"Connection Failed" WEP Error

Hey guys,
I was using the internet on my ethernet, when all of a sudden it stopped working. I tried unplugging and replugging and yet, nothing. I turn on Airport, it locates my wireless connection, so I click on it and it says "Connection Failed".
I try again, this time it asks for me WEP password. I input it, but yet again it says "Connection Failed". And now I can't figure out how to run it again.
Just a bit about my setup:
I have a Motorola Wireless modem given my Testra (ISP).. which goes on to a D Link Router that splits into 4 rooms in my house. I can use the Wireless from the Motorola and the ethernet from the D Link. Now suddenly, at the same time, both have stopped working for me. However, if I connect my ethernet wire directly with my Motorola, it works fine. But I can't use Motorola's Wireless because even though Airport can locate the network, when I select it it asks for the WEP password, and when I submit it says Connection Failed.
I hope that made sense. I was wondering if anyone has faced similar problems and knows what to do? I spoke to tech support and they said it had something to do with the encryption of WEP which is apparently not compatible with mac? But that doesn't explain why my modem worked fine for 6-7 months I've had it.
Would appreciate any answers.
Thanks guys

Howdy
This just happened to me today- I have a two year old AEBS that was working fine with 2 Powerbooks, a Mac Mini, a MacBook, and an iPhone until today....I can see from the iPhone that the signal is extremely low, but it is there, and yet I cannot log in from any computer...I am going to try disabling the WEP to see if it makesa difference but I may have to bite the bullet and get a new AP...my whole family is screaming at me.... god forbid they can't get on the internet for a few hours
In any case, love to hear any suggestions..
Thanks!

Similar Messages

I receive an error in Firefox 4.0 Beta 11: Secure Connection Failed An error occurred during a connection. Renegotiation is not allowed on this SSL socket. (Error code: ssl_error_renegotiation_not_allowed) Anyone know how to fix this?

I have installed the Firefox 4.0 Beta 11 (+updates), I try to connect to our https: website and I receive the following error:
Secure Connection Failed An error occurred during a connection.
Renegotiation is not allowed on this SSL socket.
(Error code: ssl_error_renegotiation_not_allowed)
I have installed this certificate on Firefox 3.6.13 and I am able to connect to our HTTPS site but it will not work with the Beta 4.0 11

I read about this for ages. I had problems setting up a certificate for my online banking. This one solution genuinely worked for me (finally!) ...Fingers crossed it will for you too:
1) In the address bar type in '''about:config''' ...Firefox will say it's dangerous, but I just went ahead anyway lol - It's fine. Thank god there's always an edit-undo!
2) Copy and paste this into the ''filter'' at the top: '''security.ssl.allow_unrestricted_renego_everywhere'''
3) Then change ''false'' to ''true'' (I think I just clicked it, and it changed)
That's it! Refresh your bank page, and it should work!
(Spanish source: '''http://translate.google.com/translate?sl=es&tl=en&js=n&prev=_t&hl=en&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2Fwww.fedora-ve.org%2F2011%2F09%2F14%2Ferror-error-code-ssl_error_renegotiation_not_allowed-en-firefox-4-x.html&act=url''')

Connection failed: 18456 error

When one of my users creates an ODBC connection to a SQL database using Windows authentication, he gets this error:
Connection failed: SQLState: '28000' SQL Server Error: 18456
[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user
'Domain\username'
The thing is, the 'Domain\username' is not his username and I have no idea where or why it is trying to use that username.
Ideas?

Hi Mike,
If I read your post correctly, your intention is to use Windows auth, correct? If so, then make sure that you use the "Trusted_Connection=Yes" connection string attibute and remote the username and password attibutes. This will make SQL Server authenticate you based on the credentials under which your client application is running.
Further information regarding the 18456 error can be found here: http://blogs.msdn.com/sql_protocols/archive/2006/02/21/536201.aspx
Il-Sung.

Connection Failed, Native Error

A staff member is receiving a Publishing Failed message:
Connection Failed. Please check connection and post again. Native
Error: Cannot accept uploading file. Further processing is stopped.
He is using RH6. Some of the language used in the project is
portugeise. I am wondering if this might be the problem if certain
characters are used in conjunction with the language. Any
familiarity with this error message?

They are using RH 6 and server 6. They have setup the
permissions correctly. They also ran a test project, which did
publish successfully, but when they try to publish the original
project, publishing fails with the message: Native Error: Cannot
accept uploading file. Further processing is stopped.

Datasource connection failing with error "Cannot open resource"

Hi All,
I have created a datsource in VA with JDBC 1.X driver type for a SQL Server.
However, now when I try to connect to the datasource from an udf in the Message Mapping, I am getting the below error:
Error: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot open resource(Managed Connection) with LocalTransaction support or add a second one in the same transaction, for component "webContainer/applications/sap.com/TestDB/TestDB" in application "sap.com/TestDB"
I checked the SAP Help link given below where it is mentioned as a solution that the datasource should be made shareable.
http://help.sap.com/saphelp_nw04/helpdata/en/5c/2f2c4142aef623e10000000a155106/frameset.htm
In SAP Help, it mentions that datasource can be made shareable by modifying the deployment descriptor as mentioned in the link below. However, the datasource was configured in the VA and not deployed using archive. Hence, we do not have a deployment descriptor to modify and redeploy.
http://help.sap.com/saphelp_nwce10/helpdata/en/e8/47591ac2e843d09a374e88b044bda9/frameset.htm
Could you please provide pointers on how configure and make the datasource shareable.
Thanks & Regards,
Rosie Sasidharan.

Hi Rosie ,
This information is really really helpful for me . I was trying to solve this problem from last 4 days. Today i am able to solve just because of reference given by you.
Once again thank you very much

Unable to connect to website losing connection and the result is displayed as Secure Connection Failed (Error code: ssl_error_access_denied_alert)

Secure Connection Failed
An error occurred during a connection to website name
Peer received a valid certificate, but access was denied.
(Error code: ssl_error_access_denied_alert)
# The page you are trying to view can not be shown because the authenticity of the received data could not be verified.
# Please contact the web site owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.

Still experiencing this problem and hoping someone may have some ideas to try on the server.

Every time i try to load a website for my school which i know is secure a page that says secure connection failed pops up with (Error code: ssl_error_internal_error_alert) how do i get past this?

it also says : Secure Connection Failed
An error occurred during a connection to sis.granby.k12.ct.us.
Peer reports it experienced an internal error.
(Error code: ssl_error_internal_error_alert)
The page you are trying to view can not be shown because the authenticity of the received data could not be verified.

unfortunately the fiddler2 issuer in certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
 reference: https://support.mozilla.org/en-US/questions/982532#answer-520145
afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]

HTTP connection failed error

Hi experts,
 i am getting http connection failed error when i am trying to integrate backend system.
 I think i provided all the parameters correctly.
we are using integrated ITS. Can any one suggest me any think . its very urgernt .
 Points will be awarded for helpful answers.
thanks.....
rao

http://xxxx:8037/sap/bc/gui/sap/its/webgui?sap-....
ITS Host Name : xxxx:8037
ITS path: /sap/bc/gui/sap/its/webgui/
ITS protocol : http
I am getting only http test failed. And also i created one transaction iview its working fine. I am worying whether this failure may cause any problem in the future i mean for IAC iview.

Secure Connection Failed: Error code: ssl_error_illegal_parameter_alert - New problem after website moved to new server.

My website was migrated to a new cloud server last week and after the move visitors to my site using Firefox have been intermittently receiving the following error when visiting a https:// url.
Secure Connection Failed
An error occurred during a connection to www.url.com
SSL peer rejected a handshake message for unacceptable content. (Error code: ssl_error_illegal_parameter_alert)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
Upon a few refreshes the page may load again but often very slowly and often not all images will load.
The web hosts have tried many things, have had cpanel techs check the server and even set up a new ssl certificate to try and resolve the problem with no luck.
Researching the internet shows that people have faced this issue when upgrading Firefox or with certain AntiVirus software conflicts.
However I can't tell all FF visitors to start altering their config files in order to be able to visit my site.
I don't understand how I didn't have this issue prior to the migration but now something has changed that no one knows how to resolve.
For reference: I am using FF 28.0 and I am not experiencing this SSL error on any other site other than my own since the migration.
Does anyone have any information on what the web host may be able to do to fix this SSL issue that only occurs for FireFox users?
Thank you for any suggestions you may be able to offer.

Still experiencing this problem and hoping someone may have some ideas to try on the server.

Hi Guys, I have completely lost access to Gmail and all Google accounts via Firefox - error message "secure connection failed Error code: sec_error_bad_der

I have been a long time Firefox user and this is the first time I am truly baffled. Now if I try to log into gmail or any google account on my main PC I just get an error message as below.
Secure Connection Failed
An error occurred during a connection to accounts.google.com. security library: improperly formatted DER-encoded message. (Error code: sec_error_bad_der)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
I have tried reinstalling, clearing cache, clearing cookies, and just about every other thing I can think of but to no avail. I can access through IE and also via firefox on my other PCs but no joy on my main PC. Please help as this one is stumping me.
Many thanks for your help.

Sorry I forgot to add my system is Win 7 64 home premium

I've updated to FF26 and get the follow error message "Secure Connection Failed" why is that?

ever since I've updated to FF26 some of the sites won't come up and show the following error message:
Secure Connection Failed
An error occurred during a connection to www.facebook.com. SSL peer rejected a handshake message for unacceptable content. (Error code: ssl_error_illegal_parameter_alert)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
it does not happens all the time but most of the times.
this also occurs on google.com, twitter.com and many more.
what to do?

Do you have the option to turn off the feature of Kaspersky scanning your SSL traffic? Usually that can be turned off (e.g., in ESET and BitDefender).

Secure Connection Failed (Error code: sec_error_ca_cert_invalid)

Hello
I'm having troulbes accessing HP iLO with FF 36.0 on Ubuntu 14.04 LTS, getting the following error message:
====================================
Secure Connection Failed
An error occurred during a connection to 172.25.X.X. Issuer certificate is invalid. (Error code: sec_error_ca_cert_invalid)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
====================================
It seems to work with other browser such as Chromium, so the problem seems to be FF 36.0. Unfortunately, I don't have an "Add exception" button in FF that would allow me to bypass this warning.
I've already followed the following links:
https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message
https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems
But I didn't managed to get it work. Any idea how to get it fixed?

I have a better answer, upgrade to version 37 via bug 1138332

Trying to load a secure website, firefox says "Secure Connection Failed: Peer's certificate has an invalid signature."

I need to get on this website, which only allows Firefox and Safari for Mac OSX, but since I upgraded to the latest Firefox update, this is the message I get:
Secure Connection Failed
An error occurred during a connection to teleserve.dlt.ri.gov.
Peer's certificate has an invalid signature.
(Error code: sec_error_bad_signature)
Help!

The site doesn't seem to be sending the correct intermediate certificate.
You can install this VeriSign intermediate certificate that works for me.
*https://knowledge.verisign.com/support/ssl-certificates-support/index?page=content&id=AR1514

Creating new Data Source Error - Database connection Failed

Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.

Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance.

Submit Button error - Data Connection failing

I am the form designer and am currently testing a new form I have created, however there is an error with my submit button which Saves the form to SharePoint, I receive the following error message:
InfoPath cannot submit the form.
An error occurred while the form was being submitted.
The form cannot be submitted to the following location: http://servername/siteA/siteB/siteC/FormLibrary/FormName.xml
The file: http://servername/siteA/siteB/siteC/FormLibrary/FormName.xml" is checked out for editing by DOMAIN\MyUserName.
The operation completed successfully.
The form is not checked out to me, or open by anybody else, also check out functionality is not forced on this SharePoint library.
On searching forums I have read about using friendly server names and I am using the server's name in the URL, i.e.
http://servername instead of the alias
http://intranet - this had solved the problem in other forms, but not this one.
Looking closely at the rules on my submit button, the following actions occur:
1st rule checks the selection of certain fields, if the conditions are right it will set the values of 3 different fields.
The 2nd rule saves to SharePoint using a data connection (please note this data connection works fine on different submit buttons in different views). The second rule also closes the form.
To test where the error occurs I added a series of actions to display messages, and the problem is definitely on the data connection rule.
The data connection is to save to a Sharepoint library, using a field called "filename" as the file name. The data connection allows overwrites. The file name is set the first time a file is saved (it has a condition which checks a field which
gets set upon any save event - if this field is set to 0 filename gets set and this field gets set to 1 - because this field is now equal to 1, the filename field will nwever get set again).
I have 2 views on the form, one named phase 1, the other named phase 2. When the custom submit button is pressed on the phase 1 view, my data connection works, but on the save 2 view, the exact same data connection fails with the error message above.
I am using Windows 7, InfoPath 2010, SharePoint 2010, InfoPath filler form).
In Windows XP, for a different user, the error messaeg is a little different, and the form does actually save:
InfoPath cannot submit the form
An error occurred while the form was being submitted
The form cannot be submitted to the following location: http://servername/siteA/siteB/siteC/FormLibrary/FormName.xml
The file is in use by another application or user.
As I said the form does actually save its changes but still throws up this error message which will be very confusing to end users.
I've exhausted all avenues that I know of to find the cause of the error messages and I'm at a loss, please help!
Thanks,
Ben

bgvball14. I found that the error was down to the friendly name / server name issue. I have made sure that everything uses the friendly name e.g.
http://intranet instead of the servername e.g.
http://servername. I made sure the data connection and all options in the publishing wizard are set to the friendly name. There were still some forms that didn't work though - this was because when trying to fix this problem I had switched several times
between using the friendly /server names and some forms were looking for the template with the server name (these didn't work), other forms looked for the friendly name (these did work).
What I did was open my form library in windows explorer view and then drag each form into Notepad so I could see the source code. On the top two lines I could see the reference to the template and in some cases the template weas referenced using the server
aname, which I changed to the friendly name and this worked. I did have to check every form in the library. Basically, everything should reference the friendly name (e.g.
http://intranet.
Ben

"Connection Failed" WEP Error

Similar Messages

Maybe you are looking for