Connection error Novell Netware 4.11

Nowadays I've changed the operating system from 10.3 to 10.4. But unfortunatelly I can't connect a Novell Netware 4.11 server. The server is seen in the server list, but if I try to connect, tzhere is an error messages: "This file server uses an incompatible version of the AFP protocol. You cannot connect to it."
Is the Novell 4.11 supported in Tiger?

The problem is that OSX.4.x lost the file transfer ability of Appletalk... 10.1.5 thru 10.3.9 had it!
http://docs.info.apple.com/article.html?artnum=301183
So, if you can't change Appletalk on the Server end to TCP/IP... ?

Similar Messages

Can mac os x lion connect to novell netware 5.0?

Hello - I recently deployed several new imac workstations (mac os x lion). Unable to connect to Novell Netware 5.0 servers via afp connections. Found link for
http://www.novell.com/communities/node/13155/afp-changes-osx-lion. Instructions did not help my situation. Has anyone been able to do this? Thanks

No, I do not know why.
I installed a new copy of Lion via USB Flash Installer. I have no iead about how to fix this problem.

Will Xsan connect to Novell Netware from Mac?

Will Xsan connecto Novell Netware? I recently was able to connect to Novell using Snow Leopard and since upgrading to Lion can no longer connect to the Novell.
Need to be able to get this working and have tried different methods but not successful.
Please help.

Xsan is just a filesystem. It doesn't connect to Novell. I take it you are having problems binding a Lion client to a Novell directory server, correct? If so, that's a problem between Novell and the Mac's Open Directory client.

Connecting OS X Server to Novell NetWare 6.5 eDirectory as a proxy

Have anyone tested to connect OS X Server to eDirectory as a "proxy"??
Macosxlabs.org had a WebCast in 2004 (#17) expalining integration with eDiretory and somewhere during the cast Dan Sinema from Apple mentioned this aproach of connecting to eDirectory and letting Workgroup Manager add/edit all OS X specific entries to directory. I this case you should not need to manually extend schema for Novell, but Workgroup Manager would do that for you.
I haven't tested this solution but I wonder if there is any practical experiance concerning this issue?
In my case I would like to connect OS X Server (Tiger, 10.4.8 UB or later) to Novell NetWare 6.5 eDirectory and have Novell take care of PC clients and OS X Server of macs as if it was standalone Master OD. The only thing taht I would like to sync is usernames and their passwords.
so if you have any ideas or practical expereance please share
MacBook Pro / PowerMac G5, xServe G5... Mac OS X (10.4.8)

Ataubman,
> in fact you'd be better off making that machine SLES
> and using it to host Win2008 and NW - MS do support Win2008 servers as
> guests under XEN on SLES
Or VMWare ESXi if your hardware is capable.
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

Heart beat could not open connection, error code 110

Hi, where can I find error codes for NFR and NSM?
I have problems with some agents connecting to the engine:
2/17/2010 16:02:55 EngineInterface: Heart beat could not open connection, error code 110
Both engine and agent runs on the same server (10.236.19.147):
AgentNCP Service Config
Host Address: 10.236.19.147
Service Ports: HTTPS: 3037 HTTP: 0
Data Path: /var/opt/novell/filereporter/agentncp
Debug Logging: Enabled
Heartbeat: 60 seconds
Engine Address: 10.239.19.147:3035
Use SSL: Yes
Alternate Hostname: huanovellfs1
Engine Service Config
Host Address: 10.236.19.147
Service Ports
Client HTTPS: 3033 HTTP: 0
Agent HTTPS: 3035 HTTP: 0
Data Path: /var/opt/novell/filereporter/engine
Debug Logging: Enabled
Heartbeat: 60 seconds
DSI Address: 10.236.19.89:8009
Use SSL: Yes
Scans per Volume: 2
Another OES2 server connects fine to the engine, butI have a Netware agent, which also fails to connect:
Feb 17, 2010 4:08:11 PM SR Interface: Heart beat could not open connection.
NFR is 1.0.0
Thanks for any input.
Istvan

Hi Istvan! Sorry for the delay in our response! we are in the process
of building a list of error codes for everyone! in the meantime the 110
means the following:
// Couldn't create a new network interface
#define CC_STATUS_CCS_CANT_CREATE 110
Is this an NSM integration installation?
Also, remove the alternate hostname.
If you don't mind, let's move this support issue to
filereporter"@"novell.com!
Thank you!
icseke wrote:
> Hi, where can I find error codes for NFR and NSM?
>
> I have problems with some agents connecting to the engine:
>
> 2/17/2010 16:02:55 EngineInterface: Heart beat could not open
> connection, error code 110
>
> Both engine and agent runs on the same server (10.236.19.147):
>
>
> AgentNCP Service Config
> ------------------------------------------------------------------------------
> Host Address: 10.236.19.147
> Service Ports: HTTPS: 3037 HTTP: 0
>
> Data Path: /var/opt/novell/filereporter/agentncp
> Debug Logging: Enabled
> Heartbeat: 60 seconds
> Engine Address: 10.239.19.147:3035
> Use SSL: Yes
> Alternate Hostname: huanovellfs1
>
> Engine Service Config
> ------------------------------------------------------------------------------
> Host Address: 10.236.19.147
> Service Ports
> Client HTTPS: 3033 HTTP: 0
> Agent HTTPS: 3035 HTTP: 0
>
> Data Path: /var/opt/novell/filereporter/engine
> Debug Logging: Enabled
> Heartbeat: 60 seconds
> DSI Address: 10.236.19.89:8009
> Use SSL: Yes
> Scans per Volume: 2
>
> Another OES2 server connects fine to the engine, butI have a Netware
> agent, which also fails to connect:
>
> Feb 17, 2010 4:08:11 PM SR Interface: Heart beat could not open
> connection.
>
> NFR is 1.0.0
>
> Thanks for any input.
>
> Istvan
>
>

Novell Netware 4.11 on Microsoft Virtual Pc 2004

Hello,
I have Novell Netware 4.11 SP9 running in a Microsoft Virtual PC 2004.
I can not get the network card to detect or work. This looks to be the
closest support group in the list that might have an answer.
The Virtual PC creates virtual hardware for the Intel / Dec 21140 network
card.
I know poeple have got 4.11 SP8a to work in VPC 2004 but I can't seem to
get it to work. Intel suggest I need:
NBI.NLM v2.25 9/17/98
MSM.NLM v3.95 5/12/99
ETHERTSM.NLM v3.8 3/1/99
Which I now have. I have tried numerous Intel and even some old Dec lan
drivers. Here is an example of the error.
LOAD SYS:SYSTEM\DC21X4.LAN SLOT=3 TX_THRESHOLD=4 RX_BUFFERS=5
FRAME=ethernet_802.3 NAME=DC21X4_1_E83
Loading module DC21X4.LAN
Digital DC21X4 Ethernet PCI driver v2.03 (960209)
Version 2.03 9 February 1996
(C) Copyright 1994,95,96 Digital Equipment Corp. All Rights Reserved.
DC21X4-NW-050: No PCI board found in machine!
SERVER-4.11-1553: Module initialization failed.
Module DC21X4.LAN NOT loaded
Any Ideas ?
(I have loaded the nbi, msm and ethertsm files manually but still do not
get card detection)
Thanks

I know nothing about VirtualPC and you will find many people here who know
more about VMWare which I could recommend.
Based upon my VMWare experience, make sure the NIC is configured Private/Host
Only or NAT.
It must be configured to appear directly connected to your LAN.
[email protected] wrote:
> Hello,
>
> I have Novell Netware 4.11 SP9 running in a Microsoft Virtual PC 2004.
> I can not get the network card to detect or work. This looks to be the
> closest support group in the list that might have an answer.
>
> The Virtual PC creates virtual hardware for the Intel / Dec 21140 network
> card.
>
> I know poeple have got 4.11 SP8a to work in VPC 2004 but I can't seem to
> get it to work. Intel suggest I need:
>
> NBI.NLM v2.25 9/17/98
> MSM.NLM v3.95 5/12/99
> ETHERTSM.NLM v3.8 3/1/99
>
> Which I now have. I have tried numerous Intel and even some old Dec lan
> drivers. Here is an example of the error.
>
> LOAD SYS:SYSTEM\DC21X4.LAN SLOT=3 TX_THRESHOLD=4 RX_BUFFERS=5
> FRAME=ethernet_802.3 NAME=DC21X4_1_E83
> Loading module DC21X4.LAN
> Digital DC21X4 Ethernet PCI driver v2.03 (960209)
> Version 2.03 9 February 1996
> (C) Copyright 1994,95,96 Digital Equipment Corp. All Rights Reserved.
> DC21X4-NW-050: No PCI board found in machine!
> SERVER-4.11-1553: Module initialization failed.
>
> Module DC21X4.LAN NOT loaded
>
> Any Ideas ?
>
> (I have loaded the nbi, msm and ethertsm files manually but still do not
> get card detection)
>
> Thanks
Craig Wilson
CNE3, 4, 5 - MCSE - CCNA
NSC Sysop (http://support.novell.com/forums/)
Tech Writer - http://www.ithowto.com
(I Peter 4:10)

Toshiba NB200 ZENworks 7 Novell Netware

Machine Specifications
Toshiba NB200
Realtek RTL8101E / 8102E(L) / 8103E(L) PCI-E Ethernet Controller v1.13 (081016)
Novell / Zenworks Software
Currently using ZENworks 7 Suite and the following imaging driver update (August 2009:
NOVELL: Downloads - ZENworks Imaging Driver Update for August 2009
Problem / Fault
Imaging up (to server) or down (to workstation) is very slow.
Error message received when trying to do an image.
Could not find the ZENworks Repository.
Activating manual setup program.
Anthony Hill
ICT Support Officer
[email protected]

i said that i was trying to modify the bootcd.iso. where would i find those directions?
>>> dmundric<[email protected]> 10/2/2009 12:06 PM >>>
File is located in SYS:TFTP\CMDS directory. If you are trying to mod
the bootcd.iso, that is another matter entirely.
Keith Larson;1865438 Wrote:
> there is no such file inside the bootcd.iso directory structure.
>
>
> >>> dmundric<[email protected]> 10/1/2009 12:16 PM >>>
>
> Hi Keith:
>
> Actually, the change is made to the z_maint.cmd if you are using
> Maintenance Mode and z_auto.cmd if you are using Automatic mode. As
> Anthony points out, just add that newid line to the end of either (or
> both) file with no carriage return. No need to restart ZFD or the
> server, the changes are hot.
>
> Keith Larson;1865326 Wrote:
> > I need to try this with the bootcd.iso I tried putting the same
> changes
> > into isolinux.cfg, but it didn't work for me.
> >
> >
> > >>> anthonywhill<[email protected]> 9/29/2009
> 6:36
> > PM >>>
> >
> > Hi there,
> >
> > I spoke to a lady at Novell and she was able to help with this
> > problem.
> > If you want to talk direct to myself I can give you the information
> > you
> > need.
> >
> > We are using PXE and we did the following:
> >
> > In the following directory there are a couple of CMD files:
> > \\fsbackup1\SYS\tftp\cmds
> >
> > You need to edit:
> > z_maint.cmd
> > z_auto.cmd
> >
> > With the following extra lines:
> > newid="0x10ec 0x8136,r8169" acpi=off modprobe fan modprobe thermal
> > This goes straight after the existing line/s of text, no carraige
> > return.
> >
> > If you need any more info, for example a boot CD settings please let
> > me
> > know.
> >
> > My e-mail at work is:
> > [email protected]
> >
> >
> > --
> > anthonywhill
> >
> ------------------------------------------------------------------------
> > anthonywhill's Profile: 'NOVELL FORUMS - View Profile: anthonywhill'
> > ('NOVELL FORUMS - View Profile: anthonywhill'
> (http://forums.novell.com/member.php?userid=23050))
> > View this thread: 'Toshiba NB200 ZENworks 7 Novell Netware - NOVELL
> > FORUMS' ('Toshiba NB200 ZENworks 7 Novell Netware - NOVELL FORUMS'
> (http://forums.novell.com/showthread.php?t=384124))
>
>
> --
> dmundric
> ------------------------------------------------------------------------
> dmundric's Profile: 'NOVELL FORUMS - View Profile: dmundric'
> (http://forums.novell.com/member.php?userid=10991)
> View this thread: 'Toshiba NB200 ZENworks 7 Novell Netware - NOVELL
> FORUMS' (http://forums.novell.com/showthread.php?t=384124)
dmundric
dmundric's Profile: http://forums.novell.com/member.php?userid=10991
View this thread: http://forums.novell.com/showthread.php?t=384124

Mac Pro and Novell Netware

Can Mac Pro connect to a Novell Netware server/LAN?

Naz,
There shouldn't be any issues connecting with the Mac Pro. How are you connecting today? Is your LAN on IP or IPX? What version of NetWare are your running? Are you connecting via NFA or an actual Novell Client in OSX? If it is via NFA then there is no change from how you do it today. As you know there are new 3rd party clients like the one from ProSoft.
http://www.prosofteng.com/support/netwarexip.php?faq=237
Hope that helps.

Using Novell Netware

Does anyone know how to use the novell netware with java?
esp. read out all connected users and send messages to them

Novell has 'LDAP Classes for Java' that may be of interest to you.
http://developer.novell.com/ndk/ldap-index.htm
With them you can authenticate to the NDS server and retrieve user information via LDAP. However, I don't know if this will contain a list of users that are currently logged into Novell.

Novell Netware Local Synch Issue

When a user of mine attempts to synch their local DreamWeaver CS6 site from a Novell Netware shared folder, the process seems to behave properly but upon subsequently attempting to manually delete/replace those same files on the Netware share, they are presented with the following Novell error:
"Folder Access Denied
You need permission to perform this action.
You require permission from S-1-1-0 to make changes to this folder."
We have proven that these same files/folders operate normally for her at their location UNTIL DreamWeaver's synchronization is introduced into the equation. Once DreamWeaver has acted on them, they produce the error. Apparently something involved in DreamWeaver's transfer/lock is causing these permission issues. Any insight/advice would be greatly appreciated.

Gonzalezjohnj,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Data Federator data source not available causes Universe Connection error

I created a Data Federator project that connects to 20 servers across US and Canada. All data sources are SQL Server 2005. The DF project maps 40 source objects into 4 target objects. I created a universe based on the DF project and we have been quite pleased with Webi query response. Today one of the source servers was taken off line and this generated a connection error when trying to access the universe (not trying to access the data source that failed). We do not want the universe connection to error when one source server is not available u2013 is that possible?
If the answer is no then I see us abandoning what appears to be a great solution for real time distributed reporting and resorting to ETL and moving data.

Hi Chapman,
Can you be little elobrate on what you have done to solve the issue.
Thanks,
Dayanand

RFC connection Error in SLDCheck

Hi All,
I am trying to logon to Integration builder for that i getting the ESR builder address is not maintain. for this i have chk in SLDCheck t code ,there i am getting LCRSAPRFC connection error.I have test the RFC connection in that i am getting the
the error in register server program
Error Details     ERROR: program LCRSAPRFC_XID not registered
now wht i have to do for troubleshooting
Regards

Thanx for reply
when I test connection to Connection Test SLD_UC     error
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program SLD_UC not registered
Error Details     LOCATION: SAP-Gateway on host sapdevpi / sapgw00
Error Details     DETAIL: TP SLD_UC not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 62
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1778
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Fri Jan 8 11:05:42 2010
Error Details     VERSION: 2
RFC SLD_UC is connection T
Gateway Host sapdevpi
Gateway server sapgw00
same error with
Connection Test SLD_NUC
Connection Test SAPSLDAPI   ( program Id SAPSLDAPI_DPI )
Connection Test SAPJ2EE
In Connection Test LCRSAPRFC error program id LCRSAPRFC_DPI
Logon     Cancel
Error Details     max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
Error Details     ERROR: max no of 100 conversations exceeded
Error Details     LOCATION: CPIC (TCP/IP) on host sapdevpi
Error Details     COMPONENT: CPIC (TCP/IP) with Unicode
Error Details     COUNTER: 82
Error Details     MODULE: r3cpic_mt.c
Error Details     LINE: 10791
Error Details     RETURN CODE: 466
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Fri Jan 8 11:12:56 2010
Error Details     VERSION: 3
Regards
shahid

RFC connection error between Netweaver 7 EHP1 and Ides ECC6

Hi Friends,
I try to create source system in BI from Netwever EHP1 to IDES ECC6 EHP3.
During the creation I get a connection error, says. check connction parameter.
I checked the parameter, everything is fine. Server, System and number.
When I went to the SM59 and created a connction.
I.E. with the same parameter like system = 06 and server = compi9 gave client 800 etc.
The Host name is resolved to 192.168.2.111 wich is OK.
But when I run the connection test it shows me "ERROR: partner '80.156.86.78:sapgw06' not reached"
I have no idea where this IP '80.156.86.78" is comming from.
No Problem with the opposite way, from Ides to NW and login to the System is OK too.
Can anybody help me with this problem.
RG. Jimbob

Hi,
What is the next screen that comes up when you click on remote logon.
If no screen comes up then:
Check the user type of the user id used for this RFC.
It should be either dialog or service user for able to remote login.
If it open a new window and asks for password, then its excatly password issue.
Also make sure that the password is in numeric and correct.
Also make sure that the current user check box is unchecked.
Even if it dosent work, delete the connection and create again.
Please award points if helps.
Thanks
Santhosh

RFC connection Error

Dear All,
    when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details     DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 162003
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1973
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Mon Apr 27 14:29:33 2009
Error Details     VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.

mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat

RFC Connection error in SM59 for SAP J2EE

Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon              Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program sapfallback not registered
Error Details     LOCATION: SAP-Gateway on host filip / sapgw00
Error Details     DETAIL: TP sapfallback not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 1483
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1694
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Tue Mar 31 02:44:35 2009
Error Details     VERSION: 2
Help me resolve this
Regards,
Mahesh.

Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan

Connection error Novell Netware 4.11

Similar Messages

Maybe you are looking for