COnnection Failures - Unable to edit
I have multiple sites that use Contribute to publish to our
internal sites. ONe of our sites two weeks ago lost the ability to
publish. The following error appears:
User Directory Connection Failure
The User Directory publishing services reported an error.
Trying to connect to:
http://stlms137:8080/pubserver/
Error Details: End of file or no input: 'Operations
interrupted or timed out'
Have you checked with ISP or other server maintenance if
anything changed in that period?
Similar Messages
-
Dear service provider, I'm unable to login to facebook even though i tried to uninstall and again reinstall as per the observation from the forum discussion.. but still it gives me arror as Timeout connection, or connection failure and check internet connection.. how to troubleshoot, pls suggest me..
2ndly I'm unable to search by some of the keywords in itunes. means iTune is not fetching the required information rather it gives no result found message..Have you tried a hard reset of the iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, work through each of the troubleshooting suggestions in this Apple support document as necessary.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock -
Unable to edit or delete profile in Access Connection 5
Hi Everybody!
I'm unable to edit or delete profiles in Access Connection on my T41 running latest Access Connection v5.
The edit and delete buttons on the Access Connection Profile menu are shown only in light grey color and it's not possible to click them. I have administrator rights on my machine. These profiles were initially migrated from a very old v3 (automatically during system update) and I guess that this is one of the root causes of my problem.
I have also tried to use the QCTRAY.EXE /DEL command, but that's also not working. The profiles just remain there unchanged.
I would be very pleased if somebody could give me a hint on how to overcome this boring problem.
Best regards,
Helmut
Solved!
Go to Solution.v3 profiles are not compatible with v5.
The best solution in your case would be to uninstall Access Connections with profiles and then reinstall and create new profiles. -
I'm having strange random connection failures. Are there ineffieciency in my config?
I've been having strange, random connection failures and I'm trying to eliminate possible causes.
What happens is while I'm browsing on the net over wifi, a link will at random not connect to the site, but instead fault to the ISP error page. It happens with highly reliable sites like google, or ebay, or whatever. If I direct connect to the cable modem, the problem site is immediately available.
I'm sitting <6 feet from a 871W router (with antenna). There's one router in my building and others are at my neighbors.
Below is the conf file. Just to imagine how rediculious this problem is, here's a screen shot from a web page. This shows a web page I visited, and after clicking on a link (an embedded youtube video), the error showed up within the page itself.
Why would only some URLs fail to connect? Is there inefficiencies in my config?
Building configuration...
Current configuration : 4750 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname TooterTurtle
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
no logging console
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
clock timezone NewYork -5
clock summer-time NewYork date Apr 6 2003 2:00 Oct 26 2003 2:00
dot11 syslog
dot11 ssid TooterTurtle
vlan 2
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 0 [my wifi password]
no ip source-route
no ip gratuitous-arps
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp excluded-address 10.0.0.1 10.0.0.10
ip dhcp pool vlan1
import all
network 192.168.10.0 255.255.255.0
dns-server 192.168.10.1
default-router 192.168.10.1
domain-name Ethernet
ip dhcp pool vlan2
import all
network 10.0.0.0 255.255.255.0
domain-name WiFi
dns-server 10.0.0.1
default-router 10.0.0.1
ip dhcp pool MrWizard
host 192.168.10.100 255.255.255.0
hardware-address 0011.0917.66fa
client-name MrWizard
ip dhcp pool MasterShake
host 192.168.10.101 255.255.255.0
hardware-address 0022.681c.fbcc
client-name mastershake
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
no ip bootp server
ip domain name mydomain.com
ip ddns update method ccp_ddns1
HTTP
add [zone edit account and url]
remove [zone edit account and url]
username admin privilege 15 secret 5 [encrypted secret]
archive
log config
hidekeys
no ip ftp passive
ip ssh version 1
bridge irb
interface FastEthernet0
description AdminInterface
interface FastEthernet1
description MrWizard
interface FastEthernet2
description Belkin
interface FastEthernet3
interface FastEthernet4
description ComcastCableModem
ip address dhcp
ip verify unicast source reachable-via rx allow-default 100
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
speed auto
full-duplex
interface Dot11Radio0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encryption vlan 1 mode ciphers tkip
encryption vlan 2 mode ciphers tkip
ssid TooterTurtle
speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
station-role root
interface Dot11Radio0.1
description TootersWiFi
encapsulation dot1Q 2
no cdp enable
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 spanning-disabled
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
interface Vlan1
description EthernetOnly
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly
bridge-group 1
interface Vlan2
description WiFiOnly
no ip address
bridge-group 2
interface BVI1
description EthernetOnly
ip address 192.168.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface BVI2
description WiFiOnly
ip address 10.0.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 FastEthernet4
ip http server
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip dns server
ip nat inside source list 101 interface FastEthernet4 overload
ip nat inside source list 102 interface FastEthernet4 overload
ip nat inside source static tcp 192.168.10.100 80 interface FastEthernet4 80
ip access-list extended vlan1
deny ip 10.0.0.0 0.0.0.255 any
permit ip any any
access-list 100 permit udp any any eq bootpc
access-list 101 permit ip 192.168.10.0 0.0.0.255 any
access-list 102 permit ip 10.0.0.0 0.0.0.255 any
no cdp run
control-plane
bridge 1 protocol ieee
bridge 1 route ip
bridge 2 protocol ieee
bridge 2 route ip
line con 0
no modem enable
line aux 0
line vty 0 4
transport input telnet ssh
transport output telnet ssh
scheduler max-task-time 5000
endI removed the ip router 0 0 to no great effect, which I consider to be a win.
I'm guessing that since overload is what--I understand--translates the one outside to the many inside IPs, that the suggestion to have only one overload configured means I should combine the two ip ranges into one.
I deleted 10.0.0.0 network. Changed the bridge references to 1 and vlan references to 1. Now wifi and ethernet should all be using the same internal network? That's the idea, right? Any more fat?
[EDITED]
dot11 syslog
dot11 ssid TooterTurtle
vlan 1
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 0 [my passphrase]
no ip source-route
no ip gratuitous-arps
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp pool vlan1
import all
network 192.168.10.0 255.255.255.0
dns-server 192.168.10.1
default-router 192.168.10.1
domain-name Ethernet
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
no ip bootp server
ip domain name [my url]
ip ddns update method ccp_ddns1
HTTP
add http:...[zoneedit]
remove http:[zoneedit]
no ip ftp passive
ip ssh version 1
bridge irb
interface FastEthernet0
description AdminInterface
interface FastEthernet1
description MrWizard
interface FastEthernet2
description Belkin
interface FastEthernet3
interface FastEthernet4
description ComcastCableModem
ip address dhcp
ip verify unicast source reachable-via rx allow-default 100
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
speed auto
full-duplex
interface Dot11Radio0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encryption vlan 1 mode ciphers tkip
ssid TooterTurtle
speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
station-role root
interface Dot11Radio0.1
description TootersWiFi
encapsulation dot1Q 2
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Vlan1
description EthernetOnly
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly
bridge-group 1
interface BVI1
description EthernetOnly
ip address 192.168.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip dns server
ip nat inside source list 101 interface FastEthernet4 overload
ip nat inside source static tcp 192.168.10.100 80 interface FastEthernet4 80
ip access-list extended vlan1
permit ip any any
access-list 100 permit udp any any eq bootpc
access-list 101 permit ip 192.168.10.0 0.0.0.255 any
no cdp run
control-plane
bridge 1 protocol ieee
bridge 1 route ip -
I have a user with Outlook 2013 connected to an 2010 Exchange Server. I have a user that is unable to edit any existing contact, getting an error: Your changes cannot be saved because you don't have permission to modify some or all of the items in this folder.
Do you want to save a copy of this item in the default folder for the item?
I have checked the permissions on the mailbox folder as well as the Contacts folder. The user has "Owner" permission to these folders.
No other users report the problem, and loading the users account on another computer demonstrates the same problem.
Any ideas what I am missing?Hi,
The error indicates that the issue is related to permission. I recommend you use the Get-MailboxPermission -Identity xxx |fl cmdlet to check if the permission is right. What's more, please check if OWA has the same issue.
If the issue persists, I recommend you remove the owner permission at first. Secondly, use the following cmdlet to add the owner permission and check the result.
Add-MailboxPermission -Identity "xxx" -Owner "xxx"
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support -
Unable to edit maintenance plan Sql Server 2008R2
Hi All,
I am unable to edit sql server maintenance plan and it is failing continuously from job as well.When I try to open the same the throws an error:
Microsoft SQL Server Management Studio is unable to load this document.:
Error loading from XML. No further detailed error information can be supplied for this problem because no Event objects was passed where detailed error information can be stored. It used to work pretty well in the past.Throws same error when I try to connect
remotely.
Regards
RahulHas the MP been developed in SQL Server 2008r2 as well?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Unable to edit parameter in cr viewer
Hi All,
I have a report having parameter.I selected show in viewer panel as Editable.
When I run in cr viewer 2011 But I am unable to edit the parameter value.
Please suggestThe Standalone CR Viewer is Not meant to 'refresh' data - it cannot connect to the database to retrieve new records.
It can only work on 'saved data'.
This Viewer can only refresh reports that are hosted on the BO or CR Servers.
If you don't have these products, you can only share a copy of the report 'with saved data' and the users can view it in the free viewer - not refresh.
If you're trying to refresh data then you have the following choices other than the above:
1) Build a custom CR Viewer using CR SDKs that can refresh and bring in updated data
2) Browse the free/inexpensive 3rd-party viewers that can refresh data at:
http://kenhamady.com/bookmarks.html
-Abhilash -
How to Alert RFC connection failure via message mapping? Kindly Help!
Hi Experts,
I have a JMS - XI - RFC scenario.
JMS receives the Rosattenet PIP contents and sends it to RFC function module in remote SAP R/3 system.
I have a requirement where I have to monitor RFC connection failure because of the remote R/3 system being down. I have to send a email alert where the subject contains the PIP number to understand for which PIP the connection failed.
The PIP number exists in the PIP content at the interface.
If I use the Alert configuration in the runtime workbench for monitoring then I cannot dynamically pass the PIP number.
Only way I think of triggering alert is in the message mapping via a Java UDF.
But I am not sure how can I do this? How do I check in the UDF if RFC connection has failed? Is this the correct approach?
How to acheive my requirement? Note that my email subject content is dynamic bacause if PIP number.
Please help!
Thanks
Gopal
Message was edited by:
gopalkrishna baligaHi Gopal,
what version/sps of XI are u running?
The easiest way to do what u want inside a UDF is to
1. use JCo to try estabilish a connection to the remote SAP System
2. if that fails, use JavaMail to send an email message
Let your UDF work on the PIP number, accepting it as input, and (maybe) returning it as output if everything goes ok. Otherwise break the mapping execution as described by Michal in one of his last weblog (using Dynamic Configuration).
Note that the above method doesn't guarantee that the message will be actually delivered, as some seconds could last between your check and the real RFC delivery operated by the Adapter Engine...
I am evaluating a way to do the same with Alert Framework. I will let you know the result!
Cheers,
Alex -
I recently upgraded to Firefox 4 on my 3 yr old Macbook, though I am unsure if this is in fact connected. Now I am often unable to edit information I have typed into a search bar or text box (such as this one) even after reloading that page or pressing first the back, then the forward buttons. Has anyone else run into this, and does anyone know what is going on?
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Mail Connection Failures And EWS (Exchange Web Service) Errors
Hi,
I upgraded from Leopard to Snow Leopard on Friday, and was able to set up my Mail, iCal, and Address Book very quickly and easily. Everything has been working great until today, when I experienced an issue with emails with attachments. The company I work for uses Exchange 2007 hosted on Rackspace.
When sending an email with attachments, I sporadically receive a connection error. This is the same error that I usually get if a server goes offline or I lose my Internet connection - the one where you get the choice to either try again, send later, or use another server to send the email. I will receive this error over and over, and can then send an email with attachments a few minutes later without issue, so it is definitely a sporadic problem. I have not had this issue with emails that did not contain attachments. On at least one occasion, an email with attachments was delivered to the recipient successfully but failed to show up in my Sent Items either in Mail or on the Exchange Server's web mail client.
Rackspace was unable to diagnose the issue, but they have had several reports of the same problem. I looked in the console and saw several errors logged by Mail, all which appeared to happen around the same times that I had the connection failures for the messages with attachments.
8/31/09 1:17:00 PM Mail[1764] Error (null) occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
8/31/09 1:57:06 PM Mail[1764] Error (null) occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
8/31/09 2:32:14 PM Mail[1764] Error Error Domain=MFEWSErrorDomain Code=56 UserInfo=0x1179aa6f0 "The operation couldn’t be completed. (MFEWSErrorDomain error 56.)" occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
8/31/09 2:44:21 PM Mail[1764] Error Error Domain=MFEWSErrorDomain Code=56 UserInfo=0x116c0aa40 "The operation couldn’t be completed. (MFEWSErrorDomain error 56.)" occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
8/31/09 3:19:59 PM Mail[4279] * Assertion failure in -[ComposeBackEnd setAccount:], /SourceCache/Mail/Mail-1075/Compose.subproj/ComposeBackEnd.m:1522
ComposeBackEnd does not support explicitly setting an account
0 Message 0x00007fff876aa880 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff876aa7e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Mail 0x00000001001442ec 0x0 + 4296295148
3 Foundation 0x00007fff86ab9722 _NSSetObjectValueAndNotify + 258
4 Mail 0x00000001001428da 0x0 + 4296288474
5 CoreFoundation 0x00007fff87aae35c _invoking__ + 140
6 CoreFoundation 0x00007fff87aae22d -[NSInvocation invoke] + 141
7 Message 0x00007fff874ee0aa -[ThrowingInvocationOperation main] + 31
8 Message 0x00007fff874ed9ea -[_MFInvocationOperation main] + 275
9 Foundation 0x00007fff86ac611a -[__NSOperationInternal start] + 673
10 Foundation 0x00007fff86ac5dd8 ___startOperations_block_invoke2 + 99
11 libSystem.B.dylib 0x00007fff82515dc7 dispatch_call_block_andrelease + 15
12 libSystem.B.dylib 0x00007fff824f4341 dispatch_workerthread2 + 231
13 libSystem.B.dylib 0x00007fff824f3c80 pthreadwqthread + 353
14 libSystem.B.dylib 0x00007fff824f3b1d start_wqthread + 13
8/31/09 3:20:36 PM Mail[4279] * Assertion failure in -[ComposeBackEnd setAccount:], /SourceCache/Mail/Mail-1075/Compose.subproj/ComposeBackEnd.m:1522
ComposeBackEnd does not support explicitly setting an account
0 Message 0x00007fff876aa880 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff876aa7e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Mail 0x00000001001442ec 0x0 + 4296295148
3 Foundation 0x00007fff86ab9722 _NSSetObjectValueAndNotify + 258
4 Mail 0x00000001001428da 0x0 + 4296288474
5 CoreFoundation 0x00007fff87aae35c _invoking__ + 140
6 CoreFoundation 0x00007fff87aae22d -[NSInvocation invoke] + 141
7 Message 0x00007fff874ee0aa -[ThrowingInvocationOperation main] + 31
8 Message 0x00007fff874ed9ea -[_MFInvocationOperation main] + 275
9 Foundation 0x00007fff86ac611a -[__NSOperationInternal start] + 673
10 Foundation 0x00007fff86ac5dd8 ___startOperations_block_invoke2 + 99
11 libSystem.B.dylib 0x00007fff82515dc7 dispatch_call_block_andrelease + 15
12 libSystem.B.dylib 0x00007fff824f4341 dispatch_workerthread2 + 231
13 libSystem.B.dylib 0x00007fff824f3c80 pthreadwqthread + 353
14 libSystem.B.dylib 0x00007fff824f3b1d start_wqthread + 13
8/31/09 3:49:26 PM Mail[4279] * Assertion failure in -[EWSDelivery deliverSynchronously], /SourceCache/Message/Message-1075.2/Delivery.subproj/EWSDelivery.m:84
EWSDelivery doesn't have an EWSAccount, got (null) instead
0 Message 0x00007fff876aa880 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff876aa7e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Message 0x00007fff875f51e9 -[EWSDelivery deliverSynchronously] + 861
3 Mail 0x000000010007d120 0x0 + 4295479584
4 Mail 0x000000010007cc38 0x0 + 4295478328
5 CoreFoundation 0x00007fff87aae35c _invoking__ + 140
6 CoreFoundation 0x00007fff87aae22d -[NSInvocation invoke] + 141
7 Message 0x00007fff87506b51 -[MonitoredInvocation invoke] + 214
8 Message 0x00007fff874ee0aa -[ThrowingInvocationOperation main] + 31
9 Message 0x00007fff874ed9ea -[_MFInvocationOperation main] + 275
10 Foundation 0x00007fff86ac611a -[__NSOperationInternal start] + 673
11 Foundation 0x00007fff86ac5dd8 ___startOperations_block_invoke2 + 99
12 libSystem.B.dylib 0x00007fff82515dc7 dispatch_call_block_andrelease + 15
13 libSystem.B.dylib 0x00007fff824f4341 dispatch_workerthread2 + 231
14 libSystem.B.dylib 0x00007fff824f3c80 pthreadwqthread + 353
15 libSystem.B.dylib 0x00007fff824f3b1d start_wqthread + 13
8/31/09 4:00:06 PM Mail[4279] * Assertion failure in -[ComposeBackEnd setAccount:], /SourceCache/Mail/Mail-1075/Compose.subproj/ComposeBackEnd.m:1522
ComposeBackEnd does not support explicitly setting an account
0 Message 0x00007fff876aa880 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff876aa7e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Mail 0x00000001001442ec 0x0 + 4296295148
3 Foundation 0x00007fff86ab9722 _NSSetObjectValueAndNotify + 258
4 Mail 0x00000001001428da 0x0 + 4296288474
5 CoreFoundation 0x00007fff87aae35c _invoking__ + 140
6 CoreFoundation 0x00007fff87aae22d -[NSInvocation invoke] + 141
7 Message 0x00007fff874ee0aa -[ThrowingInvocationOperation main] + 31
8 Message 0x00007fff874ed9ea -[_MFInvocationOperation main] + 275
9 Foundation 0x00007fff86ac611a -[__NSOperationInternal start] + 673
10 Foundation 0x00007fff86ac5dd8 ___startOperations_block_invoke2 + 99
11 libSystem.B.dylib 0x00007fff82515dc7 dispatch_call_block_andrelease + 15
12 libSystem.B.dylib 0x00007fff824f4341 dispatch_workerthread2 + 231
13 libSystem.B.dylib 0x00007fff824f3c80 pthreadwqthread + 353
14 libSystem.B.dylib 0x00007fff824f3b1d start_wqthread + 13
Just wanted to report this issue in case this is something that other people are experiencing, and to see if Apple's engineers could look in to it. There is a simple workaround, which is to set up a regular SMTP server as the outgoing mail server for the Exchange account, and to use this instead of the outgoing Exchange server set up by Snow Leopard.
Thanks,
- maxHi MangeshDD,
Some other information for you:
Understanding Exchange Web Services Virtual Directories
If you still have other confused points, please feel free let us know.
Regards!
Gavin
TechNet Community Support -
Connecting oracle 10g express edition to jdeveloper
I am having all kinds of problems connecting oracle 10g express edition with my jdeveloper 10.1.3.3. I can query the database from my command line so I know it is set up, but for whatever reason jdeveloper will not connect with it. When I try to connect with the database through jdeveloper here is the error I keep getting:
Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
localhost:1521:ORCL
I have been all through the google results looking for an answer and have come to the conclusion that it is something with either the listerner file or the tns file, but as of yet have been unable to locate them. here are both of those files too.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = ##########)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = #########)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Please any help would be appreciated I have been at this for days, thanks.This has to be some kind of bug with 10g express because I see lots of people having similar problems. I'm in the process of uninstalling 10g, and I will re-install it see if that makes a difference. Again if anyone has any other ideas please keep them coming because this is utter BS it shouldn't be this hard.
-
SRM to MDM Scenario -- Unable to Edit the Integration Scenario
Hi Experts,
I'm doing a scenario in XI/PI from SRM to MDM.
I had downloaded all the related content from service market place and also established SLD connections as well.
When I'm trying to import the Integration Scenario from Integration Repository to Integration Directory I'm getting the follwing error.
Software component version with GUID 77891250-7da4-11d8-b240-e6890a114c15
does not exist (SWC_NOT_EXIST)
I'm unable to edit the integration scenario in IR even with PISUPER credentials which have all the access.
I'm also unable to edit any of the other objects as well (e.g.,Message Interface,Interface Mapping etc.,)
PFB the link where I pasted the error snapshot I'm getting when I'm trying to open the Integration Scenario in IR.
[http://picasaweb.google.co.in/prajwal24/MyScenario#5492932473682114498]
Can anyone please help me out on what can be done to edit the Integartion Scenario.
Thanks and Regards,
PruthviThanks kaushik and Salvi for your valuable inputs.
I have created a copy and now able to edit the Integration Scenario.
But again a new problem came up.
Now after editing the predefined scenario which has only SRM 5.0 and SRM 7.0
I need to add SRM 7.0 application component here in this Integration scenario and this was done successfully.
Now i need to add one send action and this send action is present in the SWC SRM SERVER IC 7.0.
I had downloaded the SRM SERVER IC 7.0 content already and I'm able to see in Integration Repository also.
But this SWC is not present in the application component SAP SRM (WITH SAP EBP) 7.0.
Please let me know what to do now inorder to add this send action in that application component.
Regards,
Pruthvi -
Unable to edit protected network
hello guys. i am using Nokia N97 Mini mobile. whn i try to connect my Wifi connection at University. it says unable to connect.
when i try to add a new access point from Settings>Connectivity>Destinations>New Access Point
it checks for new connection and found the Wifi Router... but whn i select to add it in my list. i get Error message... " Unable to edit protected Network".
though the Wifi router is set to Open Network and its public.... still i cannot access it... whereas everyone else is enjoying the connection....
can anybody help me with this problem.. and tell me if there is any solution available other then reinstalling the Firm....Your help will be appreciated... please help me!!@ sajjan
Delete your Uni accesspoint. Open the default browser, connect to the Uni accesspoint, you'll be redirected to a secure webpage to fill in your username and password.
@ jeandc
You have to set up a packet-data (gprs) connection as described on page 61 of the English manual.
http://europe.nokia.com/support/product-support/e72/guides
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
Failure - Unable to Start App - Fiori App
Hi,
I am getting the and error Failure-Unable to Start App when i am trying to start any App from my Launchpad.
Below is the error we are getting
2014-09-05 17:52:45 Failed to resolve navigation target: #PurchasingDocumentItem-display - Could not resolve link 'PurchasingDocumentItem-display' sap.ushell.renderers.fiori2.Shell.controller"
Any help would be appreciated.
Thanks
Sarves
Tags edited by: Michael ApplebyHi Sarves,
Can you please try clear cash.
You can also clean up your Model and RDP Cache by running (/iwbep/cache_cleanup) in ECC and in GW try (/iwfnd/cache_cleanup) please try it.
Regards,
Gurpal -
Hi,
We are getting "Failure - Unable to start App" and "Service SRA001_PCAPPROVAL failed. Contact your system administrator" error.
we have already activated the service and assigned the required role to User.
Regards,
Trilochan
Tags edited by: Michael ApplebyHi Masa,
we are able to see these services:
but we are not able to find service SRA001_PCAPPROVAL in
Activate and Maintain services (/IWFND/MAINT_SERVICE) .
Could you please guide us how we can get those Odate services for application ,what are the activities we have to perform.
Regards,
Trilochan
Maybe you are looking for
-
R12.1.1 staging complete! How to check whether the stage is Good
Hi Gurusl, I have completed staging R12.1.1 for Hp unix B.11.31. I want to know how to check whether the stage is good for installation or whether it is corrupted. Is there any metalink note or script from where we can check it. Ur help will be highl
-
Can't translate a selfmade Cube with MouseTranslate!
hello, 1st i'm very new to java3d, so please forgive me my unexpierience. Why is it impossible to translate (via MouseTranslate) the cube in the middle of the view? MouseRotation seems to be work fine. (i hope the pasted code is not to much, feel fre
-
My iPod Touch died, and I received a replacement from Apple. I restored it from my last backup, using iTunes. This reinstalled my apps as well. These included iBank Mobile and Documents to Go. I have the desktop versions on my MacBook. When I at
-
Need help with Calendar, nothing seems to be working!!!!!!!
Ok, I have been everywhere and can't seem to figure this out. About 6 months ago my calendar stopped syncing with outlook. It sync's 4,219 entries but my phone has over 6,000 entries! For some reason it won't sync everything. I am using DM 4.5 becaus
-
We are subcontractor u2026u20262
All SAP Gurus, Actual scenario is we are having two plants- say, Plant : 1000 (this is Export Oriented Unit) and Plant : 2000 (this is Domestic Unit) Plant 1000 is sending some material to plant 2000 for subcontracting subcontracting challan Plant 2