Connection failure after changing certificate

Hi!
I have recently renewed Our certificate on the RD web server. The error is:
The computer can not connect to the remote computer because an error occurred on the remote computer you want to Connect.
I have changed back to the old certificate but that does not solve it.
Clues anyone?
Pittbull

shutdown the xraid, remove power cables an batteries.
After a few minutes, reconect all.

Similar Messages

Can't connect wifi after change channel and mode in router

I have a problem with wifi connection. I've been using arch linux for awhile now and my wireless connection is worked well until I setting my router via browser. I change my router channel from 6 to 1 and wireless mode to 802.11n. Usually in windows it will disconnected for awhile then it will connected again, but with arch linux its just disconnected and can't connect anymore. My AP's name before is "olympian hermes", but now it change to "olympian+hermes". in my router setting the name doesn't change (still: olympian hermes).
I've using windows to test if there is problem with my router but it's worked fine in windows. After that i'm using my android phone to make a wifi, but it still didn't work with another network.
I hope someone could help me, thanks in advance.
Here is my journalnetcl -xn output:
Sep 08 07:30:46 arch network[2233]: Starting network profile 'wlp5s0-olympianxa0hermes'...
Sep 08 07:30:46 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
Sep 08 07:31:02 arch network[2233]: WPA association/authentication failed for interface 'wlp5s0'
Sep 08 07:31:02 arch network[2233]: Failed to bring the network up for profile 'wlp5s0-olympianxa0hermes'
Sep 08 07:31:02 arch systemd[1]: netctl@wlp5s0\x2dolympianxa0hermes.service: main process exited, code=exited, status=1/FAILURE
Sep 08 07:31:02 arch systemd[1]: Failed to start Networking for netctl profile wlp5s0-olympianxa0hermes.
-- Subject: Unit netctl@wlp5s0\x2dolympianxa0hermes.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d
-- Unit netctl@wlp5s0\x2dolympianxa0hermes.service has failed.
-- The result is failed.
Sep 08 07:31:02 arch systemd[1]: Unit netctl@wlp5s0\x2dolympianxa0hermes.service entered failed state.
Sep 08 07:31:03 arch sudo[2168]: pam_unix(sudo:session): session closed for user root
Sep 08 07:31:11 arch sudo[2716]: wenhui : TTY=pts/0 ; PWD=/home/wenhui ; USER=root ; COMMAND=/usr/bin/journalctl -xn
Sep 08 07:31:11 arch sudo[2716]: pam_unix(sudo:session): session opened for user root by wenhui(uid=0)
Last edited by hermesolympian (2013-09-08 06:43:09)

uhhh theres somthing(s) screwy in your post or maybe its just my screwy brane(quite possible)
go over the wiki line by linehttps://wiki.archlinux.org/index.php/Netctl
be precise and good luck!

Connection fails after changing router to wpa

hi there i got a wireless-b BEFW11S4 router and my pc is using a wireless-g adaptor. my internet is supplied by a company who reguired us to change to wpa and after that my pc could't connect to the internet. my laptop is still able to connect so im wondering what is wrong

im not sure but that shouldn't be the case. my adaptor can connect fine when i disable the wireless security(wpa pre-shared key)in the router wireless settings. unless ofcuase that a b router cant accept a g adadpotr when running wpa

Unable to connect even after changing settings as advised

I recently talked my mother into buying an Apple and used iChat A/V as the primary excuse. However, we are unable to connect on iChat (through AIM), like many others I have read about in this forum.
I am using a Motorola DSL modem, style MSTATEA and a Belkin Wireless G router.
I have changed my Quicktime Settings to 1.5, my AIM Proxy to 443, and my bandwith to 500 as suggested. Here is the log:
iChat Connection Log:
2009-05-05 19:55:57 -0400: AVChat started with ID 3925203817.
2009-05-05 19:55:57 -0400: 0x1a622120: State change from AVChatNoState to AVChatStateWaiting.
2009-05-05 19:55:57 -0400: premaniacal4: State change from AVChatNoState to AVChatStateInvited.
2009-05-05 19:56:00 -0400: 0x1a622120: State change from AVChatStateWaiting to AVChatStateConnecting.
2009-05-05 19:56:00 -0400: premaniacal4: State change from AVChatStateInvited to AVChatStateConnecting.
2009-05-05 19:56:11 -0400: 0x1a622120: State change from AVChatStateConnecting to AVChatStateEnded.
2009-05-05 19:56:11 -0400: 0x1a622120: Error -8 (Did not receive a response from 0x1a622120.)
2009-05-05 19:56:11 -0400: premaniacal4: State change from AVChatStateConnecting to AVChatStateEnded.
2009-05-05 19:56:11 -0400: premaniacal4: Error -8 (Did not receive a response from 0x1a622120.)
Video Conference Error Report:
Video Conference Support Report:
0.310369 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
173.018088 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 2 returns 1
783.115517 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 3 returns 1
783.254048 @Video Conference/VCInitiateConference.m:1599 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
840.894462 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 4 returns 1
867.823022 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 5 returns 1
1935.147674 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 6 returns 1
1935.297776 @Video Conference/VCInitiateConference.m:1599 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
Video Conference User Report:
0.000000 @:0 type=5 (00000000/16402)
[Local SIP port]
Thanks in advance!

Ok,
If it is this particular Motorola then it routes
http://portforward.com/english/routers/port_forwarding/Motorola/2210-02-1006/iCh at.htm
The link is a page on a site about setting up Port Forwarding.
The Main purpose for you though is the default access info so you can get to the Set Up pages.
Now as set up pages are never the same and can even vary from the same manufacturer it is worth checking all the tabs at the top and all the buttons on the right of this one and any links in the main section to see if it has UPnP
UPnP (Universal Pug and Play) is an Enable/Disable option of allowing the apps on a computer to control which ports are open. (They close after a period of NON use)
In the firewall section you may find the device's own firewall has 4 levels.
This should be at Low of Off for iChat.
If you can find UPnP enable that and Save Settings for any changes you make.
The same site's front index page list many more Belkins than Motorolas.
Which model specifically do you have ?
Having two devices that route causes it's own problems for iChat.
Like you say you have done for the Mac you should set the Modem to allow Static Routing (Called Manually on the Mac) to the Belkin.
This means finding out the Modem's IP (in the first link), the Subnet Mask it uses and the DNS Servers from the ISP.
This info needs to be copied in the corresponding boxes that the Belkin has for the Mac's Network Preferences and tabs after you change it from Getting an IP Automatically or similar phrase.
Summary,
Confirm Belkin Model.
Set up Belkin and Motorola/Netopia to be Static Routing
Open ports in both to allow iChat (using UPnP where possible)
4:47 PM Friday; May 8, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Connection failure after deploying to 10.1.3 app server

I am working on a three-tier application that uses session EJB facades and TopLink for persistence. I configured a datasource in the embedded OC4J server preferences in JDeveloper (10.1.3) and can successfully deploy my persistence code to the embedded server and access it from a test client.
I recently installed Oracle App Server 10g 10.1.3 to be used for integration testing. In JDeveloper, I configured a new application server connection and EJB Jar deployment profile to allow me to deploy my persistence code to the new server. When I deploy my code to the server and attempt to use one of the session EJB persistence methods, I get the following exception message:
Internal Exception: java.sql.SQLException: javax.resource.spi.ApplicationServerInternalException: Unable to create a connection. Connection factory has been stopped.Error Code: 0
In the Oracle Enterprise Manager, my application is running and the datasource and connection pool test successfully.
If I restart OC4J from Oracle Enterprise Manager, my application works correctly, at least until I have to deploy new code to the server, at which time the above error reappears. My question: Should OC4J have to be restarted each time new code is deployed? I am not making any changes to the datasource or connection pool configurations. Thanks.

Thanks Jaap.
I was told recently by someone at Oracle that Forms/Reports is supported on 10.1.3.x and eventually on 11g (not yet released), and I was also told 10.1.3 doesn't require two servers, but I'm having trouble finding much to support either claim.
Reason I'm asking is that we're currently using the client/server Forms/Reports and need to decide on a migration path and l don't know if it's wise to continue with the 10.1.2 App Server knowing it's going to be de-supported in a few short years and I don't want to go with 10.1.3 if it requires additional servers (we're small). We're looking at APEX as a possible alternative...
Tim

Officejet Pro 8600 (Printer Failure after changing ink)

I use an hp Officejet Pro 8600 on a windows 8.1 operating system. About a week ago i replaced my black ink but after restarting my printer, an error message arreared on my screen which reads ' There is a problem with the printer or ink system. Turn printer off, then on. If problem persist, contact HP'. I have since turned off my printer and turned it back on but that has not solved the problem. What do i do next?

Yes if the printhead is damaged, it would need replaced (to print). But beforedo that, please double check it's not something simple like forgot to removethe protective cover, didn't seat the cartridge properly, etc. see: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDispl...
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

CHANGING IP ADDRESS OF A LAPTOP AFTER CHANGING IP ADDRESS OF WIRELESS ROUTER CONNECTED TO DSL MODEM

DO YOU HAVE TO CHANGE TO CHANGE THE IP ADDRESS OF THE LAPTOP CONNECTED WIRELESS AFTER CHANGING THE WIRELESS ROUTER'S IP ADDRESS TO 192.168,2,1 BECAUSE DSL MODEM USES 192.168.1.1, THE WIRELESS ROUTER IS IN A DIFFERENT SUBNET FROM THE DSL MODEM

Your laptop will find the correct IP address automatically.
Greetings from Northern Ontario, Canada

Can't see design view after changing connections file from localhost to a remote host & back again

I was using localhost to test files before changing the connections document over to a remote host, since I couldn't get dreamweaver to connect to the remote host, I changed back to localhot. My files are all .php files. This is a dynamic site. After I changed my connection back to my local host my design view no longer works. It's competly grey with 3 small icons at the top on the left. I can view in live view and I can view in the browser. But no longer in design view after being able to for 6 months. The 3 icons are a hard drive case, a document, and a link symbol . When I click in code view the design view turns grey when I click in design view it turns white. I am using wamp for the localhost, Windows XP home, Dreamweaver CS5. Can someone please tell me how to go back to design view. This happens with any & all files including non dynamic .html files. Also having a problem connecting to my remote host. using godaddy, and they have tried with me for 2 hours to connect, I just keep getting password is incorrect. Thank you for any help, Stacey

I would also recommend clearing the Site cache, which may help with the connection failure. To do so, choose Site > Advanced > Recreate Site Cache.
After doing so, be sure to go back into your Site Setup, and make sure the FTP address, user name, and password are all correct. (Click the Test button in there to verify.)
If that doesn't help with getting connected to your server, you might try an alternate FTP client (e.g. FileZilla) to just make sure you are entering the right connection information. It could be that GoDaddy is having some issue, or maybe you just mistyped something (I know I do this often when I type too fast).
As for the issue with Design View, try clearing the Dreamweaver cache. Instructions are here: http://forums.adobe.com/thread/494811
You might also try toggling the location of Design View. That is, when in Split View, choose View > Design View On Left. Then, choose that menu option again to reset the location back to the right.
Resetting the workspace might also be recommended. Window > Worksapce Layout > Reset 'name of current workspace'

IPad no longer connecting to HP Photosmart Plus B210 after changing black tore cartridge

I had my iPad nicely connected to my HP Photosmart Plus B210. However, after changing the black tore cartridge I am no longer able to print from the iPad. The printer statur report and the wireless network test both show everything is OK. Most of the time the iPad recognizes the printer and accepts the print command without any error messages. However, sometimes it returns the message that the printer is offline even though it found the printer earlier. Any solutions? Thanks

I too have a B210 and the IPAD has printed marvelously via WIFI for about a half a year. Now, when the IPAD print radio button appears it still lists the B210 is available as if all is good but the printer doesn't come to life when the print command is issued. Printer sez it is connected to the router, too. I have reset the router and the printer a number of times and the printer sez everything is good. But, I can't print any longer from the IPAD. bummer.

SQL connection errors when stress testing mobile service: SQL failure after 3 attempts

I have created a Mobile Service (node.js), which has been running for a few months with 50-100k api calls per day with no issues.
The usage of the service will be scaled up soon, and it will receive much higher traffic, so I am running stress tests (on a staging deployment of the same service).
The api in question queries data from the sql database that is attached to the mobile service, but caches the resulting data in a redis database for 5 minutes, so each call with identical parameters will not access the SQL database, just the redis cache.
My first test never has any problems:
Run a single api calls as fast as possible using the program wrk (https://github.com/wg/wrk). This test never has a problem, and I have run it an hour continuously with a sustained rate of 200 req/s and very few timeout errors.
The second test always causes problems:
I created a list of 5 different api calls to the same service (same endpoint, but different parameters), and I run those randomly interweaved as fast as possible. I use the program locust (http://locust.io) for this, spawing 10.000 clients at a rate of 500
per second. For the first few seconds everything goes ok, but then connections start failing massively.
I get mostly:
Error: SQL failure after 3 attempts. Error: [Microsoft][SQL Server Native Client 10.0]TCP Provider: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected
host has failed to respond.
(SqlState: 08001, Code: 10060)
And I see this in the http response:
ConnectionError(ProtocolError('Connection aborted.', gaierror(8, 'nodename nor servname provided, or not known')),)
The strange thing is that since I am running the same five calls repeatedly, only the very first of each call will actually access the sql database, every subsequent call will just return data directly from redis, and not try to access the sql database at
all.
In the azure console for the sql database in question, I see 1860 successful connections and 11 failed connections, which does not explain the massive failure rate I am seeing.

Thanks for sharing your tips on this forum, as it will be useful for other users, that run into this issue.
Feedback like this will also help us improve error reporting in the next release, as missing class files in the packaged application is a common issue when developers are moving from the embeded oc4j instance packaged with JDewveloper to standalone instances.
-Eric

Airport Card won't connect after changing wireless networks

Hello,
I have a black macbook with an internal airport extreme wireless card. I use the computer at school and at home. Both school and home have functioning wireless networks in which other computers are connected and running with no problems.
When I open my laptop and wake it from sleep after changing from school to home or visa versa the airport card often will not recognize the wireless network. On many occations, even when the network is recognized it will not automatically connect to it (I have it set to do). A message saying "There was an error joining the network" comes up. The only resolution has been to reset the computer (which doesn't always work) or reset the PRAM.
Sometimes after reseting the PRAM the computer doesn't even recognize that I have an airport card installed at all. When this happens I have to reset the PRAM again to resolve it.
As a final note, when the computer doesn't automatically recognize the network and I click on the desktop wireless network icon, I get the "spinning beach ball" for a period of time before the drop down box with the available networks shows up. This seems strange to me because it shouldn't be a RAM issue as I have 2GB of ram installed on this computer.
Any help would be appreciated.
K.
MacBook (Intel) Mac OS X (10.4.8)

Try the following:
Delete Preferred Network(s)
- System Preferences > Network > AirPort > Configure
- In the "By default, join:" pull-down menu, select "Preferred networks"
- Delete the network(s) you regularly use from the list
Delete AirPort Keychain Entries
- Launch the "Keychain Access" application located in Applications/Utilties.
- Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
- Restart, or log out then back in.
Add Preferred Network(s)
- System Preferences > Network > AirPort > Configure
- In the "By default, join:" pull-down menu, select "Preferred networks"
- Add the preferred network(s) using the "+" button.
- Restart or log out then back in.
If you haven't already, you may want to consider creating a network location for each (school & home) with the appropriate network settings required for connectivity at each. For each location, you can set the preferred network.

TS1702 After changing my phone number on iPhone, my iPad will not connect to my iMessage or FaceTime. Keeps giving me a message (could not sign in. Please check your network and try again). Please help!!!

After changing my phone number on iPhone, my iPad will not connect to my iMessage or FaceTime. Keeps giving me this message (Could not sign in. Please check your network and try again). Please help!!!

iPhone 4 and iPod touch (4th generation): Using FaceTime
http://support.apple.com/kb/HT4319
iPhone 4 and iPod touch (4th generation): Using FaceTime behind a firewall
http://support.apple.com/kb/HT4245

Cannot connect to iTunes in iPad mini after change a new password

I cannot connect to iTunes after changed a new password...

I tried, but it doesn't work...
I logout in setting, and sign in again, it show fail to connect,
After that, I open iTunes, and it change to mainland version automatically... :(

TS3048 [SOLVED] after changing batteries: keyboard did not connect to iMac

After changing the batteries of my wireless keyboard, it refused to connect to the iMac.
It took me half an hour to discover that it was connected to my iPhone instead.
So if you ever created a BT connection on your iPhone, make sure it does not interfere with the iMac when you swap batteries...
I simply removed the BT connection on my iPhone.
Hope this helps others.

Please use Apple's Troubleshooting wireless mouse and keyboard issues located by clicking http://support.apple.com/kb/ts3048. Also it is wise to keep a cheap USB keyboard & mouse around in the event of bluetooth problems.

I'm having strange random connection failures. Are there ineffieciency in my config?

I've been having strange, random connection failures and I'm trying to eliminate possible causes.
What happens is while I'm browsing on the net over wifi, a link will at random not connect to the site, but instead fault to the ISP error page. It happens with highly reliable sites like google, or ebay, or whatever. If I direct connect to the cable modem, the problem site is immediately available.
I'm sitting <6 feet from a 871W router (with antenna). There's one router in my building and others are at my neighbors.
Below is the conf file. Just to imagine how rediculious this problem is, here's a screen shot from a web page. This shows a web page I visited, and after clicking on a link (an embedded youtube video), the error showed up within the page itself.
Why would only some URLs fail to connect? Is there inefficiencies in my config?
    Building configuration...
    Current configuration : 4750 bytes
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname TooterTurtle
    boot-start-marker
    boot-end-marker
    logging buffered 51200 warnings
    no logging console
    aaa new-model
    aaa authentication login default local
    aaa authorization exec default local
    aaa session-id common
    clock timezone NewYork -5
    clock summer-time NewYork date Apr 6 2003 2:00 Oct 26 2003 2:00
    dot11 syslog
    dot11 ssid TooterTurtle
       vlan 2
       authentication open
       authentication key-management wpa
       guest-mode
       wpa-psk ascii 0 [my wifi password]
    no ip source-route
    no ip gratuitous-arps
    ip cef
    no ip dhcp use vrf connected
    ip dhcp excluded-address 192.168.10.1 192.168.10.10
    ip dhcp excluded-address 10.0.0.1 10.0.0.10
    ip dhcp pool vlan1
       import all
       network 192.168.10.0 255.255.255.0
       dns-server 192.168.10.1
       default-router 192.168.10.1
       domain-name Ethernet
    ip dhcp pool vlan2
       import all
       network 10.0.0.0 255.255.255.0
       domain-name WiFi
       dns-server 10.0.0.1
       default-router 10.0.0.1
    ip dhcp pool MrWizard
       host 192.168.10.100 255.255.255.0
       hardware-address 0011.0917.66fa
       client-name MrWizard
    ip dhcp pool MasterShake
       host 192.168.10.101 255.255.255.0
       hardware-address 0022.681c.fbcc
       client-name mastershake
    ip auth-proxy max-nodata-conns 3
    ip admission max-nodata-conns 3
    no ip bootp server
    ip domain name mydomain.com
    ip ddns update method ccp_ddns1
     HTTP
      add [zone edit account and url]
      remove [zone edit account and url]
    username admin privilege 15 secret 5 [encrypted secret]
    archive
     log config
      hidekeys
    no ip ftp passive
    ip ssh version 1
    bridge irb
    interface FastEthernet0
     description AdminInterface
    interface FastEthernet1
     description MrWizard
    interface FastEthernet2
     description Belkin
    interface FastEthernet3
    interface FastEthernet4
     description ComcastCableModem
     ip address dhcp
     ip verify unicast source reachable-via rx allow-default 100
     no ip redirects
     no ip unreachables
     no ip proxy-arp
     ip nat outside
     ip virtual-reassembly
     speed auto
     full-duplex
    interface Dot11Radio0
     no ip address
     no ip redirects
     no ip unreachables
     no ip proxy-arp
     encryption vlan 1 mode ciphers tkip
     encryption vlan 2 mode ciphers tkip
     ssid TooterTurtle
     speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
     station-role root
    interface Dot11Radio0.1
     description TootersWiFi
     encapsulation dot1Q 2
     no cdp enable
     bridge-group 2
     bridge-group 2 subscriber-loop-control
     bridge-group 2 spanning-disabled
     bridge-group 2 block-unknown-source
     no bridge-group 2 source-learning
     no bridge-group 2 unicast-flooding
    interface Vlan1
     description EthernetOnly
     no ip address
     no ip redirects
     no ip unreachables
     no ip proxy-arp
     ip nat inside
     ip virtual-reassembly
     bridge-group 1
    interface Vlan2
     description WiFiOnly
     no ip address
     bridge-group 2
    interface BVI1
     description EthernetOnly
     ip address 192.168.10.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly
    interface BVI2
     description WiFiOnly
     ip address 10.0.0.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 FastEthernet4
    ip http server
    ip http authentication local
    no ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 10000
    ip dns server
    ip nat inside source list 101 interface FastEthernet4 overload
    ip nat inside source list 102 interface FastEthernet4 overload
    ip nat inside source static tcp 192.168.10.100 80 interface FastEthernet4 80
    ip access-list extended vlan1
     deny   ip 10.0.0.0 0.0.0.255 any
     permit ip any any
    access-list 100 permit udp any any eq bootpc
    access-list 101 permit ip 192.168.10.0 0.0.0.255 any
    access-list 102 permit ip 10.0.0.0 0.0.0.255 any
    no cdp run
    control-plane
    bridge 1 protocol ieee
    bridge 1 route ip
    bridge 2 protocol ieee
    bridge 2 route ip
    line con 0
     no modem enable
    line aux 0
    line vty 0 4
     transport input telnet ssh
     transport output telnet ssh
    scheduler max-task-time 5000
    end

I removed the ip router 0 0 to no great effect, which I consider to be a win.
I'm guessing that since overload is what--I understand--translates the one outside to the many inside IPs, that the suggestion to have only one overload configured means I should combine the two ip ranges into one.
I deleted 10.0.0.0 network. Changed the bridge references to 1 and vlan references to 1. Now wifi and ethernet should all be using the same internal network? That's the idea, right? Any more fat?
[EDITED]
dot11 syslog
dot11 ssid TooterTurtle
   vlan 1
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 0 [my passphrase]
no ip source-route
no ip gratuitous-arps
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp pool vlan1
   import all
   network 192.168.10.0 255.255.255.0
   dns-server 192.168.10.1
   default-router 192.168.10.1
   domain-name Ethernet
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
no ip bootp server
ip domain name [my url]
ip ddns update method ccp_ddns1
HTTP
add http:...[zoneedit]
remove http:[zoneedit]
no ip ftp passive
ip ssh version 1
bridge irb
interface FastEthernet0
description AdminInterface
interface FastEthernet1
description MrWizard
interface FastEthernet2
description Belkin
interface FastEthernet3
interface FastEthernet4
description ComcastCableModem
ip address dhcp
ip verify unicast source reachable-via rx allow-default 100
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
speed auto
full-duplex
interface Dot11Radio0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encryption vlan 1 mode ciphers tkip
ssid TooterTurtle
speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
station-role root
interface Dot11Radio0.1
description TootersWiFi
encapsulation dot1Q 2
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Vlan1
description EthernetOnly
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly
bridge-group 1
interface BVI1
description EthernetOnly
ip address 192.168.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip dns server
ip nat inside source list 101 interface FastEthernet4 overload
ip nat inside source static tcp 192.168.10.100 80 interface FastEthernet4 80
ip access-list extended vlan1
permit ip any any
access-list 100 permit udp any any eq bootpc
access-list 101 permit ip 192.168.10.0 0.0.0.255 any
no cdp run
control-plane
bridge 1 protocol ieee
bridge 1 route ip

Connection failure after changing certificate

Similar Messages

Maybe you are looking for