Connection failure when connecting to the net with...

I hope someone can help me. I have got Nokia PC suite on my PC. I often use it to connect to the net. Just recently I had a few viruses on my pc and now since they have been cleaned off I keep getting a connection failure when I try to connect. I have tried uninstalling and reinstalling my software but nothing seems to help. I know it is something to do with my pc as I have tried four different phones that do work on other pc's, just not this one.
I have checked to make sure all the modem settings are right and that the phone is detected as a modem.
What should I try that might help solve this??
Thanks
Katherine

Make sure you have entered the access point in the one touch access settings, enter the settings maually and try to connect.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Similar Messages

  • I can not get my mac book air to connect  to the net with my broadband

    How can I get my mac book air to connect to the net with a broadband ?

    Power off the router. Unplug it from the wall. Wait for few minuets.
    Power off the router. Wait a while.
    Connect the router back to to the wall.
    Power the router back on. Wait  until all lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/HT1455
    For more on this:
    http://support.apple.com/kb/HT4628

  • I'm getting a verification failure when connecting to iCloud? How can I fix this?, I'm getting a verification failure when connecting to iCloud? How can I fix this?

    I'm getting a verification failure when connecting to iCloud? How can I fix this?, I'm getting a verification failure when connecting to iCloud? How can I fix this?

    Did you respond to the verification email from Apple by clicking the Verify Now link?  Make sure you are checking the email address you used to set up your iCloud account.  Check the spam/junk folder as well as the inbox.  If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.

  • I'll ask this again.  I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to LR (Facebook OK),

    I'll ask this again.  I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to Flickr (Facebook OK), now I can't get it to authorize, I loaded 3rd party JR plug in and still get can't authorize.  Can anybody help?  Basically LR is useless, it has been nothing but problems.

    It would probably be better to continue your previous thread on the same question than to start a new one.

  • I have two airport extremes, one acting as amodem and the other operating in bridge mode.  The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable. How do I know if they are operating wired or wirelessly

    I have two airport extremes, one acting as a modem and the other operating in bridge mode.  The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable (I did this to check that the 100 feet of Cat 5a cable connecting them was working). How do I find out if they are operating wired or wirelessly?  I want to know as I assume I will get much better speeds if they are wired.

    Hi Bob, many thanks for the prompt response.  I think I did what you suggested, but you're the expert so I have sent over a few screenshots.  The extreme in question is High Birches Home Office (the rest of the network has been in place and working well for some time).  My new home office is going to be in the garden, circa 100 feet from the main house.  I have installed armoured Cat5e cable down to the shed that is going to be adjacent to the home office once built and situated the High Birches Home Office Airport Extreme there temporarily.  Everything works well, so I was surprised when I unplugged the ethernet, that it still worked.  I also tested the ethernet cable by switching off my laptop's wifi and unplugging the cable from the airport extreme and directly into the laptop and that worked ok.
    If the screenshots below (I did every Airport utility tab for the High Birches Home Office) don't tell you anything more, then the set-by-step instructions would greatly appreciated so I can ensure I completed the steps correctly. 
    Many
    Thanks, Greg.

  • WIFI random connection problems when connected to Cinema monitor

    This is macbook pro purchased prior to 2008. I use an external cinema monitor in my office at home. Recently when I start the laptop with monitor connected I cannot get a airport connection. If I disconnect the monitor and restart downstairs I get an automatic airport connection.
    I've changed channels on airport to CH 4 since we use cordless phones which I've read are on CH 11.
    If I retart laptop downstairs and bring back upstairs and connect to cinema display, i can get airport connection.
    Any thoughts on this? Seems to be a system configuration issue?

    Odd that in your outline of troubleshooting steps you say you "disconnect the monitor and restart downstairs"...
    Can you start the macbook pro UPSTAIRS where you want to be WITHOUT the cable attached to external display and get CONNECTION?
    Sounds crazy, but mabey it's your signal strength? Sometimes a wireless connection will work at the edge of it's range okay but establishing connection at the same place will not work. Does that make sense?
    Ensure that you can connect to the network when "upstairs" "near the cinema monitor" like you would if it were all working okay but DONT connect it.
    Eliminate the up/down part first.
    Can you elaborate on your network configuration? What Modem, Router, etc are you setup with?

  • I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

    I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

    That is because you don't have a web server configured and running to serve the html page. In order to see the page in a browser you need to access it using a url similar to http://localhost/~yourUserName if you are serving the page from your user account.
    Prior to Mountain Lion you could go into web sharing and turn on the web server. With Mountain Lion there is no option, other than using terminal, to turn on the web server. The web sharing menu item has been removed in Mountain Lion. Apache is still on your computer but it will take a little searching these forums or the Internet to find how to turn it on.
    If you want a graphic user interface to turn on/off the Apache server you could download and install a server application like xampp, http://www.apachefriends.org/en/xampp.html. I use this and it works well.

  • My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad

    My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad

    Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
    Use the wall-mount charger that came with the iPad and charge overnight.  Do NOT use an iPod/iPhone charger.  Do NOT use a computer's USB port.  Then, operate it normally until auto shut-down (ignore any low level alerts that may appear).  An irony is that doing that test to determine the total operating time is also the procedure necessary to calibrate the battery level meter.
    I'm not claiming that you do not have a problem.  I am stating, however, that we don't yet know.  If the above test does, in fact, indicate a problem, read this.
    Also, according to Apple:
    Use Your iPad Regularly
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

  • Why doesn't the rotate gesture on my trackpad behave as it used to for switching between tabs when it works the same with all other programs besides Firefox?

    Why doesn't the rotate gesture on my trackpad behave as it used to for switching between tabs when it works the same with all other programs besides Firefox?
    I changed the about:config to make the rotate gesture move between tabs, and it worked great for well over a year. Now it behaves erratically as described here:
    https://bugzilla.mozilla.org/show_bug.cgi?id=877598
    It used to be very controllable to move one tab over, now it is erratic and moves quickly and to unexpected tabs regardless of how slow I do the rotate gesture. This is the main reason I use Firefox over Chrome and I would like to continue to do so unless there is no fix to this.

    Just set the browser.gesture.twist.threshold to something around 15-25.

  • I think in the iOS 7.1 it's will be very nice if you will make system in iPhone 5s that when you open the iPhone with your finger Siri will say welcome back [name you can choose] it's will be very nice.

    I think in the iOS 7.1 it's will be very nice if you will make system in iPhone 5s that when you open the iPhone with your finger Siri will say welcome back [name you can choose] it's will be very nice.
    In the options before you click on add finger you will be able to choose your  name
    And if you don't want it so you will click on i don't want it
    and it won't say your name

    We are all users here, just like you. Apple does not follow these discussions.
    But you can tell Apple about your wishes here:
    Apple - iPhone - Feedback

  • I could not remember my apple ID password so I made a request for a new one. When I received the email with the link on resetting my password it was addressed to John Ohare. My name is not John Ohare. Does this mean someone is hacked my iCloud account?

    I could not remember my apple ID password so I made a request for a new one. When I received the email with the link on resetting my password it was addressed to John Ohare. My name is not John Ohare. Does this mean someone has hacked my iCloud account?

    Hello Corinne Craven,
    Thank you for using Apple Support Communities!
    You can update the name on your Apple ID here:
    Appleid.apple.com
    If you suspect unauthorized access to your apple ID I would normally recommend resetting your password, but you have already done this.
    Here is some information about 2 step verification which is another level of security for your account.
    Apple ID: Frequently asked questions about two-step verification for Apple ID
    http://support.apple.com/kb/HT5570
    Be sure to read all the information in the article if you choose to use two-step verification.
    Take care,
    Sterling

  • I am using the pen tool to clipp an image. Sometimes when I apply the mask WITH NO FEATHER it still appears to be feathered? Does this have to do with Anti-aliasing

    I am using the pen tool to clipp an image. Sometimes when I apply the mask WITH NO FEATHER it still appears to be feathered? Does this have to do with Anti-aliasing?

  • When I use the inthernet with ipad it return home. What should I do?

    When I use the inthernet with ipad it return home. What should I do?

    any headphones will work, their are not any special apple ones that are needed.

  • HT1420 Even when I authorised my pc on my iphone, when i sync the iphone with a new purchase, it prompts and error that unable to sync due to pc not authorised.

    Even when I authorised my pc on my iphone, when i sync the iphone with a new purchase, it prompts and error that unable to sync due to pc not authorised.

    Hello, Jagatheswary. 
    Thank you for visiting Apple Support Communities.
    The most common cause for this issue would be media or Apps present in your library that is purchased with another Apple ID.  The article below will walk you through the process of verifying if that is the case or correcting the issue if not.
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Cheers,
    Jason H.

  • When I use the camera with the flash it is way to bright is there a way to adust that?

    when I use the camera with the flash it is way to bright is there a way to adust that?

    Only way I can figure is having double entries one with singular + some unique field, (maybe called Siri), then making a Smart group for one or both.

Maybe you are looking for