Connection Error - Server BUSOBJ-JF00:6400 not found or server may be down
Good afternoon.
We have a Business Objects 3.1 installation on Windows 2003 that was running fine up until recently. While trying to log on to any BOBJ function the error Server BUSOBJ-JF00:6400 not found or server may be down (FWM 01003) null is seen.
I am unable to logon to the CMC or any Admin function with the Administrator user either.
The SIA is up and running yet no service is listening on port 6400 when I do a netstat.
In services it says that the BOEMySQL is running.
It is a 3.1 upgrade using MySQL DB. Any hints as to what to look for?
I do have an OSS open for this right now, but no response yet.
Hello,
try the following:
1. Connect remote to the Server using RDC and try to log into InfoView there
2. Can you connect with any Client?! Like Designer or something
3. Ttry to LogIn to InfoView using IP_ADRESS:6400
4. Can you ping the Server ?
5. When you say you did an upgrade did you used the "Update Objects" function in the CCM after migrating the Repository ?
Regards
-Seb.
Similar Messages
-
Error: Server BALAHSAN01:6400 not found or server may be down (FWM 01003)
Hi All,
I am a beginner with BO.
I installed BOE (Version XI 3.0) on my machine. Just after the installation, all the tools were ok.
After logging out of windows, I have the error "Error: Server BALAHSAN01:6400 not found or server may be down (FWM 01003) null" when I try to connect to the CMC or InfoView.
My configuration is : Windows XP SP2. I'm using MySQL5 and Tomcat. ports have not been changed.
Note : my server is the localhost (no firewall!). MySQL5 does work.
Do you see any reason to this?
Thanks,
Daniel
N.B: I've seen the discussions for this error in the forum, but the configurations were not the same ones (remote servers...)This forum is dedicated to general topics related to Business Objects solutions not actual technical queries.
Please post this query to the Business Objects Enterprise Administration forum:
BI Platform
That forum is monitored by qualified technicians and you will get a faster response there. Also, all BOE queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Ludek -
Hi
I installede BOE in a Server, Just finish the installation I want launch the CMC, but i can access, i have this error u201Cu2022 Error: Server myserver:6400 not found or server may be down (FWM 01003) nullu201D
I install Business Objects XI R3.0 and Tomact, on Windows Server 2003 R2 Standar Edition SP2 and the repository is Microsoft SQL Server Express Edition.
Does anyone have any idea that might be? thanksPlease post this query to the Business Objects Enterprise Administration forum:
BI Platform
That forum is monitored by qualified technicians and you will get a faster response there. Also, all BOE queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Ludek -
I purchase a movie on iTunes, when I tried to view I get error massage, requested ULR is not found on server. What does this mean and how can I view this movie.
familyfromapo wrote:
The movies are Dexter that we purchased at a store. He uses the Air and since it does not have the disk option this is how we were hoping he could view his shows. We had no idea we would be breaking the law....just wanted to put all of the movies we have purchased on the external solely for the intent of our viewing.
Thank you for your time and help.
Sorry.
It is illegal to break the encryption to copy a dvd.
Judge: DVD-copying software is illegal - CNET News
Judge Rules DVD-Copying Software Is Illegal | Threat Level | Wired ...
MPAA Says Making Even "One Copy" of a DVD is Illegal -
Error message says url was not found on server what can I do? I already downloaded 3.
I cannot get on fire fox it comes up as my home page and then says the request url for 3.6.11 was not found on server, i can get on by going through google
Try contacting Apple through the Contact Apple Support site and letting them know about the problem.
-
Error: Server not found or server may be down (FWM 01003) null
I installed Crystal Reports Server 2008. The server is a new install of windows 2003 server fully service packed... The ony connection to SQL is through an ODBC connection to a seperate MSSQL Server. I did not set a password for the CMC and checked the "change administrator password later". When I try to log in to the CMC I get
Error: Server srvreports:6400 not found or server may be down (FWM 01003) null
I am connecting through an ODBC using a trusted connection... Should I not do it this way?
I have tried uninstalling several times... including specifying a password.
Thank you in advance for the assistanceHi Abhishek,
The Central Management Server (CMS) is responsible for maintaining a database of information about your BusinessObjects Enterprise system, which other components can access. The data stored by the CMS includes information about users and groups, security levels, BusinessObjects Enterprise content, and servers
- Maintaining Security , Managing Objects, Managing Servers, Managing Auditing.
SIA is the Server Intelligence Agent. Server Intelligence is the underlying server management architecture that simplifies the administration and deployment of BusinessObjects Enterprise servers and services. When you start a SIA you can configure all, some, or none of the servers contained in/managed by the SIA to also be started. All BO servers in a SIA must belong to the same cluster. The SIA maintains server status according to the settings you specify in the CMC. It processes the CMC's requests to start, stop, monitor, and manage all servers on the node, and it also monitors potential problems and automatically restarts servers that have shut down unexpectedly. The SIA ensures optimal performance by continually monitoring server status information, which is stored in the CMS database. When you change a server's settings or add a new server in the CMC, the CMS notifies the SIA, and the SIA performs the task.
The SIA is automatically configured during installation, but you can change these default settings through the CCM. -
Problem with Home Sharing. Getting the error "The Requested URL was not Found on this Server"
I recently purchased an iPhone 5. As I do with all of my AppleTVs, iPads, iPods and an iPhone 4 in my home, I connected the 5 to my home network and accessed the shared video library using home sharing. My iTunes library is roughly 85% iTunes purchases, a handful of videos taken with iOS devices, and some video ripped with Handbrake. All of these videos work fine on all devices in my home except my new iPhone 5. When I access the shared video library on my iPhone 5, all of the textual data for all of the videos appears, however, I can only get the iPhone to play 1 video of the dozens in my iTunes library. When I try to play any other, I get the error, "The Requested URL was not Found on this Server."
Interestingly, only one video in my entire shared library displays the artwork associated with it in my iTunes library on my iPhone 5, and that's the one I can stream without a problem. Even more interestingly, that video I am able to stream was ripped using Handbrake (there are a number in my library ripped using Handbrake, but just this one will stream to my iPhone 5 for some reason).
I'm using the latest version of iTunes (10.7) on my home (iMac) computer (running OSX 10.8.2- Mountain Lion)and of course iOS 6 on the iPhone 5. I've tried resetting my iPhone several times as well as restarting my iMac which holds my iTunes library.
Does anyone have any ideas as to what's going on?Can you see if you can view index page from a browser on iPhone.
Have you seen live streams working from a different computer...
if not then check if a proper crossdomain.xml file in its place(webroot folder). -
HTTP Connection to R/3 System error- HTTP/1.0 404 Not found
Hi,
I am using a HTTP connection to XI to extract data from R3 to XI. The HTTP connection I have created in R3 are getting an error - "HTTP/1.0 404 Not found" while testing the connection.
Porperty maintained in the connection:
Terget host = <XI server address>
Service No = 8000
Path Prefix = /sap/xi/engine/adapter_plain?
The exchange profile in XI (PI 7.0) system is as follows:
com.sap.aii.connect.integrationserver.r3.httpport = 8000
HTTP port is set as 8000 in SMICM services.
The same type of connection is working fine in the lower PI and R3 environment but failing on productive system.
Thanks for your help.
RegardsHi,
Well... you are trying to configure a HTTP RFC destination in SM59, aren't you?
Dont worry about that. It is just a warning. Click on return or space bar after typing path prefix.
Then save and test the connection.
Carlos -
Error on WWI server EHS_GLM_GENSERV: Results file not found on production
Hi Experts,
I need some help/advice. We have issues with our new EH&S WWI server.
This new setup working OK with Dev and QA (the WWI and GLM part is just fine), We did try to link this server to production then it gives below error.
Only difference between existing WWI QA and production server is that
Existing QA and development WWI server installed at location C:\Program Files (x86)\EHS\WWI
And Same path maintain on new server C:\Program Files (x86)\EHS\WWI
But existing production WWI server installation path is different C:\Program Files\EHS\WWI
So is there any customizing changes required from SAP side to avoid this error on production
Can you please advise on this.
================================================================================
Error on WWI server EHS_GLM_GENSERV: Results file not found
Message no. C$830
Diagnosis
The results file of the generation was not found on the WWI server EHS_GLM_GENSERV.
System Response
Generation was not carried out.
Procedure
Advise your system administrator to check the WWI installation on the WWI server EHS_GLM_GENSERV.
Check the Windows event log on the WWI generation server. The event log may contain other error messages.
SAP Note 1058521 provides possible solutions for this error.
==================================================================================
Log shows
============================================================================================================================================
E000 Error: OLE Exception (-2146823114) from Word8_OpenDoc (docs.Open) by Microsoft Word: This file could not be found. (C:\Windows\...\r00000000000001422051.rtf) (HRESULT Code:5174)
E000 Error opening document (Word8_OpenDoc: Documents.Open failed)
================================================================================================================================================Hello Gajanan,
the path of the temporay workfolder can be configured in the IMG. Often this path is setup as the WWI server installed location but it is just a temporay workfolder which must exist on the WWI server. The path can be configured under:
For ECC 6.0 Ehp 0-2 and lower
Environment, Health and Safety -> Basic Data and Tools -> Basic Settings -> Specify Environment Parameters
For ECC 6.0 Ehp 3-6
Environment, Health and Safety -> Product Safety -> Global Label Management -> Make Settings for Basic Data
For ECC 6.0 Ehp 7
Environment, Health and Safety -> Global Label Management -> Set Basic Data and Tools for Global Label Management -> Make Settings for Basic Data -
After uprading to iOS 5.1 I can no longer play videos in my camera roll. I just get the following error "The requested URL was not found on this server".
Anyone have any ideas?You have two choices to try & fix this: 1. Backup your phone, then restore as a new device, then restore from the backup you first created, or 2. Follow the advise from this poster:
I had the same problem with the black blocks after upgrading to iOS4 on my iPhone. The reason for the black blocks is that the thumbnail images for those particular images have not been created when the Photo Library has been updated to iOS4. I followed the advice on a couple of blogs and fixed the problem.
1. I downloaded iPhone Explorer free software (http://www.macroplant.com/iphoneexplorer/) so I could view the photo data folders on my phone. I could see that the thumbnail images were missing.
2. I followed a slight variation on the instructions on this blog. (http://blog.mbentley.net/2010/06/iphone-ios-4-upgrade-restore-lost-pictures-in-c amera-roll/)
3. First I copied the Photo Data folder by dragging it from the iPhone Explorer window to my Mac desktop.
4. Through iPhone Explorer I deleted the info.plist file in the Media/PhotoData/MISC folder.
5. I also deleted the Photos.sqlite and PhotosAux.sqlite files in Media/PhotoData.
6. I then rebooted the phone and launched the Photo Library.
7. The Library rebuilt it's self again and recreated the thumbnails.
8. The problem was fixed!!! Thank you M Bentley!
I hope this helps - this has been bugging me for 2 weeks.
Regards
Alijm23 -
Error: The requested URL was not found, or cannot be served at this time.
Hi gurus,
I have a report that has a parameter file. When I call the report the parameter form is displayed but after I enter the parameter values and click SUBMIT QUERY, I receive this error:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Reports Server name is not specified.
If I run the report without parameter file it runs fine.
Does anyone have an idea on how I can make this work.
Thanks* Can you please tell what version of Reports you are using ie 6i or 9i and the exact version [ In builder give Help->About] . In this problem we cannot deduce anything from the version. But if it is very old, we can recommend installing the latest patch.
* Please post the full command line request. If you have used any keys in cgicmd.dat , please post the expansion of that keys also.
* If possible as a workaround give paramform=no¶mName=paramValue ... in request till this problem is resolved.
Thanks
The Oracle Reports Team -
My movies are giving a URL not found on server error message, last week they worked fine. After deleting one of them, I don't get any retries for a free download. How do I contact the seller to complain? Obviously the one of the other movies first..
Stan -
Thanks again for the simple but valuable tip.
I'm just going to repeat the relevant sections from my previous post with the screenshots this time:
Below you'll see a snip of how my current folder structure appears. It's identical to yours, except there are no button files in the General Folder. Since you were kind enough to include a file name, I did a search on that specific one and it's nowhere to be found on my hard drive. Hmmm....
I've seen others remark on how... "challenging".... Adobe's instructions can be sometime. I'll admit to having the same feeling when I was trying to download and install all the content files and the 7-zip stuff. Is the answer somehow that I screwed up that? Note the 7-zip folder right above the Adobe folder. Here's a screen shot of that expanded folder contents:
Does that look like you think it should? Have I not installed or extracted something correctly?
Finally, the only other thing I can think of to give you as much info as you might need is to include a screenshot of where the "Functional Content" stuff got saved. Adobe's instructions about this (if I recall correctly) were that it did NOT have to be installed anywhere specific, but you then had to go into Encore (& Premiere) and through preferences point to this stuff, which I believe I did. But I don't see any button type files in these anyway.
Other thoughts or advice?
Thanks! -
Connection Error.
Digital Editions could not connect to the activation server. Please make sure you are connected to the internet.
I am using a PC windows 8You should check if Firewall Adobe Digital Edition blockt.
-
get error: Connection Error Detected. DE could not connect to the fu
lfillment server. Please make sure you are connected to the internet. I am.Please restart your machine and try again.
Thanks -
Getting error msg Server returned:AXLParser: 'maxy' not found in ENVELOPE
I get error message. Server returned:AXLParser:'Macy' not found in ENVELOPE
Cannot get graphics on Lincoln county GIS. Please adviseIt's a server error. Nothing to do with your computer.
Maybe you are looking for
-
How to pay a forign currency invoice in another currency payment in R12
Hi, I have Oracle R12.06. How to allow cross currency payment, for example : I have an invoice in USD , i need to make an payment for that Invoice in EUR or any other currency sometimes functional currency. I already check the allow Multiple currency
-
How do I change the speed of my delete and arrow keys?
On my MacBook Pro i am running OS X 10.8.4. My arrow and delete keys used to go at a normal speed, but now i have to click them each time i want the text cursor to move one space. How do i fix this?
-
Is there a ring flash that fits around the Raynox 'snap-on' style Macro lens?
I have a Canon G11 and use the Raynox Macro lens (MSN 202) for photographing snowflakes. Is there a ring flash that is made to specifically fit the Raynox lens or is it a case of buying one with a large enough internal diameter (something like the Po
-
How to repair a damaged jpg file in iphoto Library
I hace some damaged jpegs in my iphoto Library which i want to repair. I've used stellar software but no results. does anyone know a really good tool to repair jpegs?
-
Finder: annoying repositioning
Hi all, Already a problem in Mountain Lion and unfortunately still there in Mavericks: Finder will reposition itself somewhere near the end of the file/folder list after expanding or collapsing a folder. This is especially the case when sorting seque