） 9239090（US）， then applied the 9239090_zhs as I have the zhs language on the EBS 12.1.1
3) 9239095
Post-Update Steps
1. Apply post-install Oracle E-Business Suite Applications Technology patches. (Required)
4)9817770
5)9966055
2. Update database tier nodes with the Oracle E-Business Suite Release 12.1.3 code level.
Application tier:
Database tier:
3. I have applied the following patches before upgrading to 12.1.3(before step 2 as above)
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade
Patch E
B) For users on 11.1.0.7:
7111245 - 7684818 also includes 7111245 but this is a later version of the patch. Disregard errors related to 7111245 being installed when applying 7684818.
7211965
7330434
7486407
7627743
7639602
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
(I have compared the above patches with my db(ebs 12.1.1 ) and some patches have already been applied based on EBS 12.1.1), and the following patches were not included on the db, so I applied the following patches one by one
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
Modify Initialization Parameters
disablefast_validate=TRUE
pgamax_size=104857600
Can anyone help me on this issue? thanks!
Open AR forms such as transaction, receipt, etc, and always encountered the same issues as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
The AR forms opened failed. thanks!
Thanks!
Chuan Ling

Hi, Helios,
Thanks for your great help on this issues.
Here is my verification result for your reference as below
1.Known errors generated on the People form (PERWSHRG) [ID 206584.1]
10 - Error: FRM-40735:PRE-FORM trigger raised unhandled exception ORA-04062.
ORA-01403:no data found
APP-FND-01242:cannot read value from field: GLOBAL.G_NAV_NODE_USAGE_ID
Cause: The field: Global.G_NAV_NODE_USAGE_ID couldn't be located or read.
Resolution: This is an issue associated with multiple APPL_TOPS. Ensure
that references to the APPL_TOP are pointing to correct one.
I don't know how to fix this? do you know?
2.After Upgrade From R12.0.4 To 12.1.1 Property Manager Forms Give Error FRM-40735 [ID 1092394.1]
[r12app@infsgvm14 forms]$ strings -a $PN_TOP/patch/115/sql/PNPFUNCB.pls | grep '$Header:'
-- $Header: PNPFUNCB.pls 120.19.12010000.12 2010/03/26 10:43:10 rthumma ship $
my file's version is 120.19.12010000.12, so ignore this step
3.Property Manager Forms Error FRM-40735 After Upgrade From 12.0.6 to 12.1.2 [ID 1091124.1]
did you know how to set this 1) Please set Property Manager status to "Installed" via License Manager.
I don't find this on license manager.
4.Frm-40735 Ora-04062 When Trying To Open Transactions Form [ID 1363671.1]
just checked the custom.pll and custom.plx and they are existed in AU_TOP/resource, I want to re-generated this custom.plx using this
frmcmp module=CUSTOM.pll userid=apps/apps@hostname module_type=LIBRARY
but have some issues.
[r12app@infsgvm14 resource]$ frmcmp module=CUSTOM.pll userid=apps/[email protected] module_type=LIBRARY
Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.5.0 Production
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
so, it's strange.
Thanks!
Chuan Ling

Connection error after upgrade to 4.1

Similar Messages

Maybe you are looking for