Connection from SAP 4.0B System to IBM MQ Series
Hi
is it possible to connect <b>SAP 4.0B</b> System with <b>IBM MQ Series 6.0</b>,is the connection supported by SAP 4.0B?
If supported I am confused with what is the <b>RFC Destination</b> to be used
is it <b>R/3 Connections</b> or <b>TCP/IP connections</b>
Thanks in advance
Warm regards
Rajasekhar
Hi Anup
Thanku for your valuable input, here in the TCP/IP connections can you please suggest what are the
<b>ACTIVATION TYPE</b> to be used there are 4 radio buttons, is it the
<b>Registered Server Program</b> OR
<b>Start On Application server</b>OR
<b>Start on Explicit Host</b> OR
<b>Start on Front End Work Station</b>
if it is the registered server program what are the values to be used for <b>PROGRAM ID</b>
is it required to make any changes in <b>SAPRFC INI File</b>
Thanks in advance
Warm regards
Rajasekhar
Similar Messages
-
Connection from SAP to our systems involving 2 saprouters
connection from SAP to our systems involving 2 saprouters
we have 1 saprouter inside a dmz and another for connecting to our systems.
we are guessing that this is possible
SAP (sapserv2) -
SNC----> saprouter1 (DMZ, SNC connection) -
> saprouter2 (P * * 3200) ---> SAP1, SAP2...
But how could we do that?
How can we let SAP know that they need to connect to 2 saprouters instead of 1?
The "Mantain System Data" in sap service marketplace only lets us introduce 1 saprouter.
And how should be the saproutettab of the 2 saprouters?
saprouter1:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 000.00.00.00 *
P * saprouter2 3299
saprouter2:
P * * 3200
P * * 3600
is that possible?
Many thanks !!Hi
As far as my experience goes with this you have to maintain both router information in oss1 tcode
Also mention second router on the second router tab on the SMP data
I hope it should work with that as it will automatically create router table -
How to check connection from SAP to reservation system?
Dear Experts,
May I know how to check whether the connection between SAP and the reservation system has been set up and ready to use?
Thanks.Hi
You need to check the identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
External reservation system In the Travel Planning subcomponent Travel Management accesses an external reservation system connected to R/3 to carry out the queries on available travel services and to book the selected services. The reservation system currently available is the AMADEUS Global Travel Distribution system.
For more information, see Technical Prerequisites for Travel Planning--
Technical Prerequisites for Travel Planning
Before you can use Travel Planning fully, a number of internal R/3 and external prerequisites or settings must be fulfilled.
Connection to an External Reservation System
The online booking function in Travel Planning is based on the cooperation with external reservation systems that are used to communicate with the service providers. The R/3 user has access to the following functions via the connection to an external reservation system:
u2022 Availability query of travel services
u2022 Transfer of additional information about selected travel services
u2022 Price information
u2022 Processing of reservation by the respective provider
u2022 Synchronization of the data in SAP Travel Planning if external booking changes have been made
In the current release the external reservation system in use is AMADEUS Global Travel Distribution. AMADEUS is a subsidiary of Lufthansa, Air France, Continental Airlines and Iberia. The reservation system it provides is in worldwide use and 160,000 terminals in 37,000 travel agencies and ticket sales centers in over 130 countries are connected to it.
In order to carry out online booking via AMADEUS the following must have been carried out:
u2022 Your enterprise must have signed an agreement with AMADEUS for the use of the interface and be registered at AMADEUS with a user ID
u2022 A network connection to the AMADEUS computer center must have been opened
u2022 The identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
For questions about registration, contact the SAP & AMADEUS Competence Center:
SAP & AMADEUS Competence Center ACC 02 Neurottstrasse 16 69185 Walldorf Germany
Cheers
Mukta -
RFC connection from SAP to AS400 system
Hi ,
I am working on a Interface requirement wherein I need to get connected to AS400 fetch some data and update in Shipment Document in SAP at runtime.
I am thinking about calling RFC but not sure whether it will work or not.
Has anybody worked on the requirement like this.
please help me out with this regard.
thanks in Advance,
NitinHi Nitin,
RFC works other way around. Means you can login from other system to SAP to get the data using RFC. For your requirement you can ALE.
Regards,
Atish -
HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA APPLICATION
HI expects,
HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA or . DET APPLICATION.please provide me some scenarios and documents.please help me.Hi,
In the sender side i.e. in SAP system you can use IDoc/RFC/Proxy to push the data to XI.
IDoc supports only Async communication and in Sync case performace is good using Proxy.
In the receiver side you can use Java Proxy to connect to the Java application or you can even bulid a webservice over the Java/.Net application and use SOAP adapter to post data to it.
Thanks
SaNv... -
Connect from SAP gateway to RFC server failed - Java StandAlone app X SAP RAC System
Dears,
I'm developing a Java application (RFC SERVER) with JCo3 and I need to connect to SAP RAC system.
I have configured the TCP/IP connection via transaction SM59, but when I try to start my server I face the error below (dev_jco_rfc.trc):
==========================================================================================
**** Error file opened at 20140714 112024 Brasilia Time Rel 3.0.10 (2013-08-08) [720.440]
Error: >Mon Jul 14 11:20:24,636< RfcException: [null]
message: Connect from SAP gateway to RFC server failed
Connection parameters: TYPE=A DEST=VSPAGUE ASHOST=cpe1601 SYSNR=01 SAPROUTER=/H/155.56.49.28 PCS=1
LOCATION SAP-Gateway on host ld7624.dmzwdf.sap.corp / sapgw01
ERROR hostname 'cpe1601' unknown
TIME Mon Jul 14 16:20:25 2014
RELEASE 740
COMPONENT NI (network interface)
VERSION 40
RC -2
MODULE /bas/740_REL/src/base/ni/nixxhl.cpp
LINE 193
DETAIL NiHLGetNodeAddr: hostname cached as unknown
COUNTER 3
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
==========================================================================================
This problem happens when my app executes the line:
JCoServer myServer = JCoServerFactory.getServer(myServerName);
My system properties:
jco.client.lang=EN
jco.destination.peak_limit=10
jco.client.client=800
jco.client.passwd=********
jco.client.user=********
jco.client.sysnr=01
jco.destination.pool_capacity=3
jco.client.ashost=/H/155.56.49.28/H/cpe1601
jco.server.connection_count=3
jco.server.gwhost=/H/155.56.49.28/H/cpe1601
jco.server.progid=VSPAGUE
jco.server.gwserv=sapgw01
jco.server.repository_destination=VSPAGUE
Using SAP Logon i can connect to server cpe1601 system E16 without problems.
Please, I really need some help, because my knowledge on SAP platform is minimum.Hi Markus,
Changing ASHOST=ld7624.dmzwdf.sap.corp as you have suggested, I got the error message: Connect to SAP gateway failed ...
As you could see, the host I'm connecting is from SAP RAC Service.
Here in our company we have only SAP Logon and my RFC Application, and I can connect to SAP remote system via SAP Logon with this settings:
System Connection Parameters
Description: SAP ECC 6.0
Application Server: cpe1601
Instance Number: 01
System ID: E16
SAProuter String: /H/155.56.49.28/H/
Below the connection information I received from SAP RAC SUPPORT for testing purposes:
E16 System:
SID: E16
Client: 800
System Number: 01
Server: cpe1601
Component Version: SAP ERP Central Component 6.0 Enhancement Pack 6 Suite on HANA
User: ********
Password: ********
SAProuter String:
If you don't plan to use SAPRouter at your end,
/H/155.56.49.28/H/ -
SAP DB Connection from SAP BI on HP UNIX to MS SQL External Database
Dear All,
Greetings!
I have a scenario to configure a SAP DB Connection from SAP BI System on HP UNIX 11i to the external legacy system MS SQL 2000 Enterprise for data upload. I am interested in connecting the SQL server as a Source System to the BI System.
I read through documents mentioning about installation of a Client driver in the SAP BI System, I also downloaded the JDBC client software and tried installing the same, but the steps as mentioned Setting the CLASSPATH or connecting to the server did not work.
Please help me in connecting the SQL Server as Source System, I would like to know in detail about the same - so kindly help me with the links to documents and guides about the same.
Thank you
Regards,
Vineeth DamodarShort answer: this does not work.
Long answer: To connect directly to the database you need
- a database client for the source system
- a database interface library for the source system
Both of them are not available for HP-UX if the target database is SQL server --> doesn't work.
What you can do is: add a Windows application server to your BI system (heterogeneous installations work and are supported) and add there the database client and the database interface library.
Markus -
Connection from SAP ERP 6 to B1i2007
Hello,
the test-connection between B1i and SAP is working, but when trying to test the connection from SAP to B1i, SAP gives the error mesaage that "the program is not registered".
The B1i-System seems to be not registered in the SAP and it is only shown as "external client" (and not as registered server).
Another problem is that in B1i we have entered as programID-name "B1iRFC" but SAP shows "tomcat5" as TP-name.
I thought B1i would register automatically on the SAP with the name of the programm-id entered.
Do we have to change someting in the tomcat-server or where to find the problem?
Thank you,
PeterHello Eddy,
thank you for your answer, but in R/3 I define a RFC-connection with a registered server programm by using the programID out of the B1i-RFCP-configuration, right?
And when trying to make a test-connection, I got an error message that there is no registered program with this programID.
I thought that B1i have to be registered in SAP or in the SAP-Gateway with the name of this programID.
I think my problem is the registered server program in R/3. Where do I get this program and how to register in the R/3 gateway? Isn't the tomcat-server this program?
Best regards,
Peter -
Hi,
I have (stupid perhaps) question.
Is this scenario possible:
SNC connection from SAP GUI to SAP Router, and non-SNC connection from SAP Router to SAP System.
I know how to set up scenario like this:
SAP System --- (non-SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP GUI.
Best regards,
Marek MajchrowskiWolfgang,
To be sure myself and Marek understand, can you confirm the different scenarios supported:
Scenario 1:
SAP GUI --- (non SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP System
With this scenario, it would be possible for a user to logon using SAP GUI onto the SAP System, but without SAP GUI SNC.
Scenario 2:
SAP GUI --- (SNC conn) --- saprouter1 --- (non SNC conn) --- saprouter2 --- (SNC conn) --- SAP System
With this scenario it would be possible to logon to the SAP System using SAP GUI, and using SNC authentication.
Also, with this scenario the SAP GUI software and SAP System software would consider this to be similar to:
SAP GUI -- (SNC conn) -- SAP System
Scenario 3:
This is the scenario mentioned by Marek in his initial question:
SAP GUI -- (SNC conn) -- saprouter1 -- (non SNC conn) -- SAP System
With this scenario it will not be possible to logon to SAP System using SNC, and only possible if the SAP GUI is configured to not use SNC. In other words the SNC connection between SAP GUI and saprouter1 is available, but cannot be used.
Thanks,
Tim
Edited by: Tim Alsop on Feb 25, 2008 5:24 PM -
Problem in connection from SAP to XI
Hi Guys,
I have problem to connect from SAP to XI. We have existing SAP R/3 (IS-H) and we newly installed XI. We decided to use ABAP proxy to send data from SAP to XI. When I go to SPROXY system showing No Connection to Integration Builder. Please kindly advice what configuration we need to in SAP side in order to connect XI.
Its Very Urgent. Please advice me.
Thanks in Advance.
Regards,
Anil.Anil,
could you please have a look to SAP Note 689847 - XI 3.0: SPROXY - No connection to the Integration Builder
Cheers,
-Sunil -
Is direct connection from SAP BI 7.0 to XCelsius already available?
Hello,
Is direct connection from SAP BI 7.0 to XCelsius already available?
ThanksIn Xcelsius SP2, visualizations can be connected to an SAP system and use live data returned by an SAP query.
Refer Xcelsius SP2 what's new guide:
http://help.sap.com/businessobject/product_guides/xcelsius2008SP2/en/sp2_xcelsius_new_en.pdf -
Driver to connect from SAP PO 7.4 on Sybase to third party SQL anywhere 12
Hi All, We have PO 7.4 on Sybase 16.01 and wants to connect third party SQL anywhere 12(Sybase). We have already the Driver: jconn4.jar in the location --> /usr/sap/SID/J00/exe/sybjdbc in the PO system. Do we need to have any other driver for connection from SAP PO 7.4 on Sybase to third party SQL anywhere 12(Sybase). Please suggest. Regards, Karthik.
Hi Karthik,
I guess PO comes from Process Orchestration with Netweaver ?
Anyway to be able to connect to a remote database, from Netweaver you need a DBSL. It comes with Netweaver kernel: the lib_dbsl required to connect to ASE and IQ (and IQ uses SQLAnywhere ODBC), but there is not specifically to SQLAnywhere (even if the ODBC used for IQ is the ODBC of SQLAnywhere). I guess that *maybe* you can try using your current Sybase lib_dbsl. I don't know how you configure remote connections from PO (with Netweaver it would be done with DBCO t-code) and to be honest I won't be sure it is a supported remote connection.
Regards,
Victoria. -
Crystal report- Connect from SAP gateway to RFC server failed
Hi All,
I am trying to connect to a SAP R3 system from crystal reports but it gives me below error.
Please note : Transports have been imported and also the roles CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER. My user is a member of these roles which were release along with Best practice reports v1.31
Error :
Logon failed.
Details: CMALLC : rc= 27 > Connect from SAP gateway to RFC server failed
Connect_pm GWHOST=10.10.4.63, gwserv=SAPGW30, SYSNR= 30
Location SAP-gateway on host ply.log.com/sapgw30
Error timeout during allocate
TIME ....
Release 700
Component SAP Gateway
Version 2
RC 242
Module gwr3cpic.c
LINE 1996
Detail no connect of TP sapdb30 from host 10.10.4.63 after 20 sec
Can you please help us solving this error.
Thanks
ChetanHi Stratos,
The SAP Version is ECC 6.0.
The below transports have been imported.
u2022 Open SQL Connectivity transport (K900574.r21 and R900574.r21)
u2022 Info Set Connectivity transport (K900575.r21 and R900575.r21)
u2022 Row-level Security Definition transport (K900576.r21 and R900576.r21)
u2022 Cluster Definition transport (K900585.r21 and R900585.r21)
u2022 Authentication Helpers transport (K900578.r21 and R900578.r21)
Thanks & Regards,
Chetan -
Connect from SAP gateway to RFC server failed
Good day and a happy new year to you all!
I am failing to connect to my SAP BW system from BEx. The logon fails with this message:
>>>>>Start<<<<<<<<<<
Error Group
RFC_ERROR_COMMUNICATION
Message
Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=10.16.64.77, GWSERV=sapgw02, ASHOST=10.16.64.77, SYSNR=02
LOCATION SAP-Gateway on host bwsys / sapgw02
ERROR timeout during allocate
TIME Sat Dec 31 13:16:19 2005
RELEASE 640
COMPONENT SAP-Gateway
VERSION 2
RC 242
MODULE gwr3cpic.c
LINE 1785
DETAIL no connect of TP sapdp02 from host 10.16.64.77 after 22 sec
COUNTER 2
>>>>>>>>>END<<<<<<<<<<<<
I only experience this problem when connecting using any BEx component, but, I can successfully connect to the SAP BW system from SAP gui.
Additionally, I have the service 'sapdp02' defined in the services file, both on the workstation and the server.
What could be wrong or missing in my configuration?
Regards,
Joao.hi Joao,
check if oss note 447882 relevant
you may ask basis for help
Symptom
You want to access the customer system using the BEx Analyzer.The connenction fails:The system displays the error RFC_ERROR_COMMUNICATION.In the detail screen, the system displays message "Partner not reached" (host 192.168.4.2, service sapgw 00).
Other terms
SAP Gateway, RFC_ERROR_COMMUNICATION, partner not reached
Reason and Prerequisites
The SAP gateway host is deactivated or the TCP/IP port 33xx (where xx corresponds to the system number) is not open.
Solution
Issue statement ping <IP address> (In this example:192.168.4.2) No reply: Boot SAP Gateway host required.
An answer:Check whether the TCP/IP port 33xx is open (where xx corresponds to the system number) and start the SAP gateway.
The TCP/IP port is also partially defined in the services file as an sapgw<SID> or sapgwxx entry (where xx corresponds to the system number). The services file is in the Windows directory or in WinNT/System32/drivers/etc. -
Error: Connect from SAP gateway to RFC Server failed
Hi
I am trying to connect SAP server using the java (JCO connection), and getting following error. While I am able to connect to the same sever using SAP Logon pad with the same ipaddress (hostname) and logon credentials.
Please kindly help.
Erro: Connect from SAP gateway to RFC server failed.
Connect_PM GWHOST = hostname, GWSER = sapgw03, ASHOST=hostname, SYSNR=03
LOCATION SAP-Gateway on host hostname / sapgw03
ERROR timeout during allocate
TIME Wed Oct 31 05:31:45 2007
RELEASE 640
COMPONENT SAP-Gateway
VERSION 2
RC 242
MODULE gwr3cpic.c
LINE 1795
DETAIL no connect of TP sapdp03 from host hostname after 22 sec
COUNTER 3Hi K Patil,
Acording to me you are faceing this issue because the entry of your backend System is not in the SLD (System Landscape Directory ) of your server.
to make this work you have to make entry in the SLD of your server
fort that plesae acess this link.
Re: JCo connection Error
Re: wt is SLD.. how to do configure it
Please Reward Points if Helpfull.
Regards
Vinit
Edited by: Vinit Soni on Dec 19, 2007 7:20 AM
Maybe you are looking for
-
Hi Can some one help me to find resources for Bank analyser and BW extraction and sample reports. and how it work, some scenarios. Thanks Babu
-
will upgrade to iphoto 9.2 on MacBook allow photo stream on iPad? I just got an ipad and I want to share photos between my macbook (mid-2007, OS 10.7.5) and the ipad. Will I have to buy iPad iPhoto app, too inorder to share pix?
-
iPhoto Slideshow: Sometimes the slideshow starts at the last image, rather than the first. How do I ensure the slideshow commences at the first image?
-
Saving to network in admin mode
My hard drive recently died and I had to reinstall Captivate 6 in the new drive running Windows 7. Upon doing so, I started seeing a Captivate message saying I must run as administrator in order to use all it's features. After checking the Windows se
-
PC with windows XP and iphone with ios 5.01