"Connection Failed" when trying to access TC that I have already connect to

Hello,
I have been connecting to my office network for well over a month now with no problems. Now, no matter what I do, i can not connect to the Time Capsule that provides the WiFi for the office.
The Office Network appears in the Airport drop-down list and I can select it to connect to it. However, even though I enter the password in correctly, it continually says "connection failed."
The other computers (all Macs) can connect/stay connected just fine. I have tried restarting both my computer and the entire office network several times to no avail. I have updated all software on my computer. I have removed the network from my list of preferred networks, tried to connect to it again, and I have manually "Join Other Network" all to no avail.
The same thing happened about 2 weeks ago. Just randomly, after about 3 hours of no connection, it allowed me to connect again. I can connect just fine to any other Wireless Network--Starbucks, my home Aiport Express, Apple Stores, etc... I am limited in what I can do to the Time Capsule, seeing as how it is the Office's and I am not authorized to get onto Airport Utility/change settings on the TC.
I am at my wits' end with this one.
My computer:
1.83GHz Macbook Pro
1GB RAM
80GB Hard Drive
Airport Extreme (0x168C, 0x86)
Wireless Card Firmware Version: 1.4.3.1
The Wireless Setup:
Comcast cable modem, connected to 1TB Time Capsule with latest firmware/software updates.
Thank you for any suggestions.

I am having the same problem starting today since my trusty ol' PowerMac froze up on me. I've repaired permissions and the disk.
Other devices on the network work fine with the same password, but my main machine won't connect!

Similar Messages

  • How come when I use a Internet that I have already used it doesn't automatically connect

    How come when I use an Internet that I have already used it doesn't automatically connect?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HT4157 I get "Connection Failed " when trying to access the Account.

    I cannot establish a connection when attempting to add a data account with ATT. I received the following message: "Connection Failed - The connection to the server was lost. Please try again later."
    I've been trying all day! Any suggestions?
    Thanks.
    JB

    Solution is here: https://discussions.apple.com/thread/3197723
    Go to System Preferences > Sharing > Options...
    Unshare your home folder and then you can connect. Apparently Lion shares your home folder by default.
    Worked for me.

  • TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

    i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

    Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
    Make sure the Firewall is turned off.

  • I cannot access facebook on my MacBook Pro.  I am able to access every other website.  When trying to access facebook it says that page cannot be displayed as safari cannot establish a connection.

    I cannot access facebook on my MacBook Pro.  I am able to access every other website.  When trying to access facebook it says that page cannot be displayed as safari cannot establish a connection.  I was able to access it just fine few weeks ago....
    Please help!

    Hi Justysiag,
    If you are having issues opening a particular web site in Safari on your MacBook Pro, you may want to follow the steps in this article to see if you can resolve the issue -
    Safari 7 (Mavericks): If Safari can’t open a website
    http://support.apple.com/kb/PH17169
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Is anyone getting this message when trying to access Yahoo Email?  "Cannot Get Mail, The connection to the server failed?"

    Is anyone getting this message when trying to access Yahoo Email?  "Cannot Get Mail, The connection to the server failed?"

    I have Yahoo mail (POP) account.  Mine is working fine at present.  I do occasionally get asked for password while sending mail.  I have had your issue in the past and it usually clears up in a few hours.  Sometimes I sign out and then back in and it starts working again.

  • I keep getting message that not connected to Internet when trying to access an so site such as amazon, when I can still access other areas of Internet such as banking

    Why do I keep getting message that not connected to Internet when trying to access amazon yet am very obviously am still connected as can access the apple site or banking sites. Have tried resetting.

    I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!

  • When trying to access email I get the message "Cannot get Mail - The connection to the server failed". How do I resolve this?

    When trying to access email I get the message "Cannot get Mail - The connection to the server failed". How do I resolve this?

    google your mail providers settings and go over them 1 by 1 to make sure it's set correctly in your ipads mail account settings

  • Getting a prompt when trying to access App store sating that I cannot connect to itunes store.

    Getting a prompt when trying to access App store sating that I cannot connect to itunes store.

    Try the help here >  Can't connect to the iTunes Store

  • HT2480 hi i am getting message that CANNOT GET MAIL  THE CONNECTION TO THE SERVER FAILED when trying to add official mail to Exchange in IPHONE 5

    hi i am getting message that CANNOT GET MAIL  THE CONNECTION TO THE SERVER FAILED when trying to add official mail to Exchange in IPHONE 5

    Talk to your IT department...
    Or if you're at University, talk to the computer team.
    Most Uni's are using outlook.com as the server connection not mail.youruniversity.edu

  • Both my iphone 4s and my ipad3 will not connect to the server when trying to access my email account. Why, and how do I fix it.

    Since 29/10/2012 my iphone 4s and more recently my ipad 3 will not connect to the server when trying to access my email account. All I get is an error message saying that 'cannot get mail, connection to the server failed' I hadnt changed any settings it just happened. I have since done a complete re-boot on the ipad but to no avail. Anybody got any suggestions?

    No. Everything was working fine and then it wasn't. I hadn't changed any settings or switched either one off. When the phone stopped working properly I ignored it because I always have my ipad with me but that just sopped working properly and now I am stuffed. I have tried most solutions suggested on here even wiping the ipad clean and re-booting. I did this exactly the same way as when I first got it but still no joy. The same with the phone.

  • I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. C

    I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.

    It could be that there's a new source of interference.
    Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
    http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
    By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there.

  • Fix for "Not Connected" Error Messages When Trying to Access Web Services

    If you run across an error message on your printer stating that it is "Not Connected" when trying to access ePrint or your Apps, but you know it is connected to the internet, it probably just means that the printer is not connecting to the server properly.
    Here is the first set of steps I would try, since they seem to resolve this issue half of the time.
    The first thing I would try in this situation is a network reboot.
    First, disconnect the power cord from the back of your router. 
    Next disconnect the power cord from either the back of the printer or the wall, without powering it off first. 
    Wait about 30 seconds and reconnect the power cord to your router.
    Wait about another 30 seconds and plug the printer back in. It should boot back up automatically, but if it doesn't go ahead and press the power button.
    Once everything is back up and running, try to access ePrint or your Apps.
    If those steps don't work for you, the next thing would be setting a Static IP & DNS for the printer. Before doing this, you want to print off a network configuration page. It varies from model to model, but it is usually found under the Wireless Settings or under Reports in the Setup menu. After you have that page, follow these steps.
    Before we start, we need a network configuration page with your current connection settings. To get this, press the wireless button on the front of your printer and then press "Print Info" or "Print Report". This will print off a network configuration page, which has information on it that we need to complete the next few steps.
    After you have that, we will need to access the printers Embedded Web Server (EWS). You can do so by entering the printers IP address (from the network configuration page) into your browsers address bar and pressing enter.
    Once there, press the "Network" tab at the top of the page. From there you will want to click the "IPv4" button, located on the lef-hand side of the page. It will be there for WIreless and Wired, so make sure to click the one for you however you are connected. If you do not see "IPv4", you should see "Networking", press that and then press "Network Address(IP)".
    Next, you will want to click the small round button next to "Manual IP Address" and then fill in the boxes for IP Address, Subnet Mask, and Default Gateway, using the information found on the network configuration page.  
    For the Primary or Preffered DNS Server, you will want to enter 8.8.8.8.
    For the Secondary or Alternate DNS Server, you will want to enter 8.8.4.4.
    Click apply and when the message pops up saying that the changes have been applied, press "OK". 
    Press the power button on your printer, wait for it to fully power off and then press it again to power it back on.
    After doing this, go ahead and try to enable ePrint again.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    This question was solved.
    View Solution.

    The reason we recommend using 8.8.8.8 and 8.8.4.4 for the DNS server is because they work when ISP assigned DNS servers do not. The DNS server assigned to you by your ISP is not able to resolve the domain for web services, therefore not allowing the printer to connect. 
    I assure you that it is with your ISP's DNS server and not the printer. If you were to take the printer back to the store and get a replacement, you would have the same issue, unless you changed the DNS. Same goes for any of our web service enabled printers. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • WRT54G ver 6, MTU test fails when trying to connect to Xbox360 live

    MTU test fails when trying to connect wirelessly to Xbox360 live.  Firmware is current.   I have a WRT54G version #6, Motorola Surfboard SB5101 Cable Modem, running AOL HighSpeed Broadband through Time Warner Cable.  Changing the MTU setting does not work.  I have tried several other suggestions found on these boards but nothing seems to work.  Any help would be greatly appreciated!

    hi twhale.... If you had already tried the settings i posted ... in such case you can do one thing .... access router setup page ... under Security ... uncheck block wan request ... click save settings .... Under Applications & Gaming tab ... click port range forwarding .... forward ports 88 & 3074 for the static Ip of the X-BOX ... click save settings . Click save settings ... check X-BOX live test ... if still shows the same error ... upgrade/reflash the firmware ...

  • My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

    My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

    Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?

Maybe you are looking for

  • 1.4.2.04 Binary Compatible with 1.3.1.07?

    OS is Solaris 7 on SPARC. Have an app built with 1.3.1.07. Building againt 1.4.2.04 is futile because of the import statement (package-less classes) issue. Attempted to run the app against JVM 1.4.2.04, and get JVM core dumps... log file (created by

  • Grey 'mist' on my objects

    Hello I have some objects and they have to be black. But if I set te color to #000000 I get some grey color. can someone tell me how I can remove this ?

  • Cannot Rotate iPhone Images

    I no longer can rotate screen to landscape view in any of the applications that support this feature. Is there a setting I need to adjust or is there another problem? I noticed this after I installed IOS 4.0.1 but am not sure that was the direct caus

  • Zen M last final album track not load

    Whenever i load an album onto my M, the last track does not load. It only happens on cd's that have extra media attached to the last track e.g. videos. how do i change the setting to add that last track? i can add the track on after if i download it

  • If I get windows boot camp will I be able to play Tomb raider and Sims 3

    I an getting a new laptop for school but I also what to play games like that new Lara Croft and the sims 3.  I have heard about windows boot camp. I think I want this retina model 5-inch: 2.3GHz with Retina display 2.3GHz quad-core Intel Core i7 Turb