"connection failed" for Win7

My fresh-out-of-box MBA's Finder sees all the Windows machines on my network. I set username/password for a "registered user" for all of the Vista machines and for the WHS machine using "Connect As" and these operate as expected.
Despite showing the Win7 machine, clicking "Connect As" never gets to the authentication dialog. It just immediately pops a "Connection failed There was an error connecting to the server...check the server name or ip address... OK" error. It must have been a good server name/ip address as OS X found it on the network and told me about it not the other way around. Tried creating a new share on the Win7 side that was shared to everyone but still never get far enough to see any shared folders from the Win7 machine.
I find lots of other threads on the 'net about Win7 Connection Failed but these always seem to treat this as a network conenctivity problem not an authentication problem. Along with offering the server name up in the first place, the MAc pings the Win7 machine just fine. The Vista clients work fine with the Win7 shares.
Any help would be greatly appreciated.

Defining the proper Workgroup on the Mac, which didn't matter for mounting any non-Win7 machine mattered for mounting the Win7 machine. This was entirely counterintuitive since Workgroup has become about completely irrelevant in Win7. Go figure.

Similar Messages

Test connection failed for resource(s): AD: == No route to host\n

Hi, First of all I would like to tell you that the application was running fine few days back, this issue has come suddenly.
I am getting following error while doing connection test for AD with SUN IDM:
Test connection failed for resource(s): AD: ==> No route to host\n
and when I try to open the detail for windows active directory arrow mark from the resource tab, Its giving me below error:
Error iterating over objects ==> com.waveset.util.WavesetException: ==>java.net.NoRouteToHostException: No route to host
I tried to google on this but all are pointing to some network/firewall problem.
Can anybody suggest me the correction ways to resolve this problem. Any idea how I can proceed further.
Thanks,
Jimmy

First of all, I dont know if you even done the proper fault elimination
No route to host is indicative of a network problem that could be based on several different faults.
Simplest way to check, log in to the system running your IdM.
first check if your nameservice is working
nslookup <your fully qualified hostname for the AD gateway>
idmmgr@unix103a:$ nslookup idm-gw.company.com
Server:         139.188.2.1
Address:        139.188.2.1#53
idm-gw.company.com canonical name = win050a.company.com.
Name:   win050a.company.com
Address: 171.39.88.145if you get the right response there
try pinging the returned address
idmmgr@unix103a:$ ping 171.39.88.145
171.39.88.145 is aliveIf you have a routing problem it will probably show above...
if the route to the gateway works, it might be the gateway that cant talk to the AD
Just follow the track manually and if it stops working from one point, go past that point (if you can) and see if it works beyond it.
Either way, whatever resource is pointed out in the connectinfo in the pertinent adaptor or connector should work from the prompt of the system running it, if not, then you can start unraveling it from there.

Test Connection fails for VC system of type Web Service

Hi All
I ve created a VC system of the type Web Service in Portal. In this VC system, I have given Url of the Enterprise Service that I want to use in VC.
(for eg: http://erp.esworkplace.sap.com/sap/bc/srt/wsdl/sdef_ECC_SALESORDER002QR/wsdl11/ws_policy/document?sap-client=800)
In the next step, I did user mapping for the VC user that will be consuming this Enterprise Service.
The system was created successfully but when I did Connection Tests , I got the following exception:
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Do I need to do any more configurations before I can use such ES portal system in my VC work studio ?
I understand that I have provided little information about the exception thrown by Portal.
I kindly request you to feel free in asking any other details about the same.
Regards
Kapil S Kamble

Hi Natty
thanks for your immediate reply.
I followed your instructions and created iView of the type URL and set the fetch mode property to 'server side' as told.
Initially, I gave 'http://www.sap.com' as the Url and I was successful in opening the site.
Later, when I gave Enterprise Service url and tried to preview the iView, I got the following exception:
*'http://erp.esworkplace.sap.com/sap/bc/srt/wsdl/sdef_ECC_SALESORDER002QR/wsdl11/ws_policy/document?sap-client=800
Error # 401'*
I ll need to give username and password. But how do i give them as parameters?
Please note, these parameteres are appended to the Url. So, I fear that if url of Enterprise service is changed, then it wont open.
what do you think ?
Kapil

IDM Demo always reports connection failed for Solaris target

I'm setting up the IDM Demo, using the Setup Wizard, using a Solaris 10 container as
the target system. For this demo, I'm using telnet directly as root, which seems to be
the only method available. This succeeds when I run telnet by hand from the IDM host
to the target host. When I test the connection from the wizard, after a long delay, it
always reports that the test connection failed. However, the console log on the target
system shows a successful login. The Details button says that it was looking for `_.)#+(:',
regardless of what I specify as the `Login Prompt'. (I assume this really means the shell
prompt.) I've tried changing the shell prompt by setting PS1 in /.profile and tried suppressing
the banner by creating a /.hushlogin file. Still, the test button always reports that the
connection failed. What's wrong here?

ah, familiar territory :)
the string _.)#+(: is something that the adapter uses as a suffix to check whether the previous command executed has changed state or not. The assumption being that _.)#+(: will not be encountered as output of any command on Solaris.
1. Try connecting as root
2. Whats your IDM version?
3. Try this: login as root over putty, and paste whatever strings you get into the adapter configuration page on IM (for say, prompt, etc.)
4. Tracing the following variables can give you better details regarding where its getting stuck:
com.waveset.adapter.SolarisResourceAdapter
com.waveset.adapter.SVIDResourceAdapter
com.waveset.adapter.ScriptedConnection
Hope this helps!
Ankush

Portal Test Connection Failed for JDBC Connector

Hi,
We are trying to create a JDBC system in EP to connect SQL Server 2005 database. Our aim is to build a model in VC using data services from SQL Server 2005.
We deployed the Driver file sqljdbc.jar and connection was successful when tested by creating a data source in Visual Administrator-> JDBC Connector
We have created a system in EP with user mapping type (admin,user) and user mapping also done for system alias with the SQL Server administrator user id and password. UME is maintained in ABAP Stack. When we try for test connection with the system created in EP for JDBC connection, the system throws an error message like Connection failed. Make sure user mapping is set correctly and all connection properties are correct
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back end application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
The following are the URL and driver class name:
URL: jdbc:sqlserver://<host_name>:1433;DatabaseName=db_ name
Driver class name: com.microsoft.sqlserver.jdbc.SQLServerDriver
Is there any other setting to be maintained in the Visual Administrator or in the Portal?
Kindly let us know any clue to overcome this issue.
Quick response highly appreciated.
Regards
Saravanan.r

Hi Saravanan and Sathish,
not sure how far you got with this. I had the same problem or at least a very similar one with access to MS SQL Server 2005 and solved it. I followed essentially very similar steps with a couple of minor twists:
1) copied the sqljdbc.jar file to the storyboard server and set the classpath environment variable to point to it.
2) I did not create a data source, just created a new driver "SQLServer".
3) Under Connector Container I cloned SDK_JDBC as "SDK_SSQL".
4) The Visual Composer property vc.bi.sqlEditor Enabled should be set to true for you to be able the SQL Editor in the Data Service in VC.
In the portal I created a system of type BI_JDBC from a template.
The connection url and driver class were as in the thread:
URL: jdbc:sqlserver:ipaddress:1433;DatabaseName=name
Driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
ConnectionFActoryClass as above under 3.
User rights: admin,user
The user mapping to the system alias should be as described.
This should allow you to use the data service in VC to access SQL Server tables. If access to stored procedures (sometimes quite useful) is required, this would need to utilise the p9sqlserver.jar file already on the server.
Best Regards
Felix Logemann

Bonjour Connections Fail For One user

Our Mac is connected to a wireless network with some other Windows computers using Bonjour. I set up the connection a few years ago (that was on another Mac but I used the migration assistant to transfer everything without any hitches). Now the connection from my wife's account on the Mac to the Bonjour drives will not work, and I cannot figure out why. The computers show up in my wife's sidebar when "Bonjour computers" is checked in the sidebar preferences. But when you click on any of them the connection fails, and the only error message is "Connection failed." There is no other information. If you click "Connect As," nothing happens. No new error message, no connection, no dialogue box, nothing.
I checked the Network, Sharing, and Security settings in the System Preferences, and could not find anything different in my wife's account, although it is possible I'm missing something.
I tried the "Connect to Server" method in Finder and that also fails.
In my account, and at least one other, clicking on the servers in the sidebar connects automatically, so the problem is only in this account, but I am at a loss how to fix it.

Any information about my issue?

Hybrid Connection fails for Windows SQL Server 2014 - SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted

Hello,
I have configured BizTalk Services Hybrid Connection between Standard Azure Website and SQL Server 2014 on premise.
Azure Management portal shows the status of Hybrid Connection as established.
However, the website throws an error when trying to open a connection
<
addname="DefaultConnection"
connectionString="Data
Source=machine name;initial catalog=AdventureWorks2012;Uid=demouser;Password=[my password];MultipleActiveResultSets=True"
providerName="System.Data.SqlClient"
/>
(The same website, with the same connection string deployed on SQL Server machine works correctly).
I tried various options with the connections sting (IP address instead of machine name, Trusted_Connection=False, Encrypt=False, etc. the result is the same
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.
I tried various machines - on premise and a clean Azure VM with SQL Server and it results in the same error - below full stack
The certificate chain was issued by an authority that is not trusted
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ComponentModel.Win32Exception: The certificate chain was issued by an authority that is not trusted
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) +5341687
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) +546
System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock) +5348371
System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate) +91
System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate) +331
System.Data.SqlClient.TdsParser.TdsLogin(SqlLogin rec, FeatureExtension requestedFeatures, SessionData recoverySessionData) +2109
System.Data.SqlClient.SqlInternalConnectionTds.Login(ServerInfo server, TimeoutTimer timeout, String newPassword, SecureString newSecurePassword) +347
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover) +238
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout) +892
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance) +311
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData) +646
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) +278
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) +38
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +732
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +85
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) +1057
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +78
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection) +196
System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +146
System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +16
System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry) +94
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) +110
System.Data.SqlClient.SqlConnection.Open() +96
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +44
[EntityException: The underlying provider failed on Open.]
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +203
System.Data.EntityClient.EntityConnection.Open() +104
System.Data.Objects.ObjectContext.EnsureConnection() +75
System.Data.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption) +41
System.Data.Objects.ObjectQuery`1.System.Collections.Generic.IEnumerable<T>.GetEnumerator() +36
System.Collections.Generic.List`1..ctor(IEnumerable`1 collection) +369
System.Linq.Enumerable.ToList(IEnumerable`1 source) +58
CloudShop.Services.ProductsRepository.GetProducts() +216
CloudShop.Controllers.HomeController.Search(String SearchCriteria) +81
CloudShop.Controllers.HomeController.Index() +1130
lambda_method(Closure , ControllerBase , Object[] ) +62
System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters) +14
System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters) +193
System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters) +27
System.Web.Mvc.Async.<>c__DisplayClass42.<BeginInvokeSynchronousActionMethod>b__41() +28
System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethod(IAsyncResult asyncResult) +32
System.Web.Mvc.Async.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33() +58
System.Web.Mvc.Async.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49() +225
System.Web.Mvc.Async.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethodWithFilters(IAsyncResult asyncResult) +34
System.Web.Mvc.Async.<>c__DisplayClass2a.<BeginInvokeAction>b__20() +23
System.Web.Mvc.Async.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult) +99
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeAction(IAsyncResult asyncResult) +27
System.Web.Mvc.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult) +14
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult) +39
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecute(IAsyncResult asyncResult) +29
System.Web.Mvc.Controller.System.Web.Mvc.Async.IAsyncController.EndExecute(IAsyncResult asyncResult) +10
System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult) +25
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +31
System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +9
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +9651188
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.36213
Regards,
Michal
Michal Morciniec

Same issue here, looking for more information !

WPA/WPA2 secured wireless connection fails for two minurtes for every hour of use.

Hello.
I have a brand new ThinkPad T500 2055-A16 with Windows Vista Business. I have a WiFi connection problem. It is not a signal strength problem, as it doesn't work even if I place the computer right next to the access point with no other wireless equipment near by.
None of my other computers experience this problem. I even bought another ThinkPad T500 2055-A16 at the same time as this one, and that does not have the problem either. The problem is when I connect to a network using WPA2-PSK or WPA-PSK. The connection works fine for half an hour, an hour or two hours, but then without warning, the connection is lost and it is not possible to reconnect for half a minute, a minute or two minutes. The exact times vary. When I switch the network to use WEP or no encryption, everything works fine. But I don't like to use no encryption and I cannot use WEP because I have other computers in my home which does not support WEP.
I had this problem right from the beginning the first time I used the computer. I have tried many things like disabling power management or IPv6 and other things suggested by my ISP, but it did not change anything, so I switched them back to their default value. I have also tried to update the driver for the Intel(R) WiFi Link 5100 AGN card, but that didn't help the problem. The problem became slightly less annoying when I uninstalled Access Connections, because Vista would then reconnect as soon as it could, whereas I in Access Connections would have to continuously press the connect button until it succeeded. But the problem is still a real pain.
Some pieces from the Windows Event Viewer, which I think looks interesting (these occur regularly at exactly the same timestamps as when the connection is lost):
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Fail
0x00048005 and 0x0003800b
Result of diagnosis: Problem found
Issue referred to: L2Sec Helper Class
I also see the following message on my access point's log, which also occur at exactly the times when the connection is lost:
1x:00216b4d7ee6:logout
(The number match the MAC address of my computer)
The only other message which is logged on my Access Point when all log options are enabled is "Time initialized by NTP server".
How can I solve this problem so that I can have undisrupted wireless Internet access?

Edit: Actually my other ThinkPad T500 2055-A16 also fails in the same way, but my ThinkPad SL500 2746-9BG and my Medion laptops works fine, also running Vista.

Jdeveloper 10.1.3.4 Test Connection failed for BPEL Process Manager.

Application Server: OK
BPEL Process Manager Server: FAILED
ESB Server: OK
Verified and tried below steps:
1. hw_services and orabpel and deploy_services are up and running
2. Jdeveloper and Oracle SOA Suite Version is 10.1.3.4
3. Tools->Preferences -> Web Browser and Proxy is disabled.
4. Restarted hw_services and orabpel via Application server control for OC4J_SOA > hw_services/orabpel
5. Able to connect the bpel process manager(BPELConsole) from Browser.
6. But Not able deploy using ant tool as well as with Jdev Deploy option(no domains are displayed under deploy option in Jdev)
7. Ant deployment throws error,
A problem occured while connecting to server "testinstance.com" using port "7777": <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<HTML><HEAD>
<TITLE>404 Not Found</TITLE>
</HEAD><BODY>
<H1>Not Found</H1>
The requested URL /integration/services/deploy/deployHttpClientProcess.jsp was not found on this server.<P>
<HR>
<ADDRESS>Oracle-Application-Server-10g/10.1.3.4.0 Oracle-HTTP-Server Server at testsoa.art.com Port 7777</ADDRESS>
</BODY></HTML>
Went thru many threads under soa/bpel forums and couldn't find it worked.
Appreciate your help

Application Server Test     Passed
BPEL Identity Service     Failed
BPEL Domains     Not Run
BPEL Server Mode      Not Run
BPEL Notification Service     Not Run
BPEL TaskManager Service     Not Run
ESB Connection     Passed
When I select "BPEL Identity Service     Failed" the error displayed as is below. But for the Not Run components it says "Not Executed".
java.lang.Exception:Exception not handled by the Collaxa Cube system.
An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "ORABPEL-10555
Identity Service Configuration error.
Identity Service Configuration file has error.
     at oracle.tip.pc.services.identity.config.ISConfiguration.load(ISConfiguration.java:277)
     at oracle.tip.pc.services.identity.config.ISConfiguration.<clinit>(ISConfiguration.java:94)
     at oracle.bpel.services.workflow.task.impl.WorkflowUtil.setUserNameCaseSensitiveFlagOnServer(WorkflowUtil.java:1193)
     at oracle.bpel.services.workflow.task.impl.TaskService.<init>(TaskService.java:196)
     at oracle.bpel.services.workflow.task.impl.TaskService.<clinit>(TaskService.java:153)
     at oracle.bpel.services.common.InitializeServlet.init(InitializeServlet.java:56)
     at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
     at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4830)
     at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4754)
     at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4942)
     at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1144)
     at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:741)
     at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:431)
     at com.evermind.server.Application.getHttpApplication(Application.java:586)
     at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1987)
     at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1906)
     at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:643)
     at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
     at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
     at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
     at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2493)
     at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1042)
     at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
     at java.lang.Thread.run(Thread.java:595)
Caused by: oracle.xml.parser.v2.XMLParseException: Start of root element expected.
     at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:320)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:341)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:291)
     at oracle.tip.pc.services.identity.config.ISConfiguration.parseDocument(ISConfiguration.java:339)
     at oracle.tip.pc.services.identity.config.ISConfiguration.load(ISConfiguration.java:259)
     ... 23 more
Exception: ORABPEL-10555
Identity Service Configuration error.
Identity Service Configuration file has error.
Handled As: oracle.tip.pc.infra.exception.PCRuntimeException

SQL Connection Failed for SCCM 2012 R2 (Unable to load user-specified certificate)

We've recently completed an upgrade from SCCM 2012 SP1 to 2012 R2 and have been running in the new environment for about a week. As of this morning, The consoles failed to connect to the CAS' and one of the Primary Site's database. The issue was resolved
easily enough by addressing a certificate issue in SQL, but I'm left wondering if there's a correlation between the SP1-to-R2 upgrade that would cause the cert to fail. Anyone have experience with this?
2014-01-21 22:10:11.81 Server      The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
2014-01-21 22:10:11.81 Server      Error: 26014, Severity: 16, State: 1.
2014-01-21 22:10:11.81 Server      Unable to load user-specified certificate [Cert Hash(sha1) "haaaaassssshhhh"]. The server will not accept a connection. You should verify that the certificate is correctly installed. See
"Configuring Certificate for Use by SSL" in Books Online.
2014-01-21 22:10:11.81 Server      Error: 17182, Severity: 16, State: 1.
2014-01-21 22:10:11.81 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-01-21 22:10:11.81 Server      Error: 17182, Severity: 16, State: 1.
2014-01-21 22:10:11.81 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-01-21 22:10:11.81 Server      Error: 17826, Severity: 18, State: 3.
2014-01-21 22:10:11.81 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-01-21 22:10:11.81 Server      Error: 17120, Severity: 16, State: 1.
2014-01-21 22:10:11.81 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.

We got the same certificate related error events after a fresh install of SCCM 2012 R2 on a new server. It happened during the first reboot after SCCM was installed. In the Certificates mmc, I right-clicked on the certificate used by SQL and chose Manage
Private Keys. Giving the service account that runs the MSSQLSERVER service read rights to the private key allowed SQL to start. However, after a day or so we rebooted the server again, and SQL wouldn't start. Something had removed the service account's read
permission. Since the SCCM configuration wasn't that far along, we uninstalled SCCM. After giving the service account read rights again, and rebooting several times over a few days, and SQL started every time. We then installed SCCM 2012 R2 again, and checked
the certificate's permissions before rebooting. The service account still had read permissions when the install completed, but as soon as the server was rebooted, it lost the permissions again.
The Certificates mmc was then used to request a second computer certificate and then SQL was configured to use that new certificate via SQL Server Configuration Manager. After several days and a number of reboots the SQL services have started normally every
time so the second certificate seems to have fixed the issue. I have kept the original certificate for fear that removing it will cause whatever part of SCCM 2012 R2 that modifies the original certificate to start removing permissions from the new certificate
as well.

Denim update and connection fail for microsoft web services

Denim update loaded recently to my Lumia 1020 but fail connection to Microsoft account and web services as well as to Nokia account. Fail code is 502;
Server Error 502 - Web server received an invalid response while acting as a gateway or proxy server.

It might have not propagated to all servers yet and there are some reports that possible those in the Preview for Developers Program are getting BSOD updating, The Denim update for my Lumia Icon killed the phone
Give it some time and see if the update gets to you or not.
Using the recovery tool will wipe your phone to factory defaults. If you are fine with losing all your data and restoring, sure go with that.http://www.windowscentral.com/denim-update-lumia-icon-software-recovery-tool

FaceTime connecting fails for international use only

I have always been able to FaceTime locally and internationally. Now it seems international FaceTime use, both incoming and outgoing fails. Connection is fine on local numbers. How can the international connection be solved?

Hello tanyafromjohannesburg
If you are having issues with making FaceTime calls, then check out the article below. You will also want to send this to the person that you are trying to FaceTime because the issue could be on their device.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Regards,
-Norm G.

The connection was reset + Secure connection failed

Hello, I am using firefox on the web and I keep encountering the same error message that the connection was reset when I try to access webpages. Following the article at https://support.mozilla.org/en-US/questions/1024256 did not solve the problem as it only fixed it for google.com and no other website, however when I hold down shift and reload the page it will reload, sometimes in basic html. Operating in safe mode will bring up these pages in basic text without graphics.
Sometimes, it will instead show the message Secure Connection Failed for trusted websites such as news agencies.
I have disabled my themes and add-ons but the problem still persists.
I woud like some guidance on how to go about fixing this problem. Thanks! :)

Check the date and time and time zone in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
Check out why the site is untrusted and click "Technical Details" to expand this section.
If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the <b>issuer of the certificate</b>.
You can see more Details like intermediate certificates that are used in the Details pane.
If <b>"I Understand the Risks"</b> is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
*Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.
*Note that it is not recommended to add a permanent exception in cases like this, so only use it to inspect the certificate.
Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection

"[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
After patches applied on patch Tuesday the database reports the above error.
All accounts are domain accounts and SQLServer uses Windows auth.
DCDIAG show no errors
All servers and DC have been restarted,
Message in db log confirms the connection is being denied due to trust.
Event log shows same rejection
Protocols enabled: named pipes, tcpip, memory
TESTS:
PortQry: "
TCP port 1433 (ms-sql-s service): LISTENING"
Connect with domain admin accounts works from multiple clients systems to DB.
Cannot connect with newly created domain admin account
Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
New standard user also fails to connect.
NOTES:
I removed the SSL patch and the IE security update to see if that was an issue.
¯\_(ツ)_/¯

Has someone left the company or has an account of some nature been dropped/replaced?
Please click "Mark As Answer" if my post helped. Tony C.
Hi Tony,
Srry but No. We just installed the monthly updates.
I went back and found I had missed removing a patch. I missed the rollup for Windows Server 2003:
Event Type: Information
Event Source: NtServicePack
Event Category: None
Event ID: 4382
Date:  3/12/2015
Time:  12:26:04 PM
User:  NETTEST\admin
Computer: DATA1
Description:
Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
After I removed that is still didn't work but after about five minutes it started working.
I guess I ned to report that to MS after I research what might be changed to make the patch work.
Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
Thanks for replying.
Well - maybe this will help someone else.
Thanks again for replying Tony
¯\_(ツ)_/¯

How do I set the "When an OCSP server connection fails, treat the certificate as invalid" in Firefox for Android?

Due to the security concerns from Heartbleed and Steve Gibson's excellent coverage on certification revocation, I have set "When an OCSP server connection fails, treat the certificate as invalid" on my desktop Firefox and now want to do the same on Firefox for Android. I cannot find anything in the settings menu to allow this. Is it done through about:config and if so, what is the setting name there?

hello mcvickerp, in about:config you can switch the setting "security.OCSP.require" to true.

"connection failed" for Win7

Similar Messages

Maybe you are looking for