Connection error on e51 after update

i cant connect to internet after update my e51
when i go to web and want to connect, see this error: connection not available.
plz help me.

what i wud suggest is to reformat ur phone............
*#7780# - Restore factory settings - resets all the settings to the default
*#7370# - Reformat your phone
Phone reset code: *#7370# with lock code 12345
Articles posted courtesy engadget
keep us updated about the progress.... if u like wat I have to offer then click on khudos.

Similar Messages

Why can't I connect to Itunes store, after updating my ipad to OS 6?

Why can't I connect to Itunes store, after updating mt Ipad to Os 6?

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the iPad

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network , restarting iPad , ...

The same story. No 3G after updating to 6.1. Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1

Why can't i connect to my iphone after updating to 7.1.1? i don't even get the screen that lets me login into my apple account??? plz help my phone was stolen and through help of the police i recovered it and now i can't access my phone

why can't i connect to my iphone after updating to 7.1.1? i don't even get the screen that lets me login into my apple account??? plz help my phone was stolen and through help of the police i recovered it and now i can't access my phone

You must have had find my iPhone on, or it was locked by your phone carrier.
Call your our cell carrier first.
then log on to a computer to iCloud to erase your iPhone.
NOW... You will be able to setup with a backup.

HT4623 I cannot connect to my wifi after updating to iOS 6

I updated my iPhone 4s to iOS 6. I cannot connect to my wifi after updating to iOS 6. I updated while connected to iTunes. I can no longer connect to the wifi that I had previously used at that location. However, I can connect to all of the other wifi areas I had previously connected to ie. home, coffee shop, etc.
I have tried turning off cellular data.. Other than not being able to connect to my office wifi it appears that iOS 6 is working properly..
Thank you in advance for your assistance

I have the same problem too and I have not been able to "fix" it. It is very frustrating! My other electronics connected to my wifi: pc, ipad, iphone 3G,and TV they all working fine. I went to the Apple store and they say this problem is ralated to my network provider, then when I went to AT&T they say it is Apples problem. Who do you believe?
Luis

My Ipad 2 is not charging or connecting to the pc after updating it to IOS 6.1.3

My Ipad 2 is not charging or connecting to the pc after updating it to IOS 6.1.3, what shall I do ?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

HT201263 Since my iPhone 4S was stuck on the connect to iTunes screen after updating to iOS 7, I followed these instructions and restored. But nothing changed! I still have the same picture of a plug with arrow to iTunes.

Since my iPhone 4S was stuck on the connect to iTunes screen after updating to iOS 7, I followed these instructions and restored. But nothing changed! I still have the same picture of a plug with arrow to iTunes.

It is restored now. Thanks for the comment about disabling firewalls - we did that and tried again and it worked.

I get a "connection error" when trying to update/install Flash Player

I have a previous version of Flash player so I was trying to update it. The installation doesn't make it past 5% before saying "connection error". I have tried all the troubleshooting steps and even tried to uninstall it. When I try to download the uninstaller, I get a page on safari that says "safari cannot connect to server" (I also tried on firefox too, same problem). I have tried to locate it in my toolbar and applications to uninstall it from there with no luck, it has completely disappeared. Not in my trash, nowhere. Not sure what else to do. I am running on Mac OS X 10.7.5. When I have Adobe check to see if it is installed on my computer, it says that a previous version is installed, 16.0.0.

Hi,
Can you Please provide Configuration of your XP, Win7 Machine [How to post a screenshot in the forum]?
To check if Windows 7 Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
The basic information about your computer page will open.
To check if Windows XP Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
Click System and Service Pack Information will be listed
Please also attach log [Where do I find the Flash Player installation log on Windows?], [How to share a document] and Share the Current Version of Flash Player goto - [https://helpx.adobe.com/flash-player.html] and click on Check Now button, using about method can you place the screenshot.
Meanwhile you can also try cleaning Application Temporary Data and Try again. [c:/users/username/appdata/local/temp folder - Microsoft Community], Due to some reason the Installer file is getting corrupted which might be blocking Flash Player Installation. After cleanup try using the offline Installer [Installation problems | Flash Player | Windows]
Thanks
Piyush

HELP PowerPC G4 OS 10.3.9 Unable to connect to base station after updates

OK...I have read many topics that seem to be related, but after trying all of the suggestions I could find, nothing is working....PLEASE HELP:)
I have a PowerPC G4 running OS 10.3.9 I completed the suggested software updates, and now I can not connect to the internet wirelessly. I keep getting the error message that my password is incorrect. This is not the case.
The software updates that I ran were for iTunes, Java, Airport(probably the problem) and security updates.
The current version of airport utility I am running is 4.2 is there anywhere I can download an older version? My wireless connection worked just fine before I updated.
Please, this is driving me CRAZY! If anyone has any ideas please post.

Hi,
We are running like units, with the same airport version 4.2.
Have you checked in "Keychain Access" for the password it is looking for? After updating mine once (a while back), the system reverted to the first one I had (but had changed since then).
To get to Keychain Access, us Finder and put Keychain Access in the upper right search box. When you get in, scroll down to the name of the network and click "Attributes". There in the lower left is "Show Password"... check it. It will now ask for your Admin/Keychain password (which will be the same if you have NOT made a separate Keychain password). Allow Once below the password entry. The password it wants will be below the box you checked to show it.
If you have changed it or have more then one by that name, it may be time to delete the older version(s) so keychain only has one to look for, not 2 or 3 like I had. If there is more then one, try all the passwords but remember MAC OX tunes out after some 3 tries, you will have to shut down and restart to get 3 more tries. Careful with deleting any till you find the right one, or the one it wants.
If these do not do the trick, let us know and we will try some other things...
Enjoy

Phone stuck on connect to itunes screen after update attempt

Hi, hope someone can help me. I connected my iPhone to my computer to transfer my photos from the phone to the PC. I have automatic syncing turned off.
When I connected, I was prompted to update the iTunes version, which I did. It's now version 9. Then I attempted to update the iPhone version. I got a message saying I had to transfer my purchases first, which I did. Then I tried the update again. The update seemed to take awhile, then I got a message saying it failed. There was a "More Information" button which just prompted me to send info to Apple, which I did. Unfortunately I didn't save the info.
At that point all my iPhone info no longer showed in iTunes, and the only active option is Restore. It does say "Your iPhone software is up to date," which would seem to indicate that the update did work...I tried disconnecting and reconnecting my phone. When I do this, I get the message "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
I would rather not Restore the phone unless I have no other options, since I have 600 pics, contacts, etc on the phone...Of course not backed up since this is the first time I've tried to transfer data.
So I tried a few things:
- I disconnected and reconnected the phone several times.
- I restarted the computer several times.
- I went to the Apple site and tried the troubleshooting steps for "stuck on connect to itunes screen" (which is what my phone is currently doing).
- I ran the diagnostic checks in iTunes (output below - I ran this while the phone was plugged in yet it says it's not found).
- I held down the Home and the Sleep/Wake button until I see the Apple icon.
- I went to My Computer > Manage and tried to update drivers, but the phone doesn't show in the device manager.
- I tried a different USB port and there are no other devices connected to the machine.
Nothing worked, my phone is stuck on the connect to iTunes screen and I get the error message every time I plug it in. I haven't tried another computer bc I don't have one and I'm not sure how to create/use another user account on this machine.
I wouldn't mind calling support but my phone doesn't work...Any help is much appreciated. Thanks in advance.
============
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
ASUSTeK Computer INC. 1005HA
iTunes 9.1.0.79
QuickTime 7.6.6
FairPlay 1.7.16
Apple Application Support 1.2.1
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.0.0.102
Apple Mobile Device Driver 1.46.0.0
Bonjour 2.0.0.34 (214.3)
Current user is an administrator.
The current local date and time is 2010-03-31 02:42:39.
iTunes is not running in safe mode.
Video Display Information
Mobile Intel(R) 945 Express Chipset Family
Mobile Intel(R) 945 Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-03-31 02:22:42.
** iPod/iPhone Connectivity Tests **
iPodService 9.1.0.79 is currently running.
iTunesHelper 9.1.0.79 is currently running.
Apple Mobile Device service 3.0.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Device Not Currently Connected:
Fifth Generation iPod (iPod with video) running firmware version 1.3
iPhone 3G running firmware version 3.0
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.
Message was edited by: gobblygook
Message was edited by: gobblygook

Your only choice at this point is to restore your iphone. Since it appears from your post that you have never synced to this computer, you of course will not have a backup to restore from. That means your only choice is to restore as a new device & re-sync your itunes content. Unfortunately, all of your contacts, calendars, pics in your camera roll, etc., will be lost. Its not a good idea to use the iphone or any phone for that matter as a storage device, as things like this can & do happen. You should be syncing on a regular basis. The first thing done when you do sync is an iphone backup. You should also transfer pics in your camera roll to a supported application on your computer on a regular basis, much like any digital camera. You can always sync pics back to your phone, but if the only copies are on the phone, you run the risk of losing them.
See if you can force the phone into recovery mode:
Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

Cannot connect to 4G network after update to OS 10.3.1

Have a Q10 through Sprint and after updating to OS 10.3.1 from the Blackberry site, phone will now only connect to 3G network despite availablity of 4G network. Phone used to connect to 4G network with OS 10.2,

I do have same problem, i'm unable to connect to even 3G network and it connect to 2G network only when there is full network
My page on: App World
Check out my Apps 1). QFileExplorer 2). My ABCD
System Explorer APPID: 35601892

Iphone 4s cannot auto connect to home wifi after updating to ios 6.1.2

My iphone 4s will not auto connect to my home wifi after updating to IOS 6.1.2. I can manually connect to my phone to wifi but it will get disconnect if I'mnot using the phone. Any way to reslove?

Once the phone goes into sleep mode, it is supposed to auto disconnect from wifi to save battery. Are you saying that once you wake the phone up it will not auto connect at that time?
Suggest you try and forget the network, then go in and try the reset network settings again and then try to rediscover the network and connect again. Have you tried to do a reset of the phone, but holding the sleep/wake and home buttons together until you see the Apple logo and then release?

My wifi connection shows limited access after updating my window 8.1

Hy wishes for all of you. Having trouble after update my window 8 to 8.1. Perhaps the wrost day of my life. After update lost my Internet connection. It's shows limited connection and unindentify network. I search different post on Web regarding this problem and applied but all in vain. I would like to restore my old window but I don't have backup so now have true in trouble kindly help me out
Would be thankful to all of you
Regards

Hi:
If you live in the USA, you can order recovery media by clicking on the link below, select the W8 operating system, click on Order Recovery Media.
http://h22207.www2.hp.com/us-en/drivers/selfservice/hp-envy-m6-1100-notebook-pc-series/5296045/model...
Did you try this W8.1 wireless card driver?
http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_142231_1#tab1

TS1538 my iPad is stuck on the connect to itunes screen after updating.

I have seen several post about screen locked on the iTunes connect after updating software. I have tried all these methods. My iTunes does not recognize my device and my device will not turn on so I cannot do a reset. I tried the hard reset by pressing both the home button and the on/off switch and then connecting to my computer. My computer dings like a new device was connected but I cannot see my device in iTunes.
Suggestions appreciated.

If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.

Error Code 0x80043c21 after updating to desktop manager 5.0

After updating to desktop manager 5.0, I received this error code while trying to sync. Any idea what it is and how to fix it, I can't find anything on this particular error code.

lornes1123 wrote:
I can no longer sync with Outlook. All was fine until this morning when I got this message each time I try to Sync All. What do I do ?? HELP please.
Thank you.
I suggest you activate advanced logging and see if the resulting log offers you anything useful.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Connection error on e51 after update

Similar Messages

Maybe you are looking for