Connection Group is published as 2 seperate packages

I have the weirdest issue in App-V 5.0
we use Windows 7 SP1 Clients with App-V 5.0 SP1
I add 2 applications to the App-V Server seperately :
SQL Navigator 7 & Oracle 10.2
they're both unpublished!
I made a new Connection Group named SQL Nav 7 & Oracle 10.2 and added the 2 packages.
when I publish the connection group ,the clients are getting the group ok for the first time.
after they logoff and logon - the connection group "Breaks" and they get them as 2 seperate packages THOUGH THEY AREN'T PUBLISHED AS PACKAGES!
there's nothing on the eventlog, I tried to sequence both of the packages again and - nothing. same result
any ideas ?! :/
Tamir Levy

OK. thanks everyone
some newer details:
I the command Get-AppVClientConnectionGroups and I get no output
when I ran Get-AppVClientConnectionGroups -All I got this output:
GroupId            : 7419b9fa-d1b8-43b8-a83e-6e2183290899
VersionId          : 3b40c4f1-3761-4aa2-9daf-961ce74e6278
Name               :
IsEnabledToUser    : False
UserPending        : False
IsEnabledGlobally : False
GlobalPending      : False
InUse              : False
InUseByCurrentUser : False
PercentLoaded      :
Priority           :
didn't understand what's the difference... but I was able to remove the connection group and the packages manually
then when I ran a manual sync via PowerShell I got this error:
Sync-AppvPublishingServer : There were errors encountered when trying to publish connection groups from the server
Operation attempted: RefreshPublishingServer.
AppV Error Code: 070000000F.
On the event viewer I see these errors now:
EventID: 1008
Category: Configure Package
Package {55182fc7-3f23-42b6-ba89-5c90c3300d80} version {1e373fdb-9e0d-4160-9f81-d80374ab9130} failed configuration in folder 'C:\ProgramData\App-V\55182FC7-3F23-42B6-BA89-5C90C3300D80\1E373FDB-9E0D-4160-9F81-D80374AB9130' with error 0xA040132A-0x3.
EventID: 19108
Catogory: Publishing Refresh
Failed to publish group due to the failure of the package.
Group GUID: {7419b9fa-d1b8-43b8-a83e-6e2183290899}
Group Version GUID: {3b40c4f1-3761-4aa2-9daf-961ce74e6278}
Package GUID: {55182fc7-3f23-42b6-ba89-5c90c3300d80}
EventID: 19106
Catogory: Publishing Refresh
Part or all groups publish failed.
published: 0
failed: 1
Please check the error events of 'Configure/Publish Virtual Application Connection Group' before this message for the details of the failure.
any help will be appreciated!
Tamir Levy

Similar Messages

APP-V 5.0 SP3 Connection Group error

Hi there,
After the upgrade whenever I try to publish a connection group this fails. It's a newly created connection group with 2 global published applications (which worked in app-v 5.0 sp1).
The error I get is:
Mandatory package {d2da0bdd-0613-4662-80ae-abf60f65a286}, version {9270b6bf-8681-4030-a1cc-904a105e5e1d} specified in connection group {43bbe1a4-6d83-4fc2-a916-68241f86d2c6}, version {957bb2b5-1c8e-450d-8cb3-783dfee6a240} has not been added to the computer
or has not been entitled to the user.
And after that:
Failed to create package group descriptor document from string.
Group: {43bbe1a4-6d83-4fc2-a916-68241f86d2c6}, {957bb2b5-1c8e-450d-8cb3-783dfee6a240}
Error code: 0x43E04109 - 0x14
Any idea's?

Hi there,
It was my mistake and the way we published app connection groups in the past. In the past we published the applications directly through an connection group without publishing the applications themself. In app-v 5.0 sp3 I needed to publish the packages itself
also....

Uninstall deployment for an AppV5 application with Connection group fails if using a User Collection but works on Machine Collections.

Hi,
I'm having troubles to understand why my application in AppV5 that was sequenced with "MS. AppV Sequencer SP1" is somehow failing to be uninstalled properly only if this on is deployed with a
User collection but on the other hand the same application installs & uninstalls perfectly if its deployed using a
Machine collection?
Here is an extract of the Appenforce.log:
Remove-AppvClientPackage : Operation failed because package belongs to a
connection group on the machine. Please ensure that package does not belong to
any connection groups.
Operation attempted: Remove AppV Package.
AppV Error Code: 020000050C.
Please consult AppV Client Event Log for more details.
Au caractŠre Ligne:1 : 106
+ import-module 'C:\Program Files\Microsoft Application
Virtualization\Client\Appv ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : InvalidResult : (:) [Remove-AppvClientPackage],
   ClientException
    + FullyQualifiedErrorId : RemovePackageError,Microsoft.AppV.AppvClientPowe
   rShell.RemoveAppvPackage
I know that SCCM 2012 does not uninstalls application prerequisites unless they are targeted by their individual uninstall collection or script an uninstall procedure on the main application. But if I try using the Machine collection the error is not appearing
and the main application is removed and the Prereq will be left behind without causing any trouble at all !!
So my question is: Why an APPV5 application with a connection group should be pushed in a Machine context ?
Notice that I already tried to do the troubleshooting to remove the application manually with PowerShell.
- set-executionpolicy unrestricted
- Import-Module AppvClient
- Get-AppvClientPackage -Name PackageName*
- Unpublish-AppvClientPackage $PackageName
- Remove-AppvClientPackage $PackageName
And actually it was removed but the problem started again if I tried to re-install /remove the application.
Will really appreciate your comments.
Kind Regards.
Joel E.G.

Hi Paul,
To be honest we already experienced many troubles after the SCCM console was migrated from R1 to R2, SCCM client was updated too in consequence, but our AppV5 client still remains on SP1.
I'm afraid that any application that uses Connections Groups will have to be pushed on a Machine context and I just wanted to really understand more about this subject of why it was working that way and not by User is there something I missed with (Run Virtual)
that for any reason is not perfectly implemented to run on a user context?
Any way, we will be testing AppV5 Client SP2 really soon because we have no choice.
Regards,
Joel EG

App-V 5.0 Connection Groups not syncing to Client

Hi,
i have installed an App-V Management Server and successfully created and published packages to a client.
I
then tried to create a Connection Group for some Internet Explorer
Plugins, which works on the server (adding packages, assigning to a
group, publishing), but fails to get synced on the client.
The client is listing all packages, but no connection groups.
App-V Management Server Version 5.0.1224.0
App-V Client 5.0 SP1 - 5.0.1104.0
I tried 5.0 SP2 Client before, but had the same problem...

If you assigned the packages and CG to a user, you can open a browser on the client machine (with that user) and connet to the Publishing Server URL. This should return above XML.
Note that changes on the Management Server by default take 10 minutes to get replicated to the Publishing Server - and then a sync-appvpublishingserver is required on the client to get the info down there.
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

App-V 5 Connection Groups on Client

All,
I am having an issue with a specific connetion group. If my tech's remove the connection group and applications and do a sync from with powershell the connection group does not appear in the client console or in powershell. If I run a get-appvclientconnectiongroup
-all, i see that it is there but I get the following:
Name               : Intranet
IsEnabledToUser    : False
The connection group is deployed to users and not to the machine. I do see in the operational log that the connection group was successfully configured.
Virtual application connection group {guid} version {guid} was successfully configured
In the client-catalog debug, there is a Package {guid}, version {guid} was not found in the user Catalog.
Our current client is 5.0 SP1 HF 3, but I have also verified the same behavior happens with 5.0 SP2 HF 4 as well.
My enviroment:
Management/Publishing Server App-v 5.0 SP1 HF2
Brian

Thank you Ben but...
Thats where I run into issues with the connection group. If I remove the computer connection Group and packages using the commands above, the connection group(s) do not come back. If I get-appvconnectiongroup -all, I can see that App-V
does see the connention group, but does not enable it for the user.
Name               : Intranet
IsEnabledToUser    : False
Brian

Error when enabling the connection group with office 2013 and a plugIn

Hi,
I've created the office 2013 proplusVolume with ODT, published it globaly, Sequenced the plugin, with only the office 2013 as a published app-v package on the system, made the connection group with correct xml, but when I enable the connection group, I got
the error:
The connection group {xxx} version {xxx} could not be published because the
virtual COM settings of the individual packages conflict.
Verify that the virtual COM settings are the same for all member packages and try again.
The COM settings are made the same as the office package on the plugin package, but I still have the same error.
The Deployment-, and user-XML have this values (as it was for the office originally):
<COM Mode=”Integrated”>
<IntegratedCOMAttributes
OutOfProcessEnabled=”true” InProcessEnabled=”true” />
<Objects Enabled=”false” />
Why do I get this error?
Why is it merly impossible to track down the realy error?
What can i do to make this connection group work?

Right now the catalog is pulling from the AppXManifests inside the AppV Packages. You can see these settings by renaming the AppV file to .ZIP and browsing those files (READ ONLY) to see the default COM settings. Simply changing the Deployment Config files
is not enough. You will need to make sure the information is dynamically applied at publishing by specifying the -DynamicDeploymentConfiguration option when adding the package using the Add-AppvClientPackage cmdlet. You do not need to worry about the UserConfig
file.
If you are doing this in band with the management system, you would import this configuration in under Advanced Configuration for the package.
Steve Thomas, Senior Consultant, Microsoft
App-V/MED-V/SCVMM/Server App-V/MDOP/AppCompat
http://blogs.technet.com/gladiatormsft/
The App-V Team blog: http://blogs.technet.com/appv/
The MED-V Team Blog: http://blogs.technet.com/medv
The SCVMM Team blog: http://blogs.technet.com/scvmm/
“This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.”

App-V 5.0 connection group odd behavior

I am having some odd behavior with an application that I've packaged in App-V 5.0. We are running App-V for RDS on Server 2012, and I'm on SP2.
The problem I'm having is with a program called SQL Tools 1.6 (a 3rd party tool, not from MS or Oracle). It's a fairly straightforward program, and it runs fine on App-V 4.6. But it requires an Oracle client to run. On App-V 4.6, we have
the Oracle client installed locally on the server. But with App-V 5, I wanted to make use of connection groups, so that we could use multiple Oracle versions, if necessary, and so that updating Oracle would be easier. So I have a connection group
that contains SQL Tools and the Oracle client.
What is happening is that when I try to launch SQL Tools, I get an error saying it can't find OCI.DLL (which is in the Oracle path). I took apart both packages, trying to make sure that the Oracle path variable was correct. I even added the Oracle
path to the SQL Tools package (I even tried hard-coding the local path to the Oracle package). I always get the same error. I also swapped the priority of the two packages, but it didn't help. Then I tried launching a command prompt in the
context of the SQL Tools package. When I checked the path variable, it was correct, and had the path to oci.dll. Out of curiosity, I tried running SQL Tools, and it launched no problem. Then I closed it and tried to launch it from the shortcut
on the desktop, and got the same error as before. I've tried launching it from various places (desktop shortcut, direct path to the executable, a command prompt without specifying the context of the SQL Tools package, etc.), checking compatibility mode
and setting it to various settings (XP SP3, Windows 7, Run as Administrator on and off, etc.), but nothing seems to work except opening a command prompt in the context of the SQL Tools package, and then running SQL Tools from there. As a workaround,
I created this short script that launches a command prompt in the context of the SQL Tools package, and then runs SQL Tools from that command prompt:
$p = Get-AppvClientPackage -Name "SQL Tools 1.6"
$cmd = '"C:\ProgramData\App-V\BB0D9EC0-3876-42EB-A5E9-92A149D52FB5\37F941F9-B4BA-425F-9FB4-9B699843E767\Root\VFS\ProgramFilesX86\SQLTools 1.6\SQLTools.exe"'
Start-AppvVirtualProcess -FilePath cmd.exe -ArgumentList "/k $cmd" -AppvClientObject $p
It works, but I would rather not have to use this type of workaround for something that should work natively.
Any help would be greatly appreciated.
Thanks,
Sam

Hello,
What happens if you launch CMD instead of your tool when starting an application, and from that CMD you start sqltools.exe
So the command to start the application would be;
cmd.exe /c sqltools.exe
Nicke Källén | The Knack| Twitter:
@Znackattack

I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

As note already on the iBA forum [ AppleID for ibooks publishing ], you need two IDs. You can't use your developer ID.
If you already signed up for books with that ID, you need to talk to Apple to straighten things out.

HOW TO CREATE A CONNECTION IN BI PUBLISHER WITH VARIABLE ENTRY

I've created one user(say BIPUB1) from AS OIDDAS portal and assigned him XMLP_ADMIN role. I've 10 other users with whom I will share a report. Each user has different authorization(VPD based). Now I want to create a BI-publisher report using a discoverer report(owner BIPUB1) as datamodel and share that report with all 10 users. But all these 10 users should view data based on their authorization defined in OIDDAS. How should I
achieve it?
Can I create a JDBC connection from BI-publisher Admin tab with variable userid and password. When user will logon to BIpublisher portal with login_id and password given in OIDDAS, these variables will capture those values of userid and password and show the report data as they individual user has authorization? Or otherwise please suggest how to maintain authorization. Thanks..

are you talking about BI Publisher Desktop or BI Publisher Enterprise Edition?
BI Publisher Desktop is just for building templates.
You can connect to DB by BI Publisher Enterprise Edition.
for details look into the user guide in the following link
http://www.oracle.com/technology/products/xml-publisher/xmlpdocs.html

Error when publishing a PL/SQL package as a Webservice

Hi all,
I am using the JDeveloper (10.1.3.1.0) to publish a PL/SQL package as a Webservice, and I am having some troubles on the generation process.
The problem that I am facing is on the generated code for the database side, where some methods have a “$GET_” at the end of its name.
This “$GET_” is handled by the database as a special word, and the package can’t be compiled.
If the ‘$’ character is removed from all the methods, the package can be compiled and the Webservice works fine.
What’s wrong? Is there a bug on the generation process of the JDeveloper?
Regards,
Rui Torres

OK, This is the PL/SQL package:
Function:
FUNCTION Obtener_paises RETURN res_webservice AS
v_respuesta res_webservice;
i PLS_INTEGER:=1;
CURSOR C_paises IS
SELECT cpais, tpais
FROM paises
ORDER BY tpais;
BEGIN
v_respuesta := res_webservice(null,null);
v_respuesta.error := res_error(null,null,null);
v_respuesta.error.cerror := 0;
v_respuesta.error.cerror_ora := 0;
v_respuesta.error.terror := null;
v_respuesta.datos := res_datos ();
FOR v_pais IN C_paises LOOP
v_respuesta.datos.extend;
v_respuesta.datos(i) := reg_datos(null,null);
v_respuesta.datos(i).codigo := v_pais.cpais;
v_respuesta.datos(i).descripcion := v_pais.tpais;
i := i + 1;
END LOOP;
Insertar_log(NULL,SYSDATE,'C','Obtener_paises',NULL,'ERROR:0');
RETURN v_respuesta;
EXCEPTION
WHEN OTHERS THEN
v_respuesta.error.cerror := 1;
v_respuesta.error.cerror_ora := SQLCODE;
v_respuesta.error.terror := substr(SQLERRM,1,80);
Insertar_log(NULL,SYSDATE,'C','Obtener_paises',NULL,'ERROR:1 '||substr(SQLERRM,1,120));
RETURN v_respuesta;
END Obtener_paises;
TYPES USED:
CREATE OR REPLACE
TYPE res_webservice AS OBJECT (error res_error, datos res_datos);
CREATE OR REPLACE
TYPE res_error AS OBJECT (cerror NUMBER(1), cerror_ora VARCHAR2(12), terror VARCHAR2(80));
CREATE OR REPLACE
TYPE res_datos AS TABLE OF reg_datos;
CREATE OR REPLACE
TYPE reg_datos AS OBJECT(codigo VARCHAR2(12), descripcion VARCHAR2(150));
Thanks in advanced...
Could happen this bacause of these defined types???

How to export and import connection groups

Hi,
as the actual sqldeveloper kills the connection.xml file quite frequently i always back it up in another place. As I have more than 30 connections, i group them together in connection groups. After reimporting the connections, the groups are gone.
Where is the grouping information stored and how can i back up this information.
Regards
Oliver

I don't think there is any way to back this up through the product (as the folders are stored separately from the connections), but the product-preferences.xml file in the C:\Documents and Settings\<user>\Application Data\SQL Developer\system1.5.3.57.83\o.sqldeveloper.11.1.1.57.83 directory (Win XP SP2 and SQL Dev 1.5.3) has the following details (amongst the other preferences):
<ide:preferences xmlns:ide="http://xmlns.oracle.com/ide/hash">
   <hash n="DatabaseFoldersCache">
      <hash n="Folders">
         <hash n="IdeConnections">
            <list n="folder name 1">
               <string v="connection name 1"/>
               <string v="connection name 2"/>
            </list>
            <list n="folder name 2">
               <string v="connection name 3"/>
            </list>
         </hash>
      </hash>
   </hash>
</ide:preferences>I have never tried (I have always manually recreated my folders when needed), but if you have a copy of this file and put the DatabaseFoldersCache node back in after reimporting your connections, this might reinstate your folders.
theFurryOne

Error in OFR : "No database connection string set for connection group"

Hi all..
In OFR, Batches Fail To Export When Line Pairing is Enabled and Batch Remains in State 750 With Error "No database connection string set for connection group".
I have followed all steps associated to line pairing with database still my batch is not exported..
Any help is appreciated..
Thanks in advance

Hi,
in case you haven't done this already: for this problem we'd really need you to open a CSS message.
From your problem description it sounds likely that LCA routines and liveCache user don't fit together. Please check the solution of note 811207 to see if that assumption is correct.
Furthermore: liveCache 7.5 and SCM 4.0 are not released together (yet). When using SCM 4.0 only liveCache versions 7.4.03 Build XX are released. This it seems you're current combination is not supported!
Please take a look at PAM (Produkt Availability Matrix) on the SAP Service Marketplace to see which combinations have been released.
Kind regards,
Roland
Message was edited by: Roland Mallmann

App-V Server : Changing Connection Group Name through powershell.

Hi,
Is it possible to change the name of existing Connection group through powershell ?
I've tried using Set-AppvServerConnectionGroup but i was unable to change the name of existing group.
Thanks,
Sumit.

Do this:
$group = Get-AppvServerConnectionGroup -Name "Connection Group A"
$group.name = "Connection Group B"
Set-AppvServerConnectionGroup $group
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

The publisher of the uploaded package does not match the expected publisher . The publisher for this app is expected

I have a Windows Phone Silverlight 8.1 project that i am trying to publish
The publisher in the uploaded package does not match the
expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
I have the same Publisher Id set in the WMAppManifest file
help me
thank you

Hi kadir u,
>>The publisher in the uploaded package does not match the expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
Based on the error information, we can see that the publisher value does not have the correct one. So please try to open the Package.appxmanifest, then modify the Publisher as "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358":
<Identity Name="*******"
Publisher="CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
Version="1.0.0.0" />
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The publisher in the uploaded package does not match the expected publisher.

I have an existing Windows Phone 8 application in which I wish to release an update to. This update includes new features as well as targets the 8.1 platform. Because of an unknown problem with the original Visual Studio project
where the app stopped being able to be deployed to test devices, it was faster to create a new Visual Studio project and copy over the existing code and assets than try and find the issue in the original project. This lead to the publisher GUIDs being different
between the new and original projects.
Now when I try and submit the updated package within the Windows Phone Online dashboard I get the following error message "The publisher in the uploaded package does not match the expected publisher. The expected publisher
for this app is: "CN=0745C81D-D1ED-49ED-A219-C546B5F31DE5"".
I have updated both the WMAppManifest and Package.appxmanifest so that they have the following attributes and information:
Package.appxmanifest (PhonePublisherId="0745C81D-D1ED-49ED-A219-C546B5F31DE5")
And
WMAppManifest (PublisherID="{0745C81D-D1ED-49ED-A219-C546B5F31DE5})
I have then recompiled the app and uploaded and attempted to resubmit the update but I still get the error that the Publisher does not match. What have I missed??

This sounds tricky... perhaps you can do a search in the entire app for the GUIDs and replace them.
Also, you could build the appx package, rename the .appx to .zip, and open it up to see if you can find the wrong publisher id anywhere and it might give you a clue to where to make the change.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Connection Group is published as 2 seperate packages

Similar Messages

Maybe you are looking for