Connection from one PI 7.0 system to 2 SAP R/3 systems

Hi XI Experts,
There is a requirement as below:
I am using PI 7.0 system. This system has to be connected to 2 R/3 systems paralelly. That means, one XI system should be connected to 2 R/3 systems. Request you to suggest the best possible ways to do make this happen.
Please note that , PI system will have to connect to one 4.6C system(R/3) and one SAP ECC 6.0(R/3) system.
Kindly advise.
Regards,
Subbu

Hi
Yes,you can integrate multiple sap systems with PI.
1) Create a automatic Technical system for 4.6C system(R/3) using RZ70 in 4.6c...then create a business system for this.
2) Create a automatic tecnical system in sld for SAP ECC 6.0(R/3) system using rz70 in ecc and create a business system for this.
3) Also create TS & BS if any non sap applications are involved.
use this Business systems as per the interface requirements for sender & receiver
Regards
Abhijit

Similar Messages

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC).

HHola I update my Apple TV and I am frozen screen with the photo of Apple TV and iTunes symbol and a cable connected from one to another device, it happens and how to fix it Apple TV

HHola I update my Apple TV and I am frozen screen with the photo of Apple TV and iTunes symbol and a cable connected from one to another device, it happens and how to fix it Apple TV

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Can only connect from one direction

I'm having trouble video confrencing... I tried searching the forums, but I'm having trouble thinking of clever search terms.
I can only connect from one direction with one person. They can invite me to a chat and it works fine every time. However when I invite them it always fails. I can invite other people and it works fine though.
This doesn't seem like a typical router problem, because they can invite me and we videochat just fine.
This has been a problem for most versions of iChat that I can remember, but I'm using 3.1.5 currently.

Hi
Is the other person a PC user.
Tony

Script to pull all connections from one IP out of DPS access logs...

I need an efficient script to pull all of the connections for 2 IP's (or match the first two octets of the IP will cover both addresses also) from multiple DPS access logs out and write them to a file.
The current one-liner I've been using doesn't work well with multiple access log files. So I tried combining multiple logs into one access log, and then trying to parse that large log file (around . The problem is, I am now getting the error: "bash: /usr/bin/egrep: Arg list too long", which is because it takes all of the connection numbers and builds a grep with them.
Here is the one-liner I've been using:
FILTER='client=192.168.1.1|client=192.168.2.1'; FILE='access.*'; for j in $FILE; do unset CONN; for i in `egrep -h "$FILTER" $j | awk '{print $8}'`; do CONN="$CONN|$i"; done; if [ -n "${CONN+x}" ]; then egrep -h $CONN $j; fi; done | sort -t '/' -k2,2M -k1n
Is there a faster and more efficient way to pull out all of the connections from one or more IP's in access logs? I would think someone out there would have written something to do this?
Thanks everyone!!!
Edited by: keesor on Aug 17, 2011 2:49 PM

It could be as simple as
lgrep -O conn <IP> access
If you have more logs you can cat them and pipe the output to lgrep in a pipeline, like:
cat access.1 access.2 ... access.n | lgrep -O conn <IP>
Just make sure that the logs are listed in sequence. The script won't produce reliable results if the log is non-sequential.

How to reduce the number of Remote Gateway connections from one server

Hi ,
We have an XI 3.0 prod system which is being flooded every month end by the invoices generated in our ERP system and occupying all the gateway connections, what I see is that all the remote gateway connections are being established by our ERP server and still there are many requests waiting at the ERP server and failing.
When we ran the same in our test landscape, the invoices are getting transferred to XI with out any problems, the remote gateway connections are free even when the invocie Volumes transferred are the same in Prod and Test servers.
we are not considerint to Increasing the rdisp/max_gateways as the volumes of invocies transferred are really huge and in one of the test, we observed that when 40 invocies are transferred from ERP, it occupied 40 Remote gateway connections in our XI prod
We are looking for the option similar to our test system of transferring many requests from one connection. Is there any such specific option?
Regards,
Santhi Bushan.

Dear Santhi,
every gateway establishes only one connection to another gateway. If there are that many gateway/gateway connections, then you are probably connecting from more than one instance. You could circumvent this, if you use gateway options in the RFC destination being used, as this will force all outgoing RFC calls to go through a single gateway. This will then mean that the system has a single point of access.
Best Regards,
Tim

Remote Desktop Connection Times Out With "Can't Connect" From One Specific Computer Only

This is an odd one... I manage several servers from this computer. This particular server, 2012 Essentials, won't allow for remote desktop connections to either the server or attached workstations. I can get into the server's remote web page but when I
attempt a remote desktop connection, it hangs on "Initiating remote connection..." and then times out with the error response that remote desktop can't connect. But... if I attempt the same connections from any other computer, I am able to get in
and utilize remote desktop. Does this mean that there is a certificate issue with the computer unable to connect and if so, how does one remedy this? Or is it some other issue? I've attempted everything within my technical ability to no avail. Any suggestions
are greatly appreciated.

Hi,
Before going further, would you please let me know the RDC version that used in the problematic computer? Was it the same with other computers?
Please temporarily disable firewall and then check if this issue can be solved. Based on your current description, it’s hard to say the root reason of this issue.
So, I suggest that you should check relevant log files and get some clues. It will help us to narrow down and solve your issue.
Hope this helps.
Best regards,
Justin Gu

Connection from ONE VM to multiple X-displays?

Hallo,
is it possible to display AWT/Swing components on multiple X11 displays (not screens)
from ONE virtual machine? Each display has its own name/ip-address.
Thanx

From the command line you can only "export DISPLAY" to one machine.
But, have a look at java.awt.GraphicsDevice and java.awt.GraphicsEnvironment.
They look promising, returning an array of screens.
regards,
Owen

System Monitoring - add SAP PI 711 system

All,
I'm facing problems when I want to add the ABAP stack of my SAP PI 7.11 system...
I use Monitoring Setup Guide (CEN SAP NetWeaver 7.0 EhP 1, SPS 08) to do my setup --> Entering Monitored ABAP Systems with Release SAP NetWeaver 7.1 in ST03G.
Using transaction RZ21--> technical infrastructure --> Configure central system --> create remote monitoring entry.
Next, I choose for DualStack for the component type to be monitored. I fill in all the necessary data and save the entry.
Nothing happens and I do not see the system appearing in the system overiew list.
For single-stack ABAP systems, no problems appear and I can add them.
Please advice.
Thanks.

Dear Dimitri,
The problem is that these products
01200314690800000134 -- 9 -- I -- C
01200314690800000134 -- 34 -- I -- C
These products will need to be reverted to S ( SAP BASIS) from C (NON_SAP BASIS)
Since these are primary keys, you will need to copy and change the + existing record, and then delete the old one.
Once this is done, you will have to perform the following:
Call transaction SMSY. Chose System Groups and Logical Components.
Expand 'Logical Components' - 'SAP NETWEAVER'. Expand the product
instances 'Mobile Infrastructure' and 'Process Integration'. For all
logical components that have systems repeat the following procedure.
1. Check if the logical component is used in solutions using the where
    used button. If no, you can continue with the next one.
2. If yes, note which systems are assigned to which role.
3. Go to change mode and remove the systems from the logical component
     by selecting system SPACE with the value help.
4. Save. Check if a warning says that System monitoring is active.
5. Add the same systems again.
6. Save.
7. If system monitoring was active in a solution the customer should
    run the system monitoring setup for the solution again.
If you are not comfortable making these changes, you can raise a message with SAP.
However once this is done, then the SIDs will be offered and selectable.
Regards,
Paul

How to migrate Power View reports and respective BISM connections from one SharePoint environment to another?

Hello All,
We have a few Power View reports and respective BISM connections that need to be migrated from our DEV SharePoint 2013 site to our TEST Sharepoint 2013 site. The reports have been "migrated" over but they do not work. Eventually, I just recreated
all the Power View reports from the BISM connections.
We have to do one more Sharepoint migration, and I'd rather not have to recreate the reports. What do we need to do in order to migrate the Power View reports seamlessly?
Thanks,
Carter

I created a new BISM in the new SharePoint site with the same name and modified the cinneciton string in the report and uploaded the PowerView Reports ( download from the existing SP site ).
Please see the below link to modify the connection string in the PowerView report.
https://pivotstreamllc.zendesk.com/hc/en-us/articles/202123933-Editing-a-Power-View-Connection-String

Can you extend a wireless connection from one time capsule to another wirelessly?

We have two time capsules, one is connected to our modem and is transmitting a wireless network. It is in a really out of the way location, and we would like to set up a network printer in a different location on that network, so we got another time capsule (to hook up to the printer at a different location). Could we possibly extend the wireless network to the second time capsule with the printer attached so we could use the printer as a network printer? (If yes, HOW?)

Could we possibly extend the wireless network to the second time capsule
Yes, if the second Time Capsule is located where it can receive a good wireless signal from the other Time Capsule.
To test, move a laptop to the proposed location of the second Time Capsule. Log on using wireless on the laptop and spend some time to make sure that you have a good, solid reliable Internet connection. If you do, then the Time Capsule should work well at that location.
You would use AirPort Utility to configure the second Time Capsule to "Extend a wireless network". If you open AirPort Utility now as a test, can you "see" both Time Capsules there?
The reason that we ask is that you might need to check some settings on the "main" Time Capsule to be able to configure the second Time Capsule correctly.
with the printer attached so we could use the printer as a network printer?
If the same printer works on your Time Capsule now, then it should work on the second Time Capsule. If it is working now, you may not even need to re-install it again when it is connected to the second Time Capsule.
This is one of those times when you will not know if something will work until you actually try.

SQL Server/Client Version cross connectivity or in other words, connecting from one version of an SQL client to another version of an SQL server.

I wasn't sure, so I'm posting this question to understand better. If I have an SQL Server on SQL 2005 and a client running SQL 2000, can that client talk to the server? Also, if I had the opposite, a Server on SQL 2000 and a client on SQL 2005, is communication possible?
Thanks for the SQL help!

From my experience, a newer client with an older server cannot use a new data type either. I tried this with a SQL Server 2008 R2 client against a database on a SQL Server 2000 instance.
declare @myDate1 date
Result...
Msg 2715, Level 16, State 3, Line 1
Column or parameter #-1: Cannot find data type date.
Parameter '@myDate1' has an invalid data type.

How to open multiple db connections from one form?

Hello,
We have two different Oracle databases and need to access them (read and write) from the same form. Is there a way to do this, apart from using EXEC_SQL as described in Note 67516.1 ? I could also use db_links and synonyms, but this would add an extra maintenance aspect that I'd like to avoid.
Thanks,
:-Phil

Sorry Phil,
but that's all you got.
Frank

Managed System configuration for SAP NW Java system in Solution Manager 7.1 SP10

Hi All,
I am doing Managed system configuration for my SAP NW 7.01 Java system and getting below error in step 6 create users SAPSUPPORT & SM_COLL_SID.
"An unexpected error occured. An error occured while processing the UME command READ_USER from agent <hostname> : Server returned: 302 Found "
I have checked my DAA as well as host agents are up and running fine. My Solution Manager is 7.1SP10.
Please suggest.
Regards,
Manish

Manish,
Which UME you are using? portal/ABAP/LDAP
Are you using the SOLMAN_ADMIN user while configuring.
Also check the below forum.
https://scn.sap.com/thread/1167282
Regards,
Raja. G

BI Reporting from one system for other countries

Good Afternoon
I need all the information I can get around doing reporting from one central BI (in SA) to different countries. The systems utilized in these countries are not SAP Systems and it seems that access to the specific systems may not be possible. Information around Project Management, hardware, access, IT Related issues etc will be highly appreciated.
We will be on BI 7.0 in two months. (Currently on 3.0)
Thanks in advance
Cornelius Faurie

Hi Cornelius,
You can connect to any system using SAP BI. It is not necessary to have all ur heterogenous systems to be SAP. You can connect and get data from any non SAP in to ur BI. So that you can use all the features that a tipical Datawarehouse system Provides. But to get data from such number of hetergenous systems of different countries you have to wrok a lot for data extraction. ou can make use of severtal data retrival mechanisms that BI provides.
For example please fo through these links which explains u how to get data from different systems:
[http://help.sap.com/saphelp_nw70/helpdata/EN/e9/6bf2d90e533f409ee56d3f586c325a/content.htm]
Revert back for further queries.
Regards,
Rajkandula

Connection from one PI 7.0 system to 2 SAP R/3 systems

Similar Messages

Maybe you are looking for