Connection failed ... Connection unavailable

I bought nokia 701 two days back. My service provider is Reliance. Yesterday I
downloaded and installed Facebook and Opera from ovi suite. Also i inserted my
Vodafone sim card to copy contacts to phone. Afterwards I am not able to connect
GPRS. It says "Connection failed ... Connection unavailable".
My "mobile data" is set to ON mode.
I have contacted Reliance customer care, but they are not able to solve the issue.
Please help me out.
Solved!
Go to Solution.

Same solution for me too - for E6 with Airtel.
I uninstalled Fsecure mobile security, reinstalled the phone software through Ovi Suite & now I am not getting the "connection failed, connection unavailabe" error. It's very strange, since Fsecure came pre-loaded on Nokia E6 and is also available in Nokia Store.

Similar Messages

N8 Connection failed / Connection unavailable for ...

My N8 C: was always running out of memory so I thought of doing a Hard Reset.
I backed up data, Hard Reset(wipes off all memory), Restored.
Now I am able to find my WiFi hotspot but not able to connect, it says Connection failed / Connection unavailable.
WiFi hotspot is created using Nokia E72 JoikuSpot which worked smoothly prior to Hard Reset but not now. My other devices are still able to connect to the hotspot so everything is fine at Joiku in E72.
I have tried Soft Reset, Hard Reset of my N8 and even deleting the HotSpot from saved connection & then re-saving it.
Pls advise.
Using Nokia Lumia 1320.
Also have Nokia E72 & Nokia N8.

Replying for an update because i had this problem, fixed, but have it again:
Well I did about a month ago i had the same problem with the mobile data saying connection failed. I did the soft restand then hard reset, but then still had the issue. I deleted all the access points and then took out the sim card. Put the sim card back in and then had to manually setup my access point.
That worked, not sure if it was one specific thing or the whole combination.
but now the same problem is back, the mobile data not working and saying connection failed/connection unavailable. Cannot get it fixed no matter what i try so far (tried resets, manually inputting apn settings again, etc)
my wifi works by the way.
Did you find a fix or does anyone have any suggestions?

808 "connection unavailable", "connection failed" ...

Hello,
I've had issues (gallery and SMS, maybe will post to other threasds) with my 808/Belle FP2 and tried to backup/hard reset/restore data to fix them.
After hard reset (with data deletion) my 808 reported "connection unavailable" and "connection failed" when I attempted any data connection, both GPRS and wi-fi. The second hard reset has fixed this issue, however after restoring data this happened again. Soft reset did not help (maybe second one would).
...the 3G and wi-fi updates do not affect this

Seems that the issue lied in combination of Nokia Suite and Eset mobile security (beta).
The eset mobile security was not restored with other installed applications, but installing prior to restoring applications and settings did help.
I guess that firewall settings were restores, but not the application that manages the firewall (eset mobile security).
Unfortunately I was not able to install it before, installation apparently requires network connection.

808 - Connection failed Connection unavailable mes...

I just received my 808 replaced by Nokia for the 3G bug issue. Now I have been noticing that annoying Connection Failed connection unavailable message every few seconds. Turned the positioning methods OFF and the frequency of the error message goes away but it still pops up every few minutes. I did a hard reset, removed the memory card where most of my apps are installed and it still gives me that same error. Ordered a new SIM to see if that makes any difference - none - Still same error message. That message is so annoying. Anyone have any other ideas that I could try ? Privacy mode is OFF also.

geeknc wrote:
I just received my 808 replaced by Nokia for the 3G bug issue. Now I have been noticing that annoying Connection Failed connection unavailable message every few seconds. Turned the positioning methods OFF and the frequency of the error message goes away but it still pops up every few minutes. I did a hard reset, removed the memory card where most of my apps are installed and it still gives me that same error. Ordered a new SIM to see if that makes any difference - none - Still same error message. That message is so annoying. Anyone have any other ideas that I could try ? Privacy mode is OFF also.
Have you assigned a data connection preference for browser and other apps requiring data ?

Connection failed.Connection unavailable on c7 Bel...

Finally Nokia has updated social network software on Nokia Belle. I thought it would solve the problem,but still when i open default applications such as Facebook,Twitter, Check in, Social networks in upper right corner it shows message "Connection failed. Connection unavailable".On any other application there is connection. I would like to suggest Nokia to transfer to some other software,because they dont know how develop own. This is the message from unsatisfied customer,because my Nokia is not working correctly for about 1year,from release of Nokia Anna. Or maybe you have solution for my problem after 6 months?

I'm having this problem too for a while now. I have done a few hard resets and I've managed to get the 1.3.236 version working and connecting just so I can upload photos on facebook. I can now see another update (1.5.216) available but I'm still afraid to update because it might not connect. Another app which I was using and is now facing the same issue is AccuWeather. I will have to upgrade my contract soon and the Samsung Galaxy S3 looks better than the Nokia 808 Pureview from where I'm standing. I'm looking forward to video calls with Skype and a proper facebook app

Sandbox cause my app kept connecting unavailable network drive

Sandbox cause my app kept connecting unavailable network drive, can it be fixed?
I have to manually delete sandbox config every time to prevent app hang.

Hi Jaggs,
   nice question!
   I think the problem is that is not only your LabView application which stops, but the Operating System which hangs, if Storage device access fails. I experienced this problem under many OSs, Win, Linux, Dos-like...even RTOSes (try to access a corrupted Flash card in PharLap ETS for FieldPoint!).
   To check if drive is present, you can ping it... it's quite naive, but at least you avoid the "drive disconnected" problem... I think a ping shouldn't hang PC...
   What Hardware are you controlling? You know, some NI boards (many...) have onboard memory, and can sample independently of PC control....for a while, of course!
   I hope some guru will answer to your question (which I didn't answered, I know! ), because I'm interested too!
   Have a nice day!
graziano

Problem with CmdLineLauncher - Connection unavailable

I have problem with CmdLineLauncher. When i execute this tool by task scheduler during night, i get error message:
Launch Vars: {ExecDB=Planning...}
2011-12-18 03:31:22,674 WARN main com.hyperion.hbr.cmdlnlauncher.CmdLineLauncher - Connection unavailable Planning/...
I found explanation of this problem:
Business Rule Error
Hyperion planning services are stopped for backup procedure at night. Next step is ODI and data loading.
After data loading i need to recalculate dimensions. For now i'm using CmdLineLauncher to execute proper business rule.
If CmdLineLauncher not work, how can i recalculate dimension in other way by schedule?.
Any other solution?
Pete

Well if it is working now then it is probably down to the fact that a successful login into planning has to happen first.
There are probably a number of different options to try, maybe use one of the other planning utilities first before the command line launcher, or a script that logs into planning.
You could also try transferring the script to a calc script and then use Maxl to run it.
Cheers
John
http://john-goodwin.blogspot.com/

Nokia N8 says "conn. failed conn. unavailable" eve...

My Nokia N8 says "conn. failed conn. unavailable" twice in popup like baloon every one or two minutes and this happens after and before usb connection also.
It takes a big resource and I cannot watch video, capture video/voice and even type an SMS because everytime it appears phone stops responding to my touches and this is absolutely annoying.
I tried these ways to solve it :
1) connected the phone to Nokia configuration tool to manage/delete every single access points
2) tried to install newer Ovi support software but the Ovi suite says it is up to date
3) tried to uninstall the Ovi and Ovi store apps on my phone but I get "removing cancelled", it seems they're built in !!!
4) I read every posts about rebooting in offline and rebooting without sim card
5) I changed the connection settings to "always ask"
but unfortunately no success
I know how to reset my phone via 3buttons and *#7370# code but I'm not gonna do it for every error I get in new Symbian^3 because I have plenty of softwares and I don't have much time to install and configure them
Somebody please help me to handle this error which is really really bothering me.
Thanks in advance
Solved!
Go to Solution.

I have just bought a N8 and I had the same problem... I solved it by going to settings/ connectivity/ settings/ network destinations and deleting all the access points from each connection folder (do this by pressing on the connection folder, for example 'internet' then delete the destinations by holding your finger down on them til the menu appears then select delete) I deleted the whole lot, then sent a text to my mobile network (o2) to resend me the net settings, I saved them from the text and when I went back to the destinations list (as above) I found the phone had put the settings from o2 into another destination folder called 'uncategorised'. I think the problem with symbian is that it was causing the destinations in the 'internet' folder to conflict with the destinations in 'uncategorised', so because I had erased the settings from 'internet'', all I had to do was move the destinations from 'uncategorised' to 'internet', which means the uncategorised folder had to be deleted, but now because my phone is doing everything from just the 'internet' folder, theres no confusion, and I havent had that 'connection error' message since

N8 "conn. failed conn. unavailable"

Hi I have a problem with my N8 O2 UK Gray, latest SW (14.002)
I had faulty flash and had it repired via nokia tech support.
Letter says they've fixed flash and reinstalled software.
When I received the phone first thing was updating few apps, including Ovi Store. At that point it all seemed ok, even though Ovi wouldnt update due to some error, but it did go online and downloaded data. Next thing was restoring all backup data, and from this point my N8 wouldnt go online no matter which connection I used, either cellular network and wifi. Just after starting connection popup b'loon says "conn. failed conn. unavailable" and does this to all access points I have stored.
I have tried both soft & hard reset (may even be 10 times so far), reinstalling software using NSU and Ovi Suite and still getting nowhere. To my knowledge only thing left is "Three Fingerz" method, but dont think its gonna help and I dont want to wipe half of programs preinstalled...
Anyone had similar problem? I have repair booked already, but Im afraid its gonna be sending the phone away again and again (when I restore backup again).
Plz help

Hi I have a similar prob with my E7. Seems to be common. There should be access points in the INTERNET section. Some software is trying to connect to internet
Go to - MENU-SETTINGS-CONNECTIVITY-SETTINGS-DESTINATIONS. and inside DESTINATIONS you will see INTERNET. Create access point in this INTERNET folder. For me its working fine.

Get_ldapmessage_controls failed: 12 (Unavailable critical extension) (op=Ab

I'm running iPlanet Directory Server 5.1 SP3. I have a W2K consumer and a HPUNIX 11.0 supplier/hub. I keep getting this message in the W2K instance's error's log. Replication is not in sync.
In the Supplier hub's errors log I"m getting the following error:
[13/Jun/2005:02:21:15 -0400] - synchronize(repl_bind error)
[13/Jun/2005:10:57:27 -0400] - Error: repl_bind: slapd_SSL_client_bind_s failed: Can't contact LDAP server (81) err 0
Could someone please point me in the right direction on this? BTW, I work for an enormous corporation that moves real slow, so please don't come back to me with, "well, have you thought about upgrading to SP4 or SunOne 5.2?" I swear if I hear that again I'm going to go insane.
I have no say on what we run around here. I'm only an administrator in training.
Thanks.

Sorry, this is the full error I'm getting on the W2K box.
get_ldapmessage_controls failed: 12 (Unavailable critical extension) (op=Abandon)

Agent Connection unavailable

I have a test 10g r2 server on a RHEL3 box. This morning when I login in, either by sys or a DBA user, the status of Agent Connection was down, but the instance was open and listener was OK. So I dbshut and dbstart the db and stop/start the dbconsole. then the status is OK again. Does anyone know why? checked some log and trc files , indicating that error in uploadXMLFiles.
Chi

I cut off from Last Friday before I left the office till the time I correct the problem
2006-08-04 09:52:06 Thread-31075248 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.
2006-08-04 09:53:07 Thread-106531760 ERROR util.files: nmeufile_getLength: Error in lfilen. Error = 2 (No such file or directory)
2006-08-05 09:52:49 Thread-124844976 ERROR util.files: nmeufile_getLength: Error in lfilen. Error = 2 (No such file or directory)
2006-08-06 09:52:49 Thread-26266544 ERROR util.files: nmeufile_getLength: Error in lfilen. Error = 2 (No such file or directory)
2006-08-07 09:52:48 Thread-34225072 ERROR util.files: nmeufile_getLength: Error in lfilen. Error = 2 (No such file or directory)
2006-08-07 11:30:11 Thread-76245936 ERROR vpxoci: Error on dequeue from SYS.ALERT_QUE: ORA-01089: immediate shutdown in progress - no operations are permitted
2006-08-07 11:30:12 Thread-76245936 ERROR vpxoci: Error on dequeue from SYS.ALERT_QUE: ORA-03114: not connected to ORACLE
2006-08-07 11:30:12 Thread-76245936 WARN vpxoci: OCI Error -- ErrorCode(12528): ORA-12528: TNS:listener: all appropriate instances are blocking new connections
SQL = " OCIServerAttach"...
LOGIN = dbsnmp/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=BAANBACKUP)(PORT=1521))(CONNECT_DATA=(SID=baanbackup)))
2006-08-07 11:30:12 Thread-76245936 ERROR vpxoci: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
2006-08-07 11:30:28 Thread-76245936 WARN vpxoci: OCI Error -- ErrorCode(12505): ORA-12505: TNS:listener does not currently know of SID given in connect descriptor
SQL = " OCIServerAttach"...
LOGIN = dbsnmp/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=BAANBACKUP)(PORT=1521))(CONNECT_DATA=(SID=baanbackup)))
2006-08-07 11:30:28 Thread-76245936 ERROR vpxoci: ORA-12505: TNS:listener does not currently know of SID given in connect descriptor

Connection unavailable (in France)

Salut.
I can't connect ichat in France.
Can anyone help me?
I'm using Neuf Telecome in Angers in France.
Not only ichat, i can't connect mac msn, limewire.. etc
Does anyone have any ideas what i can do with my macbook?
Merci beucoup!

I would start here as you have told us very little information
http://discussions.apple.com/thread.jspa?threadID=527902
I see Neuf have links to AOL so I can not see it being a port problem with the SIP connection.
(It might explain the MSN issue though)
7:08 PM Sunday; December 2, 2007

CCK & iPad2 FAIL - (Accessory Unavailable-The attached accessory uses too much power)

Well, I'm not too impressed right now.
Picked up my new Camera Connection Kit (CCK) tonight and received the error message (see post title) on every camera I tried it on.
DCMI folders located in root.
Latest update (5.1)
This is with direct to camera connections.
Cameras all use micro SD cards, which CCK claims are comparable.
Some cameras use fully charges lithium batteries, others standard AA rechargables.
I'll buy a micro SD to SD converter if I have to, but the whole idea if geting the CCK was to have the photos transfer from camera to iPad with little hassle.
I'm away from home and without my laptop, so an out of the box working solution would have Been ideal.
Please reply ONLY if you've have a similar problem, or know the solution. Wishful thoughts of exploring further only clutter the topic.
Thanks in advance.
Cache Slinger

Perhaps if you stated the models of cameras. From what I've read if you're connecting the cameras to the CCK, there are sometimes settings on the cameras you need to change to make it work.
I always use mine just with the SD card - saves my camera battery - and I've not had an issue.

How to Disable "Connection Failed Connection Unava...

Ok I have a 808 bought it as a camera
after it updated it, I get this unacceptable repeated popup
"Connection Failed
Connection Unavailable"
Its like every 30 seconds
Its total black background message occupies valuable screen real estate at the top of the screen and repeatedly hinders normal usage of the device, causing especially unpleasant experience when capturing pictures or video.
How do nokia users like me go about disabling this message and continue enjoying the experience of the brand we choose to trust?

As someone who uses an 808 as my main phone on a daily basis due to it's fantastic quick and efficient OS, battery life, call quality, sat nav and great media experience it is beyond me why anyone would waste a huge amount of money just to use it as a camera !! However , if you go to settings then profiles and select offline mode, the phone will not attempt to connect to anything.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Nokia C7 - Three Network - Connection Failed - Cer...

Hi there Guys...
Recently updated my Nokia C7 to latest version of Nokia Belle (111.030.0609), Im on the Three UK network and noticed some issues with certain app and the latest versional to Nokia Social, updated from Nokia Suite.
The problem seems to effect apps that have a widget that can be displayed on the Home Screens... I have similar issues with a number of other apps like Accuweather, National Geographic and Sky Sports... I am sure there are more, but have removed them from my phone.
I just get "Failed Conections" or "Connection Unavailable" and the app will not load or open. Just to confirm I have tried been connected to my Wi-Fi and just using the internet signal from Three. I have a perfect signal and can use other apps over the internet without an issue, but the moment I open the above mentioned apps I just get the error and the apps are un-useable.
If I use Nokia Social that came with Belle and not update it, this seems to work, but the other apps don't.
Is this an issue just effecting Nokia C7's locked to the Three UK network (with its firmware) or other users too?
Does anyone know how to over come this?
I have tried re-installing the firmware numerous times, resetting and reverting back to factor settings and delting all data.
I have emailed Nokia Support and they haven't been very helpful, just telling me to do the above and will not confirm if there is an issue with this phone on the three network. They have then told me to visit a Nokia Support Centre, but this not an option, as I purchased the phone off eBay and the seller does not have the receipts to provide the Centre with proof of purchase.

I have this same problem, all was working fine until I updated things. Has anyone found a solution for this, I also reinstalled my phone back to basics and basically had nothing on it, still hasn't fixed the problem. I have tried using wifi, Three's mobile data etc to connect, and nothing. As previous person, I can connected to the internet through other apps and the web icon but not social AT ALL.
C'mon Nokia, sort it out!!

Connection failed ... Connection unavailable

Similar Messages

Maybe you are looking for