Connection help before Imac G5 purchase
Hi,
Looking to purchase a Imac G5 as soon as I can put my mind at rest regarding some connection issues.
The Imac will be the main computer. I currently have a PC and a broadband connection with BT (although the modem very old and I don't think it is Mac compatible), I am planning on getting rid of this computer altogether. I also have a laptop PC which is currently wirelessly linked to the main PC. Basically what I need to know is what would be the most suitable solution to connect the Mac to broadband but would still like to keep the wireless connection with the laptop. I would prefer to stay with BT.
Welcome to Discussions!
The Mac will be compatible with the existing modem as both use TSP/IP.
You should look at a wireless router/switch to go between the modem and your Mac and PC. They'll come with at least one hardwire port so you can plug the Mac into it.
Similar Messages
-
What does it mean when my ipad is in Recovery mode? It's connected to my imac for software update and it says I must "restore" the ipad before itunes can be used. Will I lose everything on my ipad?
Unless you have a backup from which you can restore, yes you will lose all of your data and settings.
You should be able to sync your content back to the iPad if you have been syncing with iTunes all along. If you don't sync with iTunes, you can download much of your paid content again for free as long as you use the same Apple ID. This explains downloading past purchases.
http://support.apple.com/kb/ht2519
Unfortunately, at this point, you must restore the device before you can move on. There is nothing you can do to avoid it now. -
PLEASE help before I throw my iMac G4 out of the apartment window
Hello Apple Experts.
I hope that you can help me out here before I throw my iMac G4 out of the apartment window!!!!
I am having major problems with my wireless connection on my iMac G4(Uses original Airport Card).
When I installed 10.4 the connection was just very weak and not all the bars on the Airport icon were highlighted.
Also, on occasions the connection was totally lost and the iMac didn't even see the base unit (non apple) whilst it was switched on.
Now that I upgraded to 10.4.10 (using the PPC combi update), the Imac does not see or connect to the base unit at all.
As far as I know the card and antenna is conneted properly as I followed the Apple set up guide.
I know that the base station is fine as I have another mac in the house that connects with no issues....
I am wondering if there is a general issues with the iMac G4's connecting wirelessly with the Airport Card.
It seems there maybe three problems here.
1) There is an issues with the software update
2) There is a problem with the Airport Card (although it is brand new)
3) I need to configure someting to make it work!
Hope someone can help me here.
Thanks for your time.
Optimistique1I'm getting the same problem. Probably since 10.4.10 but I can't be sure. I am have just been perplexed at why my other machines are working OK and my iMac G4 17" 1Ghz is having network problems. It has the original Aiport Extreme Card inside. I was Googling and saw a suggestion to delete all your "Network Locations" then start fresh. I've just tried that and I'm running a ping for a while to see how its performing. I think its improved but the signal read only 2 bars still when my MacBook Pro right next to it read 100%.
Somebody must know something? -
For awhile, since the newest update, I'd noticed when charging the ipod (classic) that it stopped going to the charging screen and would stay on the Connected: Eject before disconnecting' screen. But, y'know, didn't matter to me, it still charged... until today when I tried to add music. Tried it many times, reset it... STILL wouldn't transfer songs... It would 'say' it was syncing, but then suddenly stop and stay on the same Connect: please eject before disconnecting' page. I did a couple of times get a message about scanning it but, after restoring that never popped up again...
So, I do a system restore on it and ofcourse THAT works, but it STILL won't sync! So, now I've got an ipod with no music that won't sync and because it's all gone on there, I'm not sure how to back up my stuff (should I need to re-install iTunes... Though I doubt it'd work...)... So, yeah, I tried a different cable too, still no luck...
There has GOT to be some way to fix this!
Please somebody help me out! I so freaking appreciate it you have NO idea!I think the problem is that the iPod got set to Manually manage music and videos. It needs to be set up for automatic syncing again. Just unchecking that Manually manage music and videos setting does not do it.
In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen. In the sidebar (along left side of screen), there are two headings (Settings and On My Device). Under Settings, click on Music. To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
Check the box at the top for Sync Music. That turns ON automatic syncing for music. Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod). Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below. Then click Apply. -
Hi everyone, I was wondering if someone can help me. I recently got my first ever Ipod. It's the new Ipod Nano 7th Generation. I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens. I have tried uninstalling & re-installing Itunes but this didnt help.
Does anyone have any ideas?
Thanks for your help.I think the problem is that the iPod got set to Manually manage music and videos. It needs to be set up for automatic syncing again. Just unchecking that Manually manage music and videos setting does not do it.
In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen. In the sidebar (along left side of screen), there are two headings (Settings and On My Device). Under Settings, click on Music. To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
Check the box at the top for Sync Music. That turns ON automatic syncing for music. Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod). Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below. Then click Apply. -
Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!
Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?
-
HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5
Hi guys, been reading your forums, blogposts, etc and am getting more confused. I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.
Good news,, I dont need a super giant system, I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
I want to get imac 21.5 or 27 if i have to.. So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
I want to be able to have firewire add on, but the rest is what I need help with. So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there. I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
WHAT DO I REALLY NEED MINIMALLY FOR NOW? WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
cs6:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
Any responses would be great. I know you guys are busy answering the really high end tech questionsAll the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine. They will also run Final Cut Pro X just fine. Ditto for most any application you may want to use.
Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
Notes on purchasing a 21.5" iMac
All 21.5" iMacs come with 8GB RAM but you cannot add more later. I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
The basic hard drive is a 1TB 5400rpm drive. It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives. Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
Notes on purchasing a 27" iMac
All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS. There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also. There are also SSD drive options, but I do not recommend them. (Same comments as above.)
Notes on all the current iMacs
iMacs no longer come with built-in CD/DVD drives. If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
Be aware that Macs always come with the latest (most recent) version of OS X. And OS X Mavericks (10.9) is due to be released soon (in the next month or two). There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks. If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
For what it's worth, I'd recommend the 27" iMac if your budget can afford it. You will appreciate the larger screen size and added capabilities over the years you will use the computer. -
Apple TV 2 is asking for network time before I can purchase a movie? Even restarted it and still did the same thing.
How do you fix this? My wifi is operating 100% connected and I can access the Itunes Movies etc. How do I get it to work again?Welcome to the Apple Community.
If you've had it working previously, try restarting the Apple TV by removing ALL the cables for a 30 seconds, or a restore if the problem persists. -
A printer that I have connected to my iMac via usb in not showing up in printer options on my iPhone or iPad and it use to before I upgraded to 8.1. How can I fix this?
Is it an Airprint-compatible printer, and is its WiFi enabled if it is? (see: About AirPrint)
If it isn't an Airprint supported printer, then you need a 3rd party driver on your iMac to print from an iPhone. Such as Printopia. As it worked in the past you probably have such a printer driver installed; check and see if it's running.
Beyond that try restarting the printer, restarting the phone, restarting your router, and restarting your computer. -
Where can i find the chassis file for import in MAX for drawing connection diagram before purchasing
where can i find the chassis file for import in MAX for drawing connection diagram before purchasing
chassis: NI PXIe-1078
thxThis board is for an obsolete product called Measure - an add-on for Excel. Please repost with details on exactly what you mean by 'chassis file'.
-
I have a Free Agent external backup hard drive connected to my iMac Intel desktop via USB, I never unplug it. Why do I get an error message, from time to time, upon startup stating, "Disk was disconnected improperly. Always eject disk before disconnecting."?
I never unplug the external harddrive, and the error message comes up only occassionaly upon startup. Maybe the USB connection gets disrupted enough to cause the computer to see it as disconnected and then reconnected while the iMac is powered.
-
Hello... the airport (wifi) connection on my imac is oftenly "freeze" and need to reconnect again. Can everyone help to solve this problem? It's not happened to other computer on the same network in the same area (distance). Thanks a lot.
Hello,
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
If that doesn't work try changing channels on your Router. -
Hi can someone please help, my imac crashed, when i try to start it up, it just beeps loudly 3 times, then there is a pause before it beeps 3 more times, this just continues to happen, any sugestions? please help
allanpar wrote:
i am having to use my laptop to post this question, missing my imac so much, its just not the same using this slow windows laptop.
Then maybe it's time to buy a new Windows notebook.
The RAM has either gone bad or somehow become unseated. Also there is the chance that the RAM slots have failed. -
I cannot retrieve the password for the wifi connection on my imac and so cannot access the internet with my ipad at home. I have a cable modem. Help please!
If you mean that you cannot remember the password for your WiFi network this will work for you - or it should work if you are the administrator on the Mac.
You will need to be logged in as the administrator on your Mac and you must know the password - Open Keychain Access on your Mac in the utilities folder, click on Passwords. Find the Airport Network Password listed on the right. Double click on it. Click on show password in the the window that pops up. Enter your administrator password when prompted and click allow.
If Keychain is locked - you must enter the administrator password there as well to unlock it and access the password.
If you have set the Mac up for Internet Sharing for the iPad to share the Mac's connection, just create a new network On the Mac with Internet sharing and a new password. -
Help connecting device to imac
hey guys,
need to know if/how i can connect a device to the imac.
its a programming device with a VGA outlet. it can be connected to screens and projectors with ease just as you would with a pc.
but for work purposes it has to be connected to an imac.
my cilent would also like the ability to easily switch between the imac and this programming device.
i have read online that youill need the thunderbolt to VGA adaptor.
but have not seen any replies saying that it has worked ?
Thanks
AnthonyWhat do the manufacturer of the device recommend?
Maybe you are looking for
-
How to write a composite element in iterator?
Hi, I want to write a composite element in iterator which has the same result as BSP element like this in BSP layout: <htmlb:link id = "link1" reference = "http://www.sap.com"> <htmlb:textView id = "text1" textCo
-
My ipod touch 4th gen won't remember passwords
HI everyone, my ipod touch used to remember passwords, then I had to change some that expired, so I told it to 'forget' passwords, now it won't remember the new ones! how can I fix that? thank you
-
How to get data from bean using selectmanycheckbox
Am not able to understand how to get selectmanycheckbox data of datatable from backing bean help me on this thanks
-
My ipod stinks!! It won't do nything except keeps reseting WONT CHARGE
If I get it erviced will it lose all my songs? Does anyone know how to stop it from reseting?? I tried everything on the website!!
-
Change af|train::stop-icon-visited_hover in PS6
Hi: I am using PS6. I want to change the train icon to be our custom icons. I found that I have problem getting rid of the background image in the css class: .af_train_stop-icon-unvisited:hover and .af_train_stop-icon-visited:hover I tried to select